AirTunes cuts out too much

I've had AirTunes hooked up for about three months now. Sometimes the connection between my Mac and the stereo goes for the whole day without a problem. Sometimes - like today - it cuts out for a few seconds then it's back on again, repeat. Also, my Airport Express wireless connection sometimes does the same thing, on/off/repeat. Sometimes my computer can't find my Airport Express closed network; but it has no problem finding the neighbors' open networks. This problem manifests itself without regard to what time of day it is, what the weather is like outside, whether or not someone is using a cellphone or the cordless phone we have, whether or not the cable TV (we have a cable modem) is on/off, whether the lights are on, distance between the computer and the Airport Express, I have checked the connections of my Airport card, Airtunes cables, etc., etc. ad infinitum.
This happens with streaming content like an internet radio station as well as with songs in my iTunes library resident on my hard drive.
I have the latest iTunes. I have the latest OS updates.
Things I have tried with "success." Unplugging Airport Express, letting it reset. Quitting and rebooting iTunes.
WHAT IS THE PROBLEM? Is this a specific problem that I can solve with an unknown (to me) software update/upgrade/purchase? Is there a chapter in the two OS X books I have (Tiger for Dummies and Tiger: the missing Manual) that I haven't read? Is there another book I can buy that will guide me to the right solution?
Note: I am really tired of the "just unplug the cable and let it reset" answer. That's how things are solved in a Windows world. The problem with those answers is that I might have to unplug and thus reset the Airport Express several times in one sitting!

A number of things to try:
- disable WDS. WDS will limit your range.
- drop bandwidth from 802.11g to 802.11b (G service is 50 ft, B service is 150)
- try re-positioning the Airport Express base station
- change the channel the base station uses (may be a conflict with other devices in your home).
As a last resort, you can do what I did...hardwire the Airport Express...I too was getting tons of drop outs, due to 2GHz cordless phones,microwave interference, distance and number of walls traversed.
Report back on your progress & good luck!
Rob

Similar Messages

  • Airtunes cuts out between songs

    Hello,
    Sorry if this has been addressed, I've searched and found a few people who have airtunes cutting out mid-track, but mine tends to cut out at the end of a track. I have to press stop then play and it starts again - only for it to stop again after two or three tracks. It's really annoying - I keep having to get out of the bath!
    I'd be very, very grateful if anyone could help. I only set up my Airtunes network last week (I have three amps set up around a pretty small flat, each with an Airport Express attached), so have only ever used it with iTunes 7.
    Thanks very much!!
    Mac Mini 1.42 GHZ PowerPC G4 Mac OS X (10.4.7)
    Mac Mini 1.42 GHZ PowerPC G4 Mac OS X (10.4.7)

    Sorry, I can't off you a solution, but I have this happening too, but during songs. This didn't used to happen. What I can say:
    - MacBook Pro 2 GHz & PowerMac G4 466MHz
    - iTunes 7.0.1 (both)
    - AirPort Express with firmware 6.3
    - MacOS X 10.4.8 (both)
    - Quicktime 7.1.3 (both)
    The MacBook Pro is wirelessly connected to a Belkin hub that then talks to the AirPort Express wirelessly. The PowerMac is connected to the hub by cable. The wireless portion use 40 bit WEP. This issue affects both computers.
    I would try with an older version of iTunes to see if that makes a difference, but I don't have access to one, though having tried out AirFoil (by Rogue Amoeba), I suspect that the issue is either with the new AirPort Express firmware update or something that iTunes depends on, since it experiences the same symptoms.

