Airport via routed network

How do you use an airport through a routed network.? I would like to stream to my airport express that sits on another subnet in my house.
Anyone have any ideas on how to manually add airports in Itunes.?

Is the airport using apple talk to connect to Itunes or IP.? Apple talk is not a routed protocol in most environments and it is in mine so that makes sense on why I can only see the AE's in Itunes. But is there another way to use IP.?

Similar Messages

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

How do I connect a PC via ethernet to my new Airport Extreme router?

I just replaced an old Actiontec router with a new Apple Airport Extreme router to work with my Verizon FIOS service. Connection to all Apple products via ethernet or wireless works OK, however I cannot get the PC up and running via its ethernet connection to the Airport Extreme. Any help would be much appreciated.

If your other devices are working then it is probably the PC's IP configuration.
First, make sure that the PC is actually connected to the Extreme by verifying the lights are on at the Ethernet ports on the PC and the Extreme.
If you are using DHCP to manage the IP addresses then make sure that the PC is configured to "Obtain IP Address Automatically" for both IP versions 4 and 6.
When I replaced my Linksys w/ an Extreme I forgot that I had a couple devices configured with static (manual) IPs. My old one used the "192.168.1.nn" and my Extreme defaulted to "10.0.1.nn". Once i converted all the static IPs to the correct subnet then all was good.

My iPod Touch was not connecting to my Airport Express router (which was "extending" a network as a WDS repeater) -- SOLVED!

My problem was this. I have a large apartment with concrete walls, so just one wireless router would not work. I used apple Airport routers and used one of them (an airport extreme) to create my wireless network, and a number of other ones -- airport expresses -- to "extend" the network.
That's all great, but I found that a couple of my devices -- mainly my iPod Touch -- would refuse to connect to the repeater airport express routers -- it only wanted to connect to the main Airport Extreme router, not the satellite guys.
Finally I solved the problem. It had to do with how the wireless network's configuration for "Radio" setting was set regarding 802/11 b/g, and the dual-band ability of the Extreme. Below is the description of how I fixed it.
======SOLUTION THAT I POSTED======
I've pretty much solved this problem. I do not FULLY understand why, but now I can have my iPod touch (and I am hoping my kindle) attach correctly to the satellite/repeater airport express. Here is what I did:
I did two configuration changes to my central hub airport extreme router (i.e., the one that my other routers were merely configured to "extend.") I realize now that these are both configurations that must be done at that central router, and the repeater routers then simply mimic or reflect accordingly.
-- First, I used the most recent Airport Utility (v6.0) and clicked on my main router (which, crucially, is an airport extreme that has dual band 802.11, both 2.4ghz and 5ghz.)
-- In the airport utility, I clicked on that Extreme router and then in its funky popup window, clicked Edit.
-- Clicked the tab called Wireless.
-- Clicked on Wireless Options button.
-- the first config change I made on that page was to change the Radio Mode setting to "802.11a/n - 802.11 b/g."
What nobody really tells you is that that hyphenated choice means that the 5GHz band will use the first of those two (namely, a and n, in other words the strong modern N standard will be used on this band ONLY) ... while the 2.4GHZ band will use only the second of those two, b/g, in other words, the devices that only can use that older weaker standard.
So, it's kind of a segregation. I'm telling it "No, don't let the 2.4 ghz band try to handle traffic using N. That band will just take care of the old crappy clients."
-- the second config change that I made on that page was to check the check box to make a totally separate wireless network name for the 5GHZ band. Further segregating things. When I tried my solution without this additional step, my problem did not fix itself, though I don't fully see why.
As I said, a few questions remain in my head, but the darn thing works, so I'm happy. Among many other questions... are those airport expresses dual-band too? I didn't think they were but somehow they are repeating this dual-band strategy? Whatever. it works.
BY THE WAY -- I recommend using the Apple question/answer board on StackExchange to get Apple-related answers. It is at http://apple.stackexchange.com/

To demonstrate, here's a screenshot from the Airport Utility on the iPod Touch in close proximity to the Express, still connected to the Extreme :

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

HT4145 Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

I assume that all of your WAPs are hard wired on the network.
If.....all of your WAPs are simultaneous dual band Apple AirPort devices like an AirPort Extreme or new AirPort Express.....and.....you have firmware version 7.6.3 (now 7.6.4) installed on all the AirPorts.....and.....you use AirPort Utility 6.3.1 to configure the devices......in theory.....it should work.
I don't have 6 WAPs, but I do have 3 and the network works perfectly allowing extension of both the "main" and "guest" network.

I want to connect a Windows PC to an existing Airport Extreme router via ethernet connection. Is there any utility required or can I just plug into the router?

