AirPort Utility is unable to fine any Apple wireless devices.

Just installed Airport Extreme. Went beautifully:
- iMac (OSX 10.5) can connect wirelessly to Internet,
- IBM ThinkPad (XP, SP-2) can connect wirelessly to Internet,
- iMac can print to printer connected to the USB port of the AE
But if I try to administer the AE from IBM ThinkPad rather than from he iMac, though, and the AirPort Utility simply responds that "AirPort Utility is unable to find any Apple wireless devices [RESCAN]. Even though it is currently connected to the Internet using one .
Do I have to join a network or otherwise tell he Windows machine about the AE somehow for it to "see" it? I don't know where to turn.
Apple's doc on this subject is typically nonexistent.
Any help is GREATLY appreciated.

I do not believe that I solve this easily. I have restarted everything, connected directly wtih CAT6, patched my XP, reset the AE, etc. The ThinkPad is a work computer, and I believe that my issue is most likely related to some level of super-firewall-encryption-keep-me-same-from-everything kind of stuff that has been installed by my company, stuff which I am not going to try to find, remove, or shut off just so I can configure the AE from here.
I have an old XP desktop connected to the AE through CAT6 that is able to read and manage the AE's configuration, and of course my iMac sees it perfectly. That will be good enough for now.
Thanks to all who suggested solutions.
KAS

Similar Messages

AirPort Utility was unable to find your Apple wireless device after restart

I keep getting this message when I try to setup my time capsule.
"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
After this message, the time capsule cannot be seen in the airport utilities at all either, and requires a reset before it becomes visible again. I've tried renaming the network and the time capsule itself to shorter names without punctuation as I'd read sometimes helps, but it doesn't seem to work. I don't have an internet connection set up yet, but that shouldn't be a problem, as I've selected not to connect to the internet for now, and am just wanting to back up my computer for the moment. What is happening here?

probablythestrongest wrote:
I keep getting this message when I try to setup my time capsule.
"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
After this message, the time capsule cannot be seen in the airport utilities at all either, and requires a reset before it becomes visible again.
Until you can complete the Time Capsule configuration process, I recommend that you connect it to your Mac with an Ethernet cable instead of depending on a Wi-Fi connection. That would make a lot of sense given the rest of your situation, as it would make your backup process a lot faster.

Airport Extreme Seems Unable to Find Non-Apple Wireless Devices-True?

My Airport Extreme does not seem able to find devices other than other Apple devices, eg, Airport Express. Is this a limitation of the Apple? Can't be, right?

rockitdoc wrote:
I downloaded iStumbler, but can't figure out what it does. It looks like it shows me all the networks within range, including mine, but not wireless clients. Is there any literature explaining what this app does?
sorry, i re-read your initial post and i might have been on the wrong track. iStumbler does just that: it scans for networks near you and thus helps you troubleshoot your network in case you get interference.
back to your your problem. i expect the BD player is a blue ray player so see if this thread http://discussions.apple.com/thread.jspa?messageID=10649941&#10649941 provides any pointers.
good luck !

AirPort Utility unable to find any Apple Express devices.

Help! This is getting desperate. I bought an AEX for streaming music to my hifi. Installed it yesterday and it worked on both my desktop (running Vista) and my laptop (running XP). However I was experiencing sound dropouts on the Vista machine so, having researched on this forum, I tried to change a couple of settings in my wireless router (D Link DI524) to try and cure the problem.
My wireless network is still working fine but since making the changes the AirPort Utility software just keeps telling me that it is unable to find any Apple Express devices and I cannot make a connection. It is the same on both my desktop and my laptop.
I can't see why changing security settings in the router should prevent the Utility from connecting with the device as it has to do this during set up anyway to be incorporated into the network. I have tried a full re-set to factory settings but that didn't work. Any ideas? Otherwise this thing is going back to the store.

It's ok. It seems to have cured itself. And downloading Vista Anti Lag has cured the sound drop outs too.

