AirPrint doesn't work anymore with iOS 8
wwith iOS 8 update, AirPrint doesnt work anymore with HP printer. Lenova pc works fine. Any ideas what to do?
Hello there, Bkurowski818.
The following Knowledge Base article offers up some great recommendations for troubleshooting AirPrint issues:
About AirPrint - Apple Support
For best results
Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
The information below is provided by each manufacturer and is updated once a month by Apple. You can use the Find feature of your web browser (usually Command-F) to search for a specific device in this list. If you don't see your printer or server listed, check with the printer manufacturer for more information.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
USB personal hotspot doesn't work anymore with 10.6.8 Snow Leopard, iTunes 11.1 and iPhone5 ios7
Ciao
I'm using iPhone 5 with ios7 and Macbookpro with 10.6.8 SnowLeopard.
After updating to iTunes 11.1and ios7 hotspot USB doesn't work anymore, wifi and bluetooth work fine.
In system network preferences iPhone usb connection is not detected.
I tried to change the kext file with the Time Machine's old one but no response!!!
Can somebody help me
ThanksAnyone has any advice? Or the problem is just the age and incompatibility of the old MacBook Pro 1,1 A1150 (Mid 2006) and the best way will be to change it into something newer?
-
Snow Leopard as PXE server doesn't work anymore with Debian Lenny
Hello
I was using a box with Mac OS X 10.6.2 as a PXE boot server, providing a Debian Etch installer as boot image.
I wanted to upgrade to the Debian Lenny PXE image, but it doesn't work anymore.
I m not sure how I can debug that. I m a sure of one thing, switching for the Debian Etch image to the Debian Lenny one triggers those kernel log messages during the PXE boot, and the host who tried to boot hanged ( a Virtualbox VM).
+Feb 23 20:34:33 macbookpro kernel[0]: indelayed_cksumoffset: ip_len 50688 (198) doesn't match actual length 212+
+Feb 23 20:34:58: --- last message repeated 6 times ---+
Here is my /etc/bootpd.plist file :
+<?xml version="1.0" encoding="UTF-8"?>+
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
+<plist version="1.0">+
<dict>
<key>dhcp_enabled</key>
<true/>
<key>bootp_enabled</key>
<true/>
<key>netboot_enable</key>
<false/>
<key>Subnets</key>
<array>
<dict>
<key>name</key>
+<string>My subnet</string>+
<key>net_mask</key>
<string>255.255.255.0</string>
<key>net_address</key>
<string>192.168.0.0</string>
<key>net_range</key>
<array>
<string>192.168.0.3</string>
<string>192.168.0.6</string>
</array>
<key>allocate</key>
<true/>
<key>dhcpoption128</key>
<string>192.168.0.10</string>
<key>dhcpoption66</key>
<string>192.168.0.10</string>
<key>dhcpoption67</key>
<string>/etch/pxelinux.0</string>
</dict>
</array>
</dict>
</plist>
My /private/tftpboot/ tree is created from the http://http.us.debian.org/debian/dists/etch/main/installer-i386/current/images/n etboot/netboot.tar.gz archive. I used http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/ netboot/netboot.tar.gz for the Debian Lenny tree.
So, can someone help me ?I disabled bootp. In verbose and debug, everything seems to go well. The option 128 isn't accepted by the daemon, i disabled it too, the TFTP server is the same server than the DHCP, so it still works.
Here s the log when using the Debian Lenny image, almost the same than with Debian Etch image.