I want to connect a Windows PC to an existing Airport Extreme router via ethernet connection. Is there any utility required or can I just plug into the router? The router is already set up and working with existing iMacs.

thanks for the info. I found apple utilty software on this windows 7 PC but I guess it is not required for sharing internet on exisiting apple extreme. Am I correct that I can remove this apple software?

Connecting to a pc from my mac via airport express wireless network

I have successfully been able to access my mac from my Windows XP machine via my AE wireless network that I set up with my Mac. However, I am unable to do the reverse. I.e. connect to my PC from my Mac.
There seem to be two issues I need to figure out to make this work:
1. Firstly, the option to allow sharing for any of my Windows folders has been restricted because apparently I need to create a network first but I have a network and both the PC and Mac can access the internet, share a printer and see each other via this network so I don't understand what's wrong. Do I have to create a network from the pc side of things as well in order for this to work?
2. When I attempt to connect to the pc from my mac I do the following from Finder: GO >> "Connect to Server" then I type in smb://<ip address of the pc>. When the dialogue comes up asking for "Workgroup/Domain", "Name" and "Password" comes up I know I have the correct workgroup and I know the pc is there because it's full name is displayed but I'm not sure what to enter as "Name" and "Password". I assumed it was the username and password for the windows user on the pc whose files/folders I want to access but then I'm told the connection can't be made because the name or password isn't correct. I tried every user name and password I could think of in these fields--even the accounts for my mac--but they all give me the same response.
I'd appreciate it if someone could someone lend a hand.
Joey

Sorry, I don't know which articles you have already reviewed.
Sharing folders on the PC should be nothing more than enabling "File and Printer Sharing for Microsoft Networks" option under Network options & then identifying which folders you want to share.
Other references to try:
- http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1164.html
- http://docs.info.apple.com/article.html?artnum=106471
- http://docs.info.apple.com/article.html?artnum=19652

Router network is DHCP but airport keeps insisting I have to find a PPPoE

Used to have internet svc on Macbook then it started dropping and now we can't connect. Airport sees my network but won't let me access. Changed to DHCP but Airport continues to look for a PPPoE To OK changes, I need an administrator name and password which the macbook is not accepting. Aaargh

Hello maralyn J. Welcome to the Apple Discussions!
Is your current Internet service DSL? If so, does your ISP require PPPoE (username/password) for establishing a connection to their service? What is the make/model of your DSL/Cable modem? Finally, what is your current network configuration with the 802.11n AirPort Extreme Base Station (AEBSn)? That is, does it look something like the following?
DSL/Cable modem > (Ethernet cable) > (WAN port) AEBSn > (wireless) > MacBook

Can't make Airport Extreme router work with non-Apple device

I am trying to help a friend who has a PC (Windows 7) that has a wired Ethernet connection to his girlfriend's Airport Extreme router. He wants his Internet-capable Blu-Ray player and her IPad to wirelessly access the Internet via the Aiport Extreme router, with both the Blu-Ray player and the IPad's Internet access protected by WPA-2 encryption (both devices are capable of WPA-2). How do I do this?
Here are the problems we've run into:
1) The Airport Utility for Windows (5.6.1) has been installed on the P.C., and we've used it to update the firmware on the Airport Extreme router. However, after we followed the Aiport Utility instructions to set up the network, all the router wanted to do was look for an Apple device. His girlfriend and her IPad are out-of-town right now, so the only device within range was the Blu-Ray player, and the router did not see it. Not only that, but almost all the menu options on the Airport Utility were "greyed out" (unusable), except for "Configuration." I am very troubled by the fact that the Airport Extreme router seems to want to look only for Apple devices.
2) In order to get Internet access for his Blu-Ray player for the time being, my friend pushed the "reset" button on the Airport Extreme router, and he can now use his Blu-Ray player for Netflix and other Internet streaming options. However, the Blu-Ray's wireless Internet access is an unencrypted connection, and the Airport Extreme router is displaying a flashing amber light -- not a good situation.
3) Although I know his girlfriend could access the router via her IPad when she returns, she is French-Canadian, and her IPad operates in French. I happen to know some French, but I have enough trouble trying to understand wireless networking terminology in English without having to try to figure out the equivalent terms in French. Thankfully, the Airport Utility for Windows on his P.C. is in English, so that's what we've got to use to solve this problem.
I have profound respect for Apple products, but I'm a Windows/Linkysis router guy, so that's why I'm stumped. Can anybody out there help me?

Which model of the AirPort Extreme Base Station (AEBS) do they have? What is the version of firmware that you updated it to?
By default, the AEBS will broadcast an unsecured Wi-Fi network with a network name (or SSID) of something like Apple Network NNNNNN. This would be similar to a Linksys when first powered-up.

Why doesn't my airport express router issue proper DNS server address to DHCP clients?

