AirPort Utility resetting Time Capsule TCP/IP after setting change
I have a 2 TB Time Capsule and am using AirPort Utility 7.5 on a Mac OSX 10.6.3 machine. I am in a situation where I have to set TCP/IP settings manually to a local network. I generally connect a primary workstation via the local ethernet ports on the Time Capsule and occasionally bring up the wireless network for other devices. When I use the Manual Setup options with the AirPort Utility, and either create the wireless network or turn it off, my TCP/IP settings revert to DHCP, and I lose my manual IP and router entries.
Has this happened to anyone else? I have searched through a number of posts that come up in searches, but have not seen a hint of this issue.
The *Airport Utility* is only up to version 5.5.1
http://support.apple.com/kb/DL955
Do you have the latest firmware version 7.5.1
From your post, you only mention 7.5
http://support.apple.com/kb/DL849
Make sure you have both of the above and let us know if this works for you.
Similar Messages
-
Time Machine, AirPort Utility, and Time Capsule broken in Mavericks?
Hi all, I’ve got a befuddling Time Machine/Time Capsule/Airport problem that I can’t seem to sort out.
On my pristine 2-day-old iMac (late 2013, running 10.9.1), I’m trying to set up Time Machine to back up to a new-ish 3TB Time Capsule. Initially it worked fine for the first backup, but subsequent backups failed because “backup disk could not be found.”
So I tried giving the TC a shorter name. The first backup under the new name worked a treat, but subsequent backups failed.
In Time Machine system pref pane, I deleted the Time Capsule, intending to try again with a new, even shorter name. But then when I went into AirPort Utility to change the Time Capsule name, it told me that “no configured AirPort base stations have been found.” I assumed that I was just deleting it as a choice on the backup disk list, but now I'm wondering, did the Time Machine pref actually delete the actual disk? In the AirPort Utility window, Time Capsule appears in the "other wi-fi" devices list, yet when I click it, it says "error reading settings."
Here are some other random details that may or may not pertain:
On the new iMac, I tried to mount the TC disk image, but Connect To Server reports that the connection fails because “the server may not exist or is unavailable.”
Although the Time Capsule shows up in the sidebar of the Finder window, “getting info” just produces the spinning wheel.
Although AirPort utility says that it can’t find the Time Capsule, the TC is nevertheless connecting to the internet just fine. All household devices are online, including iPhones and iPads.
On the old Mac Pro running 10.8, Time Capsule, Time Machine, and AirPort Utility all behave normally.
I thought I might try resetting the Time Capsule, but will this erase all the backups (from other computers around the house all running 10.8x without problems of any kind) that are on there? The other computer users will definitely squawk about that!
I hope this tirade makes some sense. Thanks for reading!1. In Time Machine system pref pane, I deleted the Time Capsule, intending to try again with a new, even shorter name. But then when I went into AirPort Utility to change the Time Capsule name, it told me that “no configured AirPort base stations have been found.” I assumed that I was just deleting it as a choice on the backup disk list, but now I'm wondering, did the Time Machine pref actually delete the actual disk? In the AirPort Utility window, Time Capsule appears in the "other wi-fi" devices list, yet when I click it, it says "error reading settings."
Here are some other random details that may or may not pertain:
2. On the new iMac, I tried to mount the TC disk image, but Connect To Server reports that the connection fails because “the server may not exist or is unavailable.”
3. Although the Time Capsule shows up in the sidebar of the Finder window, “getting info” just produces the spinning wheel.
4. Although AirPort utility says that it can’t find the Time Capsule, the TC is nevertheless connecting to the internet just fine. All household devices are online, including iPhones and iPads.
5. On the old Mac Pro running 10.8, Time Capsule, Time Machine, and AirPort Utility all behave normally.
6. I thought I might try resetting the Time Capsule, but will this erase all the backups (from other computers around the house all running 10.8x without problems of any kind) that are on there? The other computer users will definitely squawk about that!
I hope this tirade makes some sense. Thanks for reading!
Rather than chop up your post I have taken the liberty to number the points.
1. When you deleted the TC in the airport utility you simply changed its ability to display the errant device. You did not actually delete anything on the TC itself.
Getting back a lost Airport.. more below.
2. Please give actual command you used.. and the name..
It is most important that you translate the name from Apple name to actual network name. That is why I constantly hammer on about using network names.. short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule apart from being hopelessly wrong.
Is translated by Apple to the Network name.. Fred-Blogs-Airport-Time-Capsule (note.. no spaces and no special characters.. the apostrophe is deleted).
It can be much easier to just use IP address.. if the TC is the main router.. then it will hold a constant IP.. by default 10.0.1.1
So mount the TC as AFP://10.0.1.1
3. That is standard.. it is a network device and will not show info. Same on any computer in your network.. same on any OS.
