Airport Utility can no longer find my airport wireless devices

I have sucessfully installed a new Airport Extreme and Airport Express in the house and everything including iPad, Apple TV, Sonos and iPhones are all connect up and running fine.
I am using a Laptop running Windows 8 that is also connected and on line.
I tried to connect a WD external hard drive this morning. Since then when I open the Airport Utility on my Laptop an error message appears stating that "Airport Utility unable to find any Airport wireless devices."
This isn't creating any real problem as I dont have an urgent need to access the Utility programe but does anyone know why this error has occurred and what I can do to rectufy the problem?

Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

Similar Messages

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

AirPort Utility was unable to find your Apple wireless device after restart

I keep getting this message when I try to setup my time capsule.
"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
After this message, the time capsule cannot be seen in the airport utilities at all either, and requires a reset before it becomes visible again. I've tried renaming the network and the time capsule itself to shorter names without punctuation as I'd read sometimes helps, but it doesn't seem to work. I don't have an internet connection set up yet, but that shouldn't be a problem, as I've selected not to connect to the internet for now, and am just wanting to back up my computer for the moment. What is happening here?

probablythestrongest wrote:
I keep getting this message when I try to setup my time capsule.
"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
After this message, the time capsule cannot be seen in the airport utilities at all either, and requires a reset before it becomes visible again.
Until you can complete the Time Capsule configuration process, I recommend that you connect it to your Mac with an Ethernet cable instead of depending on a Wi-Fi connection. That would make a lot of sense given the rest of your situation, as it would make your backup process a lot faster.

Myairport utility can no longer find my time machine or Air port express

can any one help my airport utility can no longer find my time machine or Air port express

Try connecting an Ethernet cable from your Mac to the Time Capsule to see if that allows AirPort Utility to "see" it.
By the way, don't confuse "Time Machine",backup software included with OS X since version 10.5, with "Time Capsule", an Apple Wi-Fi base station with an integrated disk drive.

AirPort Utility is unable to fine any Apple wireless devices.

Just installed Airport Extreme. Went beautifully:
- iMac (OSX 10.5) can connect wirelessly to Internet,
- IBM ThinkPad (XP, SP-2) can connect wirelessly to Internet,
- iMac can print to printer connected to the USB port of the AE
But if I try to administer the AE from IBM ThinkPad rather than from he iMac, though, and the AirPort Utility simply responds that "AirPort Utility is unable to find any Apple wireless devices [RESCAN]. Even though it is currently connected to the Internet using one .
Do I have to join a network or otherwise tell he Windows machine about the AE somehow for it to "see" it? I don't know where to turn.
Apple's doc on this subject is typically nonexistent.
Any help is GREATLY appreciated.

I do not believe that I solve this easily. I have restarted everything, connected directly wtih CAT6, patched my XP, reset the AE, etc. The ThinkPad is a work computer, and I believe that my issue is most likely related to some level of super-firewall-encryption-keep-me-same-from-everything kind of stuff that has been installed by my company, stuff which I am not going to try to find, remove, or shut off just so I can configure the AE from here.
I have an old XP desktop connected to the AE through CAT6 that is able to read and manage the AE's configuration, and of course my iMac sees it perfectly. That will be good enough for now.
Thanks to all who suggested solutions.
KAS

After port forward, airport utility can no longer see my time capsule

I tried to forward public port 1025 to private port 80 on a raspberry pi using airport utility. But after I did that, the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
Thanks,
Michael

It doesn't sound like a port that is used.
From the standard google search.. nope.
Reboot the whole network..
No luck tell me what OS version you are running the utility on and what model and firmware TC???
Note with Yosemite, anything can and will happen.

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

"Airport Utility was unable to find your Airport after restarting"

Airport Express B has been working great for two years, and suddenly it can't be found in Airport Utility.
When I hard reset it, and re-set it up again, I go through the whole procedure, using the Utility to write the new settings : "The settings for this Airport Express have been successfully updated...waiting for Airport Express to restart" and at that point nothing happens - the light stays continuously green, no restart, and shortly afterwards I get the failure message "Airport Utility was unable to find your Airport wireless device after restarting".
I come out of Airport Utility, reopen it, and it can't find the Airport Express. Nothing. A £65 brick that has ceased to be, and this forum is full of people with similar problems. I've tried all of the fixes, including hard-wiring it using Ethernet, and again it goes through the whole procedure abut when trying to restart the AE, fails to find it.
Are Apple making any response to these issues ?

Thanks Martin - I can download it from the Apple website, according to this discussion :
http://discussions.apple.com/thread.jspa?threadID=1085243&tstart=30
My concern is that a) it may not work with an Intel MBP, and that it may break my Airport - totally. Could you let me know what you're running it on ?

