AirportExtreme base station - Slow wireless n

I’ve got a harddrive connected to my Airport extreme, I have it setup to dual mode, 2,4 and 5 ghz, and my macbook pro is connected to the 5ghz band.
But I get really really slow transfer speeds. 0,5 – 2 megabytes a sec. when copying files from my airdisk.
Can’t even stream a high bitrate 720p video from it without it hitching.
Seems like I have tried everything .
I will be great full for any suggestions.
Sorry for the broken English.

If you connect your MacBook Pro to the 802.11n AirPort Extreme Base Station's (AEBSn) 2.4 GHz network, do you see any improvement in the data transfer rate? If not, how about if your connect your MBP directly to the AEBSn by Ethernet?

Similar Messages

Using a Airport Express Base Station for wireless printing.

Using a Airport Express Base Station for wireless printing. Got a new DSL router yesterday. Our old one we did not have password protected. The new one is. I can't figure out how to get the base station to connect with the new router.

thanks for the reply, I couldn't connect with the base station. The solution (thank you apple genius bar) was to do a soft rest of the unit which allowed and ethernet connectiont to be established. Took the genius bar gy about ten min (and 2 attempts) to get the base station reconfigured. Got home and it worked like a charm. Would have never known what he knew. Thank you genius bar. Thank you for taking time to respond.

Can't read airport express base station configuration wirelessly

The setup:
2TB time capsule that takes the ethernet feed from the cable modem for internet access.
Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
The problem:
I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
Any thoughts?

When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
Modem/Router Power Recycling - Quick
- Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
- Power-on the BT Voyager modem; Wait at least 5 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
- Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the BT Voyager modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)

Unable to set up base station as wireless client

I have a network with one Airport Extreme (UFO-shape) and three Airport Express base stations. Now I had to do a hard reset of all the base stations, and want to use Airport utility to set up the network again.
I have no problems setting up the Airport extreme as the main base station, and the first Airport express as a remote base station (extending the network). I want to set up the other two Airport Express stations as wireless clients (I only use them for iTunes via Airtunes).
My problem is that when I reach the point where I can choose between setting them up to either extend the network or as a wireless client, I am not able to proceed if I choose the latter (nothing happens when I press "continue"). I can only go through the setup process if I choose the Airport Express to be an extension of the network (a remote base station).
For one of the Airport express, I then later manually changed the setup from "be a part of a WDS network" to "connect to a wireless network". But when I try this for the last Airport Express, I am no longer able to contact the base station if I try to do the same. I have chosen channel 11 for the network, and I think in some way or another, after I manually change the settings for the last Airport express, it switches to another channel. After this I can no longer read the base station configuration or connect to it via airtunes.
When I do a hard reset again, and go through the process once more, everything is OK as long as I keep it as a remote base station. But I really would like it to be connected as a wireless client
Any ideas?

The basic wiring setup would include connecting an Ethernet cable from one of the available LAN <-> Ethernet ports to the WAN "O" port on the Time Capsule.
You can run an Ethernet cable up to 100 meters or 300+ feet so the trick will be locate the Time Capsule in the middle of the area where you need more wireless signal coverage.
To have the Time Capsule "extend" the wireless from the gateway, you would need to configure it to create a new wireless network using the same wireless network name, same wireless security setting and same password as the gateway's wireless network.
The final configuration step would be to make sure that the Time Capsule is setup to operate in Bridge Mode, so that it will function as a client for the gateway router.
The specifics of how to do this will depend on the version of AirPort Utility that you are using on your Mac. Post back if you need more details on this.

Advise Using Base Station as wireless and wired connection

I have an Airport Extreme dual N base station. I want to use it as a wireless base station to connect to the Internet and use the ethernet ports on the base station to connect to my security camera's DVR, to connect a Vonage phone and to plug into my computer on my desk. I have 5 static IPs which I don't have to use.
Is this possible and if it is could someone give me some pointers with hand holding on how to do it?
Thanks,
Michael

Did you connect them together and experience a problem?

Airport Extreme Base Station as Wireless Adapter

I have a Verizon FIOS network coming into my house and connected to the supplied wireless router. Our three Macs are connected to it wirelessly, as our the iPhone and Touch.
I have a G5 in the basement that does not have a wireless adapter. I bought an older AEBS b/g model in hopes that I could connect to the G5 (with the LAN port) and wirelessly connect to my existing home network. Basically, I was hoping to use it as a wireless adapter.
Is this possible? I have been looking all over as well as in the documentation and cannot figure out how to do it.
Thanks for the help.
Jeff

I bought an older AEBS b/g model in hopes that I could connect to the G5 (with the LAN port) and wirelessly connect to my existing home network. Basically, I was hoping to use it as a wireless adapter.
Is this possible? I have been looking all over as well as in the documentation and cannot figure out how to do it.
Sorry, but no. Instead, the newer 802.11n AirPort Express Base Station (AX) could be used as an Ethernet bridge, which would basically do the same thing. With this type of bridge, you could connect your G5, by Ethernet, to the AX's Ethernet port and, in turn, the AX would connect wirelessly to your Verizon wireless network.

