Airport utility doesn't see airport extreme

i bought an Airport Extreme to replace a Linksys router that works but with a weak range.
I disconnected my Linksys router and plugged the cables into the Airport Extreme as per the instructions (btw, i don’t know why Apple has to use the silly little icons instead of labeling the WAN connection ‘Internet,’ but whatever.) I plugged in the power. The Link light for the connection came on.
The Airport Extreme status light glowed amber.
I ran the Airport utility on an iPad. It says it doesn’t see any Airport Extreme.
The Airport Extreme started flashing amber.
I read the troubleshooting instructions. I powered down the cable modem. I pushed the reset button on the Airport Extreme. I unplugged everything, plugged it in again. I tried the Airport utility on an iPhone. It said it didn't see any Airport Extreme. I checked the Airport utility on the iPad. Still didn't see anything.
I plugged my Linksys router back in and everything works.
Huh?

Power off the cable modem for 5-10 minutes to allow it to reset. It will not recognize the AirPort until it resets correctly.
Connect the Ethernet cable from the cable modem to the WAN "O" port on the AirPort
Please go back to the home screen on the iPad
Tap Settings (gear icon)
Tap WiFi
Just under the heading of Setup a New AirPort Base Station, a listing of AirPort Extreme should appear.
Does it? If yes,
Tap on AirPort Extreme to start the setup "wizard" and follow the prompts.

Similar Messages

Airport Utility doesn't see functioning Airport Extreme Base Station

I have an Extreme (n) Base Station which serves as a WDS main with one relay Express and one remote Express. All three are functioning properly. Now I want to add a second remote Express paired with the main Extreme. However, Airport Utility doesn't see the Extreme, even when hardwired. So I have no way to add in the Apple ID of the new remote.
Any suggestions on how to resolve this? Is it necessary to restore default settings on the Extreme and reconfigure EVERYTHING?
Thanks.

Not yet. Hoping there is some other approach, since if I reset it and then it loses the connection before configuration is complete, I lose the functions that are working now.

Airport Admin Utility Doesn't See Basestation But Setup Asst. Does

G4 won't connect to established Airport network that my MacBook Pro and PC do connect to. Admin Utility doesn't see basestation even though it is listed under the Airport icon at the top of the screen. Using Setup Assistant it sees the network, but when I enter the correct password it gets an error.
This system has worked perfectly in the past.
I suspect the transmitter in the G4 Airport card has dropped dead. Any other ideas will be appreciated.
Thanks in advance!

The configuration for the Extreme base station asks if you want 802.11g or 802.11 b&g. I had checked .11g only forgetting that my G4 Airport card was .11b.
Pilot error.

My Airport Utility doesn't see my Airport Express??

My Airport Utility doesn't see my Airport Express. . .so I cannot run iTunes. . it used to work fine. .

Version of utility, and express? Makes a huge difference.

Macbook Pro: Disk Utility doesn't see my HD

Hi guys,
My Macbook Pro has been running slower lately, but I honestly didn't think too much about it...until today. It's just over a year old, running Mac OS X, and I mostly use Safari as my browser, but I have to use Firefox for my online classes. Today, Firefox froze up and quit responding, so I Force Quit it. A few minutes after this, Safari did the same thing, and then it was my entire desktop. Nothing was responding; I had to shut down by pushing the power button.
And then, it wouldn't turn back on. The chime sounded, the apple appeared, and the spinning circle underneath it. And it spun, and spun...until a generic "stop" symbol replaced the apple logo. I immediately shut it back down and did an online search. I followed every fix recommended for this issue. I tried reseting the PRAM, and then the SMC, and still the same thing happened. I tried to boot in Safe Mode, and if seemed to be working...right up until an hour passed and nothing new was happening. I shut it down again, and tried booting from the install disc of Snow Leopard. That worked, and I tried to do Disk Utility with the intention of following the online apple directive of running first aid on my HD. Except Disk Utility doesn't see my HD, only the boot disc and DVD drive. I'm guessing this is a bad sign. I tried calling Apple Care, but they are closed right now. I will call them in the morning, but in the meantime, I thought I'd see if anyone here had any advice I haven't already tried. Sadly, I haven't run Time Machine in...months. I'll end up losing a lot of stuff because I just didn't do that if my HD is toast.
Any suggestions?

Sure seems to be a failed(ing) hard drive. If you happen to get it into safe mode again, the ONLY thing you should immediately do is copy off your Home folder to an external USB disk, SD card, something. Then just get it to an Apple store for check.
Try to copy your files off first and don't try anything else to get at that disk until you copy your home folder. If the disk is failing and you're trying to do things to it you'll loose the chance to get that data.

