Airport Xtreme problems with 10.5 but not 10.4.11 or 10.3.9

I have a one-year old Airport Extreme (801.11n) that connects generally well with my Macs running 10.3.9 (an 800MHz iMac), 10.4.11 (MacBook Pro). However, it doesn't connect well with my Macs running 10.5.3 (iMac G5 and MacBook). The iMac G5 can see the base station but the connection always times out. The MacBook can see the base station, connect to it, but can't hold the connection for a long period of time and then can't reconnect after that unless I reboot the machine.
I am beginning to think the Airport itself is getting flaky. This morning the iMac 800 MHz lost connection to the base station and couldn't get it back for about 30 min (despite repeated tries on my part). When I was troubleshooting this, my children (the iMac 800 MHz is their computer) told me that they had been having intermittent problems with wireless over the last few months...
Any advice? Thanks to anyone who can help.

Exactly the same problem with me.
Mac mini (on 10.4.11) and Imac (on 10.5.2) had no problems.
MacBook Pro (on 10.5.3) keeps dropping off the internet. I can see the network, it says I'm connected to the internet but just can't browse.
It comes up for a few minutes - then it drops out again.
A temp fix is by forcing the Extreme to 802.11b/g.
It's an invisible feature in Airport Utility.
Go to the wireless tab, and hold "control" down when clicking on the drop down menu.
Select, restart and then it should work - admittedly at lower speeds.
Hopefully the next Software Update will fix the problem.
Another fix I've heard about is to let your modem control the PPoE settings rather than putting the connection details into the Extreme.
Haven't tried it, but it's worth a shot.
Just remember to change the internet connection settings in the Extreme to connect via ethernet rather than PPoE.
Hope this helps.

Similar Messages

Airport/TC working with MacBook Pro but not with my Mac Pro???

Hi all,
I've got a Time Capsule connected to a Westell Modem through AT&T. Needless to say; I've had a lot of issues with my setup but this one has my stumped.
After my network crashed a few days ago, I reset everything and got my Airport network running on my laptop. I cannot get it to work on my Mac Pro. My MP doesn't even see the Time Capsule when I run Airport Utility. It'll show the network on the Airport Icon at the top of the page and will even let me choose it when picking a network to connect to.
Anyone know what to do, please help!!!
Thanks!!!
Chris

On the Mac that won't connect using wireless:
Open System Preferences and click on Network
Click the Airport connection on the left
Click the Advanced button on the lower right
Look for the name of your wireless network and delete it using the - (minus) button at the bottom of the connection list. Delete any other networks that you do not need as well
Apply changes
Open Hard Drive > Applications > Utilities > KeyChain Access
Under the Kind column, look for any listings of Airport Network Password and delete them
Restart your computer
Keep your Mac close to the TC for now and click the AirPort icon at the top of the screen and try to log on to your wireless network.

Airport express works with windows xp but not OS Tiger

Hi all
I’m a troubled man.
I have recently bought a new Mac pro along with an airport express. I am a first time user of Mac’s.
Here is my problem.
I use a DSL modem and my airport express is connected with the LED indicator in solid green. When I try to connect using my user name and password the “searching for POPPE sever appears at the top of my screen.” And after a few seconds “could not find POPPE server. This happens all the time. I tried to get air tunes working but itunes could not detect my airport express.
Now since I’m an engineer I needed to run auto cad on my Mac so I downloaded Bootcamp, partitioned my Macpro hard drive and installed windows XP on my Mac book pro and to my surprise windows xp found my airport and connected to the server straight away. So I experimented and download the xp version of itunes and what do you know the xp version of itunes detected my airport express and everthing worked fine for Windows! This suggests to me that the problem lies with the mac software as the airport express is working fine. Whats going on! I do not understand.
When I go back to tiger it sees my airport but cannot connect. I run the airport assistant but it cannot detect my airport. I run the utility airport program but it cannot see my airport express. I go back to windows XP everything works fine???????
If you can come up with a solution to this strange problem I would be very grateful.
Thanks

The user name and password may be just fine but the dialer software for OS X may be quirky to the point where it doesn't work with your modem through an Airport connection. My recommendation is to try uninstalling the DSL dialing software from the computer and setting up the Express to do the dialing for you. Your computer connection then becomes straight Ethernet.
If that doesn't work, have you checked to see if there's a newer version of the OS X dialing software available?

