Airport Utility on Mac and iPad can't see Airport Extreme or AEs

Airport Utility on my Mac can't see my Extreme base station or two extending AEs. I thought this might be because I've yet to upgrade my Mac software, so tried using Airport Utility on my iPad--same story. The Mac lists the Airports but with yellow ! warnings; the iPad just keeps searching. Yet the Internet is OK (and shows up with a green light) and I can connect to everything on the network.
Possibly unrelated, but our two Macs have each gotten the "IP address assigned to another device" message. Click Ok and it goes away and everything works, no rebooting or lease renewing needed.
It's weird. Not critical, as everything works, but worrisome. Ideas?

I had the same problem. My AirPort utility in Windows would not detect the AirPort Extreme until I was already connected to the internet. I have two routers in my house. When I connected to my other router and was connected to the internet via that, then my AirPort Extreme showed up in my AirPort.

Similar Messages

Have AirPort Utility ver 6.1. Can't see printers or external hard drives. I could in earlier version. What gives?

With Airport Utility ver 6.1 can't see printers or hard drives. Dont' even see where to go for those screens. Was much easier in earlier versions. Question: How do I setup ext hard drives and printers in ver 6.1?

You don't need to "see" the printer for it to operate correctly using AirPort Utilty 6.1. If the printer was previously installed, it should continue to operate correctly. If you have a new printer, just install the device according to the manufacturers's instructions.
As far as being able to "see" a disk in AirPort Utility 6.1. Try the following:
Open AirPort Utility, click on the AirPort device, then click Edit in the next box that appears.
Click the Disks tab at the top of the setup window.

Airport Express and iPhones can't see network-macs and ipad can?

I have an Airport Extreme base station connected to a comcast modem, with 2 express units for airtunes.
After some fiddling around due to the comcast outage, now I can't see either of the Airport Express units in the Airport Utility, AND neither my or my wife's iPhone can see the network. The iPad, iMac, Macbook and a PC can all connect no problem. My phone connects to wifi at work no problem.
Any thoughts are greatly appreciated!

Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Your settings should look like this:
Wireless Mode = Create a wireless network
wireless Network Name = Name of your wireless network
Check mark not needed next to Allow this Network to be extended
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = WPA2 Personal
Wireless Password = Backspace and retype your password here
Confirm Password = Backspace and retype your password
Click the Internet icon
Connect Using = Ethernet
If you have a simple modem (only one ethernet port), the setting for Connection Sharing should be set to Share a public IP address
If you have a gateway (combination modem and router with 3-4 ethernet ports), the setting for Connection Sharing should be set to Off (Bridge Mode).
Update to save changes
Restart all other devices
Any luck?

How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

Updated to Airport Utility 5.3.2 - now can't see my time capsule disk!

I updated to 5.3.2 of the Airport Utility through software update but, after rebooting both my Mac and Time Capsule, I can now no longer access my Time Capsule's disk. Airport Utility says 'no disks found'
A similar thing happened after the update to 5.3.1 but I could still see the disk in Disk Utility, and once I'd verified it, it all worked OK again.

Okay guys. I called apple support, and the guy there fixed it for me. Reset the TC, and go through AirPort Utility again. The disk is there! Very happy that it was that easy, but bummed that they let the firmware go out like that. Seems like they'd catch that sort of thing.
The support guy was great, though. Very quick.
Good luck, hope this works for everybody!
-B

Recently changed wireless routers and now can't see airport

Had airport express working fine with windows 8.1. Now I have upgraded my router and I no longer see the airport. How do I reconnect?

You have a new network....and the AirPort remembers your old one, which is no longer there.
The solution is to reset the Express back to factory default settings and then set it up again to connect to your new network, just like you did when you set it up to connect to your old network.
Power up the Express for a few minutes
Hold in the reset button firmly for 10 seconds and release
Allow a full minute for the Express to restart to a slow, blinking amber light
The Express is now back to new, out of the box settings, so you can set it up again.

HT201335 Please help! My iphone and ipad can't see Apple TV.

At first it worked well, then it stopped working. They're connected to the same network, the airplay on Apple TV is on, but I still can't get the Airplay icon appear on my iOS devices. What could I do?!

Restart all devices including the router.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.
As an example, html widget has white background on iPad, and black on mac. The same goes for interactive widget.
The MathType text inserted is inserted as a image, and will have the same color when in fullscreen as when not. So I need the textcolor to be the same in both views. Anyone know how to fix this?

We're still not communicating. This is why I wanted an example .iba.
Here's a re-creation of my own, going off what you described. You said "all html widgets and all gallery widgets" have this problem. So I inserted a blank HTML widget and a blank Gallery widget, and typed into both. Inserted a MathType equation into both. I don't see any difference when I preview it on my Mac compared to the preview on the iPad. I want to help, but I can't help if I can't duplicate the issue.
I've attached the screen shots and the .iba file [link to .iba file].
Feel free to email me directly at bobm at dessci dot com. If you're uncomfortable giving some information here, tell me anything you want in email. I work for the "MathType company", Design Science.

I made a photo book in iPhoto and would like to transfer the book to my iPhoto on other macs and iPad. How is this done and can it be synced between devices like photo stream.

