Airprint unable to find HP Laserjet 1536dnf via Zyxel P-660HN-F1z

Airprint is very disappointed. I recently baught *HP Laserjet 1536dnf* *which Apple and HP says it is Airprint enabled* only to find that it doesn't work. And I think both Apple and HP may blame it on Zyxel but the one who is frustrating is a customer like me. If anyone can help me ... please.
_Here's my configurarition._
Device: Macbook pro, HP Pavilion, iPhone 3GS (iOS4.3), iPad 1 (iOS4.3)
Printer: HP LaserJet 1536dnf (latest firmware 20101125)
Router: ZyXel P-660HN-F1z (latest firmware Version: 3.70(BJI.4) | 03/22/2010)
Network Setting: All are in the same network 192.168.1.x
_Here's my problems._
Printer works fine with notebooks (wired) but not iPhone and iPad (wireless). I have tried many settings and after rebooting my router and printer I will occasionally be able to print from either iPhone or iPad but never from both. Most of the time, iPhone and iPad show "unable to find printer"
_My tests were._
- Update all device to latest firmware
- Reseting router and printer
- Deactivate my firewall
- Setting my printer to a fixed IP
- Setting log in my router (and I don't understand it!)
- etc
None of them works.
I guess I may have to do something like openning port for Banjour or some apple services on my router but I really don't know what to do or how to do it.
I'd appreciate if anyone can help or *share the router setting* that works for your airprint.

Though I cannot really understand your language, I guess it'd be the same that I just found out today. Anyway, thanks to DaniSan77.
In summary,
1) I reset my Zyxel router to make sure that I didn't make any unnecessary changes. (you may try below first before reseting yours).
2) Under Zyxel menu Network > LAN > Advance Setup, I change the Multicast to IGMP-V3. This time I leave other fields untouched, so RIP direction is set to None and RIP version is N/A.
3) Under menu Wireless LAN > Advance Setup, I uncheck the IGMP Snooping.
4) Turn on my HP printer and reboot both iPhone and iPad
Now I can print normally from mac and pc and also print from iphone and ipad via AirPrint.

Similar Messages

Airpint cannot find HP LaserJet 1536dnf MFP- Please help

I baught HP Laserjet 1536dnf a few months ago cause HP said that it is Airprint compatible. I actually went to a few stores just to get this last one in stock of the last store I visited. Till now, I still cannot get it to work and feel like a dumb buying this HP printer. If any of you or HP engineer can help ... please.
I actually did some research and testing on the configuration. There were few time that I was lucky to see the printer show up (shortly) and I can print one document and the printer is gone. Both my ipad and iphone cannot find it again afterward, even after rebooting.
I already updated my iOS to the latest version. Upgrade firmware on both Printer and my Zyxel router. Also, I replace the zyxel router with 3com (now back to zyxel). None of these help.
_Here's my configurarition._
Devices: iPhone 3GS (iOS4.3), iPad 1 (iOS4.3)
Printer: HP LaserJet 1536dnf MFP (latest firmware 20110405); Fixed IP;
Router: ZyXel P-660HN-F1z (latest firmware Version: 3.70(BJI.4) | 03/22/2010)
Network Setting: All are in the same network 192.168.1.x
Would really appreciate if anyone can help me out.
This question was solved.
View Solution.

Thank you all, especially headsortails. Thought no one will answer this after so many months.
I actually check that link (http://gothick.org.uk/2010/05/16/getting-the-apple-iphone-remote-app-working-with-a-zyxel-router/) before but it didn't help me at the time. Now there are a few more replies that enlighten me.
I would summarize what I did as follow; for others who may have the same problem.
1. Turn off my printer HP1536
2. Since there were so many things I tried and lost track of them e.g. multicast, IP version, fixed IP address, disable firewall. First thing I did today is to reset my Zyxel router and set up things from scratch (not from the configuration backup).
3. Under Zyxel menu Network > LAN > Advance Setup, I change the Multicast to IGMP-V3. This time I leave other fields untouched, so RIP direction is set to None and RIP version is N/A.
4. Under menu Wireless LAN > Advance Setup, I uncheck the IGMP Snooping.
5. Turn on my HP printer and reboot both iPhone and iPad
Now I'm happy. I can print from my iphone, ipad, mac and PC. However, while testing, I found that sometime iphone may not found the printer if the ipad app printed something and hasn't quit. I guess it somehow lock the bonjour service. Anyway, I'll just mainly print from my ipad ... so I guess my problem is now solved. Thanks.

