AirSAMstatemachine.C 530 4657

Can't find this exact error message. Anyone know what it is for? Can't connect to exchange at all.
It is a Verizon 700P.
thanks
Post relates to: Centro (Sprint)
This question was solved.
View Solution.

how many palm phones or devices are using this server? if the details said that it's something with the server settings, i can't think of any other setting that may have cause this error. by the way, does the details shows status with a number? if it does, what number was it? the range is from 1-11.
by the way, you can also check the OMA (Outlook Mobile Access) if your user account has data service, certificate and login credentials. if you can log in to OMA on the device's web browser using your username and password which is the same as the one being inputted in the versamail. then that's should work. also check the port numbers and if server is using authentication to login.

Similar Messages

700p + Activesync + AirSAMStateMachine.c 1913 3

Been trying for weeks. No luck. Have a 700p (Sprint), trying to sync wirelessly over the air with Microsoft Exchange Activesync Server 2003. Has never worked. Sprint and Palm advanced technical support unable to help ... Using Versamail and EAS update download ... My IT folks say my settings on the phone are correct -- and the server indeed works (all the 700w phones on our network are able to sync flawlessly, but the 700p has never worked).
After every attempt I get following error message on the phone:
AirSAMStateMachine.c 1913 3
Any clues, tips, suggestions, hints, truly appreciated.
Post relates to: Treo 700p (Sprint)

jjgarcia74 wrote:
I'm getting the same error and need help. Things use to work perfectly where it would sync automatically and would sync on demand. For the past two weeks, I couldn't sync on demand and would get the AirSAMStateMachine.c 1913 3 error. I then updated with the EAS update and now it will not sync automatically and on demand. Help!
I reset my treo to factory defaults and first setup my email and it gave the same error. Except the error code was different. It's AirSAMStateMachine.c 530 3
Any suggestions?

