AirTunes and Video

I have an Airport Express that is connected to my stereo so that I can play my itune songs through the stereo. All this works fine and has good sound quality.
But, when I try to play the sound for a movie from iTunes or music video on iTunes the sound no longer plays through the stereo, it comes through the computer speakers. Does anyone know why this happening and what I can do to fix it?
Please help.

As mentioned prior, I have the video coming up fine (and pure audio files from itunes), but not the audio from video files
Again, it's because it's not supported. (ref: iTunes: Movie sound does not play through AirTunes)
Based on what you are trying to do, you may want to consider the Apple TV.

Similar Messages

  • Airtunes and computer out of sync

    this is maddening. I have restarted the airport express (n version) and my computer. when I stream music from itunes just to the airtunes speakers, it 'hiccups' every couple seconds, skipping over tiny chunks of the music. this happens with any content, recorded music and radio. when I switch to my computer only, it's fine. this did not happen until very recently.
    then I play it through both my computer and airtunes, it's just a complete wreck. the airtunes speakers skip and hiccup while my computer is fine. what is the problem here, apple!?!

    Hi there
    We have downloaded HDVSplit and it works brilliantly thanks - audio and video now in sync!
    Another question .. it seems to output AVCHD rather than HDV .. can't seem to see anywhere to change the output format?
    We are a bit worried that we might run into problems editing as we are producing a 45minute feature taking in approx 8 hours worth of footage ..
    We are hearing stories that native HDV has a lot less overheads than AVCHD. Plus it seems a shame to have HDV footage which is compressed to AVCHD to edit.
    In saying this we have found that the AVCHD rendered by HDVSplit seems better than other AVCHD footage we have viewed downloaded off a Sony CX12 camera, which is good news.
    We have heard that Sony's DVGate works in a similar way to HDVSplit but retains the HDV format -- but as yet haven't located a Win 7 version.
    We do have a CD with "Picture Motion Browser Ver 2.0.17 for HDV camcorder" not sure if that would work?
    Kind regards
    Jen

  • How do i share media (music and videos) between all of my devices?

    i currently have (and attempt to use as much as possible) the following devices:  macbook pro 15", ipad 4, iphone 6 plus 64 GB, and appletv 2.
    i would love it if these devices would talk to each other correctly.  first came the macbook, and i took an internal 2 tb drive cannibalized from my previous pc and transformed it into an external.  that drive is desinated as my media drive, it includes all of my video and music.  the macbook and the appletv talk to each other flawlessly.  every music and video file on that drive is accesible to me using apple tv. 
    next up is the ipad, which includes some of my videos (movies), but no tv shows.  music also does not show up, only options to buy from the store.  but i already have a music library that includes many songs downloaded from the store that dont show up, only some stupid U2 album that i never downloaded.
    finally, we get to the iphone, which i just got.  i get no shared music or videos here at all.
    by the way, all settings are set to share with each device in settings and itunes.  each device talks to one another.  i know this because there is some level of sharing on each device (ie ipad gets videos, iphone shares spreadsheets and other productivity files.  appletv shares everything.  i now want to sync these devices so that they can share the same data while on the same home network.  i should be able to do this, right?
    also, i know that i can airdrop/transfer but thats not really what im looking to do atm.
    thanks
    spencer c

    im more than a little disappointed here.  can anyone recommend another forum please?

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Please HELP!  My kid wiped my iPhone5 and I need to get my photos and videos off it!  I have no backup with iTunes :((  Is there a way to scan the device manually?

    hi,
    New to this, so go easy on me.  I recently got my first iDevice - an iPhone 5.  I've used it for a month now and I have to say I love it. 
    But, I gave it to my kid this morning to look at.  It was locked, so I assumed it was safe.  WRONG.  5 mins later, I returned to him and my lovely iPhone5 was at the setup /pick your language screen!  Looks like he entered the password incorrectly too many times and wiped it.
    Now - I thought it would be fairly easy to recover the data and the apps - but it turns out this is not the case.   I was never prompted to install iTunes and sync the device - not in the manual, not on the device when setting it up - so how was I to know that that would be my backup.  I checked iCloud at a suggestion of an IT pal - nothing there, despite knowing that I had a Photo stream enabled.  I may have disabled it only recently, but not sure if I can manually turn it on again?
    Anyway - is there a way to manually scan my device and grab my all important photos and videos?
    Cheers for any suggestions!