HT3728 AIRPORT UTILITY IS UNABLE TO FIND ANY WIRELESS DEVICE 5.6.1

Ok So I have bought a 2TB Time Capsule, for the past few weeks we have been doing our backups on it etc and just using our already installed Netgear wireless router. Tonight I decided I would "extend an already existing wireless router" - after following all the steps etc and then clicking apply etc, the Airport Utility said that it would need to restart the time capsule etc. After about 5 mins and it looked like it had frozen, airport utility re-started and now all i get is:
"Airport Utility is Unable to find any wireless device. Make Sure the Airport Wireless Device you want to set up is plugged in and in range of your computer, and then click rescan"
I have clicked Rescan like 10 times
I have quit and restarted Airport Utility as well as my Mac OSX 10.5.8
I have pulled the Time Capsule plug out of it and restarted it
I have turned of my airport on my computer and turned it back on again
I have read a number of posts - yet nothing seems to give me any more options other than to rescan.

If you are trying to connect the Time Capsule to the Netgear router using a wireless only connection, Apple's "extend a wireless network" feature was designed to only work with other Apple routers. It is extremely unlikely that this setting would work with a Netgear product.
You will need to start over again and perform a Factor Default Reset on the Time Capsule and then re-configure it back to the original settings that you set up previously.
Resetting an AirPort Base Station or Time Capsule FAQ

Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglenn

When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

On Windows XP: AirPort Utility was unable to find any base stations

hi, I've been using AirPort Extreme for at least a year to connect both my eMac and my Lenovo Thinkpad which uses Windows XP. yesterday my Thinkpad was infected with a virus and I went through a lengthy remote session with Norton Antivirus tech people to get rid of it today. Sometime in the middle of the session the Thinkpad stopped being able to connect to the AE wireless network. I got back on the internet by plugging the Thinkpad directly into the router.
Now on the AE utility it says "unable to find any base stations." so far I tried uninstalling and reinstalling the AE utility and unplugging and restarting the AE base station. On my eMac everything seems to be fine.
Please help!

Thanks for your instructions. Basically the same results happened. Is there something else I should be doing on the PC notebook end to connect? The AirPort Utility on my PC still doesn't see any base stations. So using the Access Connections setup the only way I could see to connect with a password was what I described in the previous post. Access Connections sees my network, but fails to connect to it.
Just to be clear, there hasn't been any problem with my notebook seeing the network. For a long time until recently it was seen by the AirPort Utility on the PC. When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - that seems to be the right one, so I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password (see previous post).

Airport utility was unable to find any airport wireless device

Installed Airport Extreme connected to my PC running XP Pro. Configured my wireless network successfully. Updated to Aiport Utility for Windows ver 5.5.2 and the Airport Utility shows the 'unable to find an Airport wireless device' message and the 'Rescan' button. I uninstalled the upgraded Utility software, unplugged the Airport Extreme, installed the original software from the supplied disc, held down the reset button while plugging the power back in and waited till I got the amber/green fast flashing lights at which time I released the reset button. No change. Then upgraded the Airport Utility back to 5.5.2 and still no change. I can connect to the web from my PC and to an open wireless network named Apple Network f9561d.
Any help getting access to my Airport Extreme greatly appreciated. Thx

PC was/is always directly connected to Airport Extreme via ethernet. Windows XP Pro firewall always has been disabled (double checked). No firewall software. Disabled PC Tools malware protector. No virus protection or scanning software.
Only things showing in toolbar are NVidia Settings, Windows Volume Control, Network Connection icon,Safely Remove Hardware Icon and the time.
Don't have anything running that would block any ports.
Airport Utility for Windows is version 5.5.2.
Did another factory(?) reset as described before and pressed 'Rescan' button 15 times with no change. Devices connected via wireless are Nexus smartphone & HP laptop running Vista. All can access Internet, but slowly.
Tried rebooting PC several times with no difference. Tried plugging the PC ethernet cable into different ports in the Airport Extreme before I realized that I could always access the Internet from the PC so I was wasting my time : )
Tonite I unhooked my DLink wireless router, hooked up the Airport Extreme, installed the software, configured the network (perfectly) and then checked for and installed the
Airport Utility software upgrade (no others). As soon as it finished installing, I ran it and ended up with the error. I didn't install anything else or even run any other software. I saved the configuration, checked for and installed the upgrade. I haven't changed ANY settings on the PC or run any software other than Firefox to create my Apple account to report this problem.
Any help greatly appreciated.

