Airport Utility Keeps Forgetting TC

Hi all,
My Airport Utility keeps forgetting the TC.
The only way to refresh the connection is to disconnect from Wifi, and then reconnect the Wifi. This in turn is affecting my TMs and is proving a nuisance. I suspect a Yosemite bug as it rarely happened on Mavericks.
The also happened when using Bridge Mode, and it happens likewise when turning off The TC Wifi and accessing it via my old router which is connected via ethernet to the TC.
Anyone else, seeing or experiencing this?
And following a quick disconnection of the Wifi...

Totally standard issue on Yosemite.. welcome to bug heaven.
There is not much you can do .. but go back to better more stable OS.. ie Mavericks.. or wait for apple to fix their latest greatest OS.

Similar Messages

  • Airport Utility keeps popping up

    On my laptop (wireless connection), the Airport Utility keeps popping up.
    Does anybody know why it does this or how to stop it?
    Thanks

    Hello!! I have an iMac 3.06 and i do not use wireless connectivity... i am plugged to a LAN, and a colleague in a nearby office has a time capsule (that i don't use, or access for that matter)... but a few days ago the airport utility on my iMac started popping up, asking to click on continue to "set up this wireless device" and there is a list of two time capsule devices... i recognize my colleague's name on one device (with a green marker) and there's another one with an alpha-numeric code with an orange marker. I do not wish, nor need to configure access to any of these devices but the airport utility keeps popping up... is there any reason for this to happen?
    I haven't modified my network preferences or connectivity configuration.
    Please help!

  • Airport Utility keeps loosing AE! Otherwise fine!!

    Hi all,
    A strange one in that Airport Utility often can't see my AEBS (and the AEX) and carries on like this unless I do a quick reboot (unplug it and back). Strangely my wireless connection to my iMac is not affected by this with uninterupted connection.
    The one area it does affect me is when I print as I have a USB printer attached to the Express. I have to reboot the AEBS each day I want to actually print something and it is getting annoying!
    I have even tried a hard reset but still the problem persists. Notice also from other posts that some think there are problems with WPA so may try a change in security to see if this does it but any other ideas out there?
    Thanks, Mike

    10.5.3 does not seem to have helped either - seems to be worse if anything as Airport Utility managed to see my AEBS sometimes with 10.5.2 but can't see it all all now!
    Off for a reboot....

  • HT2497 Why does my Airport Utility keep saying "Double NAT"error?

    I had to add a new cable modem to my home network.
    I keep getting a "Double NAT" error and my modem keeps the yellow light blinking.
    What do I do?

    It's almost a miracle that it was working at all.
    Each wall will absorb on average, about 15-20% of the signal so after 4 walls...and a ceiling....which is typically 2-3 time thicker than a wall....there isn't going to much signal left to extend.
    Try locating the Express no more than half the distance between the Time Capsule and the general area upstairs that needs more wireless coverage.  Minimize obstructions in the signal path as much as possible.
    If that does not help, we'll have to do some SNR measurements to see if what you are trying to do is even feasible.

  • Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

    How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

    How do I clean up my new FIOS connection?
    The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
    Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
    But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
    If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

  • A newer version of AirPort Utility is required

    Hi everyone,
    My Airport Utility keeps telling me that "A newer version of AirPort Utility is required."
    My airport extreme is a (new) dual band unit (running v7.5) and the AirPort utility (v5.4.2) seems to be the latest and greatest.
    What am I doing wrong?

    You need to install the new software from the disk that came with the Airport Extreme.
    This is only available on the disk at this time as Apple has not released the new version for download.
    The new version of Airport Utility is 5.5 which is on the disk that came with the new Airport Extreme.

  • Airport Extreme doesn't show up in Airport Utility.

    Just got a new Mac Mini and a new Airport Extreme. 
    When I tried to set up Airport Extreme today, ran into some problems.
    1)  Light is flashing amber
    2)  Airport Extreme does not show up in Airport Utility
    3)  I have DSL and ethernet cable is plugged into WAN port on Airport Extreme.
    4)  Both units are sitting side by side and yet there's no connection detected.
    5)  Airport Utility keeps telling me to rescan as it cannot detect any wireless devices.
    Any suggestions would be greatly appreciated!

    If you are trying to connect using wireless, make sure that you are connected to the default wireless network that the AirPort Extreme provides for setup purposes. The network that you are looking for will have a name like Apple Network xxxxxx. There is no security, so a password is not required. It usually also helps to restart both the computer and the AirPort Extreme.
    You can also temporarily connect an ethernet cable from your computer to one of the LAN <-> ports on the AirPort Extreme. Restart both the computer and the AirPort Extreme when you do this.

  • Airport utility accidentally selected forget this device, and want to recover

    I am running Mountain Lion and using the AirPort Utility 6.1 to manage a Time Capsule.  I accidentally selected "forget this device".  How can I recover from this?

    If the device is still hooked up to your network, power off all other devices on the network in any order that you wish.
    Wait a few minutes
    Start the modem first and let it run a minute by itself
    Start the main router next that is connected to the modem that same way
    Keep starting devices one at a time until everything is powered back up.
    Now check AirPort Utility to see if the device has reappeared.
    If the device does not appear, you will need to "start from scratch" by performing a Factory Default Reset and then reconfiguring it again.

  • Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network.  when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

    since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

    I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
    But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
    You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
    In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

  • I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

    I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
    How do I fix this

    If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
    Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

  • Can I use accounts in the Airport Utility to keep backup from multiple macs separate and separate?

    Can I use accounts in the Airport Utility to keep backup from multiple macs separate and separate?

    Backups from multiple Macs are always kept separate. Each Mac TM will create its own sparsebundle and will not interfere with others.
    Using the accounts in AU will simply make each sparsebundle only accessible to that user.. ie it is a purely a security measure.. that is so weak as to be useless .. anyone can bypass it by pressing the reset for 1sec.
    And what it will do is cut off everyone from their existing backups.. you will be warned when you set it up that what is about to happen may not be 100% goodness.. pay attention.. it is not.

  • Kids are using the WiFi all night long and not sleeping... How can I temporarily turn off the WiFi at night using the Airport Extream or Airport Utility?  I must keep the guest network up as I have a tenant in an apartment over my garage using that.

    My kids are up all night streaming Netflix and using the WiFi on their iPads and Apple TV. The next day they don't want to get up and go to school. Is there a way I can set up a separate access point for just the kids in AirPort Extreme and then turn that one off when i go to bed? Or somehow turn off the main network when I go to bed, without having to reconfigure the entire router the next day, and then simply turn it back on the next morning?  I have to keep the Guest Network up as I have a paying tenant living in an apartment over my garage that uses that network.
    In the event it's not possible with the AirPort Extreme, any other suggestions would be appreciated.
    Thanks in advance.

    You can configure the AirPort Extreme for Timed Access using the AirPort Utility. Basically what you are doing is restricting the time of a wireless device by its MAC address has access to the base station's wireless network.
    To access this feature: AirPort Utility > Select the Extreme > Edit > Network tab > Enable Access Control: Timed Access Control...

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

    Trying to set up my time capsule on my imac.
    Keep getting message "Airport utility was unable to find any airport wireless devices."
    What do I do now?
    joglenn

    When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
    Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
    Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
    Perform a "factory default" reset on the base station.
    Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

Maybe you are looking for