AirPrint - iPhone 5 can not find printer after router change

AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

I'd look to HP for support.
Here's an HP Airprint-related trouble-shooting page:  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
Lots more info on the HP support site.

Similar Messages

  • My iphone can not find my router

    Hi!
    What am I doing wrong. My Iphone can not find my wireless router and I know, that I write the password correctly, when it's asking for it.
    It comes back with the message: Can not establish connection to router.
    Please help me.
    Regards
    Lonni

    This is happening to me too (sorry I am not an answer)
    Mine worked fine and then I begun to notice that the wifi had dropped. I initially could reconnect in wifi settings but now it says 'not connected' and is stuck in a loop of looking for a wifi but not ever finding one.
    I have tired rebooting and reset network settings, I even bought a new up to date router.  The router powers another iphone in the house asn various outher apple gadgets like ipads so I doubt the router is at fault.
    I am begining to suspect a hardware problem, I hope not as it is out of warranty
    Any ideas?

  • My hp cm1415 fnw color mf printer responds to laptop via air print but iphone4 can not find printer.

    How do you connect iphone4 to hp cm1415fnw color mfp using air print. Printer works via airprint from laptop using windows. iPhone can not find printer..

    check if your phone and printer are updated to the latest version.

  • My iphone can not find the wifi networks

    my iphone can not find the wifi networks

    Is your router plugged in?  Do you have internet?
    Come on...
    I have the same issue.  Yesterday I could connect to my wifi just fine, but today I turned on my wifi and the wheel just spins and spins.  I restart my phone and I get the "greyed out" wifi switch. So I restart, and I'm back to square one.  The wheel just keeps spinning.
    I've updated the router firmware, I've power cycled everything multiple times, and still nothing.
    Can anyone give a real solution? Or do we just have to suffer until apple update this **** IOS6?

  • Can not find printer from computer hp officejet pro L7780 all in one

    I just recently tried to print and my printer can not be found I do not have the disk that came with the printer it is lost  and it keeps telling me it can not find printer 
    This question was solved.
    View Solution.

    What operating system?
    Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printer software will not finishing loading/can not find printer

    received a Canon MX922 as a present. Attempting to connect and install printer to my HP Pavilion 17 notebook.
    The software stops loading in the final 2 to 3 minutes of completion. Using printer on my wireless network.
    All messages say can not find printer!!

    Hello rewing45,
    Welcome to the HP Forums.
    I see that you are having an issue with installing your Canon printer on to your Windows 8 computer.  I see that the computer is an HP.  I suggest that you contact Canon for installation instructions.  They will troubleshoot the printer on the Operating system NOT on the make of the computer.
    Here is the link for Canon Support.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can Not Find a Way To Change My Restricions Passcode

    Hey Anyone:
    I can not find a way to change my restrictions passcode short of restoring as new!
    Is this just an Apple oversight?
    Any clues appreciated.

    Hello yetti41,
    settings>general>restrictions>enter passcode>disable restrictions>enter passcode>enable restrictions>enter new
    passcode>re-enter new passcode
    Happy Computing,
    A

  • My iPhone 4 can not find network after updating to 7.0.6

    my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

    iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

  • Can not find sim after updating to ios5.1

    I just updated my iphone4s to 5.1 using itunes but now iphone says can not find sim card. What the problem?
    By the way, my phone is from ATT.

    Did you choode to delete them or save them when updating? In the finder go to your Movies folder (or the root of an external drive with projects/events) rt. click on the library icon, show package contents...   do you see your events/projects in there? See this link:
    http://support.apple.com/kb/HT5958
    http://fcpx.tv
    Help?

  • HT4356 Can not find printer Epson wf-2540

    Will not find the printer. Epson app finds the printer and prints but must go thru the app instead of AirPrint

    Try rebooting the ipad, any maybe your router as well
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options

  • Hp Envy 120 printer - Help! Hp Utility - Setup - can not find printer over wireless

    Hi all,
    I am in desperate need of help - I am running OS X 10.9.1 and have downloaded Mavericks update to support the printer.  However, during the Utility Setup, the printer can not be located by the tool.  I have also tried to manually type in the IP address and that does not work either.
    Prior to 10.9.1 upgrade, everything worked fine.
    please can you help?
    Thanks

