AirPrint with ipad

How can I AirPrint with iPad?
Hardwares are - 1. Airport Express Gen 1, HP Laserjet P1606dn

AirPrint Basics
If you are unable to print, or if you see the message: "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
  If necessary, consult the printer documentation or contact the printer vendor for help with the above steps. 
Notes:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.

Similar Messages

  • Print via Airprint with iPad 3 and Canon MG5350

    Hi,
    I have a very common problem but none of the so far provided answers were suitable to help me. I use a new Canon MG5350 printer with WLAN and Airprint. The firmware has been updated to version 2 and nevertheless I cannot print via Airprint from my iPad 3 WiFi. My iPhone 4 finds the Canon printer without problems but the iPad keeps saying "No Airprint printers found".
    Who can help? As I said, I have updated the printer's firmware.
    Cheers
    Frank

    Hi Frank, I too have an MG5350 and ipad3 over wireless LAN. Printer is ace when used from my PC and laptop but got the same as you did trying to print from ipad. Tried Canon UK support but useless would be a compliment. Apple support in Cork suggested going to ipad settings, switch to airplane mode which stops wifi and then switch back again, wifi reconnnects and when I try and print, it finds the MG5350 and prints! Only one problem, leave it and come back after half hour and its back to "no airprint printers found" Doing the wifi on /off trick works everytime but have no answer as to why it is dropping it but still searching.
    Hope this helps a bit.

  • How to get hp3050a to AirPrint with iPad ?

    Have a new iPad have a new printer
    HP 3050a. AirPrint
    Cannot get to work
    Driving me crazy

    http://support.apple.com/kb/HT4356
    Key things:
    1. Make sure the printer is fully updated
    2. Make sure the printer and your iDevice are on the same network.

  • I can't find my airprinter with ipad

    since i changed my router (now sitcom 300N) my apple devices can't find the airprinter (HP). with my pc there is no problem this one finds the rpinter without any problems
    does anyone know what to do?
    (soory for my englisch but i'm from holland)

    it is running on the latest one

  • Will a CP1518ni color laser printer work with airprint with my iPad?

    will a CP1518ni color laser printer work with airprint with my iPad?

    Hi Ijergen,
    Yes you can use AirPrint as long as the printer is on the same network as the iPad.
    You can also try Google cloud, I will be giving you links below on how to go about it.
    AirPrint
    http://www.apple.com/support/ipad/assistant/airprint/
    Cloud print
    http://androidadvices.com/how-to-print-from-androi?d-phone-with-google-cloud-print/
    http://www.google.com/support/cloudprint/
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • AirPrint for iPad 2 with iTunes 10.2 ?

    i wanna know if i can airprint with itunes 10.2 and with window 7? if yes , how ? thx in advance!

    FWIW, I setup AirPrint for WIndows over the weekend. This is a free WIndows app that you install as a service on your Windows desktop/laptop. That then acts as an AirPrint server. On the iPad, when you come to select the printr you want to use, any printers accessible by the Windows machine apears and can be printed to.
    It is a bit fiddly to set-up but it worked fine for my network attached Brother laser. It's worth a go:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/
    Steve

  • HT4356 can i airprint to my airprint printer remotely, with ipad, from another wifi connection or only when i am within my own network?

    can i airprint to my airprint printer remotely, with ipad, from another wifi connection or only when i am within my own network?

    Air print, and the normal hp airprint set up requires that the pad and the printer be on the same wifi net work.  The 'connecting' is done by your router.  That means remote printing wont work with the out of the box stuff.  I think you might find some 3rd party apps that do support remote  printing, but i have not seen any reports from users that found a really good solution.  Print n share reads like it might work, i am sure some users will chime in.

  • Apple Products no longer AirPrint with new routers

    I have a OfficeJet Pro 8500 A910 Series printer and was using a linksys WRT160N V2 router (open without a password protection).  I also have an HP Laptop, a MacBook Pro Retina, two IPhones and an IPad.  All devices were able to print wirelessly on the Office Jet.
    I sought to repace the router first with a Linksys AC1200 and then with an Apple Airport Extreme.  With both routers the HP laptop was able to print wirelessly to the printer.  However, the apple products could not.  All equipment is on the same network (password protected).  Sometimes the Apple products can see the printer and I think when first connected they will print.  But within a few minutes will no longer be able to perform an airprint.  If I delete the printer and try to add it - the printer disappears as a nearby printer and sometimes does not show up as a bonjour printer either.
    While I can limp along with the older router, I worry that when it finally dies, I will no longer be able to use this printer wirelessly.  I have both new routers in their boxes ready to be returned - but perhaps there is a solution.
    I have spent hours on the phone with both Apple and witih Linksys to no avail.  I do think this is an HP problem and so do they.
    I have tried limiting the router to a 2.x Ghz - and note that using a 5 Ghs frequency makes the Apple products ever less happy.

