AirSAMStateMachine.c 1583 1223

For the past 2 days, when I've attempted to Sync my email inbox, I have received the following errors in various pairs:
The first error window showed: "There was a problem syncing messages. There was a problem synchronizing with the server. Please select the Sync button to try again." and clicking the details button showed: "AirSAMStateMachine.c 3873 4 Sync Key invalid, cmd: 4, status: 4"
OR
The first error windows showed: "There was a problem syncing messages. The sync could not complete. Possibly out of memory. Please delete some messages and try again." and clicking the details button showed: "AirSAMStateMachine.c 1583 1223 The sync could not complete. Possibly out of memory. Please delete some messages and try again."
I found the cause of the problem to be one message in my Outlook/Exchange inbox. Based on the Outlook message icon and the source of the message, I believe the message was digitally signed. VersaMail/ExchangeActiveSync apparently can't handle this type of message. When I was finally able to isolate the message and move it out of my inbox, I was able to synchronize again just fine.
Post relates to: Treo 680 (Cingular)

You're a genius! Thank you I had been trying everything and no luck. This post really helped. I deleted those emails with digital signatures and bam the sync worked perfectly. This is why the internet post are wonderful things. Again Thanks.

Similar Messages

MS- WIN SERVER 2008-R2 FAILOVER CLUSTER --ERROR 1127 ,1583

DEARS ,
I HAVE BEEN FACING PROBLEM FOR MY WINDOWS FAIL OVER CLUSTER SCENARIO.
THE ERROR CODES ARE 1127 AND 1583 WHICH ARE STATING THAT
All nodes IPv4 networks should be configured properly.
Nodes which are using Automatic Private IP Address (APIPA) for adapter Cluster.will not be added to the Windows Failover Cluster. If the adapter is to be used by Windows Failover Cluster, the IPv4 properties of the adapter should be changed to allow assignment
of a valid IP address that is not in the APIPA range.
However , I have checked that all of my NIC adapters have valid Static IP addresses. Also , when one of the nodes is down ,it cannot look for another node.
Please advise for the solution.

Hi,
Could you clarify your described “Nodes which are using Automatic Private IP Address (APIPA) for adapter Cluster.will not be added to the Windows Failover Cluster.” Did you
found one of your cluster node “automatically” have the APIPA address? If so, it seems is the IP conflict issue.
If it is not the IP address conflict issue, please try to disable your all the nodes firewall
or AV soft have the event 1583 typically cause by this function incorrect configured.
More information:
Event ID 1127 — Cluster Network Connectivity
http://technet.microsoft.com/en-us/library/dd353958(v=ws.10).aspx
Event ID 1583 — Network Connectivity and Configuration
http://technet.microsoft.com/en-us/library/ee830320(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Areca ARC-1223-8I Worth it?

Hi Everyone,
First time posting but sure enjoy reading.
Is this Areca Raid card a waste of money for my editing rig that i just built.
Areca ARC-1223-8I-MS PCI-Express 2.0 x8 Low Profile SATA / SAS RAID Controller Card
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816151130
Or should I bite the bullet and get something like this with more cache.
Areca ARC-1231ML-2G PCI Express SATA II (3.0Gb/s) Controller Card
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816151033
The Rig
2X Samsung 840 SSD
8X Western digital Black
Intel I7 3930K
64Gb Corsair Vengence Ram
Asus GTX 680
Asus Rampage IV Extreme
1050 Corsair Power Supply
Corsair H110 Water Cooler.

Thank you Harm and Jim,
For saving me some money but at the same time costing me more.
One more question can I or should I install the Areca ARC-1882ix-12 on a fresh Windows 7 pro install or can I install the card after Windows is installed?
Here are some pics of the rig that I have decided to call Little HARM, because without a doubt it was inspired by Mr. Harm Millard and his vast knowledge of NLE systems.
Thanks again!