Roaming (ethernet connected base station) and wireless extended network at the same time. Good idea?

I have a Time Capsule (6th gen.) which is my main base station. I also have a number of airport extremes around the house. I only use them in the client mode, i.e. they just join the network so that I can stream audio to devices connected to them.
As I had bad reception in the garden, I installed my old dual-band airport extreme (4th gen) in the garden shed. All Apple articles I read on the topic convinced me that roaming (ethernet connected base station) is much better than wireless extending because you don't lose throughput. As I had no ethernet in the shed, I used two powerline adapters to bring ethernet there and I connected my airport extreme.
Then I had to re-install all the airport expresses (as I had also changed the name of the network) and I noticed that the default option of the Airport utility is to make them extend the network wirelessly instead of just joining to it. I did not do it, but I am wondering. Is it a good idea? As they are in different rooms than the Time Capsule, of course the network there is not as strong as close to the Time Capsule. I still get "good enough" connection, but I will I have an improvement if I allow every Airport Express to extend the network as well? Or will I have problems with the throughput. My idea is not to do it and keep the net as simple as possible, i.e just extend it with roaming in the garden where I really need it and let the airport expresses in client mode.

As usual AirPort Utility is trying to be clever. It is proposing what Apple thinks most people will want to do with it, and most of the time it succeeds.
Having the Expresses "wirelessly extend" the Time Capsule's wireless network will increase your wireless network service area and should not introduce new problems. If that is not what you want to do though, you can certainly return to AirPort Utility and select "join a wireless network". It is a simpler configuration, and simpler is better for home wireless networks.
Wireless > Network Mode > Join a wireless network.

Airport express base station as Wireless Access Point?

I purchased the Airport Express base station with the intent of providing wi-fi for my office. There is already a router with the radio turned off serving as a network switch. Can I add the Airport express as a wireless access point?

Sorry, I do not have an iOS device handy to try to figure out what is going wrong. Having tried this in the past though, I have noticed that AirPort Utility for iOS tries to analyze the connection and then configure things automatically.
Unfortunately, it does not always choose the correct settings and then it is necessary to look for a way to manually configure things.
I may be able to use my wife's iPad later today. Please confirm that you are connecting an Ethernet cable from one of the LAN <-> ports on the router or switch to the WAN "O" port on the AirPort Express so that I can set things up exactly the same way here and work on a manual procedure for the configuration.

Airport base Station and Wireless Web cams

I just tried to take a free CNET online course that purported to show me, step by step, how to set up a wireless Web cam with an Internet connection. Yea, right. I found that it was totally geared to PC users and almost no information was provided for us. Even the suggested hardware manufacturers (Linksys) said they didn't support Macs.
I have Airport card and base station and need to set up 2-3 outdoor security cams around a home in a remote location. Can anyone advise me along these lines?
Thanks!

Welcome to Apple Discussions!
Have you considered using Security Spy? http://www.securityspy.com/
They claim to support many wireless cameras....but it doesn't appear Linksys is one of them. Linksys historically doest not provide any Mac support, and I have personally learned to no longer support companies that don't provide some type of Mac support. (I've been a fan of Linksys historically, untill recently)
I hope Security spy works for you - let us know how it works out.

Using Airport Extreme base station as wireless Cable router and airtunes.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
I would like this if it is a wireless standalone router as I want to but a pair of wireless airtunes router for music around the house keeping the Airport Extreme in my room where the airtunes routers would not be as I have the computer in my room and I have iTunes right there and would not need the airtunes routers in my computer room.
Leon.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
The AirPort Extreme Base Station (AEBS) does NOT have a built-in DSL/Cable modem. You will still require a Cable modem in order to access your ISP's Internet service.
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
The AEBS IS a wireless router, but it is NOT a combination wireless router & cable modem.

My base station slows my internet speed how do i fix that

how do increase the speed of my airport?
i have tested it with speed test direct to my modem and through my airport and it is only half as fast

What MacBook? How did you try to 'play' CDs? What happens? Does it happen with a specific CD, some CDs, or all CDs? Does it happen with data CDs, or audio CDs, or both? Does it happen with commercially-pressed CD, or CD-R, or both?

Airport Extreme Base Station as an wireless Extender to new Airport time capsule

After many months of time machine back up problems. (verify back up failing) I am considering biting the bullet and getting a new 2TB Airport extreme time capsule. Can I use the old (late 2013 801.11ac) airport extreme to extend wifi network?
A few other questions.
1.Does extending reduce wifi performance?
2. If using extreme as extender can I still plug in hard drive or hard drive to it?
3.
currently using imac 21.5 (late 2013) 1TB backing up to 6TB WD mybook live duo (connected to Extreme using ethernet), via airport extreme base station (ac wireless band to mac)
Any guidance appreciated.

