AIRPORT vs. All Others? YOU CHOOSE!

Hi Guys,
Thanks for taking the time to read this and for your help. I appreciate it.
I am finally going to make the move to a wireless connection. I truly need to maintain my speed, and security.
I have a G5, and a G4 - 400.
I wanted to know which wireless routers you all would vote on, if you had to purchase one.
Here's the conditions.
3 year old, 3 level home. Small. Main computer (G5) will be in basement (1st level, - need to get air port card.) Family computer (G4 - 400) on 3rd level (has air port card). Both computers are near stairway which connects all levels. Computers are no more than 15 feet away from stairway. Would like to use computer in back yard, but this is not a priority to me. Main priority is to allow both computers to use iSight for video conferencing and 30MB+ file sharing.
I was thinking about using an airport with an omni antenna. However I've seen other wireless routers out there with a larger coverage than apple's.
What would you choose and why? Budget limit is $300. Will purchase from ebay if need be.
Thanks
PS> Don't throw tomatoes at me... I am a newbie to wireless, but a pro at the mac.

The WRT54G is currently the standard by which all commerical wireless routers are judged. It generally gives the best range and speed. It supports WPA (a very secure encryption method), and many 3rd party "signal boosters", such as high-gain antennas, access points (AP), and the like. It's also very affordable. Most wireless routers are.
I would set up the network like this, but it might be too difficult for some. There are two ways I would do it.
I would have the router in the 2nd floor, in a central location. I would run an ethernet cable down into the 1st floor and hardwire the G5. Then I'd let the G4 run wirelessly. The other option is to get a regular hard-wired router and put that in the 1st floor. Then run an ethernet cable up to the 2nd floor and set up a wireless AP somewhere on the 2nd or 3rd floor.
The advantages of the first option are that you have less hardware to get. The advantages of the second are that you can get several APs that will act as a web of sorts and blanket a far wider area with coverage, and make it much more reliable too (example, Linksys WAP54G).
So there you go. I always suggest hardwiring computers whenever possible, and use wireless as a novelty. Ethernet is a fail-safe, as it will always work. Wireless is not always suited to every environment.

Similar Messages

  • Can't find airport but all other computers do?

    This is very similiar to a previous posting but no one has answered or given a solution.
    Louis Jan, "I cannot access the Internet & the base station is working!", 07:31pm Aug 6, 2005 CDT
    I have a wireless airport network in my home and I have three Mac's. One is a G4 PowerMac connected directly to the basestation and it works great. A G4 Laptop and is connected wireless and works great all the time. I have a iMac G4 that uses an airport card and it "use" to work all the time and now won't connect to the airport network.
    I have reset just about everything and it is set up exactly like my laptop. I can sometimes restart it and get it will work for about 5-10 minutes and then it loses connection or it won't connect right from the start. I have also noticed that when this happens the system starts getting "clunky" and if I move my mouse down to the doc, the icons move slow or kind of clunky as well as opening folders.
    The signal is great all the time and it shows everything should be in order but when I open Safari or any browser, I get a "server can not be found" message.
    Help. I have reinstalled the system software, permissions, etc. Nothing seems to work.

    Your problems are not at all similar to the discussion you quoted. In that discussion, the problem was with the Base Station (despite the choice of discussion title). On the other hand, you have a Base Station that not only works but also has a known working wireless interface, since another Mac can connect to it wirelessly without difficulty.
    First thing to try - open up the problematic iMac and (a) pull out and reseat the Airport card as well as (b) pull out and reseat (FULLY) the Airport antenna cable connection to the card.
    If this fails to solve the problem, my suspicion would be that you have a marginally defective Airport card inside this iMac. The only way to test it is to substitute it with a known working Airport card.

  • IMac suddenly can't detect airport express; all other devices can -help!

    Literally overnight and with no changes in settings, etc. my iMac (running the latest version of Tiger) will not detect airport express. My laptop still detects it and connects just fine; my iphone connects via wifi, etc. It's just the iMac that isn't working.
    Upon starting up my iMac this morning, I was prompted to "update airport firmware" which I did. Ever since then I can't get the computer to recognize airport.
    I've worked on it for 2 hours disconnecting and resetting the modem; checking and unchecking boxes in the network settings, trying to renew the dhcp lease, etc. When I scan for wireless devices, the iMac does not detect one. If it does detect it, I get an "there was an error connecting" message.
    So frustrating, especially since I have used this in the same way for over two years and have had NO problems until this morning.
    The airport express has a solid green light. Any help is much appreciated!! Thank you.

    Hi guys, its me again....
    Dunno if is the same problem, but i dont think the problem is the airport, all of you (as i did too) tried making new users, deleting preferences, etc etc...
    I tried resetting the airport, and is the same, is something in the computer that trigger the issue after the firmware in the airport, dunno how, but as far i saw, its the problem...
    At least for me, after lost the connection, my airport on-off button stop working, if i turn off the airport in the upper menu or in the network preference panel, go off of course, but if i try to turn it on again, desnt work anymore, the button works of course, but never change to ON state...
    that button issue isnt a hardware airport issue, is a OS issue...
    :S
    P.D.: i've trying to replicate some situations on the computer, programs, task etc, bcuz' by some reason there's something that trigger the desconnection... by example, right now i've more than 4 o 5 hours without the problem yet.... but.... i've using none or unusual programs to make the regular tasks...
    And last night, i leave the computer connected to internet the whole night, no user interference and was online all the time...
    something is the trigger..
    Message was edited by: daniac
    Message was edited by: daniac

  • Can you fix , the fact that If you leave the firefox update window open for a long period (say 20 minutes in the background), then close all other windowns, then choose to install, it uses this extra time to estimate the download?