Airport Express works with my Mac but not XP Pro

Hello I have an Airport Express that I set up and use with my G4 laptop flawlessly.
My Problem is trying to get my PC, running XP Pro, to play-nice with the Airport Express.
The nutty thing is that this set up was working perfectly for months and then quit for some reason. Anyway, the I use WEP encryption and I have the same passwords set for both computers. Now, the PC sees the AE and is apparently able to connect with it but gives the alert that it has only limited connectivity and functionality with the network. Strange...
Now, as far as I can tell there are two passwords to the AE. One is the Base Station password and the other one is for the encryption. The PC never seems to ask for the Base Station password which seems odd. As I said before, this worked well at one time (with WEP) so I don't know what's going on. I also obviously don't know XP at all so I apologize. Any advice is greatly appreciated. Thanks very much.
-B

Thanks for the link. I have set the AE to use WPA encryption using a 13 character plain-text network key password. I'm led to believe that this would be a palateable password for both the Mac and PC...of course this doesn't fix things. I should know that simply entering the same network key on both computers would not work. That would be too easy... Well now, in XP under Network Properties it only offers WEP or None for Data Encryption. This is weird right? Thanks a lot for all your help.
-B

Airport Express works with Bose radio, but not with my amp. Why?

Hello everyone.
I have a Bose Wave Radio that's about 10 years old. I'm able to connect it to my Airport Express via the 3.5mm jack/ RCA (red/white) cable.
I can stream Airtunes (from my Macbook Pro) into it fine, with normal functionality and volume control, including using Apple Remote on my iPhone 4.
Now the problem:
When I take that same red/white RCA cable (while it's streaming good music to the Bose), unplug it, and plug it into my amp (an old Kenwood), I can hear the music, but just barely. Even with all volume sliders all the way up, and the amp volume near max, the music is barely audible.
I've tried hard reset on the Express, and I've tried every possible RCA and speaker connection on the back of my amp.
Why does the Bose work normally, but my nice amp produces barely audible sound?
Is there a fix for this?
Thanks!

Based on the information in your post, you know two important things:
1) The AirPort Express is operating correctly
2) The cable/adapter that you are using is working correctly as well
So, the problem is with your amplifier. You don't have the Tape Monitor button pushed in, do you?
Have you checked the amplifer with other audio sources and cables? If you have an iPhone, iPod or any other similar audio device with an audio output jack, give that a try and see if you get the same results. If you do, this again confirms that the problem is with your amplifier, not the AirPort Express or your audio cable.