4. Yes, that is standard.. the location of the hard disk is lost.. but the internet is still working.. This is the bug that has been around since Lion and is still growing worse with each revision.
5. Again standard. the issue is on the computer or the interaction of the two.. computer and TC.. yet other computers are unaffected.
6. Reset of the TC is fine.. no reset, soft hard or factory will ever delete the hard disk files.
But if you change the name of the TC, you will need to go around to all the computers and setup TM again to point to the right target.. none of the backups are lost.. you just need to tell TM where they got to.
Manual setup of the lost TC.
In Airport utility go to the top menu, open configure other.. and type in the IP address of the TC that got lost.
no password needed unless you set something .. if it doesn't work the default is public -
Printer Doesn't Appear in Airport Utility for Time Capsule Setup
Hello group.
I've been researching solutions, applying them and contacting Apple for help and so far - I'm still in a pickle.
Here's the skinny:
1) Have AT&T Uverse with AT&T wireless modem. This runs cable/TV, phone, fax and Internet.
2) Setup MacBook Pro, Snow Leopard 10.6 and Airport Utility 5.4.2.
3) Purchased a Time Capsule (1TB).
4) Printer is a HP Officejet 6210 All-in-One.
I would like to use the TC's wireless printing capabilities. However, when I access Airport Utility, it doesn't recognize or acknowledge the HP printer connected to the TC. It simply states: NONE.
What are some of the things that I've done to try and remedy:
1) Uninstalled and reinstalled HP's current driver and software from their website.
2) Removed and added back the HP printer through the 'Printers & Faxes' pane.
3) Powered down the HP and the TC, disconnected all plugs and powered back up multiple times.
4) Restarted the MacBook several times.
5) Spoke with HP Mac Support and received confirmation that printing should work with TC and HP 6200.
6) Spoke with Apple and they are perplexed.
7) Performed both 'soft' and 'hard' resets of the TC - still nothing.
8) Read and followed the steps in this article: http://support.apple.com/kb/TS125 (nothing worked)
9) Plugged the HP directly to the MacBook and it prints perfectly.
10) Tested the TC USB port with a flash drive and it recognizes (via AU) and works without error.
I'm at a total loss. Perhaps I have the wiring and setup options chosen incorrectly? Would love any help that can be provided.
Worth mentioning - prior to the TC, I had purchased and Airport and was able to print wirelessly without a hitch. The Airport was exchanged for the TC (needed backup capabilities) and now I'm in the lurch.
Thanks to all for any assistance that can be given.Welcome to the discussions, MindSprout!
I'm following your post with interest because I have an HP 6210 as well with a 1TB Time Capsule. No issues at all since it was installed over a year ago. I'm not using Snow Leopard (yet), so can't offer any comments as to whether that might be one of the possible issues here, but that was my first thought.
If I get SL installed this weekend, I will post back with results.
The other thought that comes to mind is that there may be a problem with the printing instructions passing through the USB port on your TC. I can't answer why a hard drive functions perfectly, though. -
Airport Utility Recognizing Time Capsule
Hi,
I've read through some of the posts regarding this problem, but could not see that anyone had found a definitive way of solving it so I wanted to add my question to the mix.
I just bought a Time Capsule and have encountered the following problem in setting it up. The very first time I plugged in the TC and brought up AirPort Utility on my MacBook Pro, TC came up in the list on the left. I went through the process of configuring it in there and got to the end. Then APU said it was restarting the TC. It did this for a while and then the program timed out and stopped doing anything. I've been unable to get APU to recognize the TC again. I've tried wirelessly, I've tried connecting the laptop to the TC with an ethernet cable, nothing.
I already have a wireless router and my internet connection has been unaffected by my problems with the TC. Can anyone give me some help? I'd primarily like to use the TC as a wireless backup drive (don't really care about using it to connect to the internet). I also have another laptop (another MacBook pro bought last week) that I'd like to put on eventually as well. But would be satisfied with one for now.
I've got the latest versions of OS X and APU, and I've turned AirPort off and on, I've turned the TC off and on and still nothing. The blinking amber light is all I get.
Suggestions?
Thanks.If you cannot access Time Capsule via AirPort Utility, try a hard reset and start setup procedure again.
http://support.apple.com/kb/HT1300 -
Airport Utility and Time Capsule
So as part of my new IMAC puchase I also purchased Time Capsule (TC) 2TB as a backup and wi-fi option. It asked mt to configure it as a 'Bridge' which I did.