+bootpd[4754]: server starting+
+bootpd[4754]: can't open /etc/bootptab+
+bootpd[4754]: server name macbookpro.local+
+bootpd[4754]: interface en0: ip 192.168.0.10 mask 255.255.255.0+
+bootpd[4754]: interface vnic0: ip 10.211.55.2 mask 255.255.255.0+
+bootpd[4754]: interface vnic1: ip 10.37.129.2 mask 255.255.255.0+
+0.0.0.0 ==> 192.168.0.1+
+10.37.129 ==> link 8+
+10.211.55 ==> link 7+
+127 ==> 127.0.0.1+
+169.254 ==> link 4+
+192.168.0 ==> link 4+
+There are 1 entries+
+1. Subnet 'My subnet'+
+ Network: 192.168.0.0/255.255.255.0+
+ Range: 192.168.0.3..192.168.0.6+
+ Allocate: yes+
+ Lease Min: 3600 Lease Max: 86400+
+ Options:+
+ Code Length Data+
+ 66 4 c0 a8 00 0a+
+ 67 17 2f 6c 65 6e 6e 79 2f 70 78 65 6c 69 6e 75 78 2e 30+
+DNS servers: 89.2.0.1 89.2.0.2+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 8+
+dhcpmessagetype (uint8): DISCOVER 0x1+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP DISCOVER [en0]: 1,8:0:27:6a:89:5e+
state=INIT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP OFFER (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): OFFER 0x2+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: OFFER sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.007299 seconds+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 10+
+dhcpmessagetype (uint8): REQUEST 0x3+
+requestedipaddress (ip): 192.168.0.3+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+server_identifier (ip): 192.168.0.10+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP REQUEST [en0]: 1,8:0:27:6a:89:5e+
SELECT
state=SELECT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP ACK (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): ACK 0x5+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: ACK sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.001884 seconds+ -
Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!
Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
Is this a known issue and is there any solution for this?Wow that is a new one, great find!
I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread. But too late, it's on the way back to Sony to get rolled back to Gingerbread.
Too many other problems with ICS that have crippled my device.
1) Wi-Fi Hotspot does not work anymore
2) USB tethering does not work anymore
3) LED notification issues for incoming SMS
4) Dialer slow to load
5) HD Video recording skip frames and jitter.
6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
If you have not done so take a look at the above features and see what you turn up.
~Cheers~
Bob H
Minneapolis, MN
USA
ST18a Ray -
IPhoto still doesn't work correctly with IOS 4.3
Was told after last update that IOS 4.3 would finally fix Ipad and Iphone not listing events in alphabetical order, rather than just by date. Well, guess what!! It doesn't Still only shows events arranged by date. Wish I could get my old IOS back, as it always worked. Difficult to find photos with events all mixed up.
A tech person who seemed to know what he was talking about at my local Apple Store. Guess he didn't really know. I'm really kind of surprised that it still doesn't work after the amount of discussion about this issue after the last release. Guess it's not a priority for Apple.
-
[Solved] Alac doesn't work anymore with Gstreamer0.10
Apple Loseless Audio Codec support seems to be broken for me in the 0.10 branch of gstreamer. Before I was able to play ALAC files in rhythmbox and banshee but it does not work anymore. I think the support for ALAC files is integrated in the package gstreamer-ffmpeg.
This problem does't seems to occur in the 1.0 branch of gstreamer as ALAC files work with Totem and it also work with vlc which use dirrectly ffmpeg.
Does someone have the same problem or is it a problem with my system ?
I tried to reinstall gstreamer0.10 and all plugins but it didn't solve the problem.
Last edited by sedutom (2013-04-22 14:18:39)Put as solved, it works back with the new version of rhythmbox
Last edited by sedutom (2013-04-22 14:19:59) -
IWork doesn't work anymore with MacOSX Lion...
I had iWork '09 on MacOSX Snow Leopard and than I choose to install lion and was all right than I reinstall Lion because was really slowly. I didn't find all the iLife '11 and iWork. With iLife'11 I reinstall it from the TimeMachine Backup but I tried with iWork'09 and when I open Pages, Numbers or Keynotes there is a message that says:
Pages cannot be opened because of a problem.
Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any avaiable updates for the application of Mac Os X.
I tried to download the last update but nothing change, and if I wold install it again would mean t buy again all 3 of them....
Thanks, LucaLuca - uninstall iWork by using Yvans script.
Go to Yvans iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Expand the archive and run the script.
Install iWork from the dvd you have.
Then do the Software update check and install the updates. Otherwise it will not work. -
My Gmail account doesn't work anymore with Mail (the box is empty even after syncronization)
Since the update of Mavericks my Gmail account bugs a lot ! (also with the update for Gmail).
I tried to "re-build" the mail box, since it didn't work. And since I did this my Gmail box is empty, like I have no emails... I tried to sync but nothing happens.. I deleted and put again the account but nothing...
Can anybody help me with this?
