Airprinter not seen on iPad after software up date

I just installed IOS 6.1.3 on my ipad and it no longer sees my air printer an HP photsmart B110, which worked just fine before. Anyone have any suggestions.....I have done all the normal stuff power on/of etc ...on iPad and printer....

The 8110 does not show up on the list of currently supported AirPrint printers.
See: AirPrint basics
So there are probably other utilities you can use to print with, but not AirPrint.

Similar Messages

Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

After an ipad software update, it does not recognize my Ipad in Itunes. Gives error 14. what to do?

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Email address change not showing on ipad after sync

iTunes email address change not showing on ipad after sync

So change it.
Open iTunes, scroll to the bottom of the main page, tap your account name, log out then sign in with the correct name.

Camera roll not seen in album after updating ios8

Camera roll not seen in album after updating ios8

That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album. This Help document explains, where you will see the photos now.
Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
Have you enabled the "Summarise Photos" option? Then disable it.
By default, Photos displays a representative subset of your photos when you view by year or by collection.
To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
And did you migrate your photos from iPhoto? Some photos may still be in the iPhoto Library, that is no longer supported:
See: Migrating from iPhoto for iOS to Photos on iOS 8

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result try to back up and restore via itunes on a computer.
if wont restore try this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

IPad - after software upgrade the APN settings keep resetting by themselves. There are multilple accounts of this happening. Please help.

Hello,
I have a problem with an iPad 2. After the software upgrade to iOS 5 the APN settings keep resetting all by themselves (I set the APN, I get out of the setting by pressing the back arrow on the top left of the screen, I get back in there and the APN setting is gone). Of course, the internet connection si not working. I've seen other people having the same problem on their iPads after the upgrade.
Does anyone have any idea what the problem could be?

I too am experiencing this issue - on an iPad 2 using a UK BT DATA plan SIM. This is not an issue with the SIM, as I have tried it in a different iPad and it works without any problems.
I have also tried all recent iOS updates, hoping it would overcome the issue - but no joy.
Can we have some assistance from the fine people at Apple please???
It is getting rather infuriating

IPhoto Albums not seen in iTunes after iOS 6 update

I upgraded a 3rd gen iPad and an iPhone 4 to iOS 6, then updated my Macbook Pro (2.4 ghz quad core i7, 8GB RAM) to 10.8.2 with the requisite iPhoto update. Now, iTunes will not show my iPad even though wireless sync is enabled, unless the iPad is connected to the laptop via the docking cable. Both iPhone and iPad error out on synch with an error 1140 if synching photos is enabled. Under the photo tab, the button to have "selected albums, events and faces" is grayed out. So I can only select to sync ALL photos or none. I believe the error 1140 is stemming from my library being too large to sync to the i-device. In any case, I can no longer choose certain albums that were enabled under iOS 5. The area below these options in the Photos tab in iTunes also does not show any albums, where it used to do so in a grayed out fashion even if that option was not selected. Major issue here. Have tried all the rebuild and repair of iPhoto library. The kicker is that both the devices I upgraded have the exact same issue, so I'm thinking this is an update/Apple problem, not an issue with my devices or config.

Ok, all. I think I found the problem. In searching for reports of this issue and solutions I found someone that mentioned they had fixed a similar issue with a "free" program called "iPhoto Library Manager." The app apparently lets you split a library into multiple smaller ones or combine multiple libraries. Generally it just "manages" your libraries. I figured I had nothing to lose so I checked it out. Turns out it costs $19.99 but they do have a free demo.
I launched it and it immediately told me that it couldn't display my library and albums due to an issue with the AlbumData.xml file on line 22155. I read in the documentation of the app under it's "Help" menu that likely causes were a keyword with a "null" character at the end, or a file path being referenced inside the library that had an ampersand or backslash in it. The person on the board I'd found had had a keyword issue.
Anyway, I opened the iPhoto library by showing package contents (right click the file to choose this) and loaded up the AlbumData.xml file in TextWrangler, since that displays line numbers. I found that line 22155 indeed referenced an mp3 in my iTunes library that had an ampersand in it. Deleted that line. Then it said line 22156 had an issue so I deleted that, at which point iPhoto Library Manager instantly displayed all my albums. I checked iTunes and it too now showed my albums and the option to sync only selected albums was no longer grayed out!
Per the Library Manager's instructions, I saved the AlbumData.xml file I'd modified. The app said the iPhoto only writes this file out, it doesn't read it. However, other apps read it to get your album info, hence the issue. So I had to go into iPhoto and fix the problem, else the next time I exited the app, it would write the file back out improperly. I noticed in the xml file that where the song was listed it was also referencing one of my albums. So when I launched iPhoto, I went to that album and checked the slide show settings. Sure enough, I had set a custom playlist for that album and listed the song I had seen on line 22155 in the AlbumData.xml file. I removed that song from the settings, and exited iPhoto. No more issues! I appear to be all set!
Now, I'm not clear if I NEEDED to edit the AlbumData.xml file. Just looking at it showed the error and then I had to fix it in iPhoto. So you can probably do that. However, the iPhoto Library Manager software is the only thing I know of that could show WHERE the error was. Since the free demo works for this purpose, I'd suggest giving it a shot. This issue is obviously caused by our individual libraries and is not an Apple issue. Now, the album that had the problem has existed for almost 3 years and I've never had an issue like this arise before so it's anyone's guess as to why it became a problem now. Fortunately, it's all in the past for me now, though!
Hope this helps someone. Good luck!

