AirPort Utility on a Mac Pro can't administer AirPort Extreme

Hi,
I have had an AirPort Extreme from Day 1 and have been happy with it with one problem:
When I run the AirPort Utility on my Mac Pro I can see the base station but when I click on it to see the details and administer it it just sits there "forever" and doesn't open it up. My Mac Pro is connected to the AirPort Extreme via Ethernet, it doesn't have a wireless card in it.
The utility works fine on my MacBook Pro C2D (Wireless) and Mac Mini (wired).
Anyone seen this issue and maybe have a solution?
Thanks,
Steve

If you have a PC, AirPort Utillity would probably be under Start > Programs > AirPort Utility.
If you don't have AirPort Utility, you can download a current (and recommended) version from here:
http://support.apple.com/kb/DL1391

Similar Messages

Airport Utility supported in Mac Pro??

I have recently tried installing an Airport Extreme, but I receive the error message: "You cannot open the Airport Utility because it is not supported on this architecture"
I have a Intel Xeon Mac Pro, running Mac OS X.4.10. Shouldn't I have the necessary hardware to connect to the airport extreme??
Thanks!

Ok, I got clarification. Now the story is (after I requested they send me written statement that my Mac Pro processor isn't compadible with the 802.11n technology) that my Airport Card (in the Mac Pro) is an older card that supports .N but won't work like the newer cards. So basically the internet connection will be non-existent and network connection will be random at best. I asked if I could go to the Apple store and get a new card and I was told that they would put a new old card because the airport card I have is specific to each machine. I was also told that the airport cards are specific to the machine and that my new iMac from Dec 08 will have a completely different airport card than the Mac Pro or a laptop. I asked if I upgrade to a new Mac Pro would that fix the problem. I was told maybe but it would depend if the Airport card was a new spec like the iMac.
Bottom line, I'm getting the feeling that .N technology is overrated for my needs and I really need to hard wire my connection to the internet to get the performance and consistency I need.
2 reasons I went to the .N Base Station:
1) Reliable connection (getting bumped on 2.4 ghz connection)
2) Hopefully a speed bump in connection speed over the net
Here are specs based on speednet testing:
Mac Pro
5ghz (when I can connect)
Download 1500 kbs
Upload 510 kbs
2.4 ghz
Download 5500 kbs
Upload 1500 kbs
On the iMac
5 ghz
Download 9000 kbs
Upload 2500 kbs
2.4 ghz
Download 5500 kbs
Upload 1500 kbs
Any ideas if they are correct and I'm in the wrong???

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

Mac Pro can access other Macs but those same Macs cannot access the Mac Pro

Hello.
I have a highly annoying problem that goes as follows:
My (home) network consists of:
- 1 Mac Pro (e2008 - 10.5.6)
- 1 iMac (2008 - 10.5.6)
- 1 MacMini (2004 - 10.4.??)
- 1 MacBook Air (2008 - 10.5.6)
The internet connection is alive and well with no drops not that it truely matters here.
The setup is as follows:
- Linksys AM300 in half bridge mode connects to the
- Apple Airport Extreme Base station from which 1 cat6 cable runs to the
- Mac Pro
The other Macs connected to the Airport Extreme wirelessly.
The Mac Pro has its network settings setup correctly (in fact it used to work fine but then just stopped working) and I have also disabled all network settings, rebooted and reapplied the settings to no effect.
To clarify:
I (Mac Pro) can connect to all Macs in the network but all those macs can see me but not connect to me. Connecting via the Finder simply says "Connection Failed" and if I open the "Connect to server.." and enter the IP address of the Mac Pro it results in an error/failed connection also.
Any ideas to fix this would be highly appreciated.
PS: As of now, 19/03/2009, I have all software updates installed on all macs in the network.

Place the files you want to transfer on the Desktop
Click on the Finder or desktop to swtich to Finder, then Go > Computer, then double click on the boot drive, then on the Users folder.
Open the target User folder and inside is a Public folder > Drop Box, just drag and drop in there and the permissions change so that user can use the file.