Disc Utility doesn't see new hard drive

Hi Everyone.
I've just replaced my old 20gig IBM Travelstar 4200rpm with a new Seagate Momentus 7200.1 80gig hard drive. I used Carbon Copy to back a duplicate of the info on the Travelsdtar to an extrenal fireiwre drive. I can boot up from the fireiwre drive. When I go to format the new Seagate drive, disc utility doesn't see it. I even booted from a tiger install disc and tried it's disc utiltiy. Still couldn't see it. Before I go and reinsert the old Travelstar, maybe someone can tell me what I am doing wrong? thanks Andrew
PS. The Seagate had jumpers on it. The Travelstar didn't, so I took off the jumpers on the Seagate before I installed it..
Ti G4 Powerbook DVI Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz
Ti G4 Powerbook DVI and Intel Imac Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz

Hi Eww. You are exactly right. What was I thinking (not). I reopened the laptop and had a good poke around. The Seagate comes with a jumper diagram on the case. I was correct to assume that no jumpers means " master". Why I didn't see that last night only wine will know.
It's not safe to surmise, because one drive has no
jumpers in place or jumpers in a particular
arrangement, that any other drive with which you
replace it should be jumpered the same way. Jumper
configurations may vary considerably from one drive
model and manufacturer to another.
If you find that the drive is already correctly
jumpered (with no jumpers in place), then the problem
may be a poor connection .
Yes that was it. In my haste to get the thing going I only connected one row of the pins. Problem solved. It's purring along as I type. For the record it is much quieter than the Travelstar. Thanks for everybody's replies.
Ti G4 Powerbook DVI Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz
Ti G4 Powerbook DVI and Intel Imac Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz

Ipad 4, 3 feet from my Airport Extreme. Airport Utility doesn't see anything, yet I am connected to the internet. What is the problem?

I am not pleased with the wireless connection in my house, as wireless access points of my neighbors is stronger than my Airport Extreme. It is physically the closest access point for my Ipad, my wife's Ipad and my Macbook Pro. I wanted to check the channel setting by using Airport Utility, and even though there is confirmation of internet access (posting this from my Ipad), it cannot find any Airport base station. Anyone have any idea why? Any help would be appreciated.

Apparently the problem is with the app on my Ipad. Airport Utility on my Macbook found both the Extreme and Express. Appears an app update is in order.

Airport Disk Utility Doesn't See External Drive, But Airport Utility Does?

Hey! I am a recent Apple convert and just got a brand new MacBook and Airport Extreme. I am trying to get my Maxtor OneTouch 320GB HDD to work with the Extreme, but to no avail. The Airport Utility sees my HDD, but the Airport Disk Utility doesn't? Any hints/tips on how to fix this problem? Any help is appreciated! Thanks!

All I can think of is that the drive is formatted in NTFS which I have heard cannot be read by the AEBS(Airport Extreme Base Station), but I am confirming this right now in a different message. If you can copy the files, format your drive in HFS+(the Mac's standard file system), then reload the files. See if it works and reply back.

Airport Utility doesn't "see" my base station now

I've got an HP Pavilion running Vista. Have an Airport Extreme base station which was working fine with it, both Internet and Bonjour, until I had a problem last week and had to do a factory install from a disc.
I had a backup, and restored using that, but now Airport doesn't recognize the base station any more. I plugged my Internet in using an ethernet cable and downloaded the very latest Airport software. I tried turning off both Windows firewall and Norton firewall. No help.
I poked around Airport Utility, tried to open the baseconfig file. It asks me what folder it's in. I've done a Windows "Search" and there is no such file on the computer.
This base station continues to work fine with the Intel iMac a few feet away. My Pavilion just seems to be missing something after the restore. Thanks for any suggestions.

Any thought on what settings I need to change on the PC to get it to see the base station?
Often, this issue is caused by either the Windows Firewall blocking the attempted connection, or by the anti-virus software doing the same thing...or, it can be a combination of both things.
Check the settings on both applications to look for "blocked" connections and change the status to "allow" the connection.
No guarantees, but this will solve the issue perhaps 60-70% of the time.

Installed the latest update, now Airport Utility doesn't see Airport

I ran the latest update, now my Airport Utility claims to not see my Airport Extreme although I'm still on my network.? Any suggestions before I completely reset the AE to factory settings and start over.

I purchased a new Airport Extreme last week, I run a home network with a G5 desktop and a G4 Laptop running 10.4.10. It took me a while to set it up as I entered the wrong password for my ISP SBCGlobal. After I finally had it going I had a couple of occasions where Airport Utility did not see Airport but I still had the solid green light on Airport. I am not sure what I did that resolved the problem but I know I did a restart one time and my Airport showed up. I may have also reset my base station and re-entered my info but I no longer have the problem.

Airport Utility doesn't "see" TC

I had a perfectly working TC and now all of a sudden it is no longer visible in my Airport Utility.
I have cable internet connected to a Airport Extreme which is my base station. I'm trying to have my TC join the Wireless Network created by my AP Extreme, but if I can't see it I can't configure it ... Anyone???
Have a MacBook Pro (OS 10.5.8) and iMac of two weeks old with Snow Lepard.
Looking forward to your tips!!
Cheers,
Dr Who (should be Dr How!)