Unable to use Intel 530 SSD with M5400

Hello!
I finally decided to write over here, after reading and viewing a lot of forums lately on this subject.
Context:
I have an Lenovo M5400 (but don't think this is definitory to the problem, as I've seen that the same simptoms seem to exist to other lenovo models as well) with the SSHD drive. I bought an Intel 530 SSD (don't think the brand mathers either) and wanted to replace the SSHD with it.
Upon replacing the original drive with the SSD, in order to make a clean windows install, the Windows 8 installer is unable to correctly detect my drive.
The drive is visible in the BIOS (at times?!) and seems to interfere somehow with the booting process, as sometimes, the boot stucks with a blank screen and the green light of the drive is on permanently. (this doesn't happen all the time).
What I tried:
1) At first, I had the drive unitialized: no GPT or MBR, no partitions on it. I tried to install it as such, but failed. It was not visible to the Windows installer, only in BIOS, in the boot order, I could see it. This was done in BIOS legacy mode.
2) I tried loading drivers in the Windows installer, via the "Load driver" option, when you get the message "W couldn't find any drives" or something like that. That was unsuccessful with the following: a) lenovo ahci drivers, from the online driver store, b) my previous windows drivers, which I took on a USB stick, c) some drivers from intel site.
3) At this point, the Intel firmware update bootable tool was not seeing my drive either.
4) I then initialized my drive by connecting it via a SATA-to-USB cable to my computer and repeated step 2), with no success still. I initialized it as MBR but I doubt that initializing it as GPT would have made a diffrence. I tried both with creating a primary and active partition and with leaving the drive initialized with all the space unallocated. No success.
5) I tried to update lenovo BIOS, because I suspect it's the cause of the problem, but was unable to do so. Downloaded the bios utility but it gives me an error "Bios folder ... ". With the bootable bios cd, it doesn't work: it doesn't boot. Has anyone managed to flash a newer bios? There is one posted on 09/30/2013 on the site, and my current one is 09/26/2013, as shown in BIOS.
6) I then fiddled with various BIOS modes: uefi, legacy, both with priority, but with no success.
At one point, I managed to see the drive in the windows installer, it was in UEFI mode only, with WIn 8 Optimized defaults ( I think) but I feared that it was just a single happening and didn't do anything, instead tried to see which settings worked in order to be able to reproduce this. I completly lost my chance, as after that, I didn't see the drive again in the windows installer. When it worked, I didn't have to load any driver. It saw it as MBR and prompted to format is as GPT, in order to use with UEFI booting.
The things I noticed:
On some occasions, in the bios boot order menu, the drive is identified as an Intel ssd, and on others just as an generic ATA HDD. I think there is a bad link between those two. When I reboot, restart, on some occasions I see it as the Intel drive and on others as the generic one. I think that in the case of generic drive, the windows installer has no chance on recognizing it.
When it is seen in the bios though, I get all sort of problems when trying to boot a CD or USB, as it seems to ignore them and get stuck in the boot process. I think that in this situations it correctly detects the SSD, if I were to look in the BIOS. But when I try to boot the CD or the USB in these situations, it just stucks with the green drive light permanently on, and with the CPU working on something ( I hear the fans starting) and the boot stops here indefinetly. I have to restart, and then, depending on the case, I get the same results, or I can boot the CD but don't find the drive.
I don't know by what chance I managed to "capture" it once in the windows installer but think this should be the common case.
After all these, what I suspect is that the Lenovo BIOS is broken somehow. It messes up with the boot order, because although I have priority for the DVD, the boot gets stuck on trying to do something with the SSD, as described above.
I am in the situation of returning the SSD back to the shop, as it is unusable with the current Lenovo m5400 motherboard/bios or whatever other hardware interferes with making it properly work ( ahci controller?).
I am very upset by this, and have seen that on these very boards, there are other posts as well, not on this model, but on other lenovo models, with the same scenarios and simptopms as mine, which didn't get any solution.
So, is there an answer to my problem? To update the BIOS? How to make the BIOS to not mess up with the boot order and get stuck? I tried all the possible combinations with no success and it's really frustrating.
Another update:
A lot of people seem to be having problem with the particular Intel 530 SSD. So this issue may not be related only to the motherboard/bios. I will post links to the corresponding threads from the intel boards:
https://communities.intel.com/thread/49389?start=15&tstart=0
https://communities.intel.com/thread/52959
https://communities.intel.com/thread/51111
Does anyone have any idea or hint if using other software for initializing the SSD than Computer Management/diskpart is of any help? Like EASUS partition manager or Gparted? Maybe the disk isn't partitioned correctly.
The disk isn't detected as an Intel SSD with the SATA-to-USB cable, instead being masked by it. Maybe this is another problem?

Hello! I have the same problem as you.
I tried to connect OCZ Vertex 2 60GBSSD but I failed. It has the same conntroller SandForce but the older generation.
Maybe that's the problem?
I was unable to install it on Windows 8.1, when I switched to the BIOS to ACHI mode Capability mode. But later he again loaded with it, then the BIOS will not see it to be.
I think the problem in the BIOS! I have 2.03 the latest.

Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct

I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
-Jay-
Post relates to: Treo Pro T850 (Sprint)
This question was solved.
View Solution.

audiojay11 wrote:
P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
Try adding it to the server name, e.g.: smtp.provider.com:587

Mid-2010 MacBook Pro and Intel 530 SSD

Hey everyone,
Does anyone have any information regarding upgrading my mid-2010 MacBook Pro i5 running Mavericks with an Intel 530 250GB SSD? I have read some stories of people not being able to boot etc when running Lion with the 510/520 series. If it is not compatible, any suggestions of a similar SSD from another manufacturer?
Thank you all in advance and Happy Thanksgiving!