Device not seen in itunes after data transfer

I bought an original MacBookPro from my daughter & transferred all my data from PB G4 to MBP.
Everything works just fine, except itunes does not see my ipod touch. I cannot figure out how to get it "recognized" as a device?
Any suggestions?

Hello.
Try the following suggestions below
1. Perform all Software Updates - Click on Apple logo in top left corner of the OS and choose Software Updates. It will scan the mac and then populate a list of software that needs updating including iTunes if there is any at all.
2. Connect iPod Touch to another USB Port in the Macbook Pro, If it still does not show up, Disconnect the touch. Reboot the Mac, then reconnect the touch.
*Link below has extensive troubleshooting steps for iPod Touch not seen in iTunes. Follow one step at a time. Post back if you need further assistance from the community.
iPod touch not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS2050

"podcasts" is not visible in iTunes after software update

iTunes no longer shows "podcasts" as a category. I have several active subscriptions--they seem to have disappeared. All of the other usual categories (e.g., music, TV shows) are still there. This occurred immediately after I downloaded today's iTunes upgrade. I have tried downloading more podcasts. That happens fine--but they are not visible from iTunes after the download.

I can re-check the "podcasts" box in the Windows version. It's not grayed out. But there doesn't seem to be any way to save my changes. Didn't the "preferences" dialog box used to have a "save changes" button at the bottom?

Notes deleted from iPad after turning on Notes in Gmail: How to Recover?

I upgraded from iOS 6x to iOS 7.04 and my notes were intact. Then I turned on Gmail to new account and turned on the Notes feature (seemed like a good idea at the time). When I return to Notes on the iPad, there are none. When I check my new Gmail account there are none. When I check my old Gmail account there are no notes. I upgrade to the new Gmail app designed for iOS 7, that didn't help. I do not have a backup in iTunes or iCloud.
Any ideas of how to solve get my notes back? I have a lot and they are important.

Just turn notes syncing back on again.

HT4061 i can not activate my ipad after restored says it needs last owner,not able to locate

cannot activate ipad after restor needs past owners information .unable to locate them

With iOS 7 there’s no workaround.
They should have done this.
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
 Cheers, Tom

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

This is a hint to anyone who cannot find their airprint printer from their ipad: after 10 hours of trying everything imaginable, i can now print directly from my iPad by turning off the bluetooth in settings and waiting for 30 seconds. presto!

after spending a full day and a half trying everything imaginable, i finally found a way to get my ipad to find my new airprint capable printer. I could print from email or the cloud, but not directly from my ipad. After reading a discussion about bluetooth printers, i turned off bluetooth in settings, waited 30 seconds, and voila!! I was able to print directly from my ipad. Try it if you are having troubles

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Unable to Restore my iPad after software update

I just updated all Apple software and went to sync my ipad with itunes...it would not allow me to restore with my back-up information it kept saying there was an error while trying to restore. It gave me 3 options, cancel Restore to factory settings, or Restore with back-up (or something like that.).
The only option I had was to restore to factory settings in order for me to get past it after the 10th time. I powered off (held off switch for 10 seconds) let it stay off for 5 minutes. I also powered down my Windows PC and then reconnected my ipad and tried to restore again. It still gave me the same error. So it looks like I have lost all of my applications and everything I had.
I am now trying to sync again to see what I can do to retrieve all my data but it automatically canceled my sync!!
Help!! All of this because I tried to update to the new software? I LOST everything!!!!!
Please help me get my ipad back the way it was (all of my apps and personal information)!
Thank you to anyone with answers!!
Lil Missy...

Here is the work around:
When and if you get the same error it will prompt you to select one of three choices:
You have to select the LAST choice ---either Cancel (if you do this you will keep going around in circles), Restore to YOUR settings (which is really a trick question), or Restore to Factory (sorry I can't recall exact language)
Then in itunes select your ipad under "Devices" if it doesn't automatically...(YOU CAN SKIP TO #5)
There will be 3 Boxes in the "Summary" screen for you to choose from:
VERSION: DO NOT SELECT RESTORE, BACK.. I selected "Back up to this computer", OPTIONS: click on which ever box you desire (I did #1 & #2). Then I selected "CONFIGURE UNIVERSAL ACCESS" and hit "OK".
In the bottom right hand corner you will see two choices, select "SYNC" and your ipad & computer should start the syncing process which could last a LONG time depending on how much data you have backed up.
Sorry if this doesn't work for you but it's working so far for me! Good luck...and Apple please don't do this again! So very confusing!

Airprinter not seen on iPad after software up date

Similar Messages

Maybe you are looking for