Airprint on Epson 211

Hi, I wanted to buy an EPSON XP 211. will it support airprint? it says it has wifi though... thanks =)

As listed here, the Epson XP-211 does not support AirPrint.
http://support.apple.com/kb/HT4356

Similar Messages

Printing Photos with AirPrint to Epson Px730Wd produces white edge

All,
I have just bought a new Epson PX730WD and have a small problem when printing photos via AirPrint. I always get a 3mm white edge on the right hand side of my photos. Printing the same photo from Epson iPrint app works fine and it works from my PC as well, but using AirPrint via the native photo app always produces this white edge. Very annoying as I prefer to use the native functions when available, but cannot be doing with this edge.
Any ideas?
Thanks
Chris

I have contacted Epson Support and they told me to try the iPrint app which I did and it worked fine. So the problem seems to lie somewhere between airprint and the printer recognising what is being sent via airprint. I can't find an Epson forum where these type of issues are discussed. I was hoping someone else may have an tried airprint with a PX730wd to see what results they get.

HT4356 Problems Airprinting to Epson Workforce 4020 from IPad2

Airprinting to a brand new Epson Workforce 4020 inkjet printer from my IPhone4 works great, but from the IPad2 I get a 'out of paper error' message displayed on the IPad screen and the 'out of paper' light turns on at the printer - all devices have the latest firmware/OS and there is plenty of paper and ink in the printer. The Epson iPrint app on the IPad2 works fine. The printer is advertised as airprint compatible. Printing prior to and after the error message from PC's or other devices works fine.
Any suggestions for troubleshooting? Below are snaps from the IPad showing the print-related services -

Region settings are identical on the iPhone4 and the iPad2
With the same webpage (I used the classic Google page), both the iPhone4 and the iPad2 print fine from Safari.
With the same picture, I get the 'printer out of paper' error message on both the iPhone4 and the iPad2 when printing from Photos.
It now looks like a limitation of airprint and/or the Epson printer at this point since both IOS devices give the same behavior. I guess I'm stuck with third party solutions for most printing (e.g. iPrint from Epson) ?

AirPrint to Epson WorkForce 545

I have a Epson WorkForce 545 that supports AirPrint. While initially I had no problem with any of my Apple devices printing to it via AirPrint, I now have a recurrent problem of them sporatically "not seeing" the printer at all. If the printers is in sleep mode, I have to turn it off and on before my devices can discover it. I downloaded the latest driver for it and it seemed to work, for a while, now it is back to not printing. Very frustrating.
JeffH46

Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.

How to AirPrint with epson we 4530

I can print using the epson controller for printing but cannot seem to connect directly using AirPrint.

That does not appear to be an AirPrint compatible printer: http://support.apple.com/kb/ht4356. You can either keep using the epson controller or an application like Printopia or Print N Share.
Message was edited by: deggie

Airprint with epson

I have an epson stylus tx610fw how can I use airprint on my ipad4 with this printer

The reason you can't is because the Epson printer you own is not Air Print Enabled (see the list in the attached link):
http://support.apple.com/kb/ht4356
You can either buy a new printer (the 430 is Air Print ready), or you can buy a printing app in the App Store for about $9, such as Printopia or Print Central, which both work well.

HT4356 Airprinting on epson xp600

This printer is supposed to be AirPrint ready but neither my iPad or iPhone recognize it as an AirPrint option. What's the trick to getting it to work?

There are some troubleshooting steps here: http://support.apple.com/kb/HT4356?viewlocale=en_US&locale=en_US
Check using the panel on your computer to be sure you have the latest firmware on your printer and update it if necesssary.
Make sure the printer and iPad are connected to the same network.
Reset the iPad (hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons), the printer and your router.

Why does my Kodak printer not work with yosemite?

ever since upgrading to yosemite, my kodak printer will not work. i got as far as being able to download a software update but still no joy.

My kodak 5250 would not print and I tryed the termial with no luck and then i received an email from nowater and turn on Bonjuor in safair and now I am printing i did not enter the ip address of my printer
heres the email
I decided to poke around in the Epson settings via the web interface. To do this, just enter the printer's IP address in a browser that's on the same network (you may have to skip some HTTPS / certificate warnings). From there I looked around until I found Wi-Fi/Network Settings / Services / Protocol. On my system, Use Bonjour was unchecked. I had seen in other people screenshots and videos that when the Add Printer tool works, it shows that it connects via Bonjour Multifunction, so I enabled Bonjour and saved the settings. After waiting a few minutes for the settings to be applied, I was able to add the printer via the Add Printer Default tab (I did change the "Use" setting from "Secure AirPrint" to "Epson WF-3620 Series" option -- I think this is the Epson specific driver).
I don't know if Bonjour is disabled by default or if I turned it off somehow in the past and forgot, but it's an easy enough fix that might work for someone else so I thought I should share.
OTHER posible solotion
Go to Spotlight, then enter Terminal and press Enter.
The terminal window/program opens.
Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
Enter your system OS login password when prompted.
Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
Enter sudo launchctl stop org.cups.cupsdYour screen will look similar to the following:
no updated drivers at this piont

Printer not connected error in 10.10.3

I'm getting "Printer not connected" now since I've upgraded to 10.10.3 on my Epson WF-3540 on my MBPr. My two other Macs are not having this issue, one of which is also 10.10.3 and the other 10.10.2 (a MacPro and MBP respectfully).
I have tried the following on my MBPr:
Delete Jobs
Pause and restart queue
Restarting Mac
Restarting Printer
Resetting Printer
Delete and reinstall printer - Both via AirPrint and Epson drivers
Reinstall fresh downloaded drivers
Repeat 6 with new driver install
SMC and PRRAM reset
Printer can be seen easily in printer control panel for setup. Setup proceeds normally. Then when attempting to print, the queue displays "Printer not connected" error.