Problem with JRE1.5 but not JRE1.4

I have a program, that compiles and runs well on Java 1.4 but has serious trouble on Java 1.5.
I will click a button and then the GUI will freeze for 10 seconds, with the CPU at 60%. It shouldn't be doing anything intensive, just updating a couple of JLists. The problem is very inconsistant. I will remove parts of the code, and the problem happens on some other action.
I've tried this on linux and windows, with the same results. 1.4 good, 1.5 bad. Here is a dump (after sending it a sig 3) while it was in this frozen state. It looks like its waiting for something... what!
Any pointers will be appreciated....
Michael
Full thread dump Java HotSpot(TM) Client VM (1.5.0-b64 mixed mode, sharing):
"DestroyJavaVM" prio=1 tid=0xf3b00a68 nid=0x29c3 waiting on condition [0x00000000..0xfeffd260]
"TimerQueue" daemon prio=1 tid=0x083eaa28 nid=0x29d5 in Object.wait() [0x02b80000..0x02b80480]
at java.lang.Object.wait(Native Method)
- waiting on <0xcac5a100> (a javax.swing.TimerQueue)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0xcac5a100> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=1 tid=0x083d5b78 nid=0x29ce runnable [0x01323000..0x01324780]
at java.lang.AbstractStringBuilder.expandCapacity(AbstractStringBuilder.java:99)
at java.lang.AbstractStringBuilder.append(AbstractStringBuilder.java:393)
at java.lang.StringBuffer.append(StringBuffer.java:225)
- locked <0xca55ffa8> (a java.lang.StringBuffer)
at Map.toString(Unknown Source)
at TabListCellRenderer.getListCellRendererComponent(Unknown Source)
at javax.swing.plaf.basic.BasicListUI.updateLayoutState(BasicListUI.java:1134)
at javax.swing.plaf.basic.BasicListUI.maybeUpdateLayoutState(BasicListUI.java:1084)
at javax.swing.plaf.basic.BasicListUI$Handler.valueChanged(BasicListUI.java:2200)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:214)
at javax.swing.DefaultListSelectionModel.insertIndexInterval(DefaultListSelectionModel.java:566)
at javax.swing.plaf.basic.BasicListUI$Handler.intervalAdded(BasicListUI.java:2158)
at javax.swing.AbstractListModel.fireIntervalAdded(AbstractListModel.java:130)
at javax.swing.DefaultListModel.addElement(DefaultListModel.java:348)
at BLS_ES202.UpdateCodeList(Unknown Source)
at BLS_ES202.NAICSFilterComboBoxActionPerformed(Unknown Source)
at BLS_ES202.access$500(Unknown Source)
at BLS_ES202$6.actionPerformed(Unknown Source)
at javax.swing.JComboBox.fireActionEvent(JComboBox.java:1197)
at javax.swing.JComboBox.contentsChanged(JComboBox.java:1268)
at javax.swing.AbstractListModel.fireContentsChanged(AbstractListModel.java:100)
at javax.swing.DefaultComboBoxModel.setSelectedItem(DefaultComboBoxModel.java:88)
at javax.swing.DefaultComboBoxModel.removeElementAt(DefaultComboBoxModel.java:140)
at javax.swing.DefaultComboBoxModel.removeElement(DefaultComboBoxModel.java:156)
at javax.swing.JComboBox.removeItem(JComboBox.java:718)
at com.heterodyne.gui.MemComboBox.add(Unknown Source)
at BLS_ES202.BtnSelectCodeActionPerformed(Unknown Source)
at BLS_ES202.access$700(Unknown Source)
at BLS_ES202$8.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3093)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1766)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:234)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"AWT-Shutdown" prio=1 tid=0x083cfd48 nid=0x29cd in Object.wait() [0x017f3000..0x017f3700]
at java.lang.Object.wait(Native Method)
- waiting on <0xcaa026d8> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0xcaa026d8> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"AWT-XAWT" daemon prio=1 tid=0x083c7418 nid=0x29cc runnable [0x04681000..0x04681680]
at sun.awt.X11.XToolkit.waitForEvents(Native Method)
at sun.awt.X11.XToolkit.run(XToolkit.java:463)
at sun.awt.X11.XToolkit.run(XToolkit.java:438)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=1 tid=0x083bb430 nid=0x29cb in Object.wait() [0x03f60000..0x03f60600]
at java.lang.Object.wait(Native Method)
- waiting on <0xcaa027f8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0xcaa027f8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=1 tid=0x080a0790 nid=0x29c9 runnable [0x00000000..0x00000000]
"CompilerThread0" daemon prio=1 tid=0x0809f2e0 nid=0x29c8 waiting on condition [0x00000000..0x00531e68]
"Signal Dispatcher" daemon prio=1 tid=0x0809e2c0 nid=0x29c7 waiting on condition [0x00000000..0x00000000]
"Finalizer" daemon prio=1 tid=0x0809a690 nid=0x29c6 in Object.wait() [0x00406000..0x00406780]
at java.lang.Object.wait(Native Method)
- waiting on <0xca9db230> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0xca9db230> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=1 tid=0x080987d0 nid=0x29c5 in Object.wait() [0x00311000..0x00311700]
at java.lang.Object.wait(Native Method)
- waiting on <0xca9db2b0> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0xca9db2b0> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=1 tid=0x08095d10 nid=0x29c4 runnable
"VM Periodic Task Thread" prio=1 tid=0x080a1cf8 nid=0x29ca waiting on condition

