Airtunes/Airport Express stopped suddently..

Hi!
Bought Airport Express a month ago, works great in the beginning. But since last tuesday it doesn´t work anymore. The system finds the Airportexpress station but I get no sound out of it. Any ideas what to do?

Hello HappyViking,
There could be 99 problems, I take that back there could be 100. Are you streaming music from itunes? Is the vol turned up? is the device connected the base station on and set to the correct input?
Try this plug a set of headphones into the airport ( say the ones that came with your iPod) and test. No sound?
Let's change the status light to reflect activity rather than status. You can do this by using the airport admin utility and configuring the base station. To change the light status click on base station options.
Stream music to the base station, Does it flash? Yes but no music bad audio jack. No then you are not streaming. Try to connect the airport via ethernet( and enable airtunes over ethernet) ,able to stream? Yes then it is not software related. Can you surf the net wirelessly? Yes then the base station is bad, if not then inspect your networking setting and possibly your airport card.
Good Luck,
Cowsweat

Similar Messages

Airport Express stopped showing up on the wireless network

Airport Express stopped showing up on the wireless network, and now I can't stream music from my iMac or iPhone through the AE as I used to. I now have a new adsl modem, but it doesn't help. The AE has a wireless connection to the modem. I've used Airport Utility to setup the AE again, no help. I also updated to Maverick but it didn't help. Any ideas?

By "I can't reset it" do you mean you tried both the "hard" and "factory default" resets on your AirPort Express Base Station (AX) and still were not able to see it from iTunes? ...and if so, were you able to connect to it directly, using an Ethernet cable, to configure it using the AirPort Admin Utility?

Airport Express stopped working...

My airport express stopped working some time ago so I bought a new one so I could play my music remotely again. My ld one just "disappeared" , it no longer showed on iTunes. I am having problems setting the new one up. I am using airport utilities and going through all the prompts. It is making me join my existing wireless network. At the end when it goes to restart, I get an error message "Airport utility was unable to find your Apple wireless device after restarting".
I am stuck, any suggestions?

Quick check list
Is your AE firmware updated to 7.3.2?
Is your OS 10.5.4?
Is your Airport Utility software 5.3.2?
What are you using for a wireless base station? is it a combo modem / router, or are you using an Apple Extreme Base Station in bridge mode with a third party router?
All of the above are possible issues.
Provide some more detail in your post and the group will be more likely to be able to help
Cheers

Airport Express Stops Working

Dear All, My Airport Express just stopped working. I tried to reset it (while plugged in, use a pin to punch the reset hole) but the amber light keeps blinking. Is this normal? Or have I done anything wrong? I truly appreciate your input.
Jimmy Chiu

A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
o The base station has not yet been configured because it is new, or the reset switch has been set.
o You have selected a security configuration that is not recommended.
o One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
(ref: http://docs.info.apple.com/article.html?artnum=305101)
If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.

TV and Airport EXPRESS stop streaming after update

I have read all of the posts regarding the Airport Extreme update being the culprit of the slow streaming with the Apple TV, but I have an Airport Express (2 actually) that suddenly stopped streaming after the last batch of updates (iTunes 8 etc.).
Everything has been working flawlessly - I have all my movies and TV shows on an old Mac that streams to my Apple TV via 2 Airport Express base stations. I have one AE station "hosting" my internet connection, and then the other acting as a WDS remote. Suddenly after the last updates I have no streaming. I have re-set everything, and re-connected my media server to my Apple TV and no luck. My AE's are at the latest firmware 6.3, and Apple TV, iTunes and even OS is all up to date.
If anyone has any ideas how to fix this I would really appreciate it - it's driving me crazy.
Thanks in advance.

Am in the same boat as it where, so will be happy to hear a solution!

Airtunes + airport express

My airport express was not working as a print server so I downloaded Bonjour which immediately fixed the problem. Now my itunes does not recognize my airport express and I cannot play music through my stereo. Any suggestions on how to re-connect my airtunes?

Has anyone heard of a workaround?

Airtunes/airport express not connecting

I'm having trouble with my new airport express. I can't seem to get it set up.
Currently, I have the old, flying saucer shaped airport extreme. I bought the airport express because i want to use airtunes. I used the set up assistant to set it up. Followed all the instructions, but when it goes finish it, it just spins and spins. It looses it. Does this have something to do with the security level I have set up with extreme?
Here is a case of me followng the instructions EXACTLY as it says to do on the product setup but it just NOT working. Ususally things do just work. Not in this case.
Help please?
Thanks.

