Airport Utility does not see Base Station but I'm still online

I have an original airport base station and just downloaded Airport Utility 5.5.1
The base station is working because I'm online with it posting this thread.
But Airport Utility 5.5.1 does NOT see it...
The strange thing is that I have one of the early dome Airport Extremes here as well. That one IS recognized but the Airport Utility.
Anyone have any suggestions as to why the original Airport is not showing up in the utility even when I know it's obviously being seen by my card and connecting to the web?
Thanks
g

Did you power cycle your network as follows?
Power everything on the network down, order is not important
Wait a few minutes, then start the modem first and let it run a few moments by itself.
Then start the next device connected to the modem and let it run a few moments.
Then start each device the same way until everything is up on the network.

Similar Messages

Airport Utility does not see base station

Hello,
I just got an Airport Extreme. I am able to connect to it from mac and pc running vista but I am not able to see the base station from the airport utility on the windows platform. I can see it from the mac. Any ideas why - am I missing something on the windows platform.
Thanks
Praveen

Thanks for your answers. I found this answer in a different thread. Once I unchecked CheckPoint VPN software - the base stations now show up in Airport Utility.
Re: iTunes 7 for Windows Vista: AirTunes won't connect to remote speakers
Posted: Jun 25, 2007 6:06 AM in response to: Vanlew Reply Email
I had same frustrating problem.
I was able finally to restore AirTunes.
In Local Area Connection Status.Properties
In the "uses the following Items" list,
Item "Check Point SecuRemote" appears.
This is the VPN CLient that was installed to let me log in to my office network from home.
Uncheck SecuRemote, OK; iTunes Speakers button shows.
Check SecuRemote, OK; iTunes Speakers button disappears.
This looks like a bug in Checkpoint Software.
In your case, something else may be interferring.
Other OS Vista 32 bit - SecuRemote beta for Vista

Airport utility does not support base station? Help!

I cannot get base station light to turn green. Blinking amber. I upgraded to a new Verizon modem and since then the base station does not work. What can I do?

Make sure the new Verizon Modem is not also a WiFi Router, if it is then that may be your issue. If it is indeed just a Modem then your Ethernet Connection should work and your base station should be working. You said "Airport Utility does not support base station". Don't know what you meant by that. Do you have an Airport Extreme, Airport Express or a Airport TC as a Base Station? If yes, you should be able to set up your Network via Airport Utility. If the Verizon Modem is only a Modem then unplug the power from your Airport Base Station, then unplug the Power from your Verizon Modem for at least 1-minute. Plug the Modem back in and give it a moment or so, then make sure you do have an Ethernet cable going from your Verizon provided Modem to your WAN port on your Airport Base Station. Now power up your Airport Base Station and go to your Airport Utility. Find the Base Station and click on Edit... Make sure your Network Name is correct, your Password is Correct, your Security method is correct (example: WPA2 Personal). If all correct see if your blinking Amber light is now Solid Green.

Airport Extreme utility does not see base station.

The utility doesn't see the base station, yet I can connect and surf the internet. I have noticed that the light is flashing yellow, but I don't know how to stop it or turn it to green. I am using XP.

If you have wireless turned on and you do not have security enabled, it will flash amber. You can over ride the flashing amber in the utility, or if you are hardwired, just turn the wireless function off.

Airport utility does not recognize base station

My airport utility (5.5.3) does not recognize my base station or express after changing internet providers (moved to ATTUverse). I know the network works (recognized by wireless devices). Everytime I do a "rescan" nothing appears. Running OS 10.72 on Core 2 Duo iMac; all software up-to-date; restarted all devices. Help

It sounds like you may have an older version of the AirPort Express.
Please look on the side of the device in the faint print to locate the model number. It will start with an "A" followed by four numbers......as in A x x x x.
If you could post back with that information, we will know more about how to answer your question.

AirPort Utility does not support base station

"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." What?

Support for any older, 802.11b-g only AirPort Base Stations is gone in Mavericks.
The last of them has been discontinued for over six years.

Airport Utility does not see Airport Extreme Base Station

Purchased Airport Extreme yesterday at Apple Store to replace old Netgear Router. Wanted wireless network to work with 2 identical HP Laptops running XP with SP3 and 2 iPod touches, and possible future purchases of iPad 2 and Apple TV. Installed Airport Utility software from CD on Dell Studio running Windows 7. Connected Airport Extreme to cable modem and Dell Studio. Ran Airport Utility software to configure Base Station but it did not recognize the Base Station. Base Station had blinking amber light. Did have internet connectivity on Dell Studio, and wireless internet connectivity on 2 iPod touches, and on one HP Laptop. No wireless internet on other HP Laptop. But wireless internet connection was unsecured and Airport Utility did not see Airport Extreme so could not configure it to make it secure. Contacted Apple Customer support. After 30-40 minutes of attempting several different possible fixes only able to use Airport Utility to configure Airport Extreme remotely, wirelessly, from one HP Laptop, not the Dell Studio that is directly connected to the base station. Now that the base station is configured the network is secure. However, second HP Laptop cannot connect to primary wireless network. I created password protected "Guest" network using Airport Utility, and laptop is able to connect to this Guest network. From reviewing forums am now able to configure Airport Extreme with Airport Utility by using "Configure other" on Dell computer. But utility cannot find device by scanning. Would like to find way to (1) have Airport Utility on Windows 7 Dell see Airport Extreme by scanning and not using "configure other," and (2) have 2nd HP Laptop connect to primary network and not "guest' network. Any assistance would be greatly appreciated. Thanks.

Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
Any help would be greatly appreciated.