    Hi @dBurnet1T,
    Welcome to the HP Support Forums! I see you have recently upgraded to the Mavericks 10.9 Operating system and you are unable to connect your HP Envy 120 to your computer, the Mac does not see your printer.
    I would like you to start here: 'Unable to Find Printer' Error Message Displays on the Computer during a Wireless Network Installati..., once on the page please select the Mac 10.8 section and follow the steps listed.
    Once connected, if you find the Envy 120 is not maintaining the wireless connection, you can complete the steps listed here: Printer Does Not Maintain Wireless Connection
    Please let me know the outcome, I look forward to hearing from you.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I can not find printer code on hp 8600pro ,which item is it on the network conf. page

    wind vista,hp officejet pro 8600. tried the find printer code ,in setup no :web Service: icon to choose

    Hello gator68,
    The Web Services icon should be located on the printers home screen on the display. It should be located across the top bar and look like a piece of paper with circles behind it. You should be able to select this and follow the onscreen instructions to enable Web Services and print a registration page (as long as you are connected to the internet).
    If you have any questions you can reply to this post and I will try to assist you further.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Iphone can not find time zone automatically (facetime, imessage)

    Hi all,
    I am using my old iphone 4 like a ipod, only for imessage, music, and facetime...
    but after adding other apple ID on it, Imessege and facetime are not working properly. I deleted one of IDs and tried but still not working. After serious research on this kind of issues, I found time zone is not able to set up automatically and I think this is the key factor.
    Does anybody know this issue?

    Maybe the FT app or s/w part was omitted from the iPhones sold in SaudiArabia when you purchased them.
    But,
    I have an iPhone5 bought in the US.
    Currently I am in Saudi Arabia and I use FaceTime everyday to talk to my girlfriend.
    In India I found that FT does not work when on 3G, it works only over WiFi.
    But to my delight, in Saudi Arabia FT works on 3G as well.
    Then, a month ago, I bought a new iPhone5 for my friend in India.
    FT was available on the phone and we used it in India.
    As I did not open the box in SaudiArabia, I am not sure if FT on the phone I purchased in Riayadh works in Riyadh.
    Iam pretty sure that FT work on phones being sold in Riyadh now-a-days.

  • Can not find print queue

    I sent a label print job from my Mac Mini to a Dymo 300 label printer. Job was wrong and I could not cancel or find print queue. Mac help said, printer icon will appear on dock while printing (does not) to click and stop or delete from there. Tried going into applications/utilities/printer setup/ and thats not there either. Do I have to reload Mac software? I reloaded latest version of Dymo program and drivers to no avail.

    With the printer setup Utility- double clicking on the printer that you are concerned with will bring up a new dialogue box for that printer, showing various controls as well as the print queue for it.

  • Can't Find iLife after Password Change

    I bought a used MacBookPro with OS X 10.5.6 installed fresh. On initial startup I set up my Account. The computer wouldn't recognize any passwords initially. Had to change Administrator's Password. Prior to this iLife applications were on this computer. After changing the Administrator Password they don't show up. However, when I try to download updates of them it won't do anything because it says a newer version is already on the computer -- which makes me think that iLife is still on there, but I can't find it. I only have the OS X 10.5.6 single disk which does not contain iLife on it to try and re-install. Can anyone offer help?

    Spotlighting iLife doesn't find anything on my computer -- which is so odd. Unfortunately this used computer only came with the MacOSX single disk (which BestBuy pennied out to me). The original owner did not return any disks with the machine (Original OS was Tiger?). I'm a little afraid of buying iLife that when I try to load it, it won't, because for some reason my computer thinks I already have it. Guess I'll have to risk the 79 bucks. Thanks.
    Message was edited by: Emmit8151

Maybe you are looking for

  • Creative is Getting Bigger in my Sch

    i noticed this in the middle of last year and more-so this year. More people are carrying Zens around at my school than i've ever seen. at first i thought it was a couple smart people protesting against iPods, but now im starting to think that zens a

  • Hello I am having a problem to open where I have to insert the CD on my desktop what I am doing wro

    wrong  Operating system HP Windows mode # 310-1126

  • Primary key voilation

    A function in my application first empties all the tables using "DELETE FROM <tablename>" and then imports a dump. The problem is that it is giving me "Oracle error 1, primary key voilation" on a table although there is only 1 record in that table. A

  • Lightbox slideshow opens by itself after closing

    I have lightbox slideshows on a page and after I open them by clicking on a thmbnail and then close them they start opening again on their own without me clicking on a thumbnail.  This started happening after the latest update.  Is this a bug?

  • Moving Photos around  inside an "Event"

    I am having trouble moving my photos. I would like to have a certain photo at the beginning, so it will show in the Event window, I would like to be able to put the photos in ANY order I like within the Event window . When I try to do it in "Photos"