    Hi Michela27,
    Thanks for visiting Apple Support Communities.
    If you have content on your iPhone that isn't on your computer, the best thing is to use the advice in this article to transfer it to your new computer before setting up sync:
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/HT1209
    Cheers,
    Jeremy

  • I really need emergency iphone help- please- it has gone into restoration mode and wont come out unless i click restore- if i do will i loose all my photos and videos etc? please help!!!

    i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
    what should i do anny coments or ideas please let me know!

    The first step in the upgrade process is a backup.
    Did iTunes not create a new backup when you first connected it?
    You really should be syncing your device and copying pictures off of it on a regular basis.
    Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
    At this point, you only option is to restore.
    Also, in the future, ensure your laptop is plugged into external power before starting upgrades.

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

    I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

    this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

  • I tried to sync my iPod touch to a new laptop and it deleted all of my music and videos. I called tech support and they told me to email iTunes and they would give it back to me. How do I do this??

    I  tried to sync my iPod touch to a new MacPro laptop and it deleted all of my music and videos. I called tech support and they told me to email iTunes and they would give it back to me. How do I do this??

    Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
    As IO said before:
    You can redownload most iTunes pruchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I do not think it included audio books.

  • I need to know how to download all photos AND videos from 2 "libraries" within Adobe Revel. Please help.

    I was quite angered last night when I posted the first time, so lets try this again:
    Here is my setup:  I have adobe Revel on my Mac and iOS devices and it has worked quite well to be honest until I recently realized my photos and videos are basically trapped within the software. There is no way (that I am aware) to export all photos/videos or any kind of tool to pull the raw data out of the app and put it into say iPhoto or Lightroom.
    Since I am not a fan of this sort of lock-in, (something I despise and encourage companies never to do), I am sadly going to cancel my Revel account once I get this sorted and store my photos elsewhere. This is a huge missed opportunity for Adobe, as the money is not an issue - its simply that the quality of service I need just doesn't seem to be there for this product.
    So here is what I am trying to achieve:  I simply want every one of my photos and videos to store on my hard drive like the old days.  I don't care about folders or hirarcy or any kind of organization - I can do that with the metadata later. I simply want all of my things. 
    My hang up is in that I have already tried methods like "Show package contents" in the photos/adobe revel route and that works to an extent, but is incredibly cumbersome as I have to sift through all of the many folders.  If that were the worst of it, I might be ok.  But what is truly alarming and making this difficult is that I don't know where on earth the videos in Revel are actually stored.  They show up in the application and I could export them one by one but I literally have hundreds.  I can't find the actual files on my Mac anywhere.
    Is there anyone at all who can help with this?  The goal is to make this transition fairly easy and I feel that Adobe has very intentionally made it very difficult to consider leaving. I spend >$50/month on Adobe services and I am a little in shock this application seems so poorly designed for anything other than just dropping your photos into it.  Please, please help if you can.  I would be so grateful as Adobe customer service doesn't seem to know or care much about supporting this product.

    Hi KDT
    Yeah. I agree, if you are used to a situation where "it's on the cloud AND synced down to your hard disk where you can get it" Revel is not exactly that. There were legacy decisions behind that - most not as sinister as you might think but I won't bore you with those details.  AND yes you are correct. We currently don't have any way for you to wholesale download everything at once. So you aren't missing anything. Until we provide that mechanism I can provide some guidance.
    I'm going to assume you have the current version of Revel on your Mac which is 2.0.
    The easiest thing for you to do will be to export your files manually. You can actually select a range of files and export. So it's not a one by one thing.
    You'll have to decide how best to perform the selection based on your photography habits. If you tend to take batches of files surrounding specific dates. You could do it by date. In the date view (In the applications upper right "Showing: Dates"). If you look at the end of a date row you'll see a small grid. If you click that grid you are taking into a grid view of just that date. If you select all and file>export you'll export the contents of that date.
    The other option is remaining in Grid view (In the applications upper right "Showing:Grid") and perform a shift+selection where you select your first file, move down the desired range and while holding shift you select a second file (standard multi-select stuff).
    One thing to keep in mind as you do this. You'll notice when you export you can export original or 'current version'. Export original does just that. Exports unedited original versions of your images as they were uploaded to us. When you export the current version of an image we'll export a rendition of the edited image. This "current version" image is not the original and in most cases will be a rendition that is not the same size as the original. So keep that in mind as you proceed.
    Not ideal, I fully realize, but I do hope it gets you closer to having your images back on your hard disk as you desire.
    As for your subscription. Assure you have checked your iOS Appstore subscription settings and set Revel to not auto-renew. Unfortunately for a pro-rated refund on the subscription balance you no longer desire you'll need to work with Apple as they hold the purse strings for Appstore purchases. Refunds haven't been a problem in the past so you should have no issue.
    Hope this helps.
    Jason

