Airport Utility for Airport Snow

After switching to Snow Leopard OS (10.6.2), I lost the capacity to configure my old Airport Snow base station. "Airport Utility 5.4.2" doesn't discover my base station and "Airport Admin Utility for Graphite and Snow 4.2.5" doesn't run in Snow Leopard OS. BTW I'll like to keep this old base station working because its "dial-up" functionality, something I need in a remote farm with no DSL or cable services. Is it a way to configure an Airport Graphite or Snow using Snow Leopard?

HI,
Try posting in the Airport forum here.
http://discussions.apple.com/category.jspa?categoryID=140
Probably an Airport guru there that can help.
Carolyn

Similar Messages

I just got a new Windows computer and need the download the airport utility for base station model A1408. Where do I find the download?

I just got a new Windows 7 computer and need the download the airport utility for airport extreme base station model A1408. Which download is it and where do I find it?

If you Google AirPort Utility for Windows 7......this is the first item that comes up:
AirPort Utility 5.6.1 for Windows - Apple

Since I upgraded to Lion 10.7.2, my external HD is no longer visible in AirPort utility (in the AirPort disks tab). I also installed the AirPort utility for iOS5, it reported a disk problem, but running Disk Utility on the Mac showed no issues. Help!

To expand on the question, I have performed the following steps:
1 - Unplugged external drive (1TB WD MyBook) from the Time Capsule
2 - Reconnected it. At this point, AirPort utility for iOS5 reported a problem with the disk (Time Capsule light was blinking Orange)
3 - Unplugged external drive, connected it to MacBook Pro, ran Disk Utility. It found no problems (disk visible straight away on the MacBook Pro).
4 - Reconnected to Time Capsule - still doesn't show up under the "Disks" option under Air Port utility. Or rather, the hardware is visible (i.e the physical disk) but not the volume.
5 - I tried another external hard drive, and the volume also doesn't appear in the Disk section under the AirPort utility.
The WD disk is formatted as Mac OS Extended (Journaled).
This is a big problem for me, as the drive houses my iTunes library.
Anyone else had a similar problem? It all worked flawlessly until last week.

I love computers.
Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
So - thought I would post my resolution in case it helps others.

Airport utility for iPhone question...

Hi,
The airport utility for my iPhone does not show the client list, the utility on the iPad does show the
Client list... Am I holding it wrong?
Jerry

Access to the DHCP or Wireless client lists do not seem to be an available options with the iPhone/iPod Touch version of the AirPort Utility.

Error when opening Airport Utility for Windows XP

Help! I have recently purchased and Airport extreme base station and the supplied Airport Utility software will not open. I am operating on Windows XP pro, and have installed the latest software updates to no avail. Is there an older version or perhaps an oblique solution to run the utility software?
Thanks.

Hello jleo325. Welcome to the Apple Discussions!
Here are the links for the last two versions of the AirPort Utility for Windows:
o AirPort Utility Setup 5.3.2 for Windows
o AirPort Utility 5.3.1 for Windows

Airport Utility for OSX 10.10.2?

Hello.
I have Airport Utility for Windows...
I have a Mac Book Pro and would rather use Airport Utility here. I downloaded AU latest version and it says it's not compatible with my OS version.
Is there a proper version for Yosemite, or do I need to use a Windows machine to manage my Apple hardware?
Help!
R

You already have the most up to date version of AirPort Utility installed on your Mac using Yosemite (10.10.2)
Open Finder > Applications > Utilities > AirPort Utility

Need airport utility for pc

bought airport extreme. told to plug in modem and it would work....do i need airport utility for pc

The link that Nachos Libres provided will only work if you have Windows 7 on your PC.
If you are running XP as your profile indicates....and it must be XP SP3.....you need to download and install AirPort Utility 5.5.3 for Windows

Airport Utility for Windows fails during install

I downloaded the latest driver for the airport utility for Windows 7. Ran the exec and during the install had a failure on some file that didn't get installed.
Have all firewalls down. Utility comes up but doesn't find my airport extreme.