    Can you fix , the fact that If you leave the firefox UPDATE window open for a long period (say 20 minutes in the background), then close all other windows, then choose to download update, it uses this extra time to estimate the download? (Mine said, 12 Hours to start with, but took under 2 minutes!)
    == This happened ==
    Not sure how often
    == When you install update to 3.6.4 (Possibly for every update?)

    The download should happen in the background (before you get an update window). I wonder why that didn't happen for you...\
    Did you manually check for updates?

  • When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    Hi,
    I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
    Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
    Latest version of Adobe Reader:- http://get.adobe.com/reader/
    If you still experience the same issue, please share the following information:-
    - Screenshot of Adobe Reader showing printer options
    - Screenshot of Microsoft Word showing printer options
    - Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
    Regards,
    Nakul 

  • Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version.  All other files open w/o a problem.  Please help.

    Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version.  All other files in words open w/o a problem.  Please help.
    Thank you.
    <Email Edited by Host>

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Peter

  • I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

    I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded.  Help - thank you

    Could you share a link to the page?
    Seeing it in context and in our browsers is much easier to debug.
    If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

  • Is the website myfitnesspal no longer compatible with you? It won't allow me to log in but works with ALL other browsers. I've done troubleshoot. Didn't work.

    Yesterday I had problems with the website Myfitnesspal.com. I have a tab set to automatically open when I start the browser every day. I could not log any information into the site, so I tried a log off and log on. It won't let me log on to the site. I contacted, myfitnesspal and we worked through many trouble shooting steps. I also tried all the troubleshooting steps from your site. I even did a complete shutdown and start up of my computer. Nothing has fixed this problem. I had the same issue with a couple of store I like to browse. The store site are finally working after more than 6 months of frustration. Myfitnesspal works on ALL other browsers. So with everything that has been tried and done, the problem seems to be on your end somewhere. I am running Windows 7 Professional, 32 bit.
    I really hope that this can be fixed because the website displays best on your browser. Should you have any questions, please don't hesitate to email me.
    Thank you for anything you can do to fix this and for your time.

    Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
    During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

    How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
    Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
    All other screen functions work normally.

    Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

  • Just bought a new printer ( Canonpixmaip4920) all other files print ok but when I print a I Tunes cover playlist in comes out backwards or mirror image? How do you fix this?

    Hi,
    I just bought a new canon pixma ip 4920 printer... all other files print ok except when I try to print a playlist from I tunes it prints out backwards or a mirror image? How do you fix this?
    Jim

    Unfortunately changing the epub text size does not change the view at all. The images do not seem to change when the text size setting is changed.
    The resolution of my machine is already at the max setting, so increasing the resolution is kind of impossible.
    Any other suggestions I could try?  Thank you for your suggestions!

  • The airport only finds other networks than the home network I have used before.  Doesn' help to try to manually add/find this network, it simply doesn't come up.  All other networks in the neighborhood are found though. Doesn't help to reboot either

    The airport only finds other networks.  Not the home network which I have used before.
    It doesn't help to search for new networks, try to manually search or add the network.  Doesn't
    help to turn off/on the airport or even the mac.  Doesn't help to reboot the home network - which is
    found and connected on the iPhone and iPad. (and network speed is good enough for many devices).
    The network just doesn't come up on the list of available networks.
    No chance to update software, since got no internet.

    I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

  • I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

    I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

    How are you trying to play them, in the iTunes store or the Music and Videos apps ? Downloaded and synced music and videos should be in the Music and Videos apps, and you can stop content that is only in the cloud from showing in them via Settings > iTunes & App Store > Music and Videos 'off' (under the 'show all' heading).
    If you don't have your music and films/TV shows in those two apps then you should be able to download them into those apps via the Purchased tab in the iTunes store app.

  • I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

    Question
    I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
    Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
    If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

  • Can you cross platforms on the 4S? My itunes is on MAC, all other info is on PC

    Can you cross platforms on the 4S? My itunes is on MAC, all other info is on PC

    Yes, you can sync iTunes content with one computer, & contacts & calendars with another computer.

Maybe you are looking for

  • Error in Sneak Preview BI JAVA SP9  instalation

    Hi All, I am getting following kid of error when try to install Sneak preview BI JAVA SP 9 version. INFO 2007-10-16 08:15:58 Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_inst

  • Replace D-link router with Time Capsule

    Hi there, I have a MacBook Pro and i am using wireless internet access via an old D-link router (in-buit modem). I want to replace this with my new Time Capsule unit, not sure if I need a separate DSL/Cable modem? Please advise... thanks very much in

  • Need help with sql query dates

    Hi, I have a sql query where i need to extract some info between given dates. The where clause of this query is as follows: WHERE CPD_BUS_UNIT=:ESI_PRM_1 AND CPD_VOUCHER_DATE >= :P_DATE_FROM AND CPD_VOUCHER_DATE < (:P_DATE_TO+1) When i execute the qu

  • Logic 9.0.2 with SL wont start!!

    Please help, I just installed snow leopard ran the updates which downloaded Logic 9.0.2. Now when I start logic the splash screen comes up, it starts loading but then freezes at "Initializing Loop Browser" Any ideas? Thanks!

  • Java Security... FRM-92100 Error

    Here is the error. Only 3 out of 24 machines are getting the error. The other 21 are able to select the button(s) and access reports and/or pics. FRM-92100: Your connection to the Server was interrupted. This may be the result of a network error, or