  • Help needed for a new Mac user with his photo and video librarys

    after swopping my Ericson for an iphone a year ago. then taking delivery of an iPad on launch day. I have finally taken the plunge and swopped my windows pc for a lovely 27" iMac... what have I been doing all these years using windows? using the Mac is a joy.
    As I get more involved with their products I am constantly fascinated (and frustrated) by Apples way of doing things. this situation is no exception and I need Apple people with Apple experience to help me make a decision. 
    I am looking at software to organise my photos and videos. I have approximately 7000 photos residing on a windows home server. in addition to that there are some 200 or so HD videos taken with either my Sanyo Xacti camcorder or Sony DSC W300 camera. both cameras I think produce MPEG format
    my first experience was iPhoto. great for the `price' but not very flexible. single libraries, poor editing facilities. and because I have files referenced and not copied to my iPhoto library, if I deleted from the library its not deleted from the server (and vice versa). this leads to images being displayed in the library that don't exist etc.
    then I downloaded the Aperture 3 trial. great until I came across the `Unsupported file format' situation with the MPEG videos that strangely enough, iPhoto will recognise and play (the Apple way of doing things).
    1. should I put the photos on the Mac instead of the server?
    2. Is there a better way of managing the images for deletions etc
    3. should I stick with Aperture because of the editing
    4. is there a better software or way of managing the videos
    sorry for the ramble but its all new to me

    had a good session on all three of the recommended programs and now have a better understanding of the excellent advice I have been given.
    iPhoto
    great `free' program that is easy to use but somewhat limited on features. think I would always be looking to upgrade from here (feels a bit boring)
    Aperture
    really enjoyed using this but at £170! a hefty price tag considering its limited file support. fortunately its only my camera video clips (MPEG) that it wont view. my camcorder files (MP4) are fine so this is looking better as a one stop solution.
    Elements
    much more than just a image touch up. considering what it can do.. very good value at around £60. teamed with iPhoto it becomes even more attractive.
    My issue still remains with the masters file location.
    I would prefer to keep all my media on the external server to ensure I have a fail safe recovery option. its a 4TB 5 disk affair which contains all the family music, video images and DVD's etc (likely to change to a Mac server in the future!)
    one feature that I cant find, (even in Aperture which surprises me), is the ability to automatically manage deletions from referenced locations? i.e. delete a file from the server and when aperture opens up the thumbnails are updated. or, delete a referenced master in Aperture and an option comes up to delete the referenced file on the external drive.
    how would a professional photographer or studio using Aperture manage this process (or would they use something else?)
    forgot to mention that through our student facilities i can get a discounted copy of Photoshop CS5 for around £175 which is close to Aperture. is this a worthwhile option or overkill
    Message was edited by: buttons129

  • Music and Video won't sync to iOS 6 devices

    Hey guys, just updated both my iPhone 4S and iPad 3rd Gen to iOS 6 yesterday and I've been having a fun time with all the features (albiet buggy obviously), but I've come across a very frustrating issue. Late last night while trying to prepare all my devices so that they are clean and ready for today without issue, my iPad and iPhone's memory free space was quite vast. A lot larger than usual, yet iTunes was saying that everything was on both devices.
    Well I checked and my iPad had NONE of my music on there. Well I searched around to find that the iPad actually had only NON-DRM labled songs in the library. Same with my iPhone. Well I was confused because of all things you'd think it to be the opposite. Well regardless, I wiped all music from the iPad and tried a clean install of all music, well that didn't work. I then tried manually dragging songs in and that didn't work. I then tried checking the manually manage stuff box and THEN tried moving music in. Still, squat. Nothing was working for some reason. Even directly moving stuff in there wasn't working. All of my Apps went in fine and my ringtones went in fine (yes, on both devices), but my music and videos would not.
    Really odd predicament and it's quite annoying considering I use my iPad for part time mixing and DJ'ing for electro/house, dubstep and trance. I have quite a library I need on there but I can't seem to get any of it on there.
    Though I did manage to make it worse. After wiping my music from my iPad, NOTHING will go on there. No videos, no music, not even the NON-DRM encrypted songs or movies. It's crazy. At least my phone has some of the music. It SAYS that all of the songs I chose to load on my iPhone are there, yet when I click to play them, my iPhone just instantly skips them. Don't know what the heck is going on and I could totally use some help.
    On phone with dev support now and the lady I talked to wasn't even aware that the dev forums in the dev center were down and just checked around to see when they were going to be back up and I was told "in a few hours hopefully, or in the next 24 hours at the latest".
    So yeah, any help guize?