"Airport Utility was unable to find your airport wireless device"

I recently bought an Airport Extreme to replace a D-Link DGL4300. My network is as follows: DSL > Modem > Airport Extreme > Ethernet and Wireless clients (wireless clients include my iMac and my wife's MacBook). This worked fine for about 2 weeks, until my wife's MacBook started having connectivity issues. I did a soft reset on the Airport Extreme, and . . . poof. No internet for anyone. I did a hard reset and used the saved profile that had previously worked (for at least my computer), and after the Airport Extreme restarted, I received the dreaded "Airport Utility was unable to find your airport wireless device". I have repeated this cycle several times with complete power-downs of the modem, the Airport Extreme and all clients, with no change in result.
What's odd is that even though Airport Utility can't find the Airport Extreme, my home network works fine (i.e., all clients can talk to an internal media server and each other), but there is no internet at all. Any ideas?

Alex Fisch wrote:
"Airport Utility was unable to find your airport wireless device"
Until you can complete the configuration process, try connecting your Mac to the AirPort Extreme with an Ethernet cable to see if that allows AirPort Utility to see the Extreme.

Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglenn

When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

HT203167 i rented a movie on my ipad a few weeks ago. i haven't watched it yet but can no longer find it on my device or anywhere. Thoughts?

rented a movie on my ipad a few weeks ago. i haven't watched it yet but can no longer find it on my device or anywhere. Thoughts?

You can't re-download it after it has expired (if that's the case).
You could try to contact support, and you MAY get an exception...
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

AirPort Utility was unable to find any AirPort base stations...

I recently purchased a new AirPort Extreme base station 802.11n, and I followed the manual to get it set up. I installed the software, but when I launch AirPort Utility it cannot detect my base station. (I get the above error message).
I've got an old G4 desktop mac (QuickSilver model) running OSX 10.4.10, and it's got the original AirPort card installed. I've made sure AirPort it turned on in my menu bar.
I decided to set up my base station by connecting an Ethernet cable directly from my base station into my Mac, and set up my network that way. But as soon as I try it wireless, then AirPort utility looses the base station.
My base station is connected to a Netgear ADSL2+ Modem Router DG834. (The router and my internet connection are working fine). I've got all solid green lights on the router and the base station.
Is there some compatibility issue with my old AirPort card and my new base station? Or do I have a faulty card maybe?
Any advice appreciated.
Thanks, Tom.

I have the same setup as you and I had problems like yours. For some reason the old airport card doesn't seem to work with the new airport extreme base station if you are using WEP encryption. WPA works fine. In order to connect to your new base station so that you can administer it with the new Airport utility try this first: If the airport icon is displayed on your tool bar, click on it and select other. Enter your network name and password. With a little luck you will now be connected to your base station and it will be found by airport utility. If that doesn't work. Press the rest button on the back of the base station and hold it for at least one minute. That should completely rest your base station so that it is not encrypted. You should then be able to select it from the drop down menu when you click on the airport icon on the tool bar. Once you are connected, airport utility will find it.

Airport Utility can not see my 2 airport express.

It does see my airport extreme but it has stopped seeing the 2 express stations. I have had this set up for years and play iTunes to stereo systems in 2 different rooms in the house. But it just crashed and lost the connections to all three base stations. I have been able to reset the Airport Extreme but Airport utility now will not find the 2 Airport Express units that I have. These units are 802.11g capatible.

I have been able to reset the Airport Extreme but Airport utility now will not find the 2 Airport Express units that I have.
Suggest that you perform a Factory Default Reset on each AirPort Express (AX) and then reconfigure them to "join" the wireless network that is being provided by the AirPort Extreme.
Power down the AX for a moment
Hold in the reset button and keep holding the reset button in while you plug the AX back in to power
Release the reset button 8-10 seconds after you plug the AX in to power
Allow 40-45 seconds for the AX to restart back to a slow, blinking amber light
At this point, the AX is providing a wireless signal with a name like Apple Network xxxxxx. You must log on and connect to this network (no password is required) first, then open AirPort Utility, select the AX and click Continue to follow the guided setup.
You also have the option of configuring using Ethernet by temporarily connecting an Ethernet cable from your PC to the AirPort Express if you do not want to configure it using wireless.

After configuring my airport express, airport utility can no longer see it.

Configuring airport express seems to make it invisible to itunes and the airport utility that configured it. This seems to have started happening since Yosemite.

Sorry, can you explain what you mean by the AirPort Express is invisible to iTunes.
In any case, it sounds like something glitches when setting up the APE. Reset it using these instructions, then configure it again to see if that helps:
Resetting an AirPort base station FAQ

Airport Utility can no longer find my airport wireless devices

Similar Messages

Maybe you are looking for