Airport Wireless error message,

I keep getting this error message: "Invalid Password" I just bought the new macbook and this is my first macbook. So I don't know what I am doing wrong or if I should be doing something different? Thanks~

You will need to provide more information. Whose wireless network are trying to connect to? What type of security does the network use? Have you even entered a password? What type of wireless router is used by this network? Have you configured the Network preferences for your Airport wireless port?
Before posting answers first check your computer's user manual for any information on how to set up for a wireless network. Next select Mac Help from the Finder's Help menu and search for "wireless" and "airport" which should return several help articles you can read that may help you with the problem. Then round up answers for all of my questions and be sure to post the answers for each.

Similar Messages

Airport express error message

Trying to add Airport Express to extend Airport Extreme. Can not open Express in Utilities --error message: -6753 "an error occured while trying to access the wireless device..." What does that error message indicate?

Did some research and tried a firmware update on my airport extreme, which solved the problem.

HP officejet 6500 wireless: error message- General Printer Error, 0x610 11beb ?

How can I fix this as I cannot scan, print, etc. there are no paper jams, changed ink catridges etc. Help

Cannot get carrage to stop to take out cartridges, and printer will not reset to print. Error message just keeps on coming up. Also, solution center printer is disconnected. Tried to reset the wireless connection, but it won't let me. Error message keeps showing up. Tried unplugging and sit for a couple of minutes, but still won't work?

Airport Extreme Error message

Hi!
I recently bought a macbook and the airport extreme base station so I could have a wireless connection in my home. I have hooked it up to my PC and it has a solid green light on it, yet I can do nothing else with it. It just reads "an error occured while trying to access the base station. Make sure your network connection is valid and try again." everytime. How can I get this issue resolved? I have no ideas....

Hello, TinaKier.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an error when setting up your AirPort Extreme. Here is a troubleshooting article that I would recommend going through for this error.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Cheers,
Jason H.

When attempting to print with HP P2015 cabled to AirPort Extreme, error message is "Network host (name) is busy". What's happening?

When attempting to print with an HP P2015 cabled to an AirPort Extreme, the network won't connect to printer. The Print Que message is "Network host (name) is busy; will retry in (number) seconds." When I delete the file to be printed, the Print Queue screen says "Printer Ready".
More Information:
The printer's Queue Name is Hewlett-Packard HP LaserJet P2015 Series
The Location is "(my name) AirPort Extreme"
URL is "Hewlett_Packard%20%HP%20LaserJet%20P2015%20Series._pdl-datastream._tcp.local./ ?bidi" (for whatever that means)
Driver Version is 18.4
Printer Software is HP LaserJet P2015 Series
The printer is listed as a printer on System Preferences/Print&Fax screen
If I connect the printer cable directly to the iMac, the printer works fine.
Any helpful directions would be greatly appreciated.

I came across an Apple article last modified 6/2/08 (Printer troubleshooting for AirPort Base Stations and Time Capsule). It suggested the old standby, i.e., disconnect the AirPort Extreme Base Station from its power source, turn off the printer, turn on the printer, and reconnect the AirPort to its power source. It worked. I guess disconnecting the AirPort cleared out the network host. Yea.

Installing HP Deskjet 3510 Wireless Error Message

I just purchased my HP Deskjet 3510 Wireless Printer today and I'm trying to install it on my Macbook so it will print wirelessly without the USB. I'm getting the follwing error messege and wondering how I can fix this? Any help?

The only way around it is to use Wireless Direct, but you will have to switch among the different wireless networks with your Mac.
Follow steps one below to enable Wireless Direct for the printer (which will act like a router):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03382115&cc=us&dlc=en&lc=en &product=5157483&tmp_track_link=ot_search
Next click the Wifi icon on your Mac, select Show Networks,
Click on Joind other network and connect to the wireless direct connection,
Hope that may help,
Shlomi

Continually getting airport express error message

I keep getting an "unexpected error" when setting up my new airport express. The set-up seems to go smoothly but when the express needs to reboot, it always ends in error. I have tried it with both my new comp (mountain lion) and old (leopard). Does anyone have a helpful tidbit?

Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
* [[Secure Connection Failed]]

Airport utility was unable to find any airport wireless device

Installed Airport Extreme connected to my PC running XP Pro. Configured my wireless network successfully. Updated to Aiport Utility for Windows ver 5.5.2 and the Airport Utility shows the 'unable to find an Airport wireless device' message and the 'Rescan' button. I uninstalled the upgraded Utility software, unplugged the Airport Extreme, installed the original software from the supplied disc, held down the reset button while plugging the power back in and waited till I got the amber/green fast flashing lights at which time I released the reset button. No change. Then upgraded the Airport Utility back to 5.5.2 and still no change. I can connect to the web from my PC and to an open wireless network named Apple Network f9561d.
Any help getting access to my Airport Extreme greatly appreciated. Thx