'unable to send print data' on HP Laserjet 1536dnf MFP

Hi there,
I'm running an iMac with OSX 10.6.8. Via an USB cable I have attached a HP Laserjet 1536dnf MFP to the iMac.
I also use this printer to print via wifi (i.e. through the iMac) with my MacBook Pro (with OSX 10.7.3).
Suddenly today the printer stopped working via my MacBook Pro. I get an error message: 'unable to send print data'.
I have checked my antivirus etc., but that does not appear to be the problem. I have also updated the firmware of the printer, without success.
Can somebody help me out? Is the OS difference the problem? But until today that hasn't been a problem.
Thank you very much! Regards, Luc.

Hi jemenake
I understand you lost connection with the network for the Laserjet 1536 through ethernet connection.
Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. The router might not be finding the printer on the network.
If this doesn't resolve the issue continue to the next steps.
Print a configuration report from the LaserJet 1536dnf.
Press the Setup button, (the one with the wrench on it)
reports, press OK, Config Report, press OK.
Check to see if the ip address is valid.
If you have a valid ip address then delete and add the printer on the mac, the driver might have become corrupted.
Delete printer on mac.
Click on the Apple, click System & Preferences,then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),highlight your printer name and click the button on the bottom left corner of the screen.
Add printer on the mac.
Click on the Apple, click System & Preferences, and then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),click add a printer, then select the printer from the list, make sure the printer listed beside use or print: shows proper printer name and not airprint, (airprint is a preinstalled apple driver with basic funtionality if on 10.8) add it in.
If the ip address is not valid please let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Using AirPrint with Laserjet 1536dnf?

I have an HP Laserjet connected via USB to a Trendnet TEW - MFP1 Print Server (latest firmware) connected wirelessly to the latest model Airport Extreme.
All features work flawlessly with the exception of AirPrint from my iPhone or iPad devices. I cannot get the Airprint on my iOS to locate the printer.
Help?
Jody.

Hello claasckohl,
I am sorry that you are unable to use AirPrint on the LaserJer CM2320fxi! As of now this LaserJet model does not support ePrint. Customers that want to use AirPrint must have an ePrint enabled printer. You can always check at www.hp.com/support for firmware updates that would enable Cloud Services on your printer. Below is a list of ePrint supported printers. Thanks!
HP Officejet Pro 8500A e-All-in-One Printer series - A910
HP Officejet 7500 Wide Format All-in-One Printer Series- E910
HP Officejet 6500A e-All-in-One Printer - E710
HP Photosmart c309n-s
HP Photosmart D110 series
HP Photosmart B110 series
HP Photosmart B210 series
HP Photosmart Premium C310 series
HP Photosmart C410 series
HP Photosmart Ink Advantage K510 series
HP Photosmart eStation e-All-in-One Printer C510 series
HP Envy eAll-in-One Printer D410 series
HP Color LaserJet Pro CM1415 Series
HP Color LaserJet Pro CP1525 Series
HP Color LaserJet Pro M1536 Series
HP Color LaserJet Enterprise CP5525
HP Color LaserJet Enterprise CM4540 MFP
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

Thought so - ace - find my phone really needs an unlock function. - another £40...

Hp LaserJet 1536dnf MFP will not copy via auto feeder

The printer will print and scan, and copy from the glass just fine too. The problem is when you want to copy from the auto feeder. You put the paper in and press copy. It feeds it through but nothing prints out.

Hey Columbus_ISD,
Thank you for visiting the HP Support Forums! I see when you attempt a copy from the ADF on your HP LaserJet 1536dnf MFP the output is blank, you are able to print copy and scan from the glass with no problems.
I would like you to go ahead and complete the following steps listed below:
1. Make sure the LJ 1536dnf is plugged directly into a wall outlet, DO NOT use a power bar or surge protector: Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
2. Update the LJ's Firmware:
HP LaserJet Firmware Update Utility
Are you now able to make a successful copy from the ADF? If not, please check your inbox. I have sent you a Private message on the Forums, go to your Userpage to the right of your Username you will see it there.
I hope this helps,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to find the default new form for list mylist1 - deploying the list instance via module feature

hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?