Thanks. Tried the hard wire approach and the utility didn't find it. Did the config other and it was found. So the unit is there but the utility can find it which is what I need in order to connect the shared drive to my windows 7 system.
The airport base station agent is running and configured but I never get a prompt to enter the disk password.
Nice clue about using the IP to connect.
I did this via WIFI. Used my iMac to get the IP address.
The time machine is in bridge mode and connecting through another router to the internet.

IMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
Or invite a friend with a laptop running at least Lion
Or take the TC back and get a plain USB hard drive and backup to that.

I can't find an airport utility for windows 8 or 8.1 to download.

I have a desktop computer with windows 8.1 and an Airport Extreme base station. I need to install the Airport utility to set up the Airport Extreme base station and I can't find at apple support an Airport utility for my operating system to download..

If you have an iPhone or iPad handy, the setup is much easier on those devices than it is compared to a PC.
If you have an iOS device, download and install AirPort Utility on the App Store on iTunes - Apple

Airport Express Install help needed as Airport utility for PC seems to sort of work?

Hope someone can help.
Just bought the Airport Extreme 802.11n Wi-Fi
It is connected to my cable modem, and i have my ps3 hard wired to it.
It is on and sending a signal because this computer is using the internet connect on it right now.
Problem is it is still unsecured as the Airport Utility can find it but then when I click continue to set-it up it gives me the following message.
An error occured while trying to access the apple wireless device. Make sure your network connection is valid and try again.
Error 10057.
Any help would be great. I'm on a PC running Windows 7.

Thanks for the reply.
All we have is the cable internet modem....it provides our phone and internet signals....tons of lights on it the front that are solid green or flashing green when in use.
I have connected a cable from the modem to the airport express (WAN spot). Plugged in the device (power) and then downloaded Airport Utility for windows from apples website (no disk came in the box).
I have have two wired connections running to the extreme as well, one is to my PS3 downstairs and the other I use when I'm at my desk with my office laptop. These shouldn't be affecting anything and I can get internet on my PS3 wired connecton so I know the router is functioning.
I installed Airport Utility and have rebooted my PC running windows 7, I click and opne the Utility. It finds the base station but when I click on the options to continue or manual I get the error message noted in my first post. I have alos noted that the router goes green light to yellow to flashing yellow. It does nothing but flash amber right now.
Hope this helps for solutions?

Airport Utility for iOS on iPad

Although my Airport Extreme and two bridged AP Expresses are oerating properly, Airport Utility for iOS on any network connected iPads cannot locate any of the Airport devices. The same version of Airport Utility works properly on any iPhones on the network and the Mac version also works.
I've tried removing, downloading, and re-installing the utility from the iTunes App Store, but the iPads still cannot locate any of the three devices. All it can find is "Internet". I've tried on iPad 2, iPad Mini, iPad Mini 3 and none of them can see the Airport devices. On the other hand, I've tried the utility on iPhone 4s, iPhone 5, iPhone 5s, and iPhone 6 (all iOS devices running iOS 8.2), and the iPhones can all see the Airport devices
The symptoms are pretty consistent and reproducible. In the past 4 to 6 months, Airport Utiity did work properly on iPad. I'm not certain which version of the app and iOS were current when it worked, because I don't frequently use the app, unless I have network revisions done on my Mac and need to check results later. Tonight, I did use it because I have a malfunctioning IP camera. I scanned the network with a third party network scanner/sniffer on iPad and it confirms that the network is intact.
Basically, it's not iPad specifically, but it appears to be the Airport Utility running on iPad only, that has a problem locating the Airport devices. It seems to be a bug in the Airport Utility for iOS, as used with iPad. Has anyone else observed this?

