Airport Utility wont detect airport.

Windows is connecting to the base station but it wont connect to the internet. When I run Airport Utility it wont find the base station. OSX is connecting to the Base station and the internet with no problems. Help would be much appreciated.

got it fixed. instead of choosing "extend a wireless network" i configured on all the airports with "create a wireless network" with the same network name. also making sure that the channel is set at least three channels apart from the next basestation.
got it here:
http://discussions.apple.com/thread.jspa?messageID=7948207&#7948207

Similar Messages

Airport utility wont connect from my windows 8 pc to my airport extreme

my airport extreme is model number A1408 and I am using a windows 8 pc to try and use the Airport utility app to connect to my base station to port forward and ive done it before but now it wont detect my router even though im connected to the wifi from it and when i try to manualy connect it gives me error -6753 can anyone help me?

Figured it out. To print wirelessly via airport express 2nd generation you have to do some things. Download the bonjour printer thing mentioned above and have the printer plugged in to the airport express. Then run the bonjour printer thing and select your connected printer and install. Where I went wrong was I tried to print from my hp printer (1). When you install a printer with bonjour to print wirelessly it installs the same printer (2) so it's like there's 2 different printers in word or whatever you use to print. You have to select the one that says ready. Thanks for everyone's help

New Seagate Momentus 7200 Drive wont detect

I have tried to install a new momentus 7200 Seagate drive 200Gb ST9200420AS and my Macbook Pro 2.33 Core 2 Duo wont detect the new drive. The old drive works fine. I see there are jumpers on the drive but that does not seem to make any difference which way I put them. Is there something I am missing?
Booted up with OSX disk and ran disk utility but it only sees the superdrive and external disk I have plugged in for restore purposes.
Any ideas why this might happen.

Ok. I had the same problem. Macbook Pro didn't seem to want to recognize the drive during OS X install. Basically, you have to use the disk utilities to create a partition that the installer will recognize. Found this on a post from 2002 . . . .
"If you want the hard drive to be recognized as a startup drive, you must verify that the drive is formatted properly. Boot to the installer DVD, and open Disk Utility from the Utilities menu. Click on your drive (the device, and not your named partition), and choose the partition tab.
Click on the Options button, and click on GUID Partition table. Your MacBook Pro can't boot from an Apple Partition map. You can see the short description of each in that options window.
Oh, and then click OK, and click the Partition button. That will complete in a few seconds, and you can return to the installer, and you should then be able to continue with the install!"
Here is the link . . . thank you DeltaMac!! http://forums.macosxhints.com/showthread.php?t=76287
Todd

I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer.

Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter

So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
I have read / tried a ton of things:
re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
Reset the PRAM countless times
I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
I am running Mountain Lion with all the latest updates
New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
Here is the ebay link to the monitor
Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
So any sage words to make my day?

Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
then power on the monitor, and boom gloriousness
For future generations, setup that works:
1) MacBook Pro with Retina
2) Monitor From Korea (example auction)
3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor

Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

Upgrading to Windows vista means itunes wont detect my ipod?? Help please.

Recently upgraded to windows Vista. Big whopdeedo.
But anyway, when I plug my ipod in, windows tries to update drivers for it, but of course failas horribly.
However, this is having a knock on effect that means itunes wont detect my ipod. So, while my ipod recharges, I cannot sync it. Thus I can't add new songs and what-not.
Please help.

Yes my ipod is jailbroken, but this has never proved an issue before.
Its not just itunes that now wont recognise my ipod, my other software wont either, and they used to work with the jailbroken ipod.
This all started after i synced a nano, then connected my ipod and a screen came up saying ipod camera connected.
I click on the camera icon in mycomputer and properties tab then selected take no action in the events tab.
This hasnt resolved my issue, and the ipod still comes up as a camera in mycomputer, the only difference being im now not prompted to choose a program to view my photos with.
This is really getting up my nose, as for the second poster, sorry that article was no help at all.
Please someone help me

I have a dvd in my macbook and cannot eject it. the issue is it wont detect it. i cant find the dvd in finder. what do i do?

i have a dvd in my macbook and cannot eject it. the issue is it wont detect it. i cant find the dvd in finder. what do i do?

Dear Mary,
Good Day...
Restart the macBook holding down the mouse button of your trackpad.......
Good Luck....
Regards
IK

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

WD Elements External Hard drive wont detect on my MBP anymore. HELP!!

I was desperate to transfer my files from my WD external drive to my MBP but to no avail. So I searched online and found MacFuse and NTFS-3G. So I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well.
The Culprit of all this is when I install MacFue & NTFS-3G
So I am stuck, any help would be highly appreciated.

Remove MacFuse and NTFS3G. remove them correctly, get the directions from the vendor(s). Don't put it back
Do you have any backups or are you winging it?

I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

Is the display turned on? Sometimes it is the simplest of solutions, when details are missing.

I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

http://support.apple.com/kb/TS1538

TS1363 itunes will not update on my computer and now wont detect my ipod. it says i have to contact an addministrator. what do i do?

itunes will not update on my computer and now wont detect my ipod. it says i have to contact an addministrator. what do i do?

Hi enp518,
Welcome to Apple Support Communities.
We have some information in this article that may be helpful:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visit support.microsoft.com for more information.
Best,
Jeremy

My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

Place the device in DFU mode and restore.

Airport Utility wont detect airport.

Similar Messages

Maybe you are looking for