I also have the lasest version of Airport Utility 6.3?. I installed the TC as per instructions and created a new Wireless newtork and and I can access the TC and the Internet. All fine there. However when I look at the Airport utility option and try to change or look at settings as per the manual
On a Macintosh computer using Mac OS X v10.4 or later:
1 Open AirPort Utility, located in the Utilities folder in the Applications folder.
2 Select your Time Capsule and click Continue.
If you don’t see the Time Capsule you want to configure, click Rescan to scan for
available wireless devices, and then select your Time Capsule from the list.
3 Follow the onscreen instructions to set up your Time Capsule and your wireless
network.
I cant see my TC as under Airport Utility to do the above. I get messages saying I haven't created amn Airport base station and yet I can see the TC and it will do Time Machine backups ?
So question is how do I create a 'base station' so I can get to view the settings in Airport Utility.
Additionally my PS3 needs to be re-configured and is asking for WK2 passwords - which were set up automatically when I ran the TC install. Question is how do I see these passwords.
I've read the forums but camt find a post/amswer that can help me, so any replies from the 'experts' is appreciated.Hi Gilgamg,
Thanks for visiting Apple Support Communities.
I'd suggest resetting the Time Capsule and then setting it up again:
Resetting an AirPort Base Station or AirPort Time Capsule FAQ
http://support.apple.com/kb/HT3728
Setting up Time Capsule for the first time
http://support.apple.com/kb/HT1178
If the Time Capsule still doesn't appear in Airport Utility, see the "Troubleshooting missing devices" section of this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Regards,
Jeremy -
Airport utility message; time capsule disk needs repair
It is a one month old Time Capsule and was working fine. The light is blinking yellow. I tried a restart on the time capsule. The airport internet is working fine. I opened disk utility but I do not see the time capsule disk there. Any help would be greatly appreciated?
You cannot fix a network disk from disk utility.. it only works on local disk.
I would return it now. Today.. while it is still called Today.
A disk that goes faulty that fast is doomed to early failure the next time.
There is only one function in the TC.. erase the disk.. do a one pass erase if it works.. note this may be greyed out if the disk if not even reachable.
You can also turn off the TC for a couple of hours to cool down.. is it hot btw?? It should run no more than just warm now.
Otherwise exercise warranty immediately.. to be a pain.. ask why they used Seagate drives after the iMac replacement program. -
MacBook is connected but Airport utility shows Time Capsule as not present
Folks
I get a strong signal from the Time Capsule, and internet works great, but my Airport Utility 6.2 does not show is as present.
I'm using OS 10.8.3. Is there some kind of updated I am missing? Same issue on both my iMac and MacBook Pro...Did you reboot the whole network.. ??
Restart in correct order.. modem.. TC.. Client computers. 2min gap.
Any luck?
If not post back and we can do some more but this is getting worse with every update.
It works like magic.. on Snow Leopard and 7.5.2 firmware.. everythng else has been downhill. -
How do I connect to my Airports/time capsules over the internet using the mobileme function under icloud?
i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well -
i use to connect my iphone 4s to my time capsule through wirless, for some reason, the time capsule IP address changed and i had to retern it the correct one. when i did this , my iphone stopped connecting to the time capsule wireless . how cn i return the connection to the iphone 4s?
thank youReset the TC.. use SMB names, short, no spaces pure alphanumeric for everything.
TC name, wireless name, hard disk share name.
Fix the radio channels.. try channel, 6, 11 maybe 1 although I have heard people have issues with 1.
It sounds like the TC is bridged.. make sure the main router dhcp has sufficient addresses available.
There are a few other things but try those and post again if you still have issues. -
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Best way to extend wireless via airport express and time capsule
best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank youWhat you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps. -
How shall i do it ? Complex question about how to use the airport express or time capsule ?
Hello All,
Right now i have an access point:
1/ A mercury router (cheap and old)
2/ Airport Express
Do you advice me to use it to replace my cheap old router (mercury) or to pair it with this main old router ? (however i tried to without any success)
3/ Time Capsule
Can i use it to relay the signal from the Airport Express to extend the range of the wifi?
Can i use it to stream music to my B/W M1 speakers directly ? (I will connect by USB the BW M1 to the time capsule) and would like to be able to play music this way. Is this in anyway possible ?
Many thanks for your reply !ok, i might be wrong but here goes:
you should attach your modem to your time capsule: your time capsule will act as not only your time machine but also your main wireless transmitter.
you set it up using "Airport Utility" which is inside the "utilites" folder, which is inside your applications folder.
this connects your mac wirelessly to the internet.
to stream music to your speakers you then set up the airport plug to (a) join the existing network (which you set up on the time capsule) and then (b) set it up to stream music to your speakers. again, this is done using "airport utility". do it AFTER you have set up the time capsule.
you will then be able to use itunes to stream music to your speakers. from itunes on your computer you will be able to chose from the bottom right hand side of the window whether you play the music on your computer or wirelessly into your B+W speakers...
some notes:
1. you won't be able to connect the airport plug by USB to your speakers as the airport plug doesn't have a USB output. It has only analogue and optical.