Rep - 1223 (Invalid Page Size)/Urgent

Hi,
I has developed a report in character mode.Then i save the report.In order to have a precise alignment i then changed the design in character units property to Yes.After some time,while running the report it gave an error Rep - 1223 (Invalid Page Size).
On seeing the property inspector for Paper layout for the Main Section,i saw that the width and height property increased to some very high level.On trying to reducing the width and height size ,it gave a message that unable to reduce it since the layout is not large enough to accomodate layout items.
Even when i do not save the report the next time,the error somehow persists.
This kind of error comes very occasionally when try to design character mode reports using design in character units property set to Yes.
Kindly help me out.
Regards
Deepak

Hi Deepak
I suggest you apply the latest patch set and check if issue still exist. There are no known issues like this currently.
Thanks
Rohit

Install log shows error 1223 1056 for Auto Updater

I have my Flash Player set to update fully automatically, but this seems pretty haphazard at the moment. I checked the install log, and this is a section from it.
2012-5-11+9-0-31.513 [error] 1226 1062
=O====== M/11.2.202.235 2012-05-11+09-00-24.659 ========
0000 [I] 00000010 "C:\Users\Nige\AppData\Local\Temp\{98D35243-42EB-4FD2-80EE-7BCE8E2481E4}\InstallFlashPlay er.exe" -iv 4
0001 [I] 00000020 C:\windows\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Mozilla\MaintenanceService\extensions/Plugins 2
0004 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0005 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0006 [W] 00001036 Software\Opera Software/Last CommandLine 2
0007 [W] 00001036 Software\Opera Software/Last CommandLine 2
0008 [W] 00001036 Software\Opera Software/Plugin Path 2
0009 [W] 00001036 Software\Opera Software/Plugin Path 2
0010 [W] 00001015 C:\windows\system32\Macromed\Flash\FlashUtil32_11_2_202_235_Plugin.exe 5
0011 [I] 00000014 C:\windows\system32\Macromed\Flash\NPSWF32_11_2_202_235.dll
0012 [I] 00000015 C:\windows\system32\Macromed\Flash\FlashUtil32_11_2_202_235_Plugin.exe
0013 [E] 00001025 C:\windows\system32\Macromed\Flash\FlashUtil32_11_2_202_235_Plugin.exe:32
0014 [I] 00000017 C:\windows\system32\Macromed\Flash
0015 [I] 00000019 C:\windows\system32\FlashPlayerCPLApp.cpl
0016 [W] 00001024 C:\windows\system32\FlashPlayerCPLApp.cpl 183
0017 [W] 00001024 C:\windows\system32\FlashPlayerApp.exe 183
0018 [I] 00000021 C:\windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe
0019 [W] 00001106
0020 [W] 00001106
0021 [W] 00001024 C:\windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe 183
0022 [I] 00000012
=X====== M/11.2.202.235 2012-05-11+09-00-46.845 ========
2012-5-20+18-37-0.256 [error] 1223 1056
2012-5-25+23-37-0.257 [error] 1223 1056
2012-6-3+7-37-0.258 [error] 1223 1056
2012-6-4+8-37-0.255 [error] 1223 1056
2012-6-7+11-37-0.257 [error] 1223 1056
Can someone advise what these error codes mean and how I can rectify them ? I appears that the update has worked in the past for both the my Firefox plugin and the ActiveX component, but it would be good to get confirmation on that, too.
Thanks.

the same here
2012-6-1+17-7-33.985 [error] 1226 1062
=O====== M/11.2.202.235 2012-06-01+17-07-32.534 ========
0000 [I] 00000010 "C:\Windows\TEMP\{FE5CA04F-F3F5-4AF4-9F09-A90568B13457}\InstallFlashPlayer.exe" -install -skipARPEntry -iv 9 -au 4294967295
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0004 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0006 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0007 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0008 [W] 00001036 Software\Opera Software/Last CommandLine 2
0009 [W] 00001036 Software\Opera Software/Last CommandLine 2
0010 [W] 00001036 Software\Opera Software/Plugin Path 2
0011 [W] 00001036 Software\Opera Software/Plugin Path 2
0012 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_11_2_202_235.dll
0013 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_2_202_235_Plugin.exe
0014 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0015 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0016 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 183
0017 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerApp.exe 183
0018 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
0019 [W] 00001106
0020 [W] 00001106
0021 [W] 00001024 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe 183
0022 [I] 00000012
=X====== M/11.2.202.235 2012-06-01+17-07-36.481 ========
2012-6-14+11-7-0.219 [error] 1223 1056