I've extracted the minimal code that shows this problem...
You need to include AbsoluteLayout.jar in the classpath
* Test code to show anomaly between Java1.5 and Java1.4
* Select the first 5 elements then press "In" to move the elements to the right box.
* Then press "out" to return them.
* On 1.4 it happens instantaneously, on 1.5 it takes > 10 seconds !!!
import java.awt.*;
import java.util.*;
import javax.swing.*;
public class ES202_GUI extends javax.swing.JFrame {
    public ES202_GUI() {
        initComponents();
        vCodeVector      = new Vector ();
        LoadTestVector ( vCodeVector );
        UpdateCodeList( );
    private void initComponents() {
        java.awt.GridBagConstraints gridBagConstraints;
        IndustryPanel = new javax.swing.JPanel();
        jScrollPane2 = new javax.swing.JScrollPane();
        CodeSelect = new javax.swing.JList();
        jScrollPane1 = new javax.swing.JScrollPane();
        CodePool = new javax.swing.JList();
        BtnDeselectCode = new javax.swing.JButton();
        BtnSelectCode = new javax.swing.JButton();
        getContentPane().setLayout(new javax.swing.BoxLayout(getContentPane(), javax.swing.BoxLayout.X_AXIS));
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        IndustryPanel.setLayout(new org.netbeans.lib.awtextra.AbsoluteLayout());
        IndustryPanel.setBorder(new javax.swing.border.TitledBorder(""));
        CodeSelect.setFont(new java.awt.Font("Default", 0, 12));
        CodeSelect.setModel(new DefaultListModel());
        jScrollPane2.setViewportView(CodeSelect);
        IndustryPanel.add(jScrollPane2, new org.netbeans.lib.awtextra.AbsoluteConstraints(420, 40, 350, 150));
        CodePool.setFont(new java.awt.Font("Default", 0, 12));
        CodePool.setModel(new DefaultListModel());
        jScrollPane1.setViewportView(CodePool);
        IndustryPanel.add(jScrollPane1, new org.netbeans.lib.awtextra.AbsoluteConstraints(10, 40, 350, 150));
        BtnDeselectCode.setText("Out");
        BtnDeselectCode.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                BtnDeselectCodeActionPerformed(evt);
        IndustryPanel.add(BtnDeselectCode, new org.netbeans.lib.awtextra.AbsoluteConstraints(360, 90, 60, 30));
        BtnSelectCode.setForeground(new java.awt.Color(0, 0, 128));
        BtnSelectCode.setText("In");
        BtnSelectCode.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                BtnSelectCodeActionPerformed(evt);
        IndustryPanel.add(BtnSelectCode, new org.netbeans.lib.awtextra.AbsoluteConstraints(360, 40, 60, 30));
        getContentPane().add(IndustryPanel);
        pack();
    private void BtnDeselectCodeActionPerformed(java.awt.event.ActionEvent evt) {
        int Selections[] = CodeSelect.getSelectedIndices();
        Map     Next;
        if ( Selections.length > 0 )
            for( int i = 0; i < Selections.length; i++ ) {
                Next = (Map)CodeSelect.getModel().getElementAt(Selections);
((Map)vCodeVector.get( Next.VectorIndex )).bSelected = false;
else
for(int i = 0; i < CodeSelect.getModel().getSize(); i++) {
Next = (Map)CodeSelect.getModel().getElementAt(i);
((Map)vCodeVector.get(Next.VectorIndex)).bSelected = false;
if ( Selections.length > 0 )
for( int i = Selections.length-1; i >= 0 ; i-- ) {
((DefaultListModel)CodeSelect.getModel()).removeElementAt(Selections[i]);
else
((DefaultListModel)CodeSelect.getModel()).removeAllElements();
UpdateCodeList();
private void BtnSelectCodeActionPerformed(java.awt.event.ActionEvent evt) {
int Selections[] = CodePool.getSelectedIndices();
Map Next;
if ( Selections.length > 0 )
for( int i = 0; i < Selections.length; i++ ) {
Next = (Map)CodePool.getModel().getElementAt(Selections[i]);
((DefaultListModel)CodeSelect.getModel()).addElement( Next );
((Map)vCodeVector.get( Next.VectorIndex )).bSelected = true;
else /* If we are transferring everything */
for(int i = 0; i < CodePool.getModel().getSize(); i++) {
Next = (Map)CodePool.getModel().getElementAt(i);
((DefaultListModel)CodeSelect.getModel()).addElement( Next );
((Map)vCodeVector.get(Next.VectorIndex)).bSelected = true;
if ( Selections.length > 0 )
for( int i = Selections.length-1; i >= 0 ; i-- ) {
((DefaultListModel)CodePool.getModel()).removeElementAt(Selections[i]);
else
((DefaultListModel)CodePool.getModel()).removeAllElements();
/********************** Main Main Main Main Main
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new ES202_GUI().setVisible(true);
// Update the NAICS Pool ListB
private void UpdateCodeList() {
Map Next;
((DefaultListModel)CodePool.getModel()).clear();
for(int i=0; i < vCodeVector.size(); i++ ) {
Next = (Map)(vCodeVector.get(i));
((DefaultListModel)CodePool.getModel()).addElement( Next );
private void LoadTestVector( Vector vTestVector ) {
Map record;
int index = 0;
for( int j=0; j < 2000; j++ ) {
record = new Map();
record.Code = new Integer( j );
record.bDisplay = true; record.bSelected = false;
record.VectorIndex = j;
vCodeVector.add( record );
private Vector <Map> vCodeVector;
// Variables declaration - do not modify
private javax.swing.JButton BtnDeselectCode;
private javax.swing.JButton BtnSelectCode;
private javax.swing.JList CodePool;
private javax.swing.JList CodeSelect;
private javax.swing.JPanel IndustryPanel;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JScrollPane jScrollPane2;
// End of variables declaration
class Map {
boolean bDisplay, bSelected;
int Code, VectorIndex;
public String toString() {
return( String.format("%s", Code) );

