AirPrint from iPad not working since update to iOS 6.1

I am unable to print from my iPad3 since I updated to iOS 6.1 last weekend.  I have the Lantronix xPrintServer Home Edition which had been allowing me to print to my networked Brother HL-5250DN as if it were an AirPrint printer.  Now, I get the message, "No AirPrint Printers Found" when I try to select a printer in the Printer Options menu.  Is there a way to roll-back this update???

It's probably best to contact Lantronix. From the AirPrint Basics page:
"You also need an AirPrint-enabled printer listed in this article. Printers not listed in this article are not supported by AirPrint."
The xPrintServer is not listed on the AirPrint Basics page.

Similar Messages

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • Iphone 4s Cellular data not working after updating to ios 6.0 .

    How to fix my cellular data, is not working after updating to IOS 6.0 ?

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

    My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
    Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

    As stated...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere

  • My "Whatsapp" not working after updating to IOS 4.3

    My "Whatsapp" & "GMAIL app" have not been  working after updating to IOS 4.3.
    Any help?

          This link may help you. Ipad unresponsive or not sycning!

  • TS3899 Push email from AOL not working since IOS7.1 update?

    As usual updated all idevices once notification received, only problem is my AOL email no longer pushes the data and I no longer receive notifications of new mail until it is "fetched" either by a timed fetch or by opening the mail app.
    This applies to all my devices iPad Air, iPhone 5s and iPad mini.
    Annoying!
    Tried resetting the account and playing with the push and fetch settings, currently set to push with fetch set to 15 minutes.

    AOL still not working, but reading the comments looks like the finger of blame is pointing towards AOL and probably just a coincedence it happened around the same time as the IOS7.1.1 update.
    So far I have had to put up with cancelling the push option and relying upon a fetch scheduled for every 15mins. will have to see how that goes.
    Anyone contacted AOL?

  • IPad 4 Sound not working after updating to iOS 8

    I just updated to the new iOS 8 on my 16GB iPad 4 (New iPad).  After the update was completed the sound didn't work at all.  No lock sound, wouldn't play any ringtones etc. and when I went into YouTube, it played the video but no sound.
    I tried a hard reset (holding down the home & lock screen button at the same time) and it now has sound, but it is way too loud and crackling.  I tried the hard reset again and this didn't do anything.
    If anyone has any suggestions, please let me know.

    I set in a genius appointmsnt and informed them of this issue and that I had tried hard resets and resting from the back up. They Informed me that it was a hardware problem and not a software problem. Since I am outside of my warranty I was informed it would be $299 to exchange for the same 4th gen iPad i had or $519 for an iPad air.  Apparently if your speakers go there is no fix other than the whole unit being replaced and he didnt have any suggestions other than to pay the money.  I hadn't had any problems with my speakers the full 1.5 years that I have had my iPad so wouldn't have know to have it replaced because of the hardware.  I was pretty ****** off leaving that appointment thinking that thanks to an update I would now have to fork out $300+ for an iPad due to an issue that i was unaware of until it happened.
    SInce they didnt try anything in the store I decided to try and reset my iPad to new and see if that made any difference. To my surprise it worked. I set it as a new iPad and didnt use my backup but had all my contacts etc in iCloud. I'm glad that this fix has worked but ****** that the so call "genius" at the Apple Store didnt even ask if I'd tried resetting it as new nor did he do anything other than run his diagnostics and then proceed to tell me it would cost me $300+ for an iPad that is selling for $380 on sale. Not pleased with the service but happy that I've found at least a temporary fix.

  • Tv adapter not working since updating ios

    since  updating my iPad 2  to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

    Hello jimtallis,
    The steps detailed below may help get your TV adapter to function correctly.
    Check the compatibility
    Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
    If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
    See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
    Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Cheers,
    Allen

  • IPad 2 earphones not working after updating to ios 6 (jack input is clean)

    Hi there, I can see some people have been having problems with their new iPad and earphones in conjunction with ios 6 but did not know if there was a thread established for the iPad 2 yet.
    I updated tonight and along with the fact that ios 6 is a complete letdown I now cannot get the iPad to recognise my earphones. They were working fine 30 minutes before the update so I know it is not the earphones.
    If I keep the app (e.g. Youtube) up and reinsert the earphones it works. However if I switch to check something on another app and come back the sound starts coming through the speakers again.
    Any help or advice much appreciated!

    I had a problem connecting to my exchange server.  It turns out that Exchange will only allow ten devices to be partnered to your account at a time.  Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships."  I followed the instructions and delted all the old accounts...problem solved.

  • Ipad 2 3G not working after update to ios 5

    hello,
    I updated ipad 2 3G to new ios5 after that 3G service is not working. i am living in saudi arabia.
    thanks
    farhan

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

Maybe you are looking for

  • Record video with built in iSight?

    My friend just got a new MacBook and we can't figure out if you can record video with the built in iSight. I know you can take pictures with Photo Booth, and from my research you can record video with the external iSight through iMovie. I figured you

  • HT2729 is it normal for itunes to open when I click on quick times links?

    I just installed a new version of Quick Time Player after I uninstalled it I have not used it for a long time. Everytime I click on something to view (like a HD Movie or new artist) I get re-routed to ITunes. I hate this ! is this how it works now? I

  • Unable to Run a .jar file in pjava

    I have installed pjava (for StrongArm) on to my iPAQ Pocket PC H3660. Then I created a simple application using JBuilder and created a *.jar file of the classes. I have used the awt classes to build the interface. I am using JDK version 1.3.0. When I

  • Oidadmin terminates after an attempt to log in

    Hello, I am trying to start oidadmin and it fails with this error message: /app/oracle/product/9.2.0.4/OID/JRE/lib/ia64/native_threads not found. Moreover my 'native_threads' directory is in a different location: /app/oracle/product/9.2.0.4/OID/JRE/l

  • MySql via Perl on OSX?

    How do I install the Perl module DBD::mysql in OSX? I've installed mysql and DBI successfully via Fink, but can't seem to be able to install DBD::mysql in this same way. I've tried using cpan, but this didn't get me far. Thanks!