Airport Utility shows other peoples units - I don't want that!
As of this morning my Airport Utility shows a lot of unknown devices belonging to other people. I have set the utility to only monitor units I have configured.
The problem started when I say a lot of unkown airplay speakers show up in iTunes...
Can anyone help?
It seems that our internet provider has changed some settings so we now - instead of operating the Extreme in bridged mode - should set the router/Extreme to share a public IP address. However, I get an error message that no IP address assigned. I have talked for half an hour with our provider and they say everything is fine at their end and that there perhaps is some setting in the Extreme that should be checked in order to get it to work.
Can you help?
Similar Messages
-
Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks
There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts. -
Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?
Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced. -
I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?
Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem. -
The Time Capsule is not providing a wireless connection.
When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.Which model TC is this? The A1xxx number from the base please.
Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
Do the factory reset.
Now check if TC comes up in airport utility..
If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
See below.
Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?
Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
If your existing router is not an Apple AirPort Base Station, the Express:
can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility. -
I using my ipad id I want to update as show other people Id..., When I using my ipad id want to update as show other people Id...
Do you recognise the id e.g. has anybody else used your iPad and downloaded and/or synced apps from their account onto it ? If so then those apps will be tied to that person's account, and only that account can download any updates to those apps.
Otherwise you can log out of the currently logged in account on the iPad by tapping on the id in Settings > Store and you can then log in with a different account. -
Error Message, during installation of Lion; “This disk is not formatted as Mac OS Extended (journaled). Use Disk Utility to enable journaling or reformat the disk.” The disk I selected to install OS X on, was the only one listed, “Macintosh HD”. The results of a Disk Utility check are; Format: Mac OS Extended (journaled), Name: Macintosh HD. There is a fresh Time Machine backup. The computer was Restarted and installation attempted again - same result. I have downloaded Lion a second time, and tired install again, same results. The computer is a December 2007, iMac 24” with 2.4 GHz Intel Core 2 Duo, 4 GB Memory, s/w version 10.7.5; Disk Capacity 319 GB, Available 117 GB. Macintosh HD has alway been the system disk, does it now have an identity crisis? Would reformatting the disk mean Erasing it? Exactly what do I do in Disk Utility to “reformat” the disk, I don’t see that listed on the menus. This computer is getting cranky, I no longer Shut Down at night, only Sleep. If it’s Shut Down, the next morning I am treated to a white screen, for a long time, before it finally shows me the Log On Screen. Suggestions would be appreciated.
RRFS - This took me a long time to finally get to a fix. Your reply led me to investigate the Repair Disk Partition - as it turned out there wasn't one; the HardDrive was going bad slowly. The 10 to 40 minutes it took to startup in the morning, was the HD trying to find it's way. I had the 320GB HD replaced with a 2TB HD. All is OK now. Thank You very much!! Also, the Apple store geeks couldn't make it better but the locally owned Apple retailer did just great with it. from San Luis Obispo County - Peace.
-
Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7 Ultimate
Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.
-
I just purchased the newest episode of a tv show and I selected the correct episode, but it downloaded an older episode under the new title. I don't want that one what should I do?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the mislabelled item. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
i was normally paid one app,and because i must pay every month my visa i stop pay the bank cause i didn't want to have the visa active anymore and now everytime when i want to download something anything it show me that i must update my billing info,why?i don't want that i don't have visa or something anymore..
Yea I know that but I don't want to put any information visa or something...I don't have anymore and I paid this app but still saying to me that I didnt ***?
-
When I write a birthday at NUMBERS as (for example) 25.01.2005, it always shows 01/25/05. I don't want that! How can I change it?
What are your settings in System Preferences > Language & Text > Region? Numbers uses your system setting as default.
-
Homesharing music shows books as well ... I don't want that.
I put on homesharing on my desktop and laptop.
Music is on a NAS, but via my desktop.
On my laptop I see Also books in iTunes. Don't want that. What can I do?If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.
Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them. To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account. -
I would like to create an Ibook. When I open one it automatically fills in the pics. I don't want that to happen, I like to drag them in one by one. What to do?
Are you using iBooks Author?
If so you can choose a blank template.
iBooks Author > File > New from Template Chooser... > use the Blank template. -
I've updated my phone and I've made a backup. but now it says I must enter my code to restore all my files and I haven't got this code. If I cancel the process or choose something else, all my stuff will be deleted, and I really don't want that.
HELP ME PLEASE!!!If, for some reason, your backup got encrypted and you don't know the code, you'll have to set up your phone as new device and start all over again without the backup.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
If you can't get pass the lock screen, connect in recovery mode and restore the phone, you'll have the option to reset the lock secreen passcode.
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Maybe you are looking for
-
SMB File Sharing only works for Admin Accounts???
I'm using a mac mini as a small file server. It will share files to WindowsPCs using SMB but there is a problem. On the Option dialog where you select accounts to share files and folders using SMB only Admin accounts show up. This is far from ideal a
-
We currently have two ipods on my laptop (my laptop Vista). Last week we purchased another laptop(Windows 7). Both laptops use the same email address.I'm not sure what to do so he can now use his ipod on the new laptop. Please give specific instructi
-
Creating a cookie, constructor problem...
I have a servlet that creates a cookie when a user registers... int typeUserInt = Integer.parseInt(typeUserString); if(typeUserInt == 0) { Cookie cookie = new Cookie("trialUser", customerid); cookie.setMaxAge(86400*14); resp
-
How do I transfer plugins from PS CC to the 2014 version?
I downloaded a big bunch of plugins for Photoshop CC. Now I also have downloaded Photoshop CC 2014. How do I connect all those plugins to the 2014 version?
-
Absolute positioning requires a containing element. I'm taking a class on HTML5 and CSS3 from ed2go.com. A photo display using thumbnails in a table shows the full size picture with its corner in the center of the thumbnail when you hover over the th