Problems with template working but not working...

Ok, so I have a template I’m using in Dreamweaver 8
– it’s working out well, with 3 editable regions, and
I'm using a couple of stylesheets as well. Unfortunately
something’s happened to the template though – I’m
able to apply it to all my pages, but within DW itself the template
is showing up as being unstylized.... you know how a page looks
when it doesn’t have a stylesheet attached – that plain
white and black? That’s how my template (and all my pages
which use the template) looks
*within* DW. If I open up the HTML files created from the
template, they'll show up fine in Firefox or Safari - but from
within Dreamweaver itself it's like it's not recognizing the
stylesheet in a way. The path is there correctly - just some how my
template is getting in the way :(
Has this happened to anyone? Any ideas on how to rectify it?
I've got a main stylesheet attached (globalstylesheet.css) but I've
never had this problem before. Help!

Hi Murray,
thanks for posting. Yes, I usually just do a child from the
template and cut and paste - would that be why the template got
screwed up.
This is really frustrating me, since the joy of DW is the
ability to view the code AND the WYSIWYG panel at the same time -
but I have no such luck right now... help!
Here is my template:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Strict//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>

<title></title>

<meta http-equiv="Content-Language"
content="English" />
<meta http-equiv="Content-Type"
content="text/html; charset=UTF-8" />
<link href="../globalstylesheet.css"
rel="stylesheet"
type="text/css" />
</head>
<body>
<div id="wrap">
<div id="header">
<h1>Rachel M. Murray User Experience
Design</h1>
<h2>at the intersection of business design and
technology is good user experience</h2>
</div>
<div id="navigation">
<ul>
<li><a
href="../welcome.html">welcome</a></li>
<li><a
href="../who.html">who</a></li>
<li><a
href="../work.html">work</a></li>
<li><a
href="../write.html">write</a></li>
<li><a
href="../sitemap.html">where</a></li>
</ul>
</div>
<div id="content">
<div id="right">
</div>

<div id="left">
<div class="menutop">
</div>
<div class="menumiddle">
</div>
<div class="menubottom">
</div>
</div>

<div style="clear:both;">
</div>
</div>
<div id="footer">
&nbsp;&nbsp;&nbsp;<img
src="../images/tinylogo.gif" alt="tiny
logo" width="16"
height="18" align="top"
/> <span
class="footertext">Copyright
&copy; 2007 and beyond Rachel M. Murray User Experience
Design. All Rights Reserved.
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;Revised
from a design by <a href="
http://www.minimalistic-design.net/"
target="_blank">Minimalistic
Designs</a></span></div>
</div>
</body>
</html>
any help is appreciated - thanks...