  • AirTunes cut-outs with wired network (solved)

    To whom this may be helpful,
    There are several discussions about Music cut-outs when using the AirTunes, but all of these discussions were focussing on a wire-less connection.
    In my case, however, I have a wired Ethernet connection from my Mac to a 4-port-router, to which the AirPort Express is also connected. I got the first cut-outs about a year ago and it has been gradually getting worse, up to the point where it would cut out after every 5-10 seconds, pausing for 5 seconds. This is when I gave up using AirTunes.
    Next, nothing much happened until I noticed a few weeks ago that my network had become notoriously slow. I first suspected a degrading ADSL connection, but I changed my mind when my router died. It turns out that my network performance was gradually degrading due to problems in my router (probably bad memory, forcing it to drop packages when the checksums were incorrect).
    After having replaced the router, the network is up and running again as before and AirTunes runs smoothly again. With that in mind, you might like to test other units in your network!
    Mac G4   Mac OS X (10.4.9)  

    I buyed 2 of the Airport Extreme, never got them working fine, till yesterday...
    I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
    I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
    In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
    I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
    I hope this will help others with the cut or drop out problem

  • Airtunes cutting out wirelessly-trying ethernet connection-help

    Ihave an Imac with a local wireless network to a lynksysN router-connected to a PC.( I use files betweent the PC and the Mac) I have two airport express-one for each stereo in the home and an apple TV. I get a lot of cut outs on airtunes....so since I have the abilty to wire the house I have put an ethernet cable from the Imac to the Lynksys router. Now my internet is faster on the Mac. Now how can I play my music on the Mac via the airport express devices. When I disable the airport to the router I no longer can see mutlitple speakers, or my apple TV in my itunes. All I really want is to have my airtunes work without cutting out. I know I have all the required hardware and I just don;t quite understand how to make it all work yet. Thanks

    I am also streaming music using iTunes to an airport express from an airport extreme. I also have the music cutting in and out problem and may have just solved it tonight by changing the channel setting from the default automatic to a channel that doesn't seem to have interference. For me, that seems to be channel 1. Automatic was always picking channel 11 and that cut in and out.
    BTW, my airport express is only 70' away, but downstairs and my floors are concrete. Anybody else have such short range?

  • AirTunes CUTTING out periodically... Help?

    I originally thought iTunes kept pausing but now I've realized the signal to the AirPort keeps cutting out. The song keeps playing in iTunes but the signal to the AirPort/AirTunes keeps going all jerky, cutting in and out with annoying frequency. Could my AirPort be dying? I've had it for 4+ years now. I just reset it and renamed the network, etc. I've also tried deleting the file in my preferences but to no avail. Is there anything else I can do?
    Spencer

    Have you updated to iTunes 8?
    I did and I've had many connection problems since then. It started with my AirTunes not working, then I tried all the suggestions here: http://discussions.apple.com/thread.jspa?threadID=1701084&tstart=0
    Some solutions worked for a short time, now AirTunes won't work at all and when it was playing it was jittery, the volume control ceased to work (blared at me last time).
    All day since I updated iTunes there's been nothing but problems. I'm leaving it off now so it doesn't interfere with my Wifi connections. I have an Airport Extreme and an Express, and a few times now both devices couldn't be found (it happened while I was playing my touchy AirTunes when it was working a little bit). As long as I don't play iTunes, everything else is peachy, with no disconnections from the internet or anything.

  • AirTunes cuts out after working

    Hi all
    I have a problem when using my AppleTV as an AirTunes device. Music plays from my iMac to the AppleTV for awhile, then cuts out. If I deselect the AppleTV in iTunes as a speaker, then reselect it, music once again plays for awhile then again cuts out. This is the second AppleTV that has this issue, so I suspect it's a software issue.
    Anyone had success in addressing this issue?

    I've been having the same problem and I just found a fix that is working for me. Using iTunes 8, an Airport Extreme, and a new Airport Express, iTunes would stream to the Express but would cut out for a second every 5 seconds or so. I found an application called Autobahn (http://www.getautobahn.com/) that I observed grabbing some network activity. I uninstalled it and the problem disappeared. The file won't show up in a Spotlight search, it is invisible. If it's on your Mac, there's an uninstaller located in USER/Library/Application Support/Swarmcast (that's where it is in 10.5.5). Good luck!

