Airtunes - Analog and Digital output at the same time?

Howdy,
This may seem strange to ask, but can the Airport Express output audio in digital and analog formats at the same time? Is there a strange splitter cable that could do this for me?
I recently learned that most AV receivers with digital inputs cannot output digital sources to their analog zone 2 outputs. The usual work-around is to connect their digital sources to the receiver by both analog and digital cables.
Mikael

I just learned the same thing. Does connecting the digital and analog connections to your reciever work ? Did you connect them to the same source or assign different sources for each? Thanks,

Similar Messages

  • Digital input and digital output at the same time

    Hi all
    I have a PCI-6503 board. I have done 2 task that run simultaneously: the first one is port0_16 output and the second one is port2 input.
    I get sometimes (not every times...this is strange...) error-200587 saying:
    'Requested operation could not be performed, because the specified digital lines are either reserved or the device is not present in NI-DAQmx.
    It is possible that these lines are reserved by another task, the device is being used through the Traditional NI-DAQ interface, or the device is being reset. You might also get the error if the specified resource is currently in use by LabVIEW network variables bound to the DAQ Channel, or if the DAQ Channel is being used in any OPC Client software.
    If you are using these lines with another task, wait for the task to complete.  If you are using the device through the Traditional NI-DAQ interface, and you want to use it with NI-DAQmx, reset (initialize) the device using the Traditional NI-DAQ interface. If you are resetting the device, wait for the reset to finish.'
    In the attached VI i have recreated the basic structure of my real VI (the error is present even here of course...).
    How can i do?
    I want to have both digital input and digital output with the same PCI-6503 every single cycle... Is it possible?
    Please help me!!!
    Kind regards.
    I love the smell of napalm in the morning
    Attachments:
    DIO simultaneously error.vi ‏31 KB

    Hello Maverick,
    Did you have any luck with the example Raven sent you?
    In Raven's example, it properly passes the DAQmx task from one SubVI to another to avoid having to open the task again. These errors are likely to occur when you have multiple DAQmx calls in a VI that call the same task again without clearing the previously opened task. If at any given time you try to open a task that already is being used, you might receive an error "resource is reserved"... similar to your original example.
    If you are interested, here is an awesome link that gives a detailed explanation of the LabVIEW dataflow paradigm
    Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
    Thanks and good luck!
    Jordan Randall
    National Instruments Italy

  • Acquire Analog and Digital inputs at the same time with 6025E card

    I have 6025E DAQ card, all the analog channels are used
    up. There are several digital signals, such as flowmeter. Can I acquire both kinds of data at the same time with my 6025E card? Thanks for your help.

    I suggest you search the examples that ship with LV
    Digital
    Find Examples>>>Hardware Input and Output>>>Digital Input and Output>>>8255
    for doing each type of I/O seperately.
    When you have found two examples. Just try to run the two at the rate use need in your final app.
    Post follow-ups Q's here. I am not personally familiar with that deveice so I can not speak from experience.
    I would generally expect that if you sample rate is low (i.e. <10Hz) you maybe happy with the results. If you want to run faster or have the PC do something else at the same time, the timing of the signals form the DIO lines may be suspect.
    So...
    It depends.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Using internal Speakers and optical Output at the same time ?

    Hello,
    is it now possible to use the internal Speakers and optical Output at the same time ?
    Is this a software or hardware limitation ?
    Every day im disconnecting the optical output. It can't be good for the contacts. I wont spend over 100 euros buying an external soundcard to solve this problem.
    Any Ideas ?
    Thanks ? best regards
    mc
    IMAC 24 Intel   Mac OS X (10.4.8)  

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    Alternatively, you can change the status to Answered.
    If we use the forums properly they will work well...

  • G41TM-E43 - DVI and HDMI output at the same time?

    I am looking to output to 2x 1920x1200 displays...nothing 3D and nothing that needs to be decoded...just some power point presentatinos and some flash within a browser window.
    I am pretty sure the resolution isn't going to be a problem, but using both the DVI and HDMI ports at the same time is something I am concerned about.  I am looking for people with actual knowledge that this works...no guessing please.
    Regards,
    Dan

    Quote
    I am looking for people with actual knowledge that this works...no guessing please.
    The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
    But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
    http://support.msi.com
    But please do post back with the answer, as this could be useful for others in the future with the same question.

  • Write to serial port and digital port at the same time

    hello,
    I need to write to the digital port and the serial port at the same time. Right now I have the two vi's (to write to the serial port, write to the digital port) in the sequence structure. First I write the digital port, then write the serial port. Using the oscilloscope, the interval between these two executions is 10 ms; and I need to reduce this interval to as small as possible. I would appreciate help in any way. Thank you.