I made a photo book in iPhoto and would like to transfer the book to my iPhoto on other macs and iPad. How is this done and can it be synced between devices like photo stream?

You can create a Quicktime movie slideshow of the book's pages and share that. Here's how to get your book into an iPhoto slideshow and then export as a Quicktime video:
1 - While viewing the book type Command+P to start the print process.
2 - click on the PDF button and select "Save PDF to iPhoto".
Note: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 200 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
3 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
4 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. Immediately select all of the photos in the new album and sequentially renumber them as "Page " using the Batch Change ➙ Title to Text with the option to add a sequential number to each title. This is to let you put the pages back in the correct order in the event they get sorted incorrectly.
Now you can proceed as follows: create the slideshow in iPhoto and export it out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large (480p with iPhoto 9),
Happy New Year

HT4906 i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

What version do you have?
iPhoto menu -> About iphoto.
What goes to your iPad/iPhone is controlled in iTunes.
Regards
TD

HT4967 I can sync data from my Mac to my iPhone and iPad and from my iPhone to the Mac and iPad, but cannot sync data from the iPad to either device. My iPad is configured to Push. Is there another setting than I'm forgetting?

I can update data from my Mac to my iPhone and iPad, and from my iPhone to my Mac and iPad, but cannot get data to update from my iPad to either my Mac or my iPhone.

If new calendar events entered on your iPad do not appear on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar on your iPad and be sure you have selected an iCloud calendar as your default and not something else like On My iPhone, a Gmail or Yahoo calendar, etc. If you haven't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
If your settings are correct and new events still aren't appearing on icloud.com, add any missing calendar events from your iPad to your calendar on icloud.com. Once the calendar on icloud.com is up to date with your iPad, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPad when prompted (they will still be in iCloud), then after a 15 seconds or so, turn Calendars back to On. Then add a new event on your iPad and see if it appears on your calendar on icloud.com now, and on your other devices.

Can't receive Facetime calls on Mac and iPad

I can send calls on my Mac and iPad, but I can't receive calls. Why?

Did you eventually get it to work? If so what did you do?

Airport Utility on Server can't see Airport N Gigabit

First off, my setup: A server running 10.5.4 Server; a MacBook Pro running 10.5.4 client; an Airport Extreme Base Station-N/Gigabit.
The problem is that from my server neither Airport Utility or the RADIUS service can see or config my Airport, but from my MacBook Pro, Airport Utility can see it just fine whether wired to the same network as my server or when connected via Wi-Fi. The version of Airport Utility is the same on my server and MBP. All three –– the Airport, the server, and the MBP –– are connected via the built-in switch on my router, so there should be no reason why my MBP can see the Airport but my server can't. I've also tried pinging the Airport from my server and did so successfully, so I know there's a good network connection (besides the fact that no other service is having trouble talking to my server from either inside or outside my network).
Thoughts?

Airport utility on my Mac (10.7.5) doesn't see AX although it is connected to the internet through it.
Apple uses the AX abbreviation for the AirPort Express. The AirPort Extreme is known as an AEBS.
If you have an AirPort Extreme, temporarily connect a spare Ethernet cable from your Mac to a LAN <-> port on the Airport router to see if AirPort Utility can "see" it that way.
If you happen to have an older "round" AEBS, AirPort Utility 6.2 cannot be used to configure this older version of the AirPort. Instead, you will need to use AirPort Utility 5.6 for Mac OS X Lion for that task.
My objective was to install an extern backup drive (to configure Time Machine through the wifi)
Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme, so your results may not be to your liking if you try this. It does seem to work for some users....while other users (like me) have nothing but problems when they try this.
If you happen to have the older "round" version of the AirPort Extreme, the USB port on that version will only support the print function.

Apple shop changed my iphone 3gs today, got home and cannot join my wifi. both my mac and ipad is working on wifi. tried rebooting, resetting still doesnt hold the wifi, it's there for a sec then its not connected.help please?

Hi,
Apple shop exchanged my iphone 3gs today. got home but it doesnt pick up the wifi. first the correct supplier appears then it says not connected.
both my mac and ipad is working on wifi (so did the previous phone) i ve tried rebooting, tried reset supplier...nothing works. can someone help please?
thanks

Yes, they should be able to verify that WiFi is working properly. If I just got a new phone & it didn't work perfectly, right out of the box, before I started restoring or whatever, I'd be right back where I got the phone.

When I connect my iPad to my new Mac Pro, I can't see my pictures

When I connect my iPad to my new Mac Pro, I can't see my pictures on iPhoto in Mac Pro under devices.I want to import my photos from iPad to Mac Book. Can you please help me?
Thanks and regards,

Oops ... You are correct. I misread your question. My sincere apologies. You want to import the photos from the iPad into iPhoto - not the other way around.
Connect the iPad to the Mac with the cable and launch iPhoto. Your iPad should appears under the devices heading in iPhoto - in the left sidebar - just like it does in iTunes. Click on the iPad name. Then you can import the photos.

Airport Utility on Mac and iPad can't see Airport Extreme or AEs

Similar Messages

Maybe you are looking for