PC was/is always directly connected to Airport Extreme via ethernet. Windows XP Pro firewall always has been disabled (double checked). No firewall software. Disabled PC Tools malware protector. No virus protection or scanning software.
Only things showing in toolbar are NVidia Settings, Windows Volume Control, Network Connection icon,Safely Remove Hardware Icon and the time.
Don't have anything running that would block any ports.
Airport Utility for Windows is version 5.5.2.
Did another factory(?) reset as described before and pressed 'Rescan' button 15 times with no change. Devices connected via wireless are Nexus smartphone & HP laptop running Vista. All can access Internet, but slowly.
Tried rebooting PC several times with no difference. Tried plugging the PC ethernet cable into different ports in the Airport Extreme before I realized that I could always access the Internet from the PC so I was wasting my time : )
Tonite I unhooked my DLink wireless router, hooked up the Airport Extreme, installed the software, configured the network (perfectly) and then checked for and installed the
Airport Utility software upgrade (no others). As soon as it finished installing, I ran it and ended up with the error. I didn't install anything else or even run any other software. I saved the configuration, checked for and installed the upgrade. I haven't changed ANY settings on the PC or run any software other than Firefox to create my Apple account to report this problem.
Any help greatly appreciated.

I just upgraded to ITunes version 10.6.0.40 and now I am having trouble connecting to my Airport Express. I get error message 15000. I am connecting with an ethernet cable so it is not a wireless problem. Any ideas?

I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000. Does anyone know what that means? I am using an ethernet cable so it is not a wireless problem. Trying to find out if this is realated to the iTunes upgrade. Any ideas out there?

Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728

I'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1

'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1

Is your AirPort Express an older 802.11g model? If so, you will need to install v5.6 if you are running OS X Lion or 5.6.1 if running OS X Leopard or Snow Leopard. Unfortunately, the iOS version of the AirPort Utility cannot administer these older base stations.

Error message when trying to configure airport extremesure wireless device

Airport Utility can't configure my airport extreme. I keep getting error message "error occurred...make sure...connected via ethernet and try again (-6765)". I've tried everything, hard reset, etc. Very frustrated.

Try to "find" and configure the router with ethernet first. Set the wireless configuration and check for telling light. Then disconnect the ethernet, see what happens.

Error message when trying to setup Airport Extreme Unit - Please Help

I have never tried to set an Airport Extreme, but expected it to be relatively simple.....
I have been given an Airport Extreme unit (model A1143 - 802.11n) to use to set up a wireless network in my home. I am using the airport utility app to try and set this up but recieve the following error message:
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I have downloaded the latest version of airport utility 6.3.1 as the old version would not install, but still i cannot get past the error message.
I am running a Macbook with OS X Lion 10.7.5 on it.
Could anyone help me with this issue and assist in getting me setup.
Thanks
Stuart

Unfortunately, things like this can happen when you try to use current software on a 6 year old product.
The solution is exactly as the message states:
You will need to use AirPort Utility 5.6 to update the firmware on the AirPort Extreme.
AirPort Utility 5.6 can be installed on a Mac running Leopard (10.5.x) or Snow Leopard (10.6.x) or a PC. If you do not have access to one of these devices, you might be able to take the AirPort Extreme to an Apple Store to have them update the firmware for you.
Once the firmware on the AirPort Extreme has been updated......then..... it will be possible to administer the AirPort Extreme using AirPort Utility 6.3.1.

Windows 8.1 and most recent version of Airport Utility. Error message 6722 during connection.

New computer with Windows 8.1. I have downloaded most recent version of the Airport Utility. The utility finds by airport express but during connection I get error message -6722. I suspect Windows 8.1 is not compatible with my first generation Airport Express but before I buy a new one would like to know for sure.

More compatible than v2 of the Express which you cannot configure from windows.. all the later airport routers need v6 utility to configure them.. and this is not available for windows.
These issues arise due to all sorts of things.. the error message is very unclear in its meaning.
Plug the Express into the computer by ethernet. Do a factory reset on the Express and see if you can set it up by ethernet.
Wireless products can be a problem. Set the Express to fixed channel, 11, 6, 1 in that order.. with no security and a simply name, for both the express and wireless. No spaces and pure alphanumeric.
If the computer cannot connect under the most ideal situation nothing else will fix it.
If you have an ipad iphone with iOS v6 or later then you can use the apple version Airport utility which is much more likely to work than windows.

ITunes on Windows Vista PC can't connect to AirPort Express. PC returns error message -15000

I'm running PC with Vista and newest update iTunes.
I have set up a network through my AirPort Express, and i am streaming music wirelessly from my PC to AirPort. This used to work, but now i get an error message saying that an error occured while connecting to the AirPort, with the error code -15000. What's wrong? this used to work earlier?
This is particularly annoying since it used to work, until the latest (or the one before that) iTunes update.
Need help!

This is always a Windows firewall problem. Try opening UDP port 6002 in your firewall software.

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

Airport Wireless error message,

Similar Messages

Maybe you are looking for