    Hello;
    This is a little tricky. Since the transition from one sequence to another is completely Software timed, and windows manages all tasks that are running at one given time, there isn't a method to reduce that transition time.
    The most you can do is try to optimize your code so all the time expent on the transition is due only to the task management.
    Hope this helps.
    Filipe A.
    Applications Engineer
    National Instruments

  • MOVED: Re: G41TM-E43 - DVI and HDMI output at the same time?

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=144229.0

    Quote
    I am looking for people with actual knowledge that this works...no guessing please.
    The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
    But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
    http://support.msi.com
    But please do post back with the answer, as this could be useful for others in the future with the same question.

  • Can I Use HDMI and Thunderbolt Outputs At The Same Time? And Mac App Store Issues

    I have a Mid-2011 Mac Mini. I am currently using the HDMI output with an HDMI to Digital Input for a dell monitor. If I wanted to have a second monitor, can I use the Thunderbolt output with a MiniDisplayport to VGA adapter? I know it may sound a little unclear, so if you need a clarification, pelase let me know.
    Also, on the same macine, I am having trouble connecting to the Mac App Store. My internet connection is working, and I've tried going into the Keychain Access and there isn't anything with a blue plus. When I go to Store --> Sign In , the sign in widnow doesn't appear.
    Thanks
    Joey

    Yes, that is exactly how to use dual monitors.
    Optionally:
    if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
    or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
    In Quick Links try Account if Sign In does not work.

  • Re: H57M-GD65 - DVI and HDMI output at the same time?

    Hi..,
         apollos here.  I also am preparing my m.b.  retired my 2.5 yr old abit fatal1ty f190HD matx  m.b to try this (MSI H57M-ED65 w\i5 661) My plan is port out all three 'display port, 'hdmi' and sub 15.
    (L.V room hdmi projector, kitchen display port monitor, bedroom vga.)  hdmi no change to L.V., vga to bedroom same.
    ? distances only concern is 'display port' signal....it's about 20ft. Any confirmations?
    thnx,
    apollos 

    Thnx moderator henry (for the sep)
                                                           1. I didn't really 'get' the 'iX' syntx for  the topic .....so any 'i' series socket....yeah makes sense  .....maybe put a couple '' for denotation. and a space bar. 
    2. re: hjking....wasn't intentional ....just typed....'h57m' in the 'search' box.  the ' G41TM-E43' only one that came up; so I ran with it.
    this is more appropriate though.
    m-xmas; h-nyr!!!

  • AirPlay Mirroring and Output via Digital Adapter at the same time

    Hello,
    Is it possible to use AirPlay Mirroring to an apple tv and the digital Adapter at the same time?
    We want to get the Screen on a beamer and a tv at the same moment.
    If this isn't possible are there any chances to get AirPlay mirroring working on two Apple TVs at the same time?
    We are using the newest iPad Air
    Greets

    Unfortunately not. One output is supported at a time. But perhaps you can use some sort of an HDMI signal splitter? I've not tried it, and perhaps it won't work at all, but you might try outputing directly to a splitter that then can be connected to both a TV and beamer.

  • How can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

    how can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

    Read this Tutorial
    http://zone.ni.com/devzone/cda/tut/p/id/3615#toc3
    And also refer to this link where You have repeated this question.
    PS: Please stick to one thread. That way, its easier to keep track of your query and answers

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • Is it possible to output to div monitor and s-video at the same time?

    I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

    This is not possible with a mini.

  • How to get the sine wave sample of the input and output in the same time?

    I discovered that the samples were acquired did not in the same time in my vi.Could you tell me how to get the sine wave sample of the input and output in the same time?
    Output:9263;
    Input:9201
    Attachments:
    singal requency.vi ‏104 KB

    Hello Yun_Zhu,
    Your VI looks like you started from an example, and you are on the right track. 
    To clarify are you trying to synchronize the input and the output waveforms?  If you you will need to share a time base and a start trigger.  Check out the synchronization examples from LabVIEW
    Anthony F.
    Product Marketing Engineer
    National Instruments
    Attachments:
    HIODAQmxSyncMultiDev.png ‏70 KB

  • How can I open two screens of Adobe digital editions at the same time?

    How can I open two screens of Adobe digital editions at the same time?

    I doubt that you can. Doesn't the Sound prefpane require you to select just one output device?

Maybe you are looking for