2. although your time capsule has USB you cannot stream music into it or through it. there's some basic guidance here:
http://www.apple.com/wifi/
3. you may find that the sound quality [if you are playing apple lossless files or wav files) isn't as good as if the speakers were connected directly to your mac via USB. this should be especially noticable because your speakers are so good!
if the music you play is only mp3 or the stuff purchased from itunes then it shouldn't make too much of a difference.
4. keep an eye out on the B+W website: there may come a time when you won't even have to use the airport plug, and you will be able to stream music straight to the speakers. i know that B+W have just done that with the new Zepellin speaker that they make.
hope this helps... -
HT3728 Reset Time Capsule password.
Must I reset Time Capsule in order to change my password? (I have *not* forgotten my password; I simply want to change it.)
Thanks.A) how long the password lenght it is avaiable for this time capsule
WPA uses either a passphrase (shared secret) that is comprised of 8 to 63 characters or a fixed-length of 64 Hex characters. These can include special characters and spaces.
B) how to reset the time capsule
Please review the following Apple Support article for how to reset your Time Capsule.
C) how to change the ssid
You would change the SSID, what Apple calls the Wireless Network Name, by using the AirPort Utility, as follows:
Run the AirPort Utility.
Select your Time Capsule, and then, select Edit.
Select the Network tab.
Enter the desired name (SSID) in the Wireless Network Name field.
Select Update, and then, allow the Time Capsule to restart. -
Cannot connect Airport Express to Time Capsule?
I had an existing wireless network with an Airport Extreme base that was extended with a first generation Airport Express. I replaced the Airport Extreme with Time Capsule because I needed the backup drive. Now I can't get the Express to integrate. When I try to bring it online, it brings everything down. I've reset it back to its defaults and am installing as if its new. The problem is that it brings everything else down. The two are connected via ethernet. For now I've had to take the Express offline until I can find a solution. Any advice?
Welcome to the discussions!
I don't have a solid answer yet to your issue, but would offer a few comments that might help sort things out.
I'm confused by your statement that you are able to extend the 2.4 GHz network, because the dual band TC does not allow the guest network to be extended. Check AirPort Utility - Manual Setup. Click the Wireless tab. I don't have a dual band TC, but I believe if you click the Options button, you will see more info about extending.
While there is a check box next to "Allow this network to be extended" for the main network, there is not a check box for the "Guest" network. It's not there, or least it's not there in the guide that I'm looking at.
I suspect that your computer was picking up the 2.4 GHz network from the TC, not from your Extreme. To verify this, open AirPort Utility again and click on Manual Setup for the TC. On the summary page, note the MAC address for wireless on the TC. Now, do the same thing for the Extreme.
Use your computer now to check things. Hold down the option key and click on the Airport icon at the top of the screen. The MAC address of the device that you are connected to will be displayed.
Have you tried to move the Extreme to a more remote location? You note that you have the two devices, TC and Extreme very close together. As a test, position the Extreme approximately half way between the TC and the area that you want to extend to and see if you can connect with your computer. Check to see if your computer is connecting to the Extreme or the TC by holding down the option key as above.
You have probably already done this, but check on the setup for the Extreme using AirPort Utility - Manual Setup - Wireless tab. There is a check box either on the Wireless page or the Options page to "Allow wireless clients". This must be checked for wireless clients to be able to connect to the the Extreme.
Post back with your findings and we'll try to figure this out. -
I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?
Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...
Maybe you are looking for
-
I have an iPhone and recently bought an iPod 4 touch what l am using the same apple ID for. The iPod won't let me download songs from iTunes it is asking me security questions which I don't think I have put answers to in the first place, because of t
-
How to handle the control records in case of file to idoc scenario.
Hi All, can you please clarify me how to handle the control records in case of file to idoc scenario.
-
Photo icon in camera app on iPhone 4 not working
I updated my iPhone 4 to the software 5.0 when it first came out a few months back. When I go to my camera app, on the bottom left, there is an icon that takes you to your photos. When I press it, it says, "No photos or Videos" and I do have photos i
-
DPS not found on your system error message
PLEASE HELP: Does anyone know why I am receiving this message, as I hdo have the latest version installed.? Walton Ramsey
-
Hello I need to know how can I to separate for source o calling number the calls to made a call type in webview? Anyone can help me? Thanks