try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful

'Unable to find LiteTouch.wsf...' - after deployment via MEDIA/USB

Hey, and thanks for any advice in advance :-)
I'm having some problems when I deploy a captured image of Windows Server 2012, using a media located on a USB drive. After the deployment is complete, and Windows boots up, I get an error message stating:
'Script not found
Unable to find LiteTouch.wsf needed to continue the deployment.'
Additionally, when I check either of BDD.log and LiteTouch.log in the MININT folder on the deployed system, the following error message is shown,
'<![LOG[FAILURE ( 5212 ): Welcome wizard failed or was cancelled]LOG]!><time="08:15:10.000+000" date="11-26-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">'
Any suggestions to what might be causing this error to appear?

Are you removing the USB post boot? how are driver allocated and how was the USB media prepared?
Thanks for the specifying questions, I knew I was missing important information :)
- I'm not removing the USB flash drive, however that would have been an obvious fix.
- I have 3 sets of drivers: Nvidia graphics drivers, the newest HP z420 drivers (since I'm deploying to a HP z420), and a single HikVision driver, for some camera support.
The NVidia and HikVision drivers are both imported right into the 'Out-of-box Drivers', and the HP z420 drivers are imported into a subfolder under Oob drivers, called 'z420'. I have thought that the subfolder and the HP z420 drivers might have something to
do with this, but the same happens for another build, made for a HP z420 workstation, and this image only has the NVidia and HikVision drivers.
- The USB media is, after the image is created, prepared by:
Formatting the USB flash drive.
Creating a new media, located at the flash drive.
Setting up the properties of the media as wanted (e.g. no .iso boot image should be made, and selection profile for driver injection is set to 'everything')
Updating the media.
This creates a 'Content' folder on the USB, which contains three folders (Boot, Deploy, EFI) and three files (Autorun, bootmgr, bootmgr.efi). I cut out the content of the 'Content' folder, paste it to the root of the USB, and delete the content folder, so
only the three folders and three files are present at the USB.

Laserjet CP1217 - unable to find toolbox.

Having lost the installation disc, I have been unable to find a copy of the HP toolbox to download absolutely anywhere.
If anyone can help, I would be very grateful as I desperately need to carry out a "clean" of my printer.
Thanks in advance.

Thanks you for your reply.
However, if you actually look at the link you sent me, you will see that the Toolbox is not there.
That is the whole point of my post - the toolbox is not available on the HP website and they want me to spend £15 just to speak to someone about it.
I have written to the UK's CEO to complain about being asked to pay just to get a file that was on the original disk and I have now had three replies from them saying we can help you with your complaint if you call this number and pay £15 for support.. Really frustrating.
I guess I will just have to give up on getting this file. Fifteen pounds might not seem much but I can not justify spending that amount on what is a spare printer when such items are now so cheap to purchase.

HP Laserjet 1536dnf MFP Installation Error

I have an HP Laserjet 1536dnf MFP printer which will not install. I originally had Windows 7 OS and got the HP 1536dnf printer which installed fine. However, I started getting the upgrade to Windows 8.1 pop-ups, which I avoided specifically. However, I was typing on day when it poped-up to upgrade and didn't catch it in time and next thing I know we are upgrading to Windows 8.1 OS. What I didn't notice immediately after the upgrade was that my printer began to have trouble. So I uninstalled the printer and went to reinstall it from the disc and HP download, but it never re-installed. It always stopped at 99% and then gave a time error, something about to long to execute program timed out. I went to HP support via chat and wasn't able to get it resovled. However, I did somemore digging on the internt and found other people were having similar but different issue. Long story short, the Event viewer stated faulting application is PrintIsolationHost.exe and the faulting module name is hppdcompio.dll. What is this and is there anyway to get a newer version or replace the old dll with another one of the same vintage? I would like to get my printer fully installed so I can use all the functions again. I am currently using a default driver. Any help would be greatly appreciated. Thanks.