I have never seen it either.. I have no problem with the ipad to discover any airports in my network.. and there are loads of them.. nor seen people reporting it as an issue.. but you have sure got something interesting happening.. what version Extreme is it?? Do you have something unusual in the setup?
If you are really brave or foolhardy.. save the existing setup.. and reset the main extreme to factory and redo the setup from the ipad.. I am pretty sure it will work as long as it gets first bite at the apple. (no pun intended).
Keep all names short, no spaces and pure alphanumerics.. same for passwords but can be longer.. ie names <10 is good.. passwords 8-20 characters. Mixed case and numbers.
I do notice that Airport Utility in ipad does behave differently (only slightly but it is there) cf the iphone. Some functions are missing in the phone version.. so I guess with the bigger screen the utility adjusts to how it works.

How can I download airport utility for my windows computer?

I have been unable to find the airport utility to download it. I can not, for some reason, get the download window to load. It just sits there with a spinning wheel in the center of the screen. Where can I find the airport utility for the new airport extreme?
Thank you for your help.

The most recent version of AirPort Utility is AirPort Utility 5.5.3 for Windows
If you are having trouble downloading this, Apple has just introduced a number of new Mac updates, so it is possible that the servers may be temporarily overloaded.

Printer Doesn't Appear in Airport Utility for Time Capsule Setup

Hello group.
I've been researching solutions, applying them and contacting Apple for help and so far - I'm still in a pickle.
Here's the skinny:
1) Have AT&T Uverse with AT&T wireless modem. This runs cable/TV, phone, fax and Internet.
2) Setup MacBook Pro, Snow Leopard 10.6 and Airport Utility 5.4.2.
3) Purchased a Time Capsule (1TB).
4) Printer is a HP Officejet 6210 All-in-One.
I would like to use the TC's wireless printing capabilities. However, when I access Airport Utility, it doesn't recognize or acknowledge the HP printer connected to the TC. It simply states: NONE.
What are some of the things that I've done to try and remedy:
1) Uninstalled and reinstalled HP's current driver and software from their website.
2) Removed and added back the HP printer through the 'Printers & Faxes' pane.
3) Powered down the HP and the TC, disconnected all plugs and powered back up multiple times.
4) Restarted the MacBook several times.
5) Spoke with HP Mac Support and received confirmation that printing should work with TC and HP 6200.
6) Spoke with Apple and they are perplexed.
7) Performed both 'soft' and 'hard' resets of the TC - still nothing.
8) Read and followed the steps in this article: http://support.apple.com/kb/TS125 (nothing worked)
9) Plugged the HP directly to the MacBook and it prints perfectly.
10) Tested the TC USB port with a flash drive and it recognizes (via AU) and works without error.
I'm at a total loss. Perhaps I have the wiring and setup options chosen incorrectly? Would love any help that can be provided.
Worth mentioning - prior to the TC, I had purchased and Airport and was able to print wirelessly without a hitch. The Airport was exchanged for the TC (needed backup capabilities) and now I'm in the lurch.
Thanks to all for any assistance that can be given.

Welcome to the discussions, MindSprout!
I'm following your post with interest because I have an HP 6210 as well with a 1TB Time Capsule. No issues at all since it was installed over a year ago. I'm not using Snow Leopard (yet), so can't offer any comments as to whether that might be one of the possible issues here, but that was my first thought.
If I get SL installed this weekend, I will post back with results.
The other thought that comes to mind is that there may be a problem with the printing instructions passing through the USB port on your TC. I can't answer why a hard drive functions perfectly, though.

Airport Utility for my Airport Extreme needs to be changed to a different computer, because the current computer is down permanently.. How do I do this? Do I have to reset the Airport Extreme and start from scratch?

The computer (Win XP) on which the Airport Utility has been set up for the past few years is no longer accessible, so I need to set it up on a different computer. Can I do that with my exisitng wireless network, or will I have to set up a new network from scratch, once I have installed Airport Utility on the new machine?

You can install AirPort Utility on either a Mac or PC, but there would be no reason to make any changes to your existing configuration on the AirPort Extreme unless you need to do so.
Download files are here:
http://support.apple.com/downloads/#airport

Airport Utility for Airport Snow

Similar Messages

Maybe you are looking for