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

Airport Management Utility on new MacBook Pro does not see base station

I have an old "flying saucer" Airport base station. I
recently started using a new MacBook Pro. Airport
connection is fine, Airport Admin Utility works normally,
but Airport Client Monitor 1.0 shows blank graphs and
Airport Management Utility 1.0 does not "see" the
base station. I don't know if the problem is the
change to Tiger, to Intel, or to AE card. MacStumbler
and friends also are "blind".
MacBook Pro Core 2 Duo Mac OS X (10.4.8)

Try rebooting the airport, then going to airport utilities and go thru the set up proceedure following the prompts. Also go to system prefernces in location select automatic.

Connected to Airport WiFi Net but Airport Utility does not "see" the AE(n)

Have both the Airport Extreme (g) and (n). Have no problems with the AE(g) which I am using now, but the AE(n) somehow does not appear in the "Airport Utility".
I see the new AE(n) in the Airport Finder selection tool and I connect to the AE(n) network WiFi. The connection is successful and I get all of the vertical black semi-circles showing connection. Then I open Airport Utility and attempt to scan to see the AE(n) and it does not appear.
I've tried to hard reset the AE(n) and configure using Ethernet. The AE(n), appears in Airport Utility when attached by Ethernet. Once configured. I disconnet the Ethernet cable and connect to the new WiFi network but the Amber light flashes, the AE(n) does not connect successfully to the DSL modem and my iMac (Core Duo) Airport Utility program fails to "see" the new base station. I am going nuts. Pls help.
I did read through other problems and the troubleshooting section and did not come accross this same problem.

Spent 75 minutes on the phone with Apple support. At the end of the day learned a few things.
1) Hold down control key to get additonal wireless config options including one which allows 802.11b/g only
2) Using "Other" as a network option in the Internet Connect application solves the problem that only "WPA" password is allowed while I have configured my AE to WEP. You need to type in the AE network name but you are allowed to choose the correct password schema
3) Using "Network Utility" and pinging 10.0.1.1 found out that I had 90% packet loss and that my new AE(n) is most likely defective and in need of replacement...
After all that am back to using my AE(g).

Airport Utility can't find base station, but station works fine

I recently purchased an AEBS. The network seems to be working fine (I have an iMac flat panel (10.3) connected via Ethernet, an iBook (10.3) connecting wirelessly, and a Mac mini with 10.4 connected wirelessly). However, airport utility doesn't see the base station. Should I be concerned?

Got my answer from previous posts -- had to do a hard reset *while the device was plugged in and wait for the flashing green light* then it all worked fine. thanks !

HT3728 airport utility does not see my time capsule

I got a Time Capsule for Christmas, have hooked it up, turned it on, then the Airport Utility. The airport utility has not found it - I have reset it using the button on the back several times and still nothing. I have also restarted my computer, which is a new macbook pro, but nothing.
Advice please! I am new to Mac and am quite frustrated, considering returning the Time Capsule, if I can ...

That was not helpful of Apple at all, as this is a much trickier setup..
I have just posted details in another thread. Longish post I am not sure how to reference a particular post.
https://discussions.apple.com/thread/3528704?tstart=0
Please follow those instructions to load 5.6 airport utility.. as you will find it much better.
In your case you will need to do the same thing but on the airport setup.. which is another layer in to ethernet.
But the idea is the same.. do not use automatic setup of the wireless IP settings.. you need to do it manually but it is relatively easy. Again you need to make sure your ISP is not using a 10.x.x.x address as many do.. the cheap skates are saving IP addresses. If they do that you will need to use manual setup of the TC as well.
You will still want to do the setup of the TC by ethernet.. but can use wireless once it is done.
Exactly as in the other thread, go to airport in network preference and go to the airport setup, then fix the IP address as I have shown.
If you need more info try to ask specific questions .. screenshots also help.

Airport Utility can't "see" base stations after Leopard 10.5.4

After upgrading to Leopard 10.5.4, Airport Utility can't "see" Airport Extreme UFO version and Airport Expresses. But the Expresses are glowing green, so I assume they're working. But if they can't be "seen" when scanned by Airport Utility, they can't be added as speaker options to iTunes.
Have unplugged and re-plugged in power to Airport Extreme and Expresses.
Oddly enough, at one point the sound through my eXpresses would kick in for five seconds and then disconnect for a minute, then play for five, then disconnect for a minute.
This same thing happened when I switched to Leopard.
Any solutions?

Well what do you know...after a week, it just magically decides to work, without even using Airport Utility.
Boy are these Airports touchy....and unreliable.
I still want to know: What makes these things drop in and out???

AirPort Utility does not see AirPort Extreme Base in G5 but see it in PB G4

Moreover I cannot lease an IP from AirPort Extreme Base with my G5, I must use manual IP set in order to connect. Every things works fine with the PB G4 which had an import setting from the G5 before the trouble began.

Sorry I had so many change in Hardware I have an AirPort Extreme Base and AirPort Utility works fine with the PowerBook G4. When you open Network Preferences and click advanced you will see TCP/IP
if you open it you see configure IPv4 you should Using DHCP.

AirPort Utility does not see AirPort in G5 but see it in PB G4

Ich cannot lease a IP from AirPort Snow with my G5. Manual setting with IP works good but DHCG gives me a 169.13. IP
everything works good with my PB G4 with a setting importiert from G5 before this trouble appears

Sorry I had so many change in Hardware I have an AirPort Extreme Base and AirPort Utility works fine with the PowerBook G4. When you open Network Preferences and click advanced you will see TCP/IP
if you open it you see configure IPv4 you should Using DHCP.

Airport Utility does not see Base Station but I'm still online

Similar Messages

Maybe you are looking for