Airport utility won't recognize express

I have an extreme set up as a base. it's working fine. I want to use the express to extend the range of the network. The utility on my primary computer won't recognize the express no matter what I do. I have reset every way possible and it just won't be recognized. I even have plugged it in right next to the base and it won't come up on utility. Thoughts?

I have the same problem. I have two MacBook Pros. I originally used my airport express as my base. Then I got an extreme and replaced that as a base. I have an external hard drive connected to the extreme. I have now tried tried to use the express to connect with my amplifier/receiver in a different room. I plan on playing music from my external hard drive through ITunes on my amplifier; however, my computer will not recognize the old express. I tried going into File and then Configure Other and then type 10.0.1.1 (which I saw in another post) but then I was still not able to update or get the express recognized.
I have a suspicion there is probably a pretty straighforward solution.
Thanks

Similar Messages

Windows - Airport Utility won't recognize Express plugged into Home stereo.

I am trying to set up the express to stream music to home stereo exclusively. I currently have a NETGEAR 108 Mbps (WGT624 v2) router set up on a Windows XP. Airport Utility won't recognize the device. Any ideas on how to make this thing work while keeping existing network? Thanks so much.

Let's double-check your AX's configure to receive audio via AirTunes.
Please reconnect the AX back to the Netgear before running the AirPort Utility.
Ok, compare your settings to the following within the AirPort Utility using Manual Setup:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Netgear's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx

Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better.

I just bought a new pc and My laptop can connect to it but my airport utility won't recognize it. Even though it does connect to the internet about every 15 minutes the internet shuts off.

I just bought a new pc and for our internet connection we have an airport express. My laptop can connect to it but my airport utility won't recognize it. Even though it does connect to the internet about every 15 minutes the internet shuts off. What should I do?

If you've not yet tried, unpower the AppleTV for a minute or so and restart - this occasionally corrects issues.
If not and the software update seems to have caused an issue, go to the Settings menu and choose to Restore it (this will erase all settings) to reapply current firmware.
Alternatively try to do so via iTunes:
If you see the "Connect to iTunes" screen on your Apple TV - Apple Support

New aebs and airport utility won't recognize my (2) airport express'

I have an new (n) aebs and can't get airtunes to work now. Only get flashing amber on the two ax and the new airport utility won't pull up the ax's, only the aebs. Have turned off ipv6 but no difference.

How are you connected? Meaning, how is the Mac
running the AirPort Utility attached to the new
AEBS(n) and the AX's? Your problem is likely that the
AX's are already named and configured to operate in
the old network, but your connection method doesn't
provide visibility to them...
Thank you for posting back to me. I finally got them to work and your explanation I thinks explains to me what happened. (I got them up and running just before I saw your reply.) I unplugged both of them and connected them via an ethernet cable to the new aebs and also did a hard restart for both. They then showed up with their alphanumeric titles, not the titles I had given them. Airport Utility recognized them after that. Hopefully my experience and your explanation will help others too. Thanks again.

Airport Utility won't recognize my new Airport Express

I see similar ports but don't understand the solution. Just bought an Airport Epxress to use for AirTunes from my MacAir notebook running Lion. Downloaded the right Airport Utility. After plugging in the AE, the amber light was solid then just flashed. The manual (pg 32) was no help. Airport Utility finally recognized the AE and I was able to configure it. The utility showed my my wireless network and asked me the WEP. I entered than and it said successful. Said window would stay open until AE restarted. Never did. I finally powered it off and on a couple of times. Airport Utility cannot find it now. Just continues to flash the amber on and off. The manual is kind of useless since it says to select the base station from the Airport Utility menu. I don't have anything to select.

How are you connected? Meaning, how is the Mac
running the AirPort Utility attached to the new
AEBS(n) and the AX's? Your problem is likely that the
AX's are already named and configured to operate in
the old network, but your connection method doesn't
provide visibility to them...
Thank you for posting back to me. I finally got them to work and your explanation I thinks explains to me what happened. (I got them up and running just before I saw your reply.) I unplugged both of them and connected them via an ethernet cable to the new aebs and also did a hard restart for both. They then showed up with their alphanumeric titles, not the titles I had given them. Airport Utility recognized them after that. Hopefully my experience and your explanation will help others too. Thanks again.

Airport Utility won't recognize second Airport Extreme

Hi.
My quite old 500GB Time Capsule is connected to my modem in bridge mode. I have a first A1264 Airport Express connected to the TC to extend the wireless to the living room, which works fine. For about a year, I had a second A1264 Airport Express in the kitchen, also in Extend mode. In September, the kitchen AEx stopped working, was flashing amber, and wasn't being recognized by Airport Utility. After many restarts and reboots, I gave in and ordered a new Airport Extreme, the new flat one. It worked fine for a few weeks and then this week, it hasn't been functioning properly and is doing the flashing amber light thing, and again, I can't see it on Airport Utility.
I brought it into the office, did a hard reset and connect it by ethernet to the TC. The TC reads it, examines base stations on my network and then says "An unexpected error occurred. Try again."
Can someone help me?

I have now solved this problem - my TC was too close to my modem and circuit breaker and the wifi was being distorted by it. I have moved the three elements apart and now everything works fine.
Ho hum.