Here is some more specific information about the problem I am having. After setting up the AirPort Express, here are the messages that pop up.
"The settings for this base station have been successfully updated. You can close this window or wait for the base station to restart."
As this message appears and the gear under it spins... (I wait as the message says to...) the green light on the Express comes on for about half of a second before it turns back to solid yellow, then to flashing yellow, then about 3 minutes later, this message comes up:
"AirPort Utility was unable to find your base station after restarting. The settings for this base station have been successfully updated, but there was a problem re-joining the wireless network or finding the base station. You may need to select your network from the AirPort menu and try again."
Though I am not totally sure what they mean by the "AirPort menu" I can seem to find my Airport Express anywhere. In fact, the only way I can get it to be discoverable again is to do a factory reset. Then my computers can see it. But if I follow the setup as I did, when all is "set up" my computers NO LONGER SEE THE AIRPORT EXPRESS. The light on Airport Express is now slowly flashing yellow. After the factory reset, it flashes yellow but when I click on the airport icon at the top, it does see the Airport Express. After I set it up, NO SEE it.
HELP please:-)
Adam

Airtunes/airport express not working with MacBook

I have a new Macbook and an older Powerbook. The Powerbook is working nicely with my airport express and airtunes. I copied all settings to the new Macbook and configured it the same way, I also did the firmware update.
ITunes found the airport express, connected and I could listen to the music.
Later during the day it didn't work anymore, although I didn't change any settings. ITunes can no longer connect to the airport express, the airport utility does find the base station, but I can no longer configure or reset it.
I started the old Powerbook again which is still working without problems
What can I do to get the Macbook working as well ?

Same issue here!! Everything working fine with OS X Tiger. As soon as I upgraded to Leopard the problems detecting the AX started. The setup I have is the following:
-Linksys wireless router
-AX connects to wireless network to play songs through iTunes and to print via USB printer.
The green light on the AX is solid which means that it is connecting to the existing wireless network just fine. The problem lies with Leopard detecting and connecting to the AX. I have tried just about everything over the last few days and nothing seems to work. Some resets and updates let my macbook detect the AX for a little while but then it starts to drop and cannot be detected anymore. Apple HAVE to do something about this. These are two apple products not communicating properly. What ever happened to the good old days of apple products being so user friendly and "plug-and-play"
Disgruntled Mac user

Airport Express Stops working when broadcast is turned off

Router: Linksys WRT54G version 2
Using: Airport Express
Purpose of Airport Express: To enable wireless speakers.
After a lot of trouble with the router and eventually having to update all router firmware, changing the type of security the router was working, etc I finally have the router up and running.
Everything is working fine but the last step I'd like to do is not have my SSID broadcast. As soon as I stop broadcasting the network the extreme loses it's connection.
The audio bridge I used before (Sondigo) hasn't updated it's drivers for windows 7 in months so I switched to the airport express but the audio bridge didn't need the SSID to be broadcast to work once it was connected to the wireless network.
Is it possible to have the SSID NOT broadcast and the extreme to continue to extend + broadcast the wireless speakers?
Thanks!

Welcome to the discussion area, Carl M!
You'll enhance your chances of the AirPort Express joining the hidden Linksys network if you "hard reset" the AirPort Express by holding in the reset button until the amber light blinks more quickly, then release.
Configure the Express again to "join" your Linksys wireless network. Since the network will not appear as a choice to join, you'll have to type in the exact name of your network, security and password to give the Express the best chance to connect.
This procedure will sometimes work, sometimes not. Might be worth a try.
Message was edited by: Bob Timmons

Airtunes, Airport Express no internet

I'm trying to just use my airport express to run Airtunes wirelessly. I'm not using it for internet but I can't seem to find a way to do this. I'm pretty sure you can do this but Airport Utility wants me to create a wireless internet connection. Can somebody give me a hand here?
Thanks

The easiest solution would be to have the AirPort Express Base Station (AX) configured to "Join a wireless network." In this case, you would have to have an existing wireless network the AX to join. If you do, I can provide step-by-step instructions on how to configure your AX for iTunes streaming.

Airport Express Stopped Connecting to Internet, but Computer Says It Is

Hi,
I usually can find answers on these forums, through FAQs and troubleshooting, but this one's got me stumped. I've got an Airport Express Base Station. It worked great and then one day - it stopped working. Literally, I was online until about 12:30am, went to bed, and then at 10:00am the next morning all was lost. In the airport status in the menu bar, both my laptop (running 10.4.11) and my husband's (running 10.5.x - not sure which)show the base station is connected and working. In Internet Connect, it says the base station is working. But I cannot connect through Firefox, Safari or iChat. I know its not the cable modem because right now I'm directly connected through the ethernet line (and obviously it works since I'm on this discussion board). I've rebooted, my machine, the Airport Express, the cable modem about 20 times, in all different sequences, with the same results. I tried troubleshooting through Network System Preferences and still, a no-go. The funny thing is, if I plug in the printer and the ethernet line to the Airport Express, I can't connect to the internet but can print just fine. I've also tried to reboot the base station to Factory Settings and it doesn't seem to be doing that (plug it in while putting a paperclip in the reset button). Is it broken? Did it fry inside? Anyone have any suggestions? Help!

Well, to anyone else that may have had this problem, I was able to reset the base station to its factory settings. Turns out I wasn't holding the reset button down long enough (duh). Went through Airport Setup Assistant and everything's working fine now. Phew!