Error:- Rep-1223 Invalid page size

while am trying to run the reports which is having 67 columns , throwing error in Oracle reports 10g i.e Rep-1223 Invalid page size...plz help
As am having 67 columns in a reports like below,
----(1)--,(47),---(2)-----,-----(3)---------,-(4)--,--(5)--,---(6)-------,---(7)------
,--(8)------,--(9)-----,------(10)---------,-(11)-,--(12)---,-(13)-,----(14)------,
----(15)---,---(16)--------,----(17)---------------,-------(18)--------,
--------(18)---------,------(19)------,---(10)-----,-----(21)--------,---(22)------,
----(22)-----,----(23)--------,-(24)-,--(25)----------,----(26)--------,
-------(27)--------,
--(28)--,-----(29)--,-(30)-,--(31)-,
--(32)--,---(33)----,-(34)-,--(35)--,
--(36)--,---(37)----,-(38)-,--(39)--,
--(40)--,---(41)----,-(42)-,--(43)--,
--(44)--,---(45)----,-(46)-,--(47)--,
-------(48)---------,--(49)-,-(50)-,----(51)------,----(52)-----,-----(53)------,
-(54)-,--(55)---,--(56)-,----(57)-----,-(58)-,-(59)-,---(60)----,-----(61)------,
-----(62)--------,---(63)----,-----(64)----,---(65)----,--(66)--,-----(67)----,
thanks,
prasadreddy.

Hi,
Did you set the Layout Model, header/Main/Trailer --> Width/Height and need to check format type, some case run in Character mode or Bitmap Mode.
Regards,

MY Compaq Presario CQ50 Notebook SHOWS: !! 0XC0190002 !! 1223/49793 (nshhttp.dll). pls solution

MY Compaq Presario CQ50-105EE Notebook SHOWS: !! 0XC0190002 !! 1223/49793 (nshhttp.dll) AFTER UPDATING FOR PACK 2 AND STOP DURING THE INSTALATION. I AM USING VISTA WINDOW. THIS WAS THE LAST RESULT BEFORE I RE-START TO RECOVERY

I would use the HP recovery discs to re-install Vista.
DO you have any data you need to back up first?

Reports error rep-1223

I am using Developer suite 9i reports. In the running of one report, i am getting the message rep-1223 "Invalid page size". I do not know, how to see help on the error message. Even i have the old Reports developer 2.5, but in that also, i forgot how to see the error message. Could i get help on how to see the menu sequence help to see the error message.
I hope, my quetion is clear. Please help in solving the doubt.
Rgds.

Hi,
Did you set the Layout Model, header/Main/Trailer --> Width/Height and need to check format type, some case run in Character mode or Bitmap Mode.
Regards,

Sync problem-message AirSAMStateMachine.c 2214

When I attempt to sync my phone with Microsoft Outlook 2003 sp2, Windows XP, Exchange Server 2003, version 6.5, it connects and the word "Receiving" appears for two seconds. The following message appears "There was a problem with syncing. There was a problem syncing messages."
Then I select the Detail button and the following message appears "AirSAMStateMachine.c2214 6 Http/1.1 500 Internal Server Error Date: Thu, 05 Mar 2009 22:50:26 GMT Server: Microsoft-IIS/6.0X-Powered"
Any thoughts? Help please?
Post relates to: Treo 755p (Sprint)

Since the error includes the following: Internal Server Error - then I would contact the IT administrator. Mostly if you were able to sync before and this just randomly appears then I would give it some time. I would suggest contacting your IT admin anyways to check if anything needs to be done on the treo.
Post relates to: Centro (Sprint)

AirSAMStateMachine.c 3722 1509

I am getting the following synch error on my 755P: AirSAMStateMachine.c 3722 1509
It is referring to the error when it tries to synch my contacts.
Can anyone help me solve this problem?
Post relates to: Treo 755p (Sprint)

Palm has a support article on this one. Looks a little arduous, but see what you think:
Palm Support : AirSAMStateMachine.c message containing Error Code 1509
http://kb.palm.com/wps/portal/kb/common/article/41976_en.html

700p + Activesync + AirSAMStateMachine.c 1913 3

Been trying for weeks. No luck. Have a 700p (Sprint), trying to sync wirelessly over the air with Microsoft Exchange Activesync Server 2003. Has never worked. Sprint and Palm advanced technical support unable to help ... Using Versamail and EAS update download ... My IT folks say my settings on the phone are correct -- and the server indeed works (all the 700w phones on our network are able to sync flawlessly, but the 700p has never worked).
After every attempt I get following error message on the phone:
AirSAMStateMachine.c 1913 3
Any clues, tips, suggestions, hints, truly appreciated.
Post relates to: Treo 700p (Sprint)

jjgarcia74 wrote:
I'm getting the same error and need help. Things use to work perfectly where it would sync automatically and would sync on demand. For the past two weeks, I couldn't sync on demand and would get the AirSAMStateMachine.c 1913 3 error. I then updated with the EAS update and now it will not sync automatically and on demand. Help!
I reset my treo to factory defaults and first setup my email and it gave the same error. Except the error code was different. It's AirSAMStateMachine.c 530 3
Any suggestions?