Hi wiserichguy ,
Thanks for providing that information.
In Desktop mode, press the Windows key and R at the same time, to show the run command line.
Type Services.msc and press Enter on the keyboard.
Scroll down until you see Windows Image Acquisition (WIA) and select it.
Make sure the service is started and set to Automatic. If the service is already started, stop the service and start it back.
Scroll down until you see Shell Hardware Detection and select it.
Make sure the service is started and set to Automatic. If the service is already started, stop the service and start it back.
Scroll down until you see Remote Procedure Call (RPC) and select it.
Make sure the service is started and set to Automatic.
Close the Services window.
In desktop mode, press the Windows key and R at the same time and type Services.msc.
Double-click Printer Spooler in the Services list.
Click Stop and click OK.
Navigate to "%WINDIR%\system32\spool\printers" from the Run Window again, right click on any document and left click to delete the job.
Then go back to the Run Window and type in Services.msc again.
Double-click Printer Spooler in the Services list.
Click on Start. In the Startup Type list, make sure that "Automatic" is selected and click OK.
Try updating the driver again.
How was the printer name listed in Device Manager?
Please let me know the outcome.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Cannot copy or scan from ADF (autofeeder) on LaserJet 1536dnf MFP

I've been a very pleased owner of a LaserJet 1536dnf MFP all-in-one printer, scanner, copier, fax. The device is running the latest firmware, it is connected via a hard-wired ethernet connection, and I use it mainly with my laptop which is connected to the same open network via wi-fi. The laptop is running Windows 7 32-bit with the latest drivers, utilities, and diagnostics tools installed.
The problem I started running into today is two-fold:
The copier no longer produces copies when feeding one or more pages into the ADF. In other words, the pages are pulled through and the display shows the status as "copying" but no copies are produced. Also, there are no errors indicated on the display.
The HP Scan utility no longer completes scans via the ADF for one or more pages. Pages are pulled through the ADF then the HP Scan utility presents a simple "An error occured while scanning" error message. I observed similar behavior when attempting to scan via the native windows applications (photo viewer, windows fax and scan, microsoft office document scanning, etc).
Regular flatbed copying and scanning still works without a hitch for 1 page at a time. I have been using both scenarios above for over a year without any issues. There have been no software installs/updates applied to my laptop in the time these issues surfaced. I have run the print, scan, and network diagnostics utilities from HP and they all show zero problems.
I have not been able to find any relevant info for either of the issues above via HP support or third-party forums. My hunch is that these are somehow related to a device firmware / hardware / configuration issue and am hoping to find some support via this forum. Appreciate your feedback in advance!
Best,
Igor

This is the side piece that was lifted. The feed tray was removed and I manually ran one page through with the copy button. Then put the feed tray back and affter that i was able to scan multiple pages with no problems.

[Solved] Hp Laserjet 1536dnf MFP only software

[EDIT] The issue is solved. My uncle called someone to fix the issue. He deleted one more printer related additional file. Unfortunately I do not have the name. After that he downloaded all-in-one file and succesfully installed printer. Sorry for the trouble.
Hello,
My uncle has Win 7, Ultimate, 64 bit (updated to latest windows updates)
installed via bootcamp on iMac
Have HP 1536dnf MFP printer installed via USB. No other HP product is installed.
I had issues which I managed to solve.
Problems:
Earlier the 'properties' window flashed and closed immediately. I could not solve the problem even after trying solutions offered in earlier posts. After few install, my installer would fail as it stalled at 99 %. Even if I killed installer via task manager, still I could not find any solution. HP toolbox FX could not be installed.
As usual, I removed all HP driver enteries from
services tab,
device manager and
somewhere in 'printers and devices' (afte rclicking / selecting any printer, on top bar, ther is an option to select driver).
I also removed HP folder form 'Programs x86' (my system is 64 bit). In programs folder, I found nothing.
I also checked for universal printer is uninstalled and
print sprooler is working and is set on automatic.
I had also upgraded firmware to latest 2014 version.
Windows update of 1536dnf always failed.
I run latest al-in-one installer from HP (210 mb)
All-in-one installer ...
With installer windows installer also installs software. I clicked on taskbar icon to see details. It searches for latest drivers of scan, print, etc on net and then installs it.
After 26-29 % HP installer, searches for 1536 printer driver (it can be seen on windows installer screen). When the installer reaches 29 %, it says
Installation failed. Messege is something like
Installation of HP Laserjet 1536dnf failed.
I kept the installer running. After it reaches 99 %, it hangs. After few minutes, it shows fatal error. I ended installer via talk manager, still software is not installer.
HP diagnostic tool identifies printer, but says, software is not installed and points downloads page, which is not of HP 1536dnf MFP.
There is one solution, which I have not tried. One post said to create a new user.
Half Solution:
Then I tried basic setup of print and scan driver PCL 6 without first installing software (which is latest available on HP website 2011 version) and ... it worked. Now I can print and he properties tab would open.
Also note that this is a 'universal Printer driver'--> all were suggesting that universal printer and print spooler causes problems
Still it's working fine, but without the software I cannot scan. I do not use photoshop.
Question:
My question is
The 210 mb installer will again install drivers. What will happen as in this case, I have already installed drivers and are working fine, but as mentioned, I cannot scan. HP scanning software gives good options.
Is there version available where only software is installed and no driver is installed.
Since 210 mb all-in-one installer always hangs at 99 % (downloaded 2 times and installed 7-8 times), should I try basic installer.
What will happen to preinstalled drivers?
The problem is that installed driver is a universal printer PCL 6
I will again visit my uncle on saturday.
Please help me. Thanks.
Kind Regards
White Lotus (WL)
This question was solved.
View Solution.