AirPort Extreme works with my Mac, but not my PSP?

Just got a new AirPort Extreme today, and I had difficulty setting up because i had typed something wrong. I fixed it and was excited to see that my homepage appeared on my computer, then I tired connecting with my PSP, and it found the signal then gave me a message that that it couldn't connect with the IP. The type of encryption was supported, and the code for the security was correct, but I still cannot figure out why it won't work.
I successfully hooked up the signal, not the ethernet, through the Mac OS X system, and the Windows Vista Ultimate system which is installed through Bootcamp. I cannot figure out why, though, that the PSP won't connect.
Please help or explain what I might be doing wrong!!!!

On your Mac, open the Airport Utility.
Select the airport base station from the list, go to manual setup.
From menu select, Base Station > Equivalent Network Password
Now copy copy password onto the Windoz PC.

Compile / run problems with netbeans 6 but not netbeans 6 beta 1 or 5.5

When I compile my project in netbeans IDE 6.0 (Build 200711261600) 1.6.0_01; Java HotSpot(TM) Client VM 1.6.0_01-b06 i get quite often a "can not find symbol" error or during runtime a "netbeans 6 java.lang.NoClassDefFoundError" exception. also switching between F6 or ctrl-F5 mode can cause the problem to appear.
Compiling again or clean build resolves it.
However running the same project under netbeans 5.5 or 6 beta 1 never gives this problem.
any hint what might be wrong? i looked and compared the project settings but can't see any difference, but I assume that the upgrade script must have changed something.

<?xml version="1.0" encoding="UTF-8" ?>
- <project name="BorderDemo" default="default" basedir=".">
<import file="nbproject/build-impl.xml" />
</project>This is 'build.xml' file. Check for 'project.xml' file in 'nbproject' folder. You will find it to be:
<?xml version="1.0" encoding="UTF-8" ?>
- <project xmlns="http://www.netbeans.org/ns/project/1">
<type>org.netbeans.modules.java.j2seproject</type>
- <configuration>
- <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
<name>BorderDemo</name>
<minimum-ant-version>1.6.5</minimum-ant-version>
- <source-roots>
<root id="src.dir" />
</source-roots>
</data>
</configuration>
</project>Change it to:
<?xml version="1.0" encoding="UTF-8" ?>
- <project xmlns="http://www.netbeans.org/ns/project/1">
<type>org.netbeans.modules.java.j2seproject</type>
- <configuration>
- <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
<name>BorderDemo</name>
<minimum-ant-version>1.6.5</minimum-ant-version>
- <source-roots>
<root id="src.dir" />
</source-roots>
<test-roots>
<root id="test.src.dir" />
</test-roots>
</data>
</configuration>
</project>I hope it works.....
thanks!

Problems with Admin Account but not Test Account?

I recently installed my applications into this new MacBook Pro and it was working fine. After a few days Photoshop began acting up and after spending time with Adobe, it was determined that the Test Account is working properly but my Admin account is not. I reinstalled my Operating System but the same issue persists. There are three Framework permissions that won't repair in disk utility, would this have anything to do with it?
What else should I try?
Thanks for your help.

Greetings,
If 1 user account has an issue but another does not then that would suggest something has changed in that user. Reinstalling has no effect on user specific issues (usually) as applications are usually system wide.
If it is only Adobe Applications that are acting strange, Adobe should be able to tell you what user specific files Photoshop has and where they are located. Personally I would contact them back before blindly yanking files (they make their software after all. They should know best what files might be important.)
However if you are feeling adventurous:
You could start by removing user specific files:
Your User > Library > Caches (restart after pulling this to the trash)
Your User > Library > Preferences > Adobe and/or com.adobe files (restart after removing)
This article might also be of use: http://support.apple.com/kb/HT1199
Hope that helps.

