Airport utility v6 doesn't see old airport extreme 1st ten

Using new version 6 Airport Utility, does not see older Airport Extreme (1st gen) that is on my network. It sees my newer AP extreme and shows the ID for old machine yet I can't get to it to change configuration.

You will need to download and install AirPort Utility 5.6 for Mac OS X Lion to be able to access and make changes to any of the older AirPort products. AirPort Utility 6.0 only works with newer "n" devices.
You can use the more functional AirPort Utility 5.6 to configure all of your AirPorts...old or new.
Just keep both versions on your Mac and use the one that you want.

Similar Messages

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Running Airport utility wirelessly, doesn't see my basestation

Here's a possibly stupid question, but I hate to mess around with my Airport Extreme setup once i have it working.
When I try to run Airport Utility connected wirelessly from my laptop, it does not see my base station or the express I have extending it.
if i connect directly with an ethernet cable, it sees it just fine.
I can scan for the station but it just won't see it unless I plug in the cable.
What do I have set up wrong?

The Windows Firewall and or anti-virus program on the PC is likely blocking the wireless connection atttempt.
Probably best to leave things alone unless you are familiar with creating "exceptions" in the Windows Firewall and/or anti-virus programs.

AP Utility 5.4.1 doesn't see my AirPort Express but iTunes 8.0.2.20 does

I have 2 AEs connected on a wired lan on Win XP. The new version of the AirPort Utility (5.4.1) can't find them but iTunes 8.0.2.20 does see them. I can also ping them using a net utility to find the IP addresses.
Is this a known problem? To which previous version of the AirPort Utility should I revert and where do I find it?

The Airport Express is quite old, i've had it for many years, not sure how long, probably first or second generation. It says it's model A1084, 2005.
This would be an 802.11g AirPort Express base station. There is only one generation of this version.
When i click on the icon in the Airport Utility, it says this version of Airport Utility (v.3.6.1) doesn't support this base station.
I'm not aware that Apple produced a v3.6.1. Did you mean v5.6.1 instead? If so this version is meant to administer these older 802.11g AirPorts on Macs running OS X Leopard or Snow Leopard. More precisely for versions 10.5.7 thru 10.6.8 ... so your MacBook should be able to run this version of the AirPort Utility.
I played music through the external speakers as recently as a couple of weeks ago, both in iTunes and on You Tube.
If you are streaming from YouTube, then you must be using a third-party solution like Rogue Amoeba's Airfoil. Is this correct?
The only thing that has happened recently, though i don't know why it would make any difference, is that a few days ago for the first time, i did a backup of my hard drive to the Time Capsule, using Time Machine.
You're right. That should have not made any difference as far as streaming goes.

Airport Utility 5.6.1 doesn't see my Airport Extreme

I'm good with the Ethernet connection for the internet, but Airport doesn't see my Airport Extreme. It's connected to my IMac 10.6.8. Have tried a reset with ballpoint pen, but nothing happens. This all went crashing down the other evening with I suddenly had lost Internet on my MacBook Pro. This ***** so bad. Would it do me any good to call Apple support?

OS X 10.6.8 is Snow Leopard for which you need AirPort Utility 5.6.1.
There are no special techniques to download it. Just click on the link, then click the blue Download button, which will download and eventually deposit AirPort Utility 5.6.1 in your Downloads folder.
It looks like this:
Double-click it to extract the package installer. It looks like this:
Double-click that to open the installer:
Click Continue and follow the prompts, which will either install it in your Utilities folder or tell you a reason it cannot.
After you perform the "hard reset" and the Extreme's LED is blinking slowly, go to your Wi-Fi menu and see if you find a network called "Apple Network nnnnnn". Select it, then launch AirPort Utility.
The reason that everything is greyed out is that AirPort Utility cannot find any base stations to configure. If after doing all the above it still cannot, perform another "hard reset". If that does not work, perform a "factory defaults reset" as I explained above.
What happened at the Apple Store? Other than having a nice ballpoint pen with an Apple logo on it, they are not going to do anything more than you can do.
If you did not bring it there yet, bring your MacBook Pro along with you so that you can see for yourself how it ought to work.

My Airport Utility doesn't see my Airport Express??