Is it possible to quantify how much faster USB back up is compared to 802.11ac between mac and AirPort time capsule?
600GB should take 10 hours by ethernet. And it will be somewhat faster by USB3.. exactly how fast is difficult to predict as the first TM backup itself is slow due to many small files. In terms of raw speed maybe twice but it will depend on the disk used. USB you can use an SSD and get super huge speed. (not that I think you will be buying a 1TB SSD anytime soon).
In terms of raw speed it is cheese and chalk. The max speed of real world file transfer on AC wireless is around 430Mbps and that is using ideal world.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c?see=MAX
This has nothing to do with link speed.. this is how fast a file actually transfers. And that is assuming the iMac and the TC are in the same room. And everything is perfect with nothing else using connection.
The real world speed of USB3 is around 100MB/s to a spinning hard disk..
http://www.macworld.com/article/2039427/how-fast-is-usb-3-0-really-.html
which may indicate the limit is the actual disk speed. In bits per second you x 8.. so the USB3 is 800Mbps. The advantage of USB direct connection is that speed is available at all time. Not when your close or the load on wireless is low.
Further to your comments when extending. Is it only the area covered by extending that has reduced performance or all the wifi signal?
The speed will depend on hops..
So if the computer is using resources on a local router.. and only one wireless hop then it is fast.
If it is using resources via a second router so wireless goes.. computer--- router2----router1-- resource.
Your speed drops 50% at best.. at worst it is really bad.
For example.. computer 1 on router 1 accesses computer 2 hard disk on router2 with everything wireless.
Count the hops. C1-R1, R1-R2, R2-C2
That gives 3 hops. So each packet is transmitted.. along that chain.. each transmission can only begin after it is received in full. Now add some other computers using resources.. say C3 is using internet via R1.. that has to be time sliced. So you get 50% of 50% of 50% of 50%. It is obvious that wireless networks have a huge handicap.. they cannot transmit and receive at the same time.. nor can they talk to more than one client at a time.. so add time slicing to wireless hopping.
Now ethernet is entirely different. It can transmit and receive at the same time.. ie is duplex. And in a switch it can talk to several computers at the same time. That is why we say.. as much as you can ethernet.. and use wireless as the last single hop to a client that needs it.. ie iphone or ipad.. or laptop if you cannot plug in ethernet.
Can the ac wifi format be extended using AirPort Extreme and time capsule.
Over very short range yes. AC wireless is only on 5ghz and is poor penetration of solids.. so this will work but maybe only to the next room.

Time capsule not working as wireless base station suddenly

I have been using my time capsule as base station for wireless network in our house for some time and suddenly network is not working for all wireless devices in the house. Desktop imac is connected to internet via ethernet cable through time capsule and works fine so I know problem is not with cable modem or signal coming to house. Laptops appear to be connected to my network fine but when attempting to connect any site through safari or firefox I just get the spinning wheel thingy.

Check that the laptops are getting DNS and router (gateway) from the TC.. if not reset it and do the setup again.
What OS are you actually running on the laptops.. this problem started with Lion and is much worse in ML.. it is actually not a Snow Leopard issue which you list as the OS.

What is the best wireless base station for a clamshell?

i want to purchase a wireless base station for my clamshell but am unsure on which apple product to buy. do you recommend the airport extreme or just the original airport. i've heard from some people that the extreme doesnt' work that well.

The perks of the airport extreme base station are Wireless B/G/N compatibility as well as a USB port for sharing external harddrives, printers, etc.
Your ibook is only compatible with Wireless B networks, so there is no sense in paying for G/N compatibility unless you really need it. The same holds true for the USB port in my opinion. Unless you need it why pay for it.
The original airport base stations are cheaper, and they do exactly what you need them to do.
That's my two cents
Vince

Airport Extreme Base Station and xBox wireless

We have 2 macs with Airport Extreme Base Station connecting to Cable modem for internet connection.
Recently bought an xBox with a USB wireless adaptor. When xBox is connected to the wireless network, internet connection of other computers dropped out and no longer can use internet until xBox is disconnected from the wireless network. It is the same problem even other computers are connected to Base Station with Ethernet cable.
Any settings in Airport Utility might fix this problem ?

We didn't have any problem before using the xBox wireless.
There are 2 Macs (iMac 20" & Macbook Pro 15") and they're connected to the Base Station via wireless.
The cable modem is Motorola Surfboard SB5100i and there is no login required from ISP for internet connection. Yes, the modem is connected to the WAN port of the Base Station.
With the Clients computer network settings, we are using DHCP. We have also tried with static IP and didn't make any differences.
I thought it could be the compatibility issue between the xBox wireless adaptor and the Base Station and on the other hand, the wireless protocols (802.11N/g/b) are industry standard and it doesn't matter who made them, they should work together.
The only idea that I have now is to try with other brand of wireless router and it might be a quick solution for this problem.
thanks,
David

AirportExtreme base station - Slow wireless n

Similar Messages

Maybe you are looking for