Thanks a lot !There is an update available for Mail/Mavericks. Did you try updating.
"Mail Update for Mavericks"
http://support.apple.com/downloads/ -
AirPrint Doesn't work anymore on Photosmart 7510
I have the 7510 since December. When I set it up AirPrint worked like a champ from iPhone 4 and iPad 2. Sometimes had to reset the connection on the devices but otherwise I loved it. Then all of a sudden it no longer works. The printer works fine Wifi from two PCs.
I am on the same network
I have reset the modem many times
I have reset the printer many times
I have made sure AirPrint is enabled on printer
I have reconnected the printer to the network many times
The firmware on the printer is up to date
I had the wifi channel on the router set to 11
When I run the HP printer control app on the devices it shows the printer as available but doesnt capture the IP like it used to and when I try to print it shows no airprinters found.
I have scanned these forums and tried everything. But can not print from iPhone or iPad any longer.
Help!
This question was solved.
View Solution.Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
Please let me know if this fixes your issue.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks. -
Digi 002 rack doesn't work anymore with Logic Pro 7
Any help much appreciated: Like an idiot, I "upgraded" to Pro Tools 7 software from 6.9.2. Logic 7.0.1 had been running fine with the 002 as my audio interface when I had Pro Tools 6.9.2 installed.
But under Pro Tools 7, suddenly everything sounded terrible. Anytime I played my keyboard, either triggering Sculpture, the EXS24, playing audio, any instrument, it sound like ugly static.
So I uninstalled Pro Tools 7, and reinstalled 6.9.2. That didn't help, which surprised me, because I thought I "went back" to my previous setup. But something must have changed. I did go through some of the forum's troubleshooting tip. I repaired permissions, I trashed Logic and Pro Tools preferences, I verified my hard disk, checked ram, etc.
So now I'm stumped. Anyone have anything I should try?
Thanks much,
JimMaybe you need to go to Digidesign.com and find the latest core audio driver and install it ?
-
I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection for my Philips bluetooth headset doesn't work anymore. Does anybody have a solution?
I have checked the headset on another Iphone with iOS 4 and it works well.
Thanks for your help!
Pierre (from Paris - France)Bonjour Pierre,
there seems to be a bug in iOS5 with regards to Bluetooth. THere are a lot of threads in here on this. We're all waiting for Apple to fix this... -
I like to know anyone having problems with bluetooth functions with new IOS 7 ?
I have the same problem with my iPhone4 connected to my VW car via bluetooth. In the previous version of iOS I could start and stop and change tracks in for example Spoitify with my steering wheel buttons but now with iOS 7 it doesn't work anymore.... Apple please correct this ASAP...
-
Is there anyway I can transfer my music from my iPod touch to my iPad? My computer with my original music doesn't work anymore!
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?
TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this. -
I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number
The activation servers for CS and CS2 stopped working and were taken down. You'll need to take a look at this link for your issue: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Benjamin
Maybe you are looking for
-
Hello- I have wireless router Airport Extreme 802.11AC that connect direct to Cable modem...how can I setup the D-Link DIR-655 wireless router to AE and act as extender or repeater?. Thanks in advance.
-
Help with a weird little blue line in the bottom right corner of my lightbox gallery?
I get a weird little blue line in the bottom right corner of my lightbox gallery when viewing in Safari and Chrome. Its not there when looking in Dreamweaver or Firefox. I'm going crazy! Can anyone help?
-
Sample of ATP Breakage at Conversion of Planned Order
Hi, When creating the Sales Order system carries out availability check and shows missing parts with Commitment date as 99/99/9999, missing components are updated with forecast planning based on this Schedule line Qty confirms to 1 and sales order sa
-
SWF with TLF compiled in Flash CS5 can't be imported into Flex 4.5
Hello there, Trying out Flex 4.5 preview I've run into a problem: In my Flex project I dynamically load various SWF files compiled in Flash CS5. These SWFs use TLF. With Flex 4.1 everything worked as expected, but in Flex 4.5 I get RTE(s). Just to be
-
Suggestions Re: I'm running OSX 10.9.2, when my system updated it required my Apple ID... When I provided it, it said that AppleID hadn't been used at the App Store... so now I'm locked out of my system... what do I do??