    Hi @StarvationPoint,
    Welcome to the HP Support Forums. I gather that since changing your router that you are encountering difficulties in using AirPrint from your Apple mobile devices.
    I have included a post by @Shirlzz1 on the forums titled Help Determine if your router can support AirPrint with the Bonjour Discovery App. It will walk you through downloading an app that checks to see if the routers support Bonjour (I know the Apple AirPort Extreme does).
    I’ve also included the Printing Over a Wireless Network with Apple's AirPrint FAQs document. It has some great trouble shooting steps in the “What if a 'No AirPrint Printers Found' message displays on my Apple device?” section.
    Please let me know the outcome.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Problem with Hp Photosmart D110a for use with iPad 3G

    I have just bought an HP Photosmart D110a for use with iPad 3G but this printer could not be connected to Internet, can anyone tell me what the problem is?

    Hi,
    Do you follow the setup guide ? What is the error ? Looks like your printer is not Airprint ready therfore you need to set it up for ePrint. 
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to setup airprint with my canon printer

    How to setup airprint with my canon printer asnd ipad 3

    Is your printer on the list of Airprint enabled printers?  If it is, you set it up through your home computer and your iPad should recognize it.  If it is not, you can not make a non-Airprint printer Airprint enabled.

  • Why will my epson artisan 810 will not print with ipad?

    Why will my epson artisan 810 not print with iPad?

    Because it is not a Airprint enabled printer.
    http://support.apple.com/kb/ht4356

  • HT4356 Is there an update or patch for Epson workforce 435 to AirPrint with my apple products

    Is there an update or patch for Epson workforce,435 printer to AirPrint with my apple products,I.e. iPhone and iPad?

    Tonye0426-
    You might contact Epson, but I doubt there is a way to upgrade it to AirPrint compatibility.  If you were recently sold the printer for use with an iPad or iPhone, you can take it back and either exchange it or get your money back.
    As Deggie stated, your choices include Apps on the iPad like PrintCentral or the Epson App, or running a program on your computer that shares its printer as AirPrint over WiFi.  Programs that can do that are Printopia and FingerPrint, and are reported to work well.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for both PC and Mac>
    Fred

  • Polarioid pogo printer not working with ipad and iphone

    And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
    Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
    I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
    WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
    Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

    To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
    Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo.  Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind.  This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
    I come from a photograpic background.  I got the Pogo as soon as it came out.  I quite literally was on Polaroid's website every day checking to see when I could order it.  Having "instant" sticker prints is wonderful at family picnics with all the kids.  While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released.  So I took that as the sign that it was probably never going to happen.  (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me.  But, yes, it would be nice.)
    I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints.  Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340.  But it's still Bluetooth only.   So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon.  IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing.  But considering Polaroid's financial issues, I'm not holding my breath

  • TS3308 How can use the printer with iPad

    How can you use the printer ( that is connected wirelessly to the same network ) with iPad

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • What is the best copier, printer scanner to use with ipad?

    the best printer,copier scanner to use with iPad and my iPhone

    As with beauty, best in the eye of the behold or user.
    If you want an AirPrint compatible printer, check the current list and do some research.
    http://support.apple.com/kb/HT4356?viewlocale=en_US&locale=en_US

Maybe you are looking for

  • Seeburger FTP Adapter And SAP PI 7.1

    Hi Everyone, Just a few questions about Seeburger FTP adapter please. Bit of background for clarity, we are doing an implementation using Seeburger FTP and sap PI 7.1 picking up EDIFACT (Orders) and returning (DESADV, ORDERSP, INVOICES). However we a

  • Im having trouble with the installation of the downloaded trial.

    Will download and I downloaded the 7z that is necessary one of the two files. The install won't initiate. Adobe%20Premiere%20Elements%2013-AkamaiDLM.exe PremiereElements_13_LS26_win64.7z We've ordered the Premiere Elements 13 software but wanted to s

  • Will my 2009 macbook pro support a higher operating system than OS 10.5

    Will my 2009 macbook pro support a higher operating system than OS 10.5.8?

  • Can anyone help here 1/2

    Can anyone please help me with getting Logic to control the bank changes on this beast. I have it controlling the patch changes no problem it is just the bank changes I need thanx

  • System copy/system refresh

    Hi Experts, Our dev,qty, prd system donu2019t have exact replica in terms of objects in interfaces. Few changes made at object level in  production system is not done in qty system. To make all the 3 systems containing same objects what need to be do