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

Mac Pro won't recognize airport card or existing network

I have a 2007 Macbook in the house with an old Belkin MIMO router. the wireless netwrok works fine. In fact, my son waltzes in and says "hey what's the wireless password?" and logs on INSTANTLY on his Macbook Pro. Now we have a (desktop) Mac Pro with a new Airport Extreme card, and the Mac Pro cannot find the network - it's only 5 feet away. The name of the network does not appear where the network names should populate. We've typed it, and the WPA password in 100 times, and nothing, justs keeps asking the same question. Filling in PPPOE info doesn't work either.
NOTE: We do NOT have the airport extreme base at this house. We simply want the Mac Pro to FIND the existing network (Belkin wireless router and good old Airport on the 2007 Macbook so the Mac Pro can get on the internet wirelessly.
Anyone have any ideas? Is the bios just not recognizing the new Airport Extreme card? How should it be configured?
Thank you!

There are four tiny black wires inside, three of which must be correctly connected to the AirPort card before you have any hope of connection over wireless.
Stay away from PPPoE unless you have been told by your ISP that there is no other possible way to log on to the internet.
Turn OFF IPv6 if possible.
If the card is functioning, you get an Airport/WiFi pane in System Preferences > Network. You will also see it in System Profiler.

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Hi, I'm using the new Mac Pro
2.7 GHz 12-core Intel Xeon E5
64 GB 1867 MHz DDR3
AMD FirePro D700 6144 MB
OSX 10.9.2
I'm using After Effects 12.2.1.5
When I attempt to invoke the race trace 3D renderer in a comp, I get this error
"After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
So, obviously there is an issue here in that it thinks I have an Nvidia card.
I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
Any ideas would be appreciated, thanks!

> I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
Ugh. That causes so many problems.
The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

How do i share a file so another user of my mac pro can access

Hi
I have a file on my mac pro that I want others to use for presentations without them seeing all my private info. I have set up a new user but how do I share the file the other user on my mac pro can see it?

Place the files you want to transfer on the Desktop
Click on the Finder or desktop to swtich to Finder, then Go > Computer, then double click on the boot drive, then on the Users folder.
Open the target User folder and inside is a Public folder > Drop Box, just drag and drop in there and the permissions change so that user can use the file.

My mac Pro can't boot OS X, if it connected with iPod video

Hi All~ I have received the new Mac Pro, but I don't know why..... if
my iPod video(60G) had connected with USB ports of Mac Pro, then I can't
boot my OS system.... that seems the Mac Pro can't reach my hard
disk, because the apple log doesn't appear (nothing on the screen)
and everything is blocked, however when I put out the iPod, the Mac
would go into the system smoothly, I don't know why. there is no
problem with my powerbook or iMac G4 as the same situation to boot
the OS system. Is a new rule to start the system with Intel CPU?
Can anyone tell me what happen with my Mac Pro, does it have something wrong? Thanx
Reeeeegards,

Hi everybody!
I´ve a similar problem. However, in my case it´s not when I boot Mac OS X but when I boot into bootcamp with Windows XP. It takes a loooooooong time for the Mac to start the booting when my 80gig ipod is connected to the USB-port . Maybe you also have just to wait longer?
If I disconnect the ipod during this waiting period from the USB-port, the Mac starts booting immediatelly! Fortunatelly I´ve no problem when directly booting into Mac OS X.
Direct connection or connection via self-powered USB-hub, disk-mode or no disk-mode, ipod formated in Mac or Windows format, I tried everything, but it all made no difference. Any advice to solve the problem would be very wellcome.
By the way, I´ve another ipod connected via firewire, this is not causing any boot-trouble.

The network on my airport express works, have wifi on the ipods,etc. But when I open airport utility on my mac and on the iphone nothing exists. Why?