    hey there i jus recently discovered, all you have to do is highlight the music u want and drag it to ur iphone or ipad tab, ios 6 is just a beta, and it comes with common little flaws like this, but i just kept trying and i noticed it didnt have a option at the bottom of summary to manually manage music; it was changed to manually manage music videos, then i remember when the ipod frst came out we had to drag and drop files so i tried that and it worked, so lemem kno huw it turns out for u

  • Purchased music and videos not playing on ipod!!!!

    I had an ipod and bought a video ipod recently. I forgot to put in the disc that came with the new ipod, and now all the songs and videos I bought from Itunes Music store wont play in my ipod. By wont play I mean I try to play it and it goes to a black screen, sometimes for 30 seconds. I have tried restoring my ipod but it did not work. Please help

    Did you update the firmware on the iPod? Supposibly if fixes a few bugs.
    http://www.apple.com/ipod/download/
    If you didn't then try that. Believe me your problem is not with not using that CD as I never even popped the disk in my CD drive untill after I had updated my iPod as the software was outdated before it arrived at my house.

  • HP Pavilion 15-b174eg glitchy sound and video

    Hello there,
    I bought my ultrabook a few months ago and after sending it back once I am still having the same issues. It uses Win 8 64 bit. I read stuff on this forum about unplugging the AC to fix the glitchy problem, unfortunately it works only when it wants to. Sometimes it doesn't care if the AC is in or not. I tried restoring to factory defaults and that lead to a new series of problems since the original software on my recovery partition was corrupt. Regardless, all I want is to be able to listen to music and watch a movie without having to hope if or when the audio and video starts glitching. 

    Unthorned,
    If you haven’t had your computer for over a year then you should still be covered under the manufacturer warranty. If you aren’t sure about the warranty insert the computer information into his link to confirm your warranty status.
    You may be best served to contact the HP support for a possible repair if deemed necessary. If you reside in the US or Canada the number is 1-800-474-6836, if you reside in another country click on this link and select your country and then select on “technical support after you buy” and the number will be provided.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • PSU and Video card upgrade for HP e9280t

    Hello, I wanted to upgrade my PSU and video card. The PSU I would like to get is the SeaSonic S12II 620 Bronze 620W (http://www.newegg.com/Product/Product.aspx?Item=N82E16817151096&Tpk=17-151-096) but I wasn't sure if my computer could handle and hold the PSU. The video card I would like to get is the EVGA 01G-P3-1561-AR GeForce GTX 560 Ti (http://www.newegg.com/Product/Product.aspx?Item=N82E16814130604) but im not sure if my computer can handle this too. I have a HP Pavilion Elite e9280t CTO Desktop PC (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4066665) can someone please tell me if I can upgrade to the PSU and Video card?

    Stuart, welcome to the forum.
    The truth is, any video card that will run properly with the 300W PSU in the computer, will not be much better than the integrated video.  Most newer mid-level cards require a PSU with a minimum of 400W watts.  I have searched for other members many times without any luck.  If you want to upgrade the PSU, it will give you far more options.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for

  • Add a new Components into SAP

    Needs to Add a new Components into SAP. Is any SAP tool is available to do the same.....

  • I want to install osx 10.6 but the cd drive on my computer is broken. Can I get around this somehow?

    I'm using a macbook pro from 2009 and I have the install cd fro 10.6 but no drive. So i'm kind of stuck.

  • Org Unit to Cost center relationship issue

    Hi All, When I assign a Cost center to an Org Unit, i dont have any issues and got created. But when I assign the same Cost center to a different Org Unit, it delimits the previous Org relationship and creates the new one. I checked the Relationship

  • Cannot Initialize LiveCache

    Hi All, I am going through the Post Steps of my LiveCache install manual. When I run transaction LC10 -> Enter DB Connection ->LiveCache Monitoring -> Administration ->Operating, Administration ->Initialize LiveCache, it gives me an error: 1/15/2008

  • Contact Role in Customer Master

    I have assigned following roles to the 'Customer Contact' in Customer Master. Could someone help me what all the notifications customer contact will get from OM/any other module if he has this role assigned? Or does it depend on how OM implementation