Airport extreme setup. Airport express reset to factory settings. Light stays blinking amber. Utility won't recognize

AIrport extreme is setup. Airport express reset to factory settings. Light continues to blink amber. Utility will not recognize express to setup

Thanks. We understand that you want to use the Express to set up a separate wireless network with another modem, is that correct?
Unfortunately, we did not receive an answer to the questions that we asked above and have repeated again below regarding the AirPort Express and AirPort Utility. We asked these questions because not all versions of the AirPort Express are compatible with all versions of AirPort Utility.
What model of AirPort Express do you have? If you are not sure, please locate the model number on the side or bottom of the AirPort Express. It starts with an "A" followed by four numbers. It might be something like A1264 or A1392.
What version of AirPort Utility are you using? If you are not sure, please open AirPort Utility, click on the AirPort Utility menu in the upper left corner of the screen, and then click on About AirPort Utility.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

HT4628 Airport Utility doesn't recognize base station password

Help! Airport Utility doesn't recognize base station password; keeps asking repeatedly after entering correct one. Do I have to reset password now?

Disregard previous. I've resolved the problem on my own.

Airport Utility won't read my Airport Express?

Hi ..
My MacBook was working fine until i upgraded my Airport Utility to 5.3.2. Now it does not recognise my Airport express. So I lost the network. Also I tried to add my printer to the network and it failed. I don't know if the error is because of the upgrade or that I did something wrong with the settings please advise. Thanks

Abdul A. wrote:
Hi ..
My MacBook was working fine until i upgraded my Airport Utility to 5.3.2.
That's one of the programs I ran before my MacBook started getting flaky. I ended sending mine in for repair. They replaced hardware per last msg here
http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0&start=195
but who knows what software was changed? No matter: Working nice now and with a new keyboard and trackpad.
Phil

Airport Express and Airport Utility won't communicate

Hi,
I have this strange problem that whenever I setup the configurations for my Airport Express in Airport Utility I get an error message saying that the unit and it's network capabilities is temporarily uavailable. I get this message everytime and no matter what changes I whish to make.
Do anyone have any idea about what I should do?

This usually can happen if you have weak signal strength. What happens if the APX and your computer are close to each other?

Airport Utility won't work with Aiport Express A1084

I have an older Airport Express, model A1084. I'm running OS 10.9.2 and Airport Utilty 6.3.2 The Airport Utilty I have will not allow me to control the Airport Express I have so I cannot change wifi channels to improve interference problems from other wifi sources from neighbors. Older versions that should work cannot be installed because they aren't compatible with my current version OS 10.9.2. What can I do to fix this? Is Apple going to make available a new version of Airport Utilty that fixes this lock out problem?

Is Apple going to make available a new version of Airport Utilty that fixes this lock out problem?
We are all users here.....just like you....so no one here will be able to tell you what Apple may or may not do.
If you want an opinion.....AirPort Utility 6.x versions were introduced two years ago, and Apple has yet to change the utility to support older AirPorts....so my opinion would be that Apple will not ever change this.
The easiest solution is to use....or borrow for 10 minutes....another Mac that is running the Leopard or Snow Leopard operating system...or...a PC with AirPort Utility installed to administer the older AirPort.

Airport Utility won't see Aiport Express anymore

I have been streaming my iTunes to my Airport Express forever. Then, today, we bought a Time Capsule with the intent of that becoming our base station. All is good, except that Airport Utility will NOT see the Express anymore. I've unplugged, replugged, moved to another outlet, one that is 2 feet from the computer, nothing.
Is there something I am missing? How do I make this work?

The next step would be to reset the AX back to factory defaults.
Pull the AX from power for a few minutes
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 8-10 seconds
If you want to try to configure the AX by wireless, click on your AirPort icon and search for a network named something like Apple Network xxxxxx. It's easier and more reliable to use the ethernet cable if you have one handy.

Airport utility no longer recognizes my Airport Extreme Base Station, which had been set up to extend a wifi network

Hi. In November I set up my airport extreme base station (5th generation I believe) to wirelessly extend the wifi network we use at home to see if it would increase download speeds. Before doing that, I did a factory reset of my airport extreme, and the owner of the airport extreme to which the ethernet cable is attached made changes to his network to allow it to be extended. I folllowed all the directions from the apple support pages, and finally got it to work. I could even access a portable hard drive which I attached to the airport extreme base station being used as the extension. Then a week or so ago I noticed that my laptop would no longer connect to my base station. I did not have time to look into it until this week. Airport utility, either on my Mac or iphone no longer recognizes my base station. My mac is running OS X 10.10.1 and my iPhone is running iOS 8.1.2 I have tried both hard, soft and factory resets of my base station to no avail. The only thing that has changed after doing that, is that when I do a soft reset of my base station, a neighbors airport express appears when it never did before. I can't actually connect to it, but it does try. Then after approximately 5 minutes, it disappears from my list.
Today I went and pulled out my OLD AIRPORT EXTREME base station... you know, the one that looks like a space ship and is running wifi 802.1 b/c? airport utility DOES locate and display that, but airport utility returns a message stating that it cannot be set up by this software. I am attaching an image of that.
Thank you,
John
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?

I think the initial problem is that your iPhone was connected to an open network that wasn't yours.
Go to Settings > WiFi and "Forget" the network created by that AirPort Extreme, it's older than dirt. Forget your neighbor's network also.
Perform the equivalent actions with your Mac: System Preferences > Network > Wi-Fi > Advanced... Delete every network that appears, including your own.
Then, connect to your own network on all your devices, after which you ought to be able to use any of them and configure your Extreme without any difficulty. You may need to start over with a "hard reset" on both the main AirPort Extreme and the one extending its network.
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?
Not exactly, but using iCloud Keychain will populate all your devices with the names of preferred networks that any of them connect to, no matter where they are. I don't know why Apple considers that a beneficial feature.

Airport utility won't recognize express

Similar Messages

Maybe you are looking for