My Airport Utility doesn't see my Airport Express. . .so I cannot run iTunes. . it used to work fine. .

Version of utility, and express? Makes a huge difference.

After port forward, airport utility can no longer see my time capsule

I tried to forward public port 1025 to private port 80 on a raspberry pi using airport utility. But after I did that, the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
Thanks,
Michael

It doesn't sound like a port that is used.
From the standard google search.. nope.
Reboot the whole network..
No luck tell me what OS version you are running the utility on and what model and firmware TC???
Note with Yosemite, anything can and will happen.

Airport utility 6.3.4 sees my airport express but 5.6.1 doesn't

I've done a factory reset on my old style airport express. I know that I need to use airport utility 5.6.1 to configure it, but it won't show up there. However if I look under the wifi icon at the top of my Macbook I can see it there, but of course 6.3.4 won't configure it.
I have another old style AEx which shows up fine in 5.6.1. Any ideas please?

Perform a factory default reset on the older AirPort Express as follows:
Power off the Express
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously power up the Express
Release the reset button after the hold period
Allow a full minute for the Express to restart to a slow, blinking amber light status
Using AirPort Utility 5.6.1, see if the older Express will appear so that it can be reconfigured
If the Express will not appear after a few reset tries, it is defective and will need to be replaced. Since the Express is at least 8+ years old....probably older....and the average life of an Express is about 4-5 years, the Express has had a good life.

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

In my Airport Utility a read the following message:
This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

AirPort Utility was unable to find any AirPort base stations...

I recently purchased a new AirPort Extreme base station 802.11n, and I followed the manual to get it set up. I installed the software, but when I launch AirPort Utility it cannot detect my base station. (I get the above error message).
I've got an old G4 desktop mac (QuickSilver model) running OSX 10.4.10, and it's got the original AirPort card installed. I've made sure AirPort it turned on in my menu bar.
I decided to set up my base station by connecting an Ethernet cable directly from my base station into my Mac, and set up my network that way. But as soon as I try it wireless, then AirPort utility looses the base station.
My base station is connected to a Netgear ADSL2+ Modem Router DG834. (The router and my internet connection are working fine). I've got all solid green lights on the router and the base station.
Is there some compatibility issue with my old AirPort card and my new base station? Or do I have a faulty card maybe?
Any advice appreciated.
Thanks, Tom.

I have the same setup as you and I had problems like yours. For some reason the old airport card doesn't seem to work with the new airport extreme base station if you are using WEP encryption. WPA works fine. In order to connect to your new base station so that you can administer it with the new Airport utility try this first: If the airport icon is displayed on your tool bar, click on it and select other. Enter your network name and password. With a little luck you will now be connected to your base station and it will be found by airport utility. If that doesn't work. Press the rest button on the back of the base station and hold it for at least one minute. That should completely rest your base station so that it is not encrypted. You should then be able to select it from the drop down menu when you click on the airport icon on the tool bar. Once you are connected, airport utility will find it.

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

"Airport Utility was unable to find your airport wireless device"

I recently bought an Airport Extreme to replace a D-Link DGL4300. My network is as follows: DSL > Modem > Airport Extreme > Ethernet and Wireless clients (wireless clients include my iMac and my wife's MacBook). This worked fine for about 2 weeks, until my wife's MacBook started having connectivity issues. I did a soft reset on the Airport Extreme, and . . . poof. No internet for anyone. I did a hard reset and used the saved profile that had previously worked (for at least my computer), and after the Airport Extreme restarted, I received the dreaded "Airport Utility was unable to find your airport wireless device". I have repeated this cycle several times with complete power-downs of the modem, the Airport Extreme and all clients, with no change in result.
What's odd is that even though Airport Utility can't find the Airport Extreme, my home network works fine (i.e., all clients can talk to an internal media server and each other), but there is no internet at all. Any ideas?

Alex Fisch wrote:
"Airport Utility was unable to find your airport wireless device"
Until you can complete the configuration process, try connecting your Mac to the AirPort Extreme with an Ethernet cable to see if that allows AirPort Utility to see the Extreme.

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Airport utility v6 doesn't see old airport extreme 1st ten

Similar Messages

Maybe you are looking for