Hello there,
I initially also reset my Time Capsule; both a soft and hard reset. What's the difference? Read [here|http://support.apple.com/kb/ht3728|Resetting an AirPort Base Station or Time Capsule FAQ]. However, it did not work thereafter.
In the case that resetting does not work, you can try what I did to get things working again.
1. Switch off and unplug Time Capsule and modem. Leave as is.
2. Open Disk Utility. Repair "Disk Permissions", and maybe verify the disk if your Mac has been acting up. During the permissions repair, I noticed a lot of Airport Utility components were listed.
3. Shut down the Mac. Unplug it. If it's a portable, remove the battery as well. Leave as is for 30 minutes.
4. After 25 minutes, plug in and connect both your modem and Time Capsule. Power up your modem.
5. Start up your Mac after the half-hour wait.
6. Upon login, Airport Utility detects the Time Capsule, Time Machine detects the disk again and I can set up the wireless network.
If these steps don't work, then I would suppose something is wrong with your Time Capsule hardware wise, so bring it in for repair.
Hope this helps.

Airport utility doesn't see airport

My Airport Extreme has been working perfectly for several years, including printing through it. Suddenly, when trying to print from either of the 2 computers on our wireless network, the printer cannot be found. Further, Airport Utility does not see Airport, and yet we can still access the Internet through our network (i.e., no device is showing in the left pane, and there is a message that there are no wireless devices seen). The printer prints fine when directly connected to each of our computers, so the problem is apparently not with it. Any suggestions??

Temporarily connect via Ethernet to the AirPort Extreme base station (AEBS) and configure the AEBS to use a channel between 1 and 11.

Airport Utility doesn't see Airport Exteme (White space ship, NOT THE BLOCK

Seems to be a 10.5 issue, my 10.4.11 machine and Airport Admin utility works fine BUT, my Leopard machines are online just fine and the Admin Utility or the Utility do not see the AEB--AGAIN, THIS IS A 802.11G WHITE SPACE STATION SHAPED AEB, NOT THE NEW BLOCK OF WOOD SHAPED AEB I've already read about the apple fix for reseting AND IT DOES WORK for this model.
Any thoughts out there?
G

Mark, I'm sorry to seem obtuse, but I remain confused. Since no one else is jumping in to help you, please help me understand.
The link you referenced doesn't seem to have anything to do with the 802.11n AEBS. That unit has its own forum and this isn't it. Apple hasn't made things easier by giving two different Airport units the same name, but since yours is not an 801.11n AEBS, don't get sidetracked by it.
The Apple procedure for resetting the AEBS that you have is detailed here. You said it works for your model AEBS which it certainly should. How were you able to determine this?
Next, if you're getting online with all your computers, and the issue is just that your Leopard clients can't see the AEBS in Airport Utility, I'd begin to suspect something is wrong with a Preference file related to Airport Utility. I don't have Leopard, but there must be a file that corresponds to something like the following:
~Library/Preferences/com.apple.airport.airportutility.plist
Try dragging it to the Desktop, log out, log in again, and see if that changes anything. If it doesn't, try the same technique with the following Preferences file:
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
You'll have to recreate your System Preferences > Network settings after this one.
If it mucks up things even worse, you can always drag those files back and undo those steps, but I think a Preferences file somewhere is to blame.

AirPort Management Utility doesn't support "n" Extremes?

Whenever I try to add a new Apple AirPort to the AirPort Management Utility (not the AirPort Utility for configuration) the application quits. I use it to manage losts of AirPorts and need this to work.
Any idea if there will be an update to this software to support the new AirPorts?
AirPort Extreme

As previous poster correctly stated, you must use the new Airport Utility which is (currently at least) available only on the CD that came with your AEBS(n). Note that there is an update to this software available after you have installed Airport Utility. You CANNOT install the update without first having installed the initial version of Airport Utility.
I doubt Airport Admin Utility will ever be updated; it will be replaced by Airport Utility at some time. Airport Utility works with all the older ABS antecedents and Airport Express as well as the newer AEBS(n).

Airport Utility doesn't see either AXpress.

Tried to add a newer AX (A321-n type). Utility does not see either.
1084 worked well before. Need to start from scratch.
Set up 321 with ethernet cable but when cable was disconnected Utility does not see 321.

You should reset the AirPort Express (AX) back to factory default settings as follows:
Power down the AX
Hold in the reset button and while you continue to hold it in, plug the AX back in to power
Keep holding the reset button until the amber light blinks quickly
Hold another second or two and then release the reset button
It will usually help AirPort Utility to "see" the AX if you temporarily connect an ethernet cable from your computer to the AX. When you have it configured and updated, you can disconnect the ethernet cable.

Airport utility doesn't see airport extreme

Similar Messages

Maybe you are looking for