If the printer works with AirPrint, you don't need the EPSON software and you should remove it. Then see below:
OS X Yosemite: Reset the printing system

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!

It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

IPad 4 prints small on Epson airprint printer

Either by using Airprint from Safari or either Airprint or Google Cloud Print (GCP) from Chrome yields an A5-sized printed in the top/middle of the A4 page. I'm trying to print a pdf in A4 format to an A4 page.
All settings are correct as far as I can find. There's nothing to control anything size-related in Airprint, GCP has settings for papersize and enlarging and such which are all set to normal. Changing them doesn't help anyway.
I'm getting everything at quarter-size.
All other printers and even the Samsung Note tablet print fine. Everything is wireless on the same network. Printer is an Epson WF3540***. In the config of the wireless section there's nothing to control page output.
Is there anything I can do? My iPad is a 16Gb so it's rather strapped for memory. I'd rather not get another app to control something that shouldn't be happening anyway.

Apparently the problem was temporary.
Although I had this problem before, this time it was 1 .pdf that only printed to a quarter of its size from the webpage in Chrome using either Airprint or Google Cloud print (GCP). This pdf was generated by a form in that webpage. Printing in GCP, paper size was set to A4, no enlargement was specified and it was set to fill the page, but it still only printed A5 size on an A4 sized paper. Of course none of that can be specified in Airprint. After saving it to iBooks it did print well.
Other pdf downoaded in Chrome did print fine from Chrome using both Arirprint and Google Cloud Print.
So I can't isolate the problem well enough. This topic may be closed.

HT4356 I have just updated my Epson printer to one which supports air print but consider it to be a waste of money as my printer has two paper trays and there is option to choose which try...just "print" How can I print photos via AirPrint from photo tr

Hi,
First-timer on this...Just updated my printer which was less than one year old, to one which had Air Print capabilities. This one is the Epson XP605 which has two trays, one being for photos. Each time I tried to Air Print a photo, it printed from the A4 plain paper tray instead of the Photo Tray.Twice...then I came into my study and changed the printer settings to Tray 1 (photo tray) Photo paper, size 5x7 and Photo Best, but still it printed on plain A 4 paper. Would be most grateful for any help, although I did read on one Apple site that AirPrint may not be able to choose trays!!!! "may not"?? Thanks

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Spooling a job to an AirPrint enabled printer is extremely slow (HP or Epson)

Spooling a job to an AirPrint enabled printer is extremely slow (HP or Epson).
I am a technical support person for the CEO and other executives of a large corporation. I've set up AirPrint capable printers in several homes and seem to be coming across the same issue in a number of these homes. More often than not (the issue is intermittent) when I try to print something from an iPad or iPhone to an AirPrint enabled printer it takes almost a minute for the job to spool. It doesn't seem to matter how long the document is either as the same thing happens whether it's one page or ten. At times the iDevice cannot even find the printer even though the WiFi connection is excellent and the network is functioning properly. We have tried HP and Epson AirPrint devices and it happens to both. When printing from a laptop wirelessly over the network, we do not experience this issue so I don't think it could be a network problem.
In any case, the network setup in these homes is fairly simple. We have a wireless router, a gigabit switch connected to that which feeds various rooms throughout the home. The rooms have Ethernet connections and we have APs set up in some of the rooms to ensure full wireless coverage. In a few of the older home we use PowerLine APs to expand the network.
I've seen others with the same issue but have yet to see a fix. We've tried updating the firmware on the printers, routers and APs but nothing has helped.
HP Printers we've been using: PhotoSmart 7520, OfficeJet 6700 Premium
Epson: Stylus NX430
Does anyone have any other advice?
Thanks,
Paul

Once the job hits the printer it prints immediately. It's right after you tap Print on the iPad that takes a long time. There is a box that pops up saying that the job is being processed (don't remember the wording exactly). Once the box disappears it also takes a bit of time for the job to hit the printer.
The actual process of the printer printing is normal.
Also, in some cases the iPad won't even see that there is a printer connected to the network even though the printer is powered on, online and the iPad is connected to the home network. Usually a reboot of the printer fixes this problem.
Thanks

I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print. What is AirPrint & how do I connect to it?

Patti-
Is your Epson printer on Apple's list of AirPrint capable printers? See <http://support.apple.com/kb/ht4356>.
If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
One other possibility is that there could be a print job stuck in the iPad's print queue. Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen. Scroll across and see if the Print Center is there.
Fred

My iMac is printing duplexed documents on a wirelessly connected Epson printer extremely slowly (minutes), but prints fast from and IOS device using AirPrint. Settings don't offer any help. Can anyone advise, please?

I have a one-year old (intel) iMac, now running on Mountain Lion. I have a wireless network with an Epson Photo Stylus PX830FWD printer which has an auto-duplexer. My problem is that when I print a two-sided document, the print takes minutes rather than seconds. It prints at normal speed if I use the print facility on my iPad or iPhone (AirPrint), which suggests that the Mac settings are at fault. I have been through all the settings on System Preferences that I can find, but nothing makes any difference.
I didn't notice it prining at slow speed on Snow Leopard or Lion OSX!
Any suggestions, please?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Airprint on Epson 211

Similar Messages

Maybe you are looking for