Airprint in maverick??

I have macbook pro 10.6.1 and I upgraded it to 10.9 (maverick).
I want to enable airprint on this os??
Kindly help me guys!!!!!!

rajput02 wrote:
Can airprint works through the USB,wifi,network and direct connection??
AirPrint is a network technology. So it works via WiFi and Ethernet connections.
rajput02 wrote:
I uploaded above image of UI which I got after installing air printer.
This view is typical of an AirPrint printer. But I believe you get the same view with a standard HP driver. So to confirm what printer driver you are using, open Printers & Scanners and select the HP. The pane on the right side next to the word Kind may show AirPrint in the name.

Similar Messages

HT1338 I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions?

I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions??

Okay. That is a good result. It proves you have a working network connection between the Mac and the Dell.
So with the printer not showing using Bonjour, you could try adding the printer manually. With Printers & Scanners open, click the plus button to add and then select the IP icon. You can then enter the IP address of the Dell. Set the protocol to HP Jetdirect-Socket. Leave the queue name blank. Change the Name from the IP address to Dell Wireless. Leave the Location blank and in the Use menu, select the model of Dell you have. Then click Add to complete the queue creation and then see if you can print.

Cannot print wirelessly from MacBook Pro OSX Mavericks

I cannot get my new MacBook Pro (using OSX Mavericks) to communicate with my HP Officejet4500 Wireless. I can print when I use a connecting USB cable, but cannot print wirelessly. All of my Mac software updates are current as of 4/20/2014, which included an update for HP printers. When I used the disk to install the printer software, it did not have a screen for entering my wireless router ID or passcode. In the Mac System Preferences for Print and Scan, my Officejet 4500 G510n-z is listed, but to no avail. What do I have to do to get my Mac to print wirelessly? Thanks.

OK, thanks for that. It may indeed may be the problem, but let's check a couple of things first.
1. On the printer: Setup > Network > Print Network Test. Is the printer connected to the network? If it is not:
a. In the Network menu, Restore Defaults
b. In the same Network menu, run the Wireless Setup Wizard to connect the printer to your network.
2. On your Mac, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
3. Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Deskjet 3050A All-in-one printer J611 series - mavericks and wireless set up

Hi
I have a HP Deskjet 3040A All-in-one printer J611, I have had this printer for about 2years and everything worked perfect then I bought an Apple still all was alright but when I updated my software I got Mavericks and ever since then everything went wrong....I have updated my computer and have AirPrint now and also HP ePrint(currently). How ever the printer was not working or connecting.
Problem 1:
When I tried to fix the problem I uninstalled all HP drivers to reinstall - found that you have to install the apple app Done!(Airprint)
The printer was picked up by the computer and I can scan but I can not print, I'm using the USB cable, and when I print the computer shows it is printing and the printers lights come on but nothing happens(no messages display on the printer) then the computer shows the print is done - but the printer didn't print. Scan is working fine.
Problem 2:
Because of constant problems with the wireless connection I wanted to reconnect it to the router - Restore default.
But now because I don't have the HP drivers, I have no idea how to connect it and I tried both connection ways WPS is not working when I press it on the route...nothing happens and the PIN, where are you suppose to enter the pin, nothing comes up on my computer (USB connected)
I have read the installation pages over and over but can't figure out what is wrong, any advice would be appreciated.
This question was solved.
View Solution.

Hi Lilly4,
I can certainly help you get the printer on the network and working again.
Follow the steps in this thread to put the printer on the network without using the software or the WPS button. I believe we have success doing it this way.
If you continue to experience an issue after the printer is on the network, please let me know. Thanks.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot use HP scan with 7520 on OSX Mavericks

I have added a new computer to the household---a 2014 macbook air. I currently use my 7520 to print and scan without any problems on our other home computer (2011 macbook pro). I just installed the latest drivers and software (for Mavericks 10.9) and software, and I can print just fine using any print dialog. I can also scan documents if I use Apple's built-in scanning software from the system preferences menu.
BUT: I cannot use HP scan at all! Every time I attempt to scan a document, it tells me a dialog that says:
"HP Photosmart 7520 series-AirPrint is currently unavailable. Please check if it is turned on and connected, or try again later."
I don't get it---I can connect and scan just fine using NON-HP scan software, and this is the latest software/driver kit. I really like HP scan for its wireless and editing abilities, and am very frustrated! How can I fix this?
Thanks!