I have an Airport express router (version 7.6.4). It was configured to connect to internet via a cable modem, acting as a router with NAT. This means it obtians WAN address from cable modem, and in LAN it assumes IP address 10.0.1.1 as a gateway, and issue IP address to my 4-5 wireless clients (MBA, iPads, PCs) vi DHCP.
However I recently encounter an issue, that the router no longer issues DNS server address obtained from Cable Modem(206.x.x.x) but instead tell every DHCP client to use router ip address (10.0.1.1) as DNS server. I was pretty sure before Dec 2013 it is issueing (206.x.x.x) to all DHCP clients.
Apparently now the Airport express is acting as a DNS server or as a DNS cache. This works sporadically and very often result in long DNS look up or DNS look up failure.
Is this a bug or is it supposed to do so? Any configuration can turn it off so Airport express will issue Cable modem obtained DNS server to DHCP clients?
My network otherwise works fine. for some of the Clients (e.g. one MBA) I configured DNS for it mannually and it's internet is working very smoothly.

But this will be a problem for my ipad and iphone that uses wifi.
These devices either allow full DHCP. If you need to mannually enter DNS server, you will need to turn entire IP configuration to mannual and that will be a problem for me.

I enabled the guest network feature on my time capsule. Can I configure my airport extremes guest network feature if I use this as a network extender using a "roaming" network?

I enabled the guest network feature on my TC. Can I configure my airport extremes guest network feature if I use the extreme as a network extender connecting my Airport Extreme to my TC via ethernet cable?

Unfortunately no, since the AirPort Extreme should be configured in Bridge Mode if it is connecting to the Time Capsule using an Ethernet connection.
The Guest Network option cannot be enabled when the AirPort is configured in Bridge Mode.
Another way of saying the same thing is that the Guest Network cannot be "extended" either by using an Ethernet connection or wireless. It is only available from the Time Capsule "main" wireless router on your network, not any extending devices.

Ethernet Connection Randomly Dropping w/ AirPort Extreme Router

My wired ethernet connection drops sometimes randomly, but I think it tends to do it more if I'm in an audio chat with someone on iChat (not sure). Here is my setup:
FiOS ISP (always been reliable in the past) -> AirPort Extreme (router) -> Cisco gig-e switch (reliable) -> 2008 Mac Pro running Snow Leopard (no I do not use wifi) (my computer) -> Internet sharing to my brother's computer via ethernet port 2 (set up after the new router was installed, but problem happened without it)
It seemed to start doing this once I switched the router to AirPort Extreme. We were using the one Verizon gave us, a junky Actiontec router that was messing with our DNS and port forwardings but wasn't dropping my computer's connection randomly.
I have it set to use DHCP. When it drops, other things have connection, just not my computer. It drops for about 30 seconds then comes up. I've already tried rebooting the router and the switch. I suspect that something is funny with the DHCP because I rarely get the message that my computer's name has already been taken (by itself!), which has always happened even with the old router. Nothing is stealing my address. Anything else I should try?

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

Airport Extreme Route - Logging into remote computer using VPN

is there anything i need to change on my airport extreme router. I used to be able to access remote computer via vpn and now I cant ever since i started using the airport extreme. Im trying to access remote computer using windows xp home.

bkohlmeier wrote:
On one of the 2wire config screens last night, it showed my various devices and next to each one said "IP" of 108.54.... so it was showing the public IP of each one, versus say "192.168.1.160".
Ok, that is weird. Is each IP different and how many devices do you have getting public IP's.. there should only be one available and the only device getting it should be the extreme.
If you only need a bridged modem. go out and buy a cheap single port modem. (I presume this is DSL service. Sorry I am not in US, so what is obvious to you may need spelling out).
We often use the cheapest TP-Link modem here.. TD-8817 which are like $25 for bridged modem.. works really well.
I think also you will find as far as pc is concerned the 2wire is actually the better router. Apple decided to use NAT-PMP on their routers instead of near universal upnp used by all windows networking and just about everything else. That makes opening ports that much harder on the Extreme for games etc.
With the new version utility you can turn on guest network even with the Extreme in bridge.. and what you miss in terms of dhcp is not that great.
If you want to get it working, let me suggest bridging the extreme for the moment. I am sure you will find no issues with Remote Desktop direct through the 2wire, as you probably used it in the past that way.

Can I access my external harddrive if I connect it to my Airport via USB?

I have a basic router providing a wireless network and access to the internet (given by my internet provider). And then I recently bought an Airport adaptor and connected my stereo, and now I'm playing music wirelessly.
My question is then, will I be able to access my external harddrive if I connect it to my Airport via USB?
It's an Airport Express Base Station (the one with only jack, usb and ethernet)
Thanks

Sorry but the USB port on the AirPort Express (AX) does not support USB hard drives.

Airport via routed network

Similar Messages

Maybe you are looking for