The network on my airport express works, have wifi on the ipods,etc. But when I open airport utility on my mac and on the iphone nothing exists. Why?

Reboot the modem. Just pull the power for a few seconds. No settings are lost. The laptop getting through to the internet is not relevent.

HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
Mike

Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

Hi, I'm running Mac OS X Lion 10.7.5 (11G63) on mac pro. can i update to Os X Mavericks? thanks

Hi, I'm running Mac OS X Lion 10.7.5 (11G63) on mac pro. can i update to Os X Mavericks? thanks

We don't know a thing about your hardware, so we really cannot answer. See below.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Mac Pro can't recognize 1GB Pen Drives... How to fix it?

Recently I keeps encountered the same annoying problem...
My Mac Pro can't recognize the USB pen drives when I or my co-worker plug into Mac Pro's USB port.
For a few times, if we are lucky, Mac Pro shows the pen drive on the desk top, but sometimes it can't read or write the data from/to the pen drive, many times, it simply freeze over.
Does anyone knows how to fix such problem? It seems to me that the new Mac Pro still has some bugs needs to be sort out...
Thanks in advance.
KC

Hi, Malcolm:
Thanks for the post.
No, my new Mac Pro system does not have USB port on the Keyboard, cause I've opted for Apple's wireless blue tooth mouse and keyboard.
I do have 2 USB ports on the Apple's 23" LCD display, and Two USB ports on front side and two available USB ports on the back of the Mac itself.
During the Thanksgiving long weekend, I think I might accidentally singled out the cause of my problem.
I have my HP printer and one multi-card reader constantly pluged into the two USB ports at the back of my Mac, and always tried to use the front side USB ports for the 1GB USB Pen Drives, and that's where the problem lays!
When I unplug the Multi Card Reader from the back USB port, and suddenly all USB ports on my Mac works just fine with the Pen Drives!!!
So, for now, I plug the Multi Card Reader in one the the front USB port, and the rest of the USB ports on the Mac work with Pen Drives flawlessly, it seems that I sloved my problem for the time being...
As for those two USB ports on the back of my 23" Apple Display, They can not take my USB Pen Drives, as you've mentioned that it does not have enough power for the USB Pen Drives.
K C
Mac Pro 2x3GHz Dual-Core Xeon, Power Mac G4 dual 1G MDD, 5G iPod 60G Mac OS X (10.4.8)

I have a new mac pro can, and was checking settings. I gave a user 'no access' who I didn't recognize, and loast all access to my computer.... Won't even reboot! Can anyone suggest anything?

I have a new mac pro 'can', and was checking settings. I gave a user who I didn't recognize 'no access', and lost all access to my computer immediately. Tried to change access back, but I was totally locked out (even as the admin). It won't even reboot! I thought it might have been back when I gave Adobe access (when they had their Cloud fiasco and my machine kept crashing with Premiere). Can anyone suggest anything?
MacPro 2013, 6-Core, 3.5 Ghz, 32 gigs of Ram, latestt update for Maverick
Thanks!

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
If you purchased it within 90 days yo have free telephone support from Apple
Complimentary Support (USA)
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Have AirPort Utility ver 6.1. Can't see printers or external hard drives. I could in earlier version. What gives?

With Airport Utility ver 6.1 can't see printers or hard drives. Dont' even see where to go for those screens. Was much easier in earlier versions. Question: How do I setup ext hard drives and printers in ver 6.1?

You don't need to "see" the printer for it to operate correctly using AirPort Utilty 6.1. If the printer was previously installed, it should continue to operate correctly. If you have a new printer, just install the device according to the manufacturers's instructions.
As far as being able to "see" a disk in AirPort Utility 6.1. Try the following:
Open AirPort Utility, click on the AirPort device, then click Edit in the next box that appears.
Click the Disks tab at the top of the setup window.

AirPort Utility on a Mac Pro can't administer AirPort Extreme

Similar Messages

Maybe you are looking for