@Clinton, thanks, I like this machine as well.
FWIW, I got the SSD with the "Data Doubler" from Macsales. For those who do not know this is a metal frame that allows a standard size 2.5" disk or SSD to be used in place of the optical drive, which in my case no longer was able to read many media disks anyway.
I setup the SSD in the old optical bay and left my 1TB Toshiba hard drive in the hard drive bay. I did this because I have some long ago memory of reading somewhere, perhaps in error, that the sudden motion sensor won't signal a hard drive in the optical bay in the case of an event.
The SSD is my boot device and main device while the hard drive is my media drive, movies, music, as well as the virtual Windows drive using Parallels. As a development machine this SSD has put new life into the old girl and saved me quite a nice chunck of change over getting a new machine.
One note; for my machine OWC recommends getting the 3G (SATA II) drive rather than a 6G (SATA III) as due to some quirk an OWC 6G drive will fall back to 1.5G speeds rather than 3G. Here is their list of machines:
MacBookPro5,1
MacBookPro5,2
MacBookPro5,3
MacBookPro5,4
MacBookPro5,5
and here is the link, for those interested: http://eshop.macsales.com/item/OWC/SSDEX6G240/

I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status:          Resolving address of amyhoney.com
Status:          Connecting to 184.168.54.1:21...
Status:          Connection established, waiting for welcome message...
Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:          220-You are user number 12 of 500 allowed.
Response:          220-Local time is now 04:05. Server port: 21.
Response:          220-This is a private system - No anonymous login
Response:          220 You will be disconnected after 3 minutes of inactivity.
Command:          USER 5475****
Response:          331 User 5475**** OK. Password required
Command:          PASS ********************
Response:          530 Login authentication failed
Error:          Critical error
Error:          Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Hp 530 won't start up or even show on screen or alternate vga

Hi I own a HP 530
s/n: CND8240GR3
P/N: FH554AT#ABA
It was working well for at least 4 months of use, then one morning, plugged in or not, it would not boot up. I'm not talking about problems with windows (I was running windows 7 beta) starting or not, I am talking about the bios not loading at all!
All that happens is when I press the power button, it's led goes green, the wifi radio button and the caps lock led light up together for about a second then turn off. Sometimes I can hear the fan, other times, it's running quietly, not showing anything at all on the screen or on a connected monitor. It will stay like this despite having changed around the memory sticks. Curious thing is that when I try with no ram installed, it does the same thing, leading me to wonder if the processor or motherboard is the problem..
In fact the behavior of the laptop doesn't change no matter if I run it without any memory, hard drive or dvd drive inserted.
Help!

Hi MeikoC,
You will have to do a system restore. You can restore it using a system disk or F11 on boot. Here is a document on this.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5218386&tmp...
Hope this helps if not you will have to contact the seller.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Data acquisition from SR 530 lockin

Hello,
I need to read the output of the sr530 vector lockin and store them in a file.
I was wondering if there is any driver which will let me read frequency, output amplitudes & relative phase between the input & output signal!
Any help will be much appreciated!
Thanks a lot,
Ashutosh.

Thanks a lot for the help Matt.
I can connect the device via GPIB. Let me tell you a bit more about the problem. As of now I was using a single channel lockin, EG & G 5209, to read the data(so I am kindda familiar wtih data acquisition... not much though). And the only thing I was reading was the output amplitude of the lockin.
Now I have to use the vector lockin, SR 530, and I will need to read both the output amplitudes, the phase & the frequency (all four of them)at the same time. And I am looking for a driver which can do this, i.e. which can read all four data simultaneously & store the result in a *.txt or *.dat file.
Do we have something like that?
Thanks,
Ashutosh.

I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!

Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek

Windows phone Nokia lumia 530 can't download any apps error code 80070490

I have a new windows phone Nokia lumia 530. In trying to set it up I accidentally put a typo in my email address.I have done a use a different address as your primary alias, yesterday by making a new outlook account. However, I can't get the security code.
Every time I try to download anything, including Cortata it tries to send it to the email address that doesn't exist.
HELP!
Laurie 9323

Hi,
This is the incorrect forum however I have had this issue myself
The issue is based on the Microsoft live account verification, if you created a new Microsoft Live account while registering the phone or registering for a new store account you will need to log into the windows live website with the same credentials and
verify/validate the account.
Once done, power off the device completely, then power it back on and you should be good to go :)
Regards,
M
If you find my information useful, please rate it. :-)

I have tried to log in on a web site and this is what I'm gettig: Alert 530 Autentication failed. I have used the correct password and user's name.

ftp.oxbow.fr This is the file I have log on and I have used the correct password and user's name and this is what comes up:
Alert 530 Authentication Failed!

