AirPrint with Laserjet p1102w doesn't work
Ok, just bought the laserjet p1102w and got it to work wirelessly with my MacBook Pro. The printer USB is connected to my AirPort Extreme. I installed the latest driver so that AirPrint would work (based on another previous post), but my iPad 3 and iPhone 4S are unable to find any AirPrint printers!
Not sure what to do now. I thought it would be easier than this. Help!
To work with iOS your printer needs to be on the network and not connected to the base station via USB.
There's more information here: http://support.apple.com/kb/ht4356
Many of the p1102's also need a firmware update.
Similar Messages
-
Hp laserjet P1006 doesn't work properly
my Hp laserjet P1006 doesn't work properly on my windows 7(64-bit) and whenever I try to print a page the orange light just flashes and then the green light flashes and then it doesn't print at all.I've tryed everyway including reinstalling the software or even turning it off and then turning it on.Pleaseeeee.............help!!!!!!!!!!!
Hello
I understand you are no longer able to print with the P1006 on Win8.1.
Did you uninstall the P1006 first?
If not uninstall and reinstall the printer software again.
Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Why tethering with USB cable doesn't work after IOS6.0 update?
why tethering with USB cable doesn't work after IOS 6.0 update?
Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot
-
ITunes 10.4 full screen with Win7-64bit doesn't work correctly.
iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.
Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card -
Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very muchPerhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address. -
In day 4, video # Creating "pages" with Flex states doesn't work
i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem
Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA -
Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?
Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?
More information please.
Version of Reader? OS? Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application. -
Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?
Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
HP laserjet p1102w does not work with Mac computer version 10.8
since i upgraded my Mac to 10.8 operating system, I am not able to use the ePrint function from my HP Laserjet P1102W printer. I was told that the current version of the firmware 20130213 does not support this function. Does anyone know when the new version of the firmware will be available to support this function? thanks much.
This question was solved.
View Solution.Manual, Please let me know the outcome.
-
Hp laserjet p1102w: wireless not working: unable to change to new network
I just moved and established a new wireless network to which I want to connect my printer.
I have followed instructions on HP's websites. All goes well until I attempt to open "html config..." on the printer utility screen. nothing happens after selecting "html config...".
printer works fine if connected via usb; doesnt work wirelessly from laptop, iphone or ipad. I would like to continue to use the laserjet wirelessly.
any suggestions are appreciated!"OK let's try this again. What is the make and model numbers of all you network equipment? How is everything connected? OS of computers? Please explain."
Make & model #:
printer: hp laserjet p1102w
cable modem: arris dg860
I am printing from a macbookpro (OS X 10.6.8), iphone 5c and an ipad.
the wireless printing worked just fine from the laptop, my iphone and ipad while at my previous address where I shared a wifi with roommates. I now have my own wifi via cable (tv) that has a different name than the previous wifi.
this printer currently only prints via USB. the wireless printing doesnt work from any device.
messages:
laptop: printer offline
iphone: no airprint printers found
ipad: no airprint printers found -
Hp Laserjet P1102w Doesn't show up in Print and Fax list OS 10.5.8
Got an HP Laserjet 1102w and tried to install under Mac OS 10.5.8. I downloaded and sucessfully ran the HP drivers but when I go to add the printer under system preferences/printers and fax the list of available printers is blank. I've tried several routines suggested by a web search of the problem to no effect.
Anybody out there solved this?
This question was solved.
View Solution.Thanks for your attention. I figured out the solution. See below.
The printer was connected by USB and I was also trying to get the wireless connection set. I had intermittent progress on both fronts but could not get a successful installation either as a USB connection or wireless connection. The printer would "disappear" off the list of available printers (using the "+" to add printer, OS 10.6.8) or not respond to setup commands. And I could not get the printer's wireless connection to my network to "take".
Printing the configuration page was of no use. If the printer is unable to connect to the wireless network it reports the printer IP address as 0.0.0.0.
TO SOLVE THE PROBLEM
(clicking + under "Print & Fax" the printer does not appear or the printer name disappears)
1) replace the USB cable - the original was susceptible to cutting out;
2) give up on wireless - to - wireless set up methods - no amount of factory resetting would clear the mystery connection block;
3) set up the wireless connection by way of a (good) USB cable;
3) switch the browser used to view the printer's setup page from Firefox (34.0.5 for Mac OS 10.6.8) to Safari
4) use WPA security mode (not WEP as suggested by HP's help files).
The primary troublemaker was the bad USB cable. Going thru a wireless set up presumes that the printer can connect to the network. As already noted, the wireless connection was not working. The blue network light would not come up steady. Some transmission option was blocking sucessfull handshaking between the printer and my wireless router. I tried the recommended factory reset methods without success.
I needed a good USB connection to get to the printer's setup options.
Don't know what was up with Firefox - a bad plugin or something? It just would not connect to the printer via IP addressing. Safari worked fine. (Now the printer is successfully setup Firefox has decided to work too.)
SO THE SOLUTION IS:
1) connect the printer and Mac via a (good) USB cable;
1) use Safari to get in to the printer's setup functions (via system preferences/print & fax/options & supplies/show printer web page);
2) follow the recommended setup options (HP support for Laserjet P1102w, OS 10.6, using a USB cable to set up a wireless connection);
3) select the proper wireless network from the list;
4) reset the security mode to WPA; and
5) give the printer the correct wireless network password.