My Airport works fine with my Macs but not with Windows netbook

I bought my first Apple in 1987 and have never owned a Windows computer. I bought an MSI Wind netbook (too long of a story to go into here) and I can't seem to get it to recognize my Airport network. I have three Macs, an iPad and two iPhones that have no trouble getting on the network. Using this Windows machine is like learning a foreign language. I have no idea where to begin troubleshooting. It has XP installed and is a used machine. It seems to work great in every other aspect except for this.
If anyone could point me to some step by step instructions or have any suggestions, I would appreciate it. I have a feeling it's something simple, but I am in foreign territory! Thanks.

Ok, I guess we will just have to assume that the wireless capability of your netbook is functional.
Let's start by using Windows XP's automated network troubleshooting feature, called Network Diagnostics.
To use Network Diagnostics, follow these steps:
1. Click Start, and then click Help and Support.
2. Click the link to Use Tools to view your computer information and diagnose problems, and then click Network Diagnostics in the list on the left.
3. When you click Scan your system, Network Diagnostics gathers configuration information and performs automated troubleshooting of the network connection.
4. When the process is completed, look for any items that are marked "FAILED" in
red, expand those categories, and then view the additional details about what the testing showed.
Please post back your results.

Printing Problems with PS CC, but not CS5 or CS6

When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed:
In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).
In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.
When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
Any advice or insight would be appreciated.

I see the new/hacked AppColorMatchingInfo.xml file includes PS CC, v14.0.0.221
Here's a clip from the info.plist file inside PS CC:
</array>
          <key>CFBundleExecutable</key>
          <string>Adobe Photoshop CC</string>
          <key>CFBundleGetInfoString</key>
          <string>14.0 (20130423.r.221 2013/04/23:23:00:00)</string>
          <key>CFBundleIconFile</key>
          <string>PS_AppIcon.icns</string>
          <key>CFBundleIdentifier</key>
          <string>com.adobe.Photoshop</string>
          <key>CFBundleInfoDictionaryVersion</key>
          <string>6.0</string>
          <key>CFBundleLongVersionString</key>
          <string>14.0 (20130423.r.221 2013/04/23:23:00:00)</string>
          <key>CFBundleName</key>
          <string>Photoshop</string>
          <key>CFBundlePackageType</key>
          <string>APPL</string>
          <key>CFBundleShortVersionString</key>
          <string>14.0.0</string>
          <key>CFBundleSignature</key>
          <string>8BIM</string>
          <key>CFBundleVersion</key>
          <string>14.0.0.221</string>
          <key>CGDisableCoalescedUpdates</key>
          <true/>
          <key>CSResourcesFileMapped</key>
          <false/>
          <key>DTCompiler</key>
          <string>com.apple.compilers.llvm.clang.1_0</string>
          <key>DTPlatformBuild</key>
          <string>4E2002</string>
          <key>DTPlatformVersion</key>
          <string>GM</string>
          <key>DTSDKBuild</key>
          <string>11D50a</string>
          <key>DTSDKName</key>
          <string>macosx10.7</string>
          <key>DTXcode</key>
          <string>0432</string>
          <key>DTXcodeBuild</key>
          <string>4E2002</string>
          <key>LSMinimumSystemVersion</key>
          <string>10.6.0</string>
          <key>NSAppleScriptEnabled</key>
          <string>Yes</string>
          <key>NSHumanReadableCopyright</key>
          <string>Copyright © 1990-2013 Adobe Systems Incorporated</string>
          <key>NSPrincipalClass</key>
          <string>PhotoshopNSApplication</string>
          <key>UIDisallowUserKeyboardShortcuts</key>
          <true/>

ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

We have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions

we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Airport Xtreme problems with 10.5 but not 10.4.11 or 10.3.9

Similar Messages

Maybe you are looking for