Had a Airport Express connected to my stereo and it was working. I brought an Airport Extreme and suddenly it took over and Airport Express stopped working and disappeared from Airport Utility. What I am supposed to do? ar2ro

I have an Airport Express connected to my stereo and it was working without any problem.
Recently I bought an Airport Extreme to use it as my Base Unit connecting it to my DSL.
I followed the instructions of the Airport Utility, and it started working.
Suddenly, problems started happen the Airport express that was connected to the stereo , stopped working and it disappeared from the Airport Utility area , as it did not exist in the network. I tried to reset it but it did not appear in the Airport Utility page.
Apparently I have other problems with the private network that it created because I cannot use it because of problems with the password that was created. I can only use the network that I created for my guest...
I dont know if my problem is a configuration problem or there is problem with the equipment.
I read that other users where having the same problem with the Airport express , using non apple equipment as their base unit , but I thought that using the Airport Extreme was going to be compatible and no problems would happen.
What should I do?

Common Problem. Common solution.
Connect your Express via ethernet cable to the Mac while other network connections on the Mac are switched OFF.
After the Express shows up, change the settings of the Express to join the existing network. Take the appr. settings.
Unplug and reconnect your Mac to the network.
Check if the Express shows up in Airport Utility
Alternative solution:
Hardreset the Express to factory settings
(while on power push the Pin next to the audio plug with a paperclip. Plug out the Express still holding down the little button then replug the Express to power and release button)
After that, the Express will show up in the Airport Utility.
Make all needed settings.
I would prefer the first solution, its easier just to plug a cat5 cable.

Airport Express stopped playing music and iMac doesn't see it

I had set up an Airport Express to stream music from my iMac to my stereo. Worked well for a day or two then stopped. I tried to re-establish the connection but Airport Utility doesn't even see the Express any more. I tried the reset button on the bottom of the Express but that made no difference. When I plug in the Express the green light shows briefly, then steady amber for a few seconds followed by flashing amber. The Express is within range of my network but to make sure I tried plugging it in to an outlet a few feet from my router. Airport Utility still didn't see it. Is my Express toast or am I missing something? Oh, yeah, I'm using a Belkin router but that didn't seem to be a problem when it all was working.
Appreciate any help.

Hi Lowell,
I spent some more time with this last night and was able to get back up and running, albeit with some oddities.
I had previously tried a reset with the AX unplugged. I finally realized how silly that was and did another reset with the unit powered on and right next to the iMac. After some hesitation, it was seen and recognized. I was then able to set it up in the livingroom, connected to the stereo. For some reason, when I first tried that after the reset, the iMac once again didn't see it. I brought it back to the desk, did another hard reset and set it up all over again. This time it worked although I can't for the life of me figure out what I did differently.
Oddities:
When I first reset it, the AX went from solid to flashing amber. When I got it playing with the stereo, no light at all showed. When I got up this morning, the unit was showing a steady green light. I don't know what that's about.
While it plays strong and true much of the time, there are dropouts. Sometimes these last only a second or two but other times can last for up to a minute, with some raggedness upon re-establishing the connection. Do you know of any way to overcome that?
Thanks for the help.
Michael

Airport Express stops sending emails suddenly

Hi. I'm using airport express 802.11g, and mac mail (OSX 10.7.4).
Last week it just stops sending emails from one of the server providers i use.
I'd already tried everything...reseting, creating new mail accounts, changing, repairing permissions, restarts and so on...
what I find out:
1. if I plug the ethernet cable, it works
2. when using mail over wifi/airport, the 'send' works for @hotmail, @gmail...but doesn't work for my other server emails
3. even thou, if I try to check emails using my server webmail, it works!
4, receiving emails works perfect
5. even when trying the wifi over my iphone, it doesn't send either.
resuming:
problem: send mail, over wifi, just with my 'dreamhost' server mails
weird!
but it's been days I've been trying to find out what is going on, and no clue!
I hope someone could help me!
it used to work just perfect, but...
thks
paulo.
airport SN#
6F80745YU4S

have you checked for _*wireless interference*_ ?
download iStumbler (does not work on 10.6) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
any improvement ?

IPhone 3G S doesn't work AirTunes (Airport Express)

Hi -- I've been using the AirTunes capability with my 1st generation Airport Express in conjunction with my 1st generation iPod Touch both 2.0 software and the most recent 3.0 software update. Both software versions work great -- no problems.
I'm trying to do the same thing with my new iPhone 3G S and my wife's iPhone 3G S, but it's not working for either phone. Has anyone else experienced a problem, too?
1. My mac is on the wireless network.
2. The phone is on the wireless network
3. iTunes can see the phone
4. I entered the pairing passcode into iTunes
After I enter the passcode, spinning icon on the phone just spins and spins while my ipod touch using the 3.0 software will connect instantly.
Thanks for your help!
Evan

Have you downloaded the Remote App? Wouldn't it be better for your iPhone's battery life to just let iTunes play the music over AirTunes? I'm kind of confused as to what you're trying to do.

Airtunes/Airport Express stopped suddently..

Similar Messages

Maybe you are looking for