[EDIT] The issue is solved. My uncle called someone to fix the issue. He deleted one more printer related additional file. Unfortunately I do not have the name. After that he downloaded all-in-one file and succesfully installed printer. Sorry for the trouble.

Reset password for HP LaserJet 1536dnf MFP

I have a HP LaserJet 1536dnf MFP printer that I lost the code to administrate from the front panel. I have changed my networking configuration and need to adjust the settings, however I am unable to edit anything on-device without that password. Is there a way to reset the password? or worst-case reset the device entirely and start from scratch?
Thank you,
Tom

Hi @MITP-Tom,
I see by your post that you need to reset the password on the printer. I can help you with this.
Please check your private messages for the reset for the printer.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet 1536dnf don't makes copies

Hi, I have a HP Laserjet 1536dnf, last wekk every time I tried to make a copy I get a message on the pirnter screen that the pirnter is busy try again later, I alreade reset the printer to the factory defaults an nothing happened, please advice

Hi fxtapia,
Sorry those extra steps which I provided in the PM didn't resolve the issue.
We are going to try and isolate the issue.
It might be a issue with a job in memory on the printer, a Eprint job sent out or a job in the print queue causing this issue.
Disconnect the USB or Ethernet cable from the printer. (fax cables, phone lines)
Do the hardware reset again.
The printer should go back to a Ready mode.
Try and make a copy.
Let me know if the you were able to make the copy standalone.
Make sure the print queue is cleared out.
Windows 7 steps:
Go to start, Devices and printers folder.
Right-click the name of the product, and then click See what's printing .
Click Printer, then click Cancel All Documents.
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Then hook up the USB or Ethernet cable again.
Try and make another copy.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet)
Do you use the printer for Eprint and Airprint.
Thank You for your patience.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to find Bean and AM impl for customisation of Fusion Application

Hi,
Iam navigating through this link
under Fusion App --> Navigator -->WarehouseOperation -->REceipts --> and Entering createReceipt screen via Receive Expected Shipments. I want to default the value of packing slip as how supplier got defaulted but in editable mode. For this i want to know how supplier got defaulted and in same way i want to default Packing slip number.
But iam unable to find the managed bean or AMimpl java file for doing code change.
"Copylines" is default activity and from there it is navigating to CreateReceipt.jsff, i don't find any parameter carrying the value for Supplier.
So Logic must be either in Managed Bean or in AmImpl . I need to include my logic also here. But unable to find the necessary file.
reg,
Lakshmi.

While creating a receipt, you select one or more orders belonging to a single supplier and then create one receipt against that. And that is how the supplier field gets defaulted in the Create Receipt UI.
Packing slip is also defaulted when the user receives against ASN provided it is captured at the time of creation of the ASN.
For a regular PO receipt, the user is expected to enter the packing slip by default.
Can you describe your exact requirement in detail?
The customization framework does allow the value of a field to be overwritten but using this, you will always have a predefined value or some limited logic using EL.
But we would not recommend that because when you customize the value of a field, it will discard the value that is fetched from the database.
This can potentially break the default functionality of receiving where the packing slip is defaulted from the ASN.
And another question that I have is the need for the AM details - this particular code is present in the AM and not the managed bean.
Are you planning to extend the AM that is shipped by receiving?

Airprint unable to find HP Laserjet 1536dnf via Zyxel P-660HN-F1z

Similar Messages

Maybe you are looking for