SunShyne
I think that did it! I missed a step in your previous explanation. Will see if it holds. I'll report back here if it loses it again, bot all good for now.
Thanks

Apple Airprint to HP Officejet 6500A Plus via Wired Connection to Router

Hi There,
So I've done a considerable amount of research into this across the internet and this forum and I'm still struggling to find a satisfactory solution.
I have an HP Officejet 6500A Plus connected by ethernet into my BT Homehub 3.
It is my understanding that even though this is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet over through the airprint facility.
Unfortunately this is not the case. I only get the "No Airprint Printers Found" message on both devices. The only way I have managed to get my Mac Pro (Mavericks) to connect was to mannualy add using the IP address for the printer.
Can anyone give any guidance as to what I might be doing wrong? The printer is definitely connecting to the internet as I can print from my iOS devices using HP ePrint app for iOS.
Some might say well what is the problem, just use the HP app but this is not point. I believe if something has been implemented to make things easier then use it. I chose this printer specifically for this functionality so it's a little frustrating to find it so difficult to achieve the desired results.
Hope it's something straightforward and someone can help.
Thanks,
Steve
This question was solved.
View Solution.

Further to this request, and reading many more similar issues, I think I may resolved this.
I am not 100% sure but I have read some threads suggesting there are issues around BT's Homehub 3 and bonjour so this may be an issue.
I have tried the following over the past couple of days...
1) Completely reset my router (wiped all settings and started again) - No luck!
2) Tried changing from WPA2 to just WPA security - No luck!
3) Tried forwarding the bonjour ports to the printer - No luck!
4) Switched off router, printer and all iOS devices then powered back router, printer and then iOS devices - Printer appears on iOS devices but when print was selected, iOS device repeatedly returned Printer Not Connected error.
Finally, what seems to have done it (at least for now) was...
1) Unplugged ethernet from the Officejet and set it up as Wireless connection.
2) Powered down router, printer and all iOS devices then powered back up in the order stated earlier.
3) So far I have tried printing an email and a web page from my iOS devices and both have been sucessful.
Incidentally I had been struggling also to airplay from my iPhone and iPad until I started messing around with settings above and now this issue also seems to be resolved.
Due to variety of combinations (different printers, routers etc) people will have, it seems to be quite difficult to find a solution which addresses an individual problem however I hope some of my experimenting and findings might help others in some way.

HP Photosmart 7520 all in one showing Air Print Macbook Pro Maverick 10.9.4

At one point I did not have Air Print showing beside printer in system preferences. Printer and scanning is working fine, but I was told by someone on this message board that Air Print should not show. How do I remove Air Print. I have a Macbook Pro Maverick 10.9.4. HP Scan version 4.1.1. I did an update earlier this year and the Air Print was not there. Did not see board for Mac to choose for issue. Thanks for your help.
This question was solved.
View Solution.

Good morning, happy Friday @ladybugs48
I understand you are seeing AirPrint next to your printer, meaning you are currently using the AirPrint driver and not the HP driver. I can help you change this. Please complete the steps below;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
When you add the printer, to ensure you are using the HP driver, not the AirPrint driver use the steps below;
Select Add Other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer driver
Please let me know if this resolves the issue. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 8600 N911a not able to air print since Maverick update

My Officejet Pro 8600 N911a worked fine printing wireless before the newest Maverick upgrade. Now it will only print one print job after I turn the printer off and then back on. If I connect the computer to the printer, it seems to work fine, so it has to do with the upgrade and airprint. I have just downloaded the current Mavericks plug in, but there is no change.

When you say Airprint, are you printing Wireless diect to the 8600 or is the 8600 connected to your wireless network?
When you say the latest plu-n, do you mean the update from Apple Software Update (Apple Store) or the full 10.9 solution from HP.com?
In either case I would recommend first just deleting the print queue on the Macintosh and re-adding it. If that does not resolve the issue try resetting teh print system and adding the printer back new.
Try performing a "reset print system" on teh Macintosh and then reconnecting to the printer.
To reset the print system perform the following:
1. Open System Preferences
2. Click on the Print & Scan
3. click or click in the box listing the current print queues.
4. Select Reset printing system...
5. Enter admin User Name and Password
6. Reboot the Macintosh
7. Try setting up the printer again
I work for HP

When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
MacBook Air (mid 2012), OS 10.10, HP Officejet 7500a

This is what appeared on Console:
11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
timestamp: 12:42:32.557 Wednesday 12 November 2014
process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
#exceptions
11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
Not sure what any of this means.

How to set up AirPrint in iPhone 5?