AirPort Utility was unable to find any AirPort base stations...

I recently purchased a new AirPort Extreme base station 802.11n, and I followed the manual to get it set up. I installed the software, but when I launch AirPort Utility it cannot detect my base station. (I get the above error message).
I've got an old G4 desktop mac (QuickSilver model) running OSX 10.4.10, and it's got the original AirPort card installed. I've made sure AirPort it turned on in my menu bar.
I decided to set up my base station by connecting an Ethernet cable directly from my base station into my Mac, and set up my network that way. But as soon as I try it wireless, then AirPort utility looses the base station.
My base station is connected to a Netgear ADSL2+ Modem Router DG834. (The router and my internet connection are working fine). I've got all solid green lights on the router and the base station.
Is there some compatibility issue with my old AirPort card and my new base station? Or do I have a faulty card maybe?
Any advice appreciated.
Thanks, Tom.

I have the same setup as you and I had problems like yours. For some reason the old airport card doesn't seem to work with the new airport extreme base station if you are using WEP encryption. WPA works fine. In order to connect to your new base station so that you can administer it with the new Airport utility try this first: If the airport icon is displayed on your tool bar, click on it and select other. Enter your network name and password. With a little luck you will now be connected to your base station and it will be found by airport utility. If that doesn't work. Press the rest button on the back of the base station and hold it for at least one minute. That should completely rest your base station so that it is not encrypted. You should then be able to select it from the drop down menu when you click on the airport icon on the tool bar. Once you are connected, airport utility will find it.

When trying to set up my time machine I get this message: Airport Utility was unable to find any airport wireless devices. I am connected to the internet. What's the problem?

I'm trying to set up my time capsule. I'm having trouble. Please help

Hi Angela,
Had (and having) the same issue from Windows 7 on my TimeCapsule (TC) ..... Not sure how to fix it but I have a workaround:
1) Make sure you are getting your internet connectivity from the TC instead of your ISP's modem (turn off wifi on the ISP's modem)
2) go to windows menu and type CMD on the search box, that should get you a black screen. Type IPCONFIG and note the numbers on the Gateway (mine is 192.168.1.1)
3) Open Airport utility and go to File > Configure other
4) Type the Gateway from step 2 and your TC password (if you didn't change it, it should be the serial number f your TC, found on the bottom sticker)
5) you should be able to see yout TC settings.
Hope it helps. I had a big headache when setting TC on my Windows laptop.... (but none on my Macbook) :-) Good luck!

All of sudden the airport utility on the iMac will not recognize wireless devices that have on network for ever

Airport Utility will not recognize any of the devices on the network - mix of Time Capsule, Airport Extreme, and Airport Express. The network works fine. If you use the Airport Utility on iphone you can see and configure all the devices. Any clues?

AirPort Utility version 6.0 is rather limited in its abilities. I suggest you download and install the more useful version 5.6 (for Lion): AirPort Utility 5.6
You can see both wired and wireless clients in Advanced > Logs and Statistics.
AirPort Utility 6.0 cannot be deleted but it will coexist with AirPort Utility 5.6.
Use 6.0 when you want pretty pictures. Use 5.6 when you actually want to do something.