Thank-you, and the forum, for your help. -
The friend brought to me a gift from the USA, and it doesn't work year. Our operators don't understand it. Help me to unblock iphone4
<Edited by Host>This has nothing to do with iPhones in the Enterprise.
Sounds like your friend is a bit dumb and bought a carrier locked iPhone. The only way to address this is to contact the carrier to whom the device is locked and find out their unlock policy.
Oh, and stop being dumb yourself, posting IMEI, serial numbers, and email addresses on a public forum is just plain stupid. -
forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered. -
Apple Keyboard with number pad doesn't work with Mac Pro?
I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?
It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support -
Change user's OU with punctuation mark doesn't work by Rename User View
Hi,
I have problem with moving user between OU by Rename User View when punctuation mark in name of OU is used.
I have own WF that assign user to specific OU depending on value of Select component. When value of this component is changed (against previous value) I call Rename View, that assign user to new OU. For OU without punctuation mark Rename View works OK.
After finishing WF with punctuation mark in OU this Error appers:
java.lang.RuntimeException: There is no such object on the server.
But creating new AD account (by role assignment) in OU with punctuation work OK. In select component is rule that replace puctional character in correct form.
Select component:
<Field name='slctOrganizationalUnitUzivatele'>
<Display class='Select' action='true'>
<Property name='title' value='Nastavte organizacni jednotku:'/>
<Property name='allowedValues'>
<block>
<dolist name='zmena'>
<invoke name='listResourceObjects' class='com.waveset.ui.FormUtil'>
<invoke class='com.waveset.session.SessionFactory' name='getServerInternalContext' />
<s>OrganizationalUnit</s>
<s>AD</s>
<null/>
<s>false</s>
</invoke>
<rule name="RUL nahrada znaku">
<argument name="inputString">
<ref>zmena</ref>
</argument>
<argument name='hledanyRetezec'>
<s>\,</s>
</argument>
<argument name='nahrazovaciRetezec'>
<s>\, </s>
</argument>
</rule>
</dolist>
</block>
</Property>
<Property name='sorted'>
<Boolean>true</Boolean>
</Property>
</Display>
<Default>
<upcase>
<ref>user.accounts[AD].ad_container</ref>
</upcase>
</Default>
</Field>
WF-Rename User
<Activity id='10' name='renameUzivatele'>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='RenameUser'/>
<Argument name='id' value='$(user.waveset.accountId)'/>
<Argument name='authorized' value='true'/>
<Return from='WF_ACTION_ERROR' to='error'/>
<Return from='view' to='renameView'/>
</Action>
<Action id='1'>
<expression>
<block>
<set name='renameView.accounts[AD].identity'>
<ref>newDNrecord</ref>
</set>
<set name='renameView.resourceAccounts.currentResourceAccounts[AD].identity'>
<ref>newDNrecord</ref>
</set>
<set name='renameView.resourceAccounts.currentResourceAccounts[AD].selected'>
<s>true</s>
</set>
<set name='user.global.OrganizationalUnit'>
<ref>slctOrganizationalUnitUzivatele</ref>
</set>
</block>
</expression>
</Action>
<Action id='2' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(renameView)'/>
<Argument name='authorized' value='true'/>
</Action>
<Transition to='nastaveniPristupu-overeni'/>
<WorkflowEditor x='193' y='343'/>
</Activity>
<set name='newDNrecord'>
<concat>
<s>CN=</s>
<ref>user.global.fullname</ref>
<s>,</s>
<ref>slctOrganizationalUnitUzivatele</ref>
</concat>
</set>Do you have any ideas?
Thanks PetrHi,
I discovered following:
- if name of OU in AD is without space (e.g. test,sample) so DN record is test\,sample and user is moved into this OU.
- if name of OU in AD is with space (e.g. test, sample) so DN record is still test\,sample and user isn't moved.
So problem is with empty space. How can I preserve space in DN name? I found something in documentation but I doesn't work for me.
+Special Characters in FieldValues
If you have a field value with a comma (,) or double quote (") character, or you want to preserve leading or trailing spaces, you must embed your field value within a pair of double quotes ("field_value"). You then need to replace double quotes in the field value with two double quote (") characters. For example, "John ""Johnny"" Smith" results in a field value of John "Johnny" Smith. +
(from IDM Business Administrator's Guide, p.77)
Guided this information I put value of slctOrganizationalUnitUzivatele into "". But this didn't work. Is good idea to have space in DN?
Thanks for help.
Petr
Edited by: petrklinkovsky on Sep 10, 2009 5:06 AM
Maybe you are looking for
-
Can't start up past gray screen on iMac G4 flat panel
My iMac G4 flat panel is messed up right now and I'd appreciate any help I can get here. This morning after I realized my internet wasn't working I tried a restart but the restart stalled around the part where it just shows your desktop picture and w
-
InDesign CS6 crashing when I change document set up from letter to tabloid on all my Indd files
New problem we're experiencing today. Wondering if anyone else is experiencing the same issue?
-
I want to make a photo gallery for my website. I have all the photos uploaded to the site. I have their urls. What I want, is an application that will connect to an xml file on my website and find the urls in it, so that when I want to change photos
-
I am using iAuthor with my imac (Mavericks) and have successfully created a book of 68+pages which I want to export as: an epub for viewing with ibook a pdf file to view on the non mac computer without ibook When I export the book to epub t
-
What happened to my Synching Notes
I can write notes on my iPhone and they used to show on my desktop in the mail program. I've checked to have them synch but on my newly set up iMac 27 inch I don't see the notes and don't know where to find them. Any ideas?