Hi,
i want to use Printer on iphone 5 but i am not sure how to set up, i cant see any set up function in settings. as far as i know, printer must be conncected with same wifi.
Please help me to set up Printer in iphone5.
Thank you
Pritesh

Either the support document cited above is in error or (more likely) has just not been updated for IOS 8.
It states that:
AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
I have an early HP LaserJet P1102w and found that it can be set up to work wirelessly even if it is connected by USB to either a MAC or Airport/Time Capsule.
The trick is to install it each way and label each in the system preferences accordingly, (a separate icon for each version)
Examples: the wireless HP P1102 - Air Print, the USB cabled HP P1102w - USB, and the Airport/TC HP P1102w - Airport (or TC or LAN name)
My iPhone 5s also found the HP1102w using AirPrint.
Additionally the wireless printer connection will display the printer Options and Supplies just like the USB wired connection -- the Airport/TC connection will not.
So even if you use the USB/Airport/TC route, you can still quickly switch to the wireless or USB to check the toner (or ink)
Hope some find this useful.
Equip:
HP P1102w (with latest firmware update from HP)
MacbookPro & Macbook Pro Retina (both running OSX 10.9.5 - Mavericks)
TimeCapsule (latest Airport Utility & Firmware)
iPhone 5s ( iOS 8.0.2)

How do I change my AirPrint settingS?

How do I change my AirPrint settings - from colour to black and white etc..

Hi, I am having the same issue. I need to compeletly change the account on my mac. I am on The OSX Mavericks.

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I've upgraded to Mavericks. HP Scan no longer works to scan images from an HP Photosmart c309a yet the printer works. My Mac does not recognise this scanner as a scanner, only as a printer. How do I get my applications such as Preview to use this scanner?

I've upgraded to Mavericks. Formerly HP Scan we used to establish communications with an HP Photosmart c309a all-in-one printer/scanner on my wi-fi network. As of the Dec 2013 update to Mevericks, it appears that HP Scan is now disabled and I cannot find this device as a scanner in System Preferences. I cannot connect to it in either Preview, Pages, or Photoshop Elements 8. Does anyone know a way of getting the OS to recognise this as a scanner?

How was the printer added? Using AirPrint or the HP ppd? Since Mavericks defaults to adding an AirPrint printer with the AirPrint ppd, it might be necessary to add it again with the HP ppd, after making sure you have the HP drivers installed.

Printing problems after updat maverick

After update to maverick mine hp deskjet 3070a ,cannot print wirelessprinting anymore.the AirPrint is not in the list and, bonjour printing is not in the list *** Well Before i update the printer was working allright with wireless connection. No problem what so ever. I can only choose USB printing. Can you please give me Some advice.

I have the same idential issue with a HP Laser Jet Printer P1100/P1102w... If you tick the netwrok printer sharing box on the USB connection the Bonjoour printers show up then almost immediateky dissapear? Only on a few occasions do they remain stable enough to click on and add, however it fails to support AirPrint and will not print over WiFi... it does not pick AirPrint as the driver on AutoSelect and even if I select the printer driver manually it still will not print over WiFi... USB is fine however. I have reset the printing system, I have done a WiFi card reset, I have done all the troubleshooting I can do but still there is an issue? Is there anything else I can do?
I will be getting HP support to remotely shoaddow my Mac in an attempt to get a successful installation however I suspect the issue will persist? All the Apple Updates are done and also the current drivers are installed. I suspect this is an Apple Bug that needs to be fixed asap? It is a brand new HP printer that is supposed to support AirPrint...Very frustrating Apple?

C3180 prints only in black on OS X Maverick

Hello guys,
I just bought a new Macbook Pro i7 A1398 and the new OS X Maverick, I can changed my desktop or my laptop but never my (precioussss) printer All-in-One C3180. I just pluged in my Mac and the system recognized it but the printer prints only in black, no colors and bad dpi.
Second despair: I'm very dissapointed that have no Central Solution of HP. It's that true? :-( Newbie on Mac
This question was solved.
View Solution.

Hi Fael78RJ,
Welcome to the HP Support Forums! I see you have recently upgraded to a MacBook Pro running the new Mavericks 10.9 Operating system. You are not able to print in color with your HP Photosmart C3180, your prints are coming out in black and white only.
Now because you are using the Mavericks OS X you must install the printer using the Apple Updates. Please click on the link below, this document explains how to install the print driver on a Mac for a USB or a network connection. The OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU). Additionally, you can perform basic print jobs using AirPrint without installing a driver.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Once you have installed the PS C3180, you may notice the features you once had are limited or there are workarounds such as not being able to access the Solution Center (yes I am afraid this is true), for scanning with or without HP Software see below:
How to Scan: OS X v10.9
Are you now printing in color? I hope this helps! Let me know the outcome!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Airprint in maverick??

Similar Messages

Maybe you are looking for