Airport Utility can't find Time Capsule but wireless is fine

Hi
I have my Time Capsule connected via cable to my NetGear Modem/Router and have wireless enabled on the Time Capsule.
I never have any problems with the actual wireless connections to the internet via any of our Macs or PCs in the house, but on a fairly regular basis, the AirPort Utility comes up and tells me 'AirPort Utility was unable to find any apple wireless devices. Please make sure the Apple wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again.'
Wireless access continues to work just fine when this happens, but I just can't get to the Time Capsule with the Airport Utility. Un-plugging and re-plugging the Time Capsule makes it appear in the Airport Utility again, and it's fine usually for a few hours or most of the day, but then quite often I will open Airport Utility again later in the day and it again will not be able to find the Time Capsule again.
I have tried firmware 7.3.1 and 7.3 but it didn't make any difference.
So I wonder if anyone might have any suggestions as to why Airport Utility would not be able to find the Time Capsule yet the same Mac from which I am trying is quite happily connected wirelessly and surfing the web.
Thanks in anticipation!
Ken

Wow it took me awhile to find this thread.
1047 views. I guess I'm not alone.
Every few days my macbook pro quits recognizing the Time Capsule even
though it works fine for wireless internet.
Airport Utility doesn't see it either. Shared disk access, gone.
I found I can get things working again over wireless if I plug the computer
into the time capsule with a cable. When I plug it in the time capsule instantly
appears on the list of available backup devices in time machine settings.
If I do a backup and then disconnect the cable backup continues to work for
awhile. Then I need to connect again.
Pretty silly bug.
When it works time machine and time capsule are great. We've used it to
recover data very easily.
Wish the connection wasn't so flakey though.

Unable to find apple wireless device

H
My connection to the internet was created by a technician from the ISP company who came and fitted everything and for my iMac it appears fine, as I can connect to the internet with my iMac but I am not sure how.
When I try to connect other hardware to the network eg iPod touch and Macbook. When I run the airport utility I get the response that Airport utility was unable to find any Apple wireless device.
I know that it maybe something very easy to fix but does anybody have any ideas, I can't find any suggestion in the Airport extreme user guide.
Look forward to you comments and help.
Thanks

James, welcome to the discussions!
Try the following.
Power down your Extreme.
Temporarily, connect an ethernet cable from one of the LAN <-> ports on the Extreme directly to your computer.
Now open AirPort Utility again and your Extreme should be identified so you can set it up. Once you have it configured, you can disconnect the ethernet cable if your computer will be connecting wirelessly.
Post back on your progress.

Airport utility can't find Apple wireless devices including Time Machine

I have a comcast high speed internet modem that is working, connected by Ethernet to a Time Machine. The Time Machine was working fine until this morning when I tried to reconnect to the internet wirelessly on my PowerBook G4. The Time Machine network wanted a WPA password but wouldn't accept the current password. I then tried to set up Time Capsule in the Time Machine dialog box, but it invoked the airport utility which says it can't find any Apple wireless devices. My Time Machine is now blinking amber at me, and I have tried unplugging, resetting, etc. I am on the internet via hardwire Ethernet connect through the Time Machine to the modem, but cannot get Time Machine to show green and cannot see any wireless devices in airport utility. Any suggestions, please?

set the TC to N+B/G do that using airport Utility. once done power off modem and the router. power on modem first then the router.

Computers do not discover Apple Wireless device

I have tried to connect my TC via Ethernet both to a PC and a new iMac and when running the AirPort Utility, it says it cannot find any Apple wireless devices. I believe when trying different settings when it was working, I set it up as being connected via Ethernet to my network. Ever since, I cannot get the computers to find it. How can I reset it and start from scratch????

I have a similar problem. I am getting a strong signal from the Airport Extreme, but I have lost contact with the backup. Last night I reset the Time Capsule, and it worked. This morning I've lost it again.
Airport Utility won't let me manually try to reinstall, only seems to want to rescan....?

AirPort Utility is unable to fine any Apple wireless devices.

Similar Messages

Maybe you are looking for