Treo 700p: AirSAMStateMachine.c 2438 4 Sync key invalid, cmd: 4, status: 4

I have a user getting the error "AirSAMStateMachine.c 2438 4 Sync key invalid, cmd: 4, status:4" when he tries to sync contacts on his 700p. His messages and calendar sync fine, but syncing his contacts does not.
Post relates to: Centro (Sprint)

Hello!
Which software version does the phone have. Go here to check that out:
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=1301,E=0000000000320371400,K=179,Sxi=4,case=obj(931...
Make sure it is at least 1.10. If not, please run the updater found there.
Post relates to: Treo 650 (Unlocked GSM)
Post relates to: Treo 650 (Unlocked GSM)

Hp 300-1223 window 7 want shut down with power also the screen black

all in one 300-1223 that want shut down with the power button every still run's and the scrren stay black when power up .Using window's7. Help please

It could be the power supply, shorted device of any kind attached (bad printer, flash drive, keyboard, mouse, network connection), memory problem, video card fan not spinning and the video card could have overheated, bad capacitors (rounded or leaking a brown or dark substance). The first think you should do is make sure it is not under warrantee. If it is, contact HP. If it isn't, remove the cover and inspect the board for bad capacitors, fans not turning, disconnect all non essential items like the hard drive, DVD, floppy if you have one, all external devices (yes the monitor) and turn on the computer. Does it appear to stay on? If yes, shut it down by holding in the power button for 5 or more seconds or flipping the power switch on the power supply or pulling the plug. Connect the monitor and then one item at a time leaving the hard drive with your important data as the last item. If it didn't stay on. Try to use only one piece of memory and try each memory slot, try the next piece etc. If that doesn't work, the best guess is the power supply (if you have an ohm meter - test the power supply first). You can run a anti-virus/adware/spyware check by removing the drive and attaching it as a 2nd drive on another machine. You could also run a check disk while it is there. I like to download the hard drive manufacturer's disk certification test iso image and make a bootable cd. Boot off the cd and test your drive. It can fix bad sectors and some minor drive problems.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

AirSAMStateMachine.c 1913 103

Hi,
I'm using Treo 680 in China, and try to Activesync with my company's email in Sweden, which is using outlook 2007 email server.
but I keep getting the same error message: AirSAMStateMachine.c 1913 103
There was a problem with syncing. Can't connect to server. Please check your network or server settings and try again.
I even try to use some of the changes from this forum like put the email as:
Domain name\Username
However it still doesn't work.
Our server need to use proxy server, so the set up is much more complicate.
Have anyone encountered the same problem before?
Post relates to: Treo 680 (Unlocked GSM)

The answer to this in not pretty but, in a nutshell, your Exchange administrator is going to have to update the certificates on the mail server.
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=65,E=0000000000854089060,K=8474,Sxi=11,Case=16733
Message Edited by Tribbles on 02-08-2008 11:30 AM

AirSAMStateMachine.c 3259 1510 error

I have an airSAM-error that I have not yet seen posted.
airSAMStateMachine.c 3259 1510
My Treo 700P no longer syncs unassisted. I'd greatly appreciate help/advice.
Thanks
Post relates to: Treo 700p (Sprint)

This error message nearly always happens with a corrupt offline calendar event. The fix for this is:
In Outlook, click on Calendar to view the calendar.
Open the File menu.
From File, select Folder, then Properties for "Calendar".
Under the General tab, click the button for Clear Offline Folders.
Your Calendar items may disappear. If this happens, you can restore them from the Exchange server later. For now, don't restore it.
Perform a HotSync operation.
Open the HotSync log and look for the OLERR message. If it's not there, you have resolved the issue.
Whether or not OLERR returns, you can now restore your Calendar data from the Exchange server:
In Outlook, open the Tools menu.
From the Tools menu, select Send/Receive, then Send/Receive All.
Your Outlook client will contact the Exchange server and display your Calendar information from the server.

AirSAMStateMachine.c 1583 1223

Similar Messages

Maybe you are looking for