Airport utility "not supported on this architecture"

i have the original airport express, using macbook pro with 10.5.4. i've used the ax to extend the range of my current network, stream music, and share a printer. i moved and need to use airport utility to set up the network but it won't launch saying that the program is "not supported on this architecture". so... how am i supposed to configure the ax if the utility prog won't launch? i'm nor sure which firmware is on the ax, i presume the latest one.

wootang71, Welcome to the discussion area!
It sounds like you may have accidentally installed the PowerPC version of AirPort Utility. You need the "universal" or Intel version of it.
Where/how did you get the AirPort Utility that you are using?
OR are you trying to use "AirPort Admin Utility"?

Similar Messages

Error message airport utility not supported on this architecture

I'm using a macbook pro with OS X v10.5.8 and trying to set up a new Time Capsule network, however I'm getting the error message "airport utility not supported on this architecture". How do I fix this so I can set up my network?

Hmmm, that message would imply that Airport Utility is from a PPC Mac, or an older version of the OS?
Might download & install this...
http://support.apple.com/downloads/AirPort_Utility_5_3_2_for_Leopard
Also see...
http://support.apple.com/kb/HT1998

You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.

In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again.

Itunes not supported on this architecture?

I tried to open Itunes after running an update and an error message says:
"You can't open the application Itunes because it is not supported on this architecture." How do I fix this?
Could someone please help me? I didn't even know computers had architecture!

I tried to open Itunes after running an update and an error message says:
I'll 3rd the suggestion to use LCC to clean caches, rebuilt launch services.
What was the update? Take a look at http://www.macfixit.com for reports and whether you can 'roll-back' to an earlier version if it is a problem with an update.
Doing an Archive & Install might be necessary. Might also be there was a Previous System Folder from a prior Archive and Install or something else.
Finally, I would use Disk Utility First Aid to repair your boot drive (you need to boot from DVD or another drive) and strongly recommend investing in Alsoft Disk Warrior to repair the directory. Disk Utility is not 100% reliable at finding and fixes a number of problems.

Not supported by this architecture

Hi All.
My Appleworks 6 was working fine yesterday afternoon. I moved all of my word processing files to a flash drive to free up some hard drive memory. It was doing fine until this morning. Now, I can't open Appleworks and none of my files are readable. I keep getting this message: You cannot open the application Appleworks 6 because it is not supported on this architecture.
The appleworks folder is still in my applications and everything. So, what's up with this and can I somehow retirieve the lost documents?
Thanks!
Dottie

I transferred my Appleworks 6 from my old iMac to my new MacBook using the same flash drive that I tried to use last night for storing my documents. My documents and Appleworks were both functioning and everything last night when I turned off the computer.
Hi Dottie,
I'm assuming "the computer" refers to the MacBook, and that you were running AW on that before you shut down.
I'm also assuming that you still have the iMac and that AW isn't yet removed from it.
If so, try this:
Remove AppleWorks from the MacBook.
  --delete com.apple.appleworks.plist and the AppleWorks folder from yourname > Library > Preferences (folder)
  --delete AppleWorks User Data (folder) from yourname > Documents (folder)
  --delete AppleWork 6 (folder) from your Applications folder.
   (AppleWorks may not have created some of these files/folders yet, so don't fret if you don't find them.)
ZIP the AppleWorks 6 folder in Applications on the iMac.
  --Select the folder then go File > Create Archive
COPY the resulting zip file to the flash drive, then from there to the Desktop on the MacBook.
Double click the zip file on the MacBook to expand the archive.
Drag the AppleWorks 6 folder to the Applications folder.
At that point you should be good to go, but I'd take one further step before launching AW: Launch Disk Utility and Repair Permissions on the MacBook's hard drive.
Once you're satisfied that things are working, you should make a backup copy of the zip file, and to stay within the single user/single machine terms of the AppleWorks User Licence, delete AppleWorks from the iMac.
Regards,
Barry