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

HP 530 notebook PC - hard drive and RAM upgrade

Hello, I'm using HP 530 and I want to upgrade it's hard drive.
In documentation specified that my notebook supports only 80/120Gb hard drives and up to 2Gb RAM.
Is it true? Can't i use more capacious HDD or RAM.
And what type of HDD i should by? Is it compatible with SATA2 2,5" drives?
I have model with Intel 945GME chipset (p/n ke666aa#acb)
PS: sorry for bad english
UPD:
Thank you very much for answers!
Yesterday I plugged 2Gb RAM module and with existing 1Gb module I get 3Gb RAM and it works fine.
Also I replaced my hard drive with SATA2 500Gb 7200rpm drive and it wotks fine too!
This question was solved.
View Solution.

>> Is there any real limitations of HDD size for my HP 530?
No, you can bet bigger HDD for (it uses SATA HDD)
BH
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Recommendations for a second hard disc for my Inspiron 530 please

Hi,
I have a standard Inspiron 530.
My primary 320GB HDD drive is getting close to full and I want to add a second internal HDD.
My intention was to use the new drive as a secondary drive just to store and edit photos.
Can anyone recommend a compatible hard drive around 500GB in size that I can use.
Can you tell me if it a SATA drive that I need , recommended speed (RPM), and will I need to get any connectors etc.
Thanks in advance for your help and advice
David

providan
Assuming that you have the Inspiron 530 Mini Tower and not the 530s Slimline version.
You can install any SATA 3.5", 7200rpm internal hard drive up to 2tb without issue.
Check out the Seagate and Western Digital brands, also check the lenght of the manufacturer's warranty, unfortunately hard drives prices are extremely high, due to the Thailand flooding, drives I purchased last September for $40 with a promo, now cost $108.
Instructions for physically installing a second hard drive in a 530 are here.
You will need a SATA data cable there should be a spare SATA power connector inside the case.
After installing the drive enter the system setup and check that the hard drive is 'enabled' [on] and recognized. System Setup.
For windows to recognize the second hard drive, it must be partitioned and formatted. Go to Control Panel, Administrative Tools, Computer Management, Storage, Disk Management, right click new drive, select format, then you can assign a drive letter.
Bev.

Sender File Adapter - FTP Connection Error 530

Need help!!!
I am getting the following error in XI when I try to connect to an ftp server.
"An error occured while connecting to server xxx.xx.x.xx:xx. The FTP server returned the following error message:'com.sap.aii.adapter.file.FTPEx: 530 Can't open passive connection---(4013)'. For details, contact FTP server vendor"
When I try the FTP connection on the OS level I am able to log in, but through XI I am unable to.
Has anyone seen this error before?

I have seen Error Code 530 earlier, it is typically related to login related issues.
Check if the user mentioned in the Comm Channel has the correct password and read as well as write rights on the Server.
The most likely problem is with the User Credentials or Authorizations

Remote Server returned '530 5.7.1 Client was not authenticated'

Hello,
I migrating from Exchange 2007 to Exchange 2013.
The Exchange 2007 infrastructure look like:
-2 CAS ( Hub1 and Hub2)
-2 MBX ( mbx1 and mbx2)
We add Exchange 2013 in the mix
2 CAS ( CAS-2K13-1 and CAS-2K13-2)
2 MBX ( MBX-2K13-1 and MBX-2K13-2)
All mailbox are curently on Exchange 2007. All inbound email pass by a SMTP Relay who forward the email to a NLB of Exchange 2013.
The send connector (internet) forward email to the SMTP relay, and the source server are only 2K7 server.
My problems is : if I replace the two 2K7 server from the source server for the 2K13 MBX, I receive this message:
The following organization refuse your message: MBX-2K13-1.contoso.com
Generation server : MBX-2K13-2.contoso.com
[email protected]
MBX-2K13-1.contoso.com
Remote Server returned '530 5.7.1 Client was not authenticated'
idea?

Do you smarthost from the send connector to another SMTP gateway?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

AirSAMstatemachine.C 530 4657

Similar Messages

Maybe you are looking for