My g5 wont let me download anything. everytime i try it says cannot open because it is not supported by this architecture someone please help

IM HAVING TROUBLE DOWNLOADING THINGS ON MY MY MAC G5. EVERYTIME I TRY TO DOWNLOAD SOMETHING A SCREEN POPS UP SAYING "CANNOT OPEN APPLICATION BECAUSE IT IS NOT SUPPORTED BY THIS ARCHITECTURE" SOMEONE PLEASE HELP

CS5 only runs on Intel Macs...
http://www.adobe.com/products/photoshop/tech-specs.html
Some parts of FCE 4 require an Intel Mac...
http://www.specrequirements.com/software/final-cut-express-4-system-requirements

YOU CAN'T OPEN THE APPLICATION VIRTUAL DJ LE BECAUSE IT IS NOT SUPPORTED ON THIS ARCHITECTURE .. What can I do to Fix this??

I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!

Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html

I downloaded Firefox 4 onto my PowerPC G4 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application "Firefox" because it is not supported on this architecture. I can't find my Firefox 3.6.16 I'm on Safari.

I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.

Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.

Mac G4 w/OS 10.5.8, New download won't open-not supported on this architecture, worked perfectly w/3.6 & down load said it will support Mac OS 10.5, what do I do to not lose all my bookmarks, etc?

I had 3.6 & the website said new Firefox, need OSX 10.5 or above. Now the icon in the dock has a white circle w/slash like do not enter & when I click on it, a box opens that says,"You cannot open the app Firefox because it is not supported on this architecture."
How can I get my Firefox back without losing all my info on my previous version?

The latest version for PPC users is 3.6.25 available at http://www.mozilla.com/en-US/firefox/all-older.html

I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

My Mac with OS 10.5.8 says I cannot open Firefox because it is not supported on this architecture. I tried to update my version, and this is all I get now. What can I do to use Firefox again? Thank you.

My computer is not allowing me to utilize any version of Firefox, after multiple downloading attempts. I simply get a message that Firefox is not supported on this architecture, and the Firefox icon in my toolbar now has a circle on it with a line through it (Canceled). I hope that someone can explain what I need to do to be able to use Firefox once again. Thank you, TC

As you have a PPC or Power Mac the last release form Mozilla to work on PPC is Firefox 3.6.*
Firefox 3.6.23 can be found at http://www.mozilla.com/en-US/firefox/all-older.html
Since you have a PPC Mac there is this third-party option for Firefox 7.0.1 at
http://www.floodgap.com/software/tenfourfox/
As of Firefox 4.0, a '''Intel''' Mac with OSX 10.5+ is required for Firefox builds from Mozilla. http://www.mozilla.org/en-US/firefox/7.0.1/system-requirements/

I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Firefox can't open the application "because it is not supported on this architecture

"You cannot open the application "Firefox" because it is not supported on this architecture."

Thanks for the link to the system requirements, edmeister. However, my system appears to fit every requirements listed, but still gives the same error message.
Here is what my system profiler tells me about my Imac:
Mac OS X v. 10.5.8
Processor: 2 GHz Intel Core 2 Duo, which Wikipedia tells me is "x86" processor
3 GB 667 MHz DDR2 SDRAM
My Activity Monitor says:
1.87 GB of my system memory free
303 GB of hard disk space free
Is there some explanation why I am being told Firefox 4 is not being supported on this architecture?

What do i do if i receive this message while trying to instal skype, etc 'You can't open the application "Skype.app" because it is not supported on this architecture.

what do i do if i receive this message while trying to instal skype, etc
You can't open the application "Skype.app" because it is not supported on this architecture. This also occur while trying to instal some other....

Hello,
This would indicate your trying to install a version for the Mac which require the Intel processor. (MacBook)
You need to install Skype for PPC Mac

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

Airport utility "not supported on this architecture"

Similar Messages

Maybe you are looking for