  • Blue Snowball Mic cuts out/too quiet

    I bought an excellent and professional microphone made by the company of BlueMics. The model I have is the "Snowball Aluminum". Apparently when I talk with a couple of friends my mic either cuts out, or is too quite. I boosted the mic fully on my Windows and Skype settings to the highest but all it doesn't really do anything. I can't tell if my friends are just f***ing with me that my mic is "cutting out" and "too quite". I'm not sure if it is my friends screwing with me because my mic seems to be quite good for other friends, or very clear when I am using Sony Vegas Pro for videos. Would I probably need one of those muffles over the mic or whatever they are called to center the sound waves from my voice to the mic, or a program that can  boost the mic sensitivaty more. I tried moving the mic closer, it made it more clearer than where I had it before, but apprently it is "still to quite or cuts out". Help would be greatly appreciated.

    You are very limited what you can do with USB audio/recording devices.  You can try the device in another USB port.  One that is directly on the computer vs. a hub as that can make a difference.  If you have access to another PC run the tests yourself to another Skype account.  That way you can rely on your own judgement and not your friend's.  Other times audio issues can be due to the Internet connection/routers between the two of you.  I had one of my contact's claiming I kept cutting out.  Skype technical details stated my audio was being relayed.  With my contact's permission I remoted into his computer and router and updated it to the latest firmware.  After that I had a direct connection (not relayed) and the audio no longer cut out on my end for that contact.  In some cases, ff your Mic volume is set too high/sensitive that may cause issues as well, so you might actually try lowering it to see if that make a difference.

  • AirTunes cutting out

    When streaming music from my iTunes through my AirPort Express to my speakers, I'm encountering a recurring problem. A song will play through the speakers for a minute or so, and then cut out, and then the AirPort Express will start flashing orange. I've hit the reset button a number of times to no avail. Any advice?

    Firstly, ensure you've installed the latest firmware on both base stations (released a few weeks back) and upgraded to iTunes 6.0.2. Also that your PowerBook has the latest AirPort version installed.
    If that gives you no joy, you could try different channels on the base stations (eg. 1, 6 or 11). And try it with interference robustness on and off.
    If that's no good, check whether there are any sources of potential interference near the base station (i.e. other electrical appliances).
    As a last resort, you could try setting the base stations to 802.11b or g only (depending on your model of AirPort card).

  • Xmod: Line-out too much near usb p

    Sorry for my english, I'm italian...
    I can't connect my belkin pure AV cable to Xmod because the space between usb and line out is too small, i think this is a serious planning problem because many good quality cable present a connector more larger than standard, my question: Can I use headphone-out for speakers without differences?
    P.S: I don't use CMSS-3D

    Thanks for the reply, but I have tried it - I did state it in my message.
    I probably tried it 10 times already, no help.
    Any other suggestions?
    Thanks,
    Dami

  • HT202663 AirTunes cuts out at the same time every hour for about 20 seconds

    Since converting my iMac from Lion to Mavericks a week ago, my Airtunes network dies at exactly the same time ... 51 mintes and 35 seconds every hour after the hour. It stays down for 20 seconds then picks up again without any intervention required. (iTunes itself does not stall).
    My wifi network set up worked reliably for about three years before upgrading to Mavericks, streaming music from iTunes on my iMac to two AP Expresses and one AppleTV. I have an Actiontec router provided by Verizon/FiOS. The iMac is connected to the router via Ethernet.
    The apparently precisely timed interruption problem manifested itself immediately after installing Mavericks.
    Anybody else have anything like this?

    I fixed the problem. For anyone interested I disabled the IGMP service in the Actiontec router.

  • Final Cut Express - Too Much?

    Is Final Cut Express overkill for someone who wants to make movies using primarily still photos?

    Thanks for all the answers. I'm still a little uncertain about the various products. I've been using iMovie '08 to put together a movie composed of stills (Ken Burns effect), music, transitions and titles. However, iMovie '08 is really limited with respect to title options, transitions and it doesn't have themes. So, I tried the making the same movie using iMovie HD, which has many more transitions, has themes that are great for opens, bumpers and credits, but titling over stills is a pain because a title can't span more than one still, e.g. a lower third that I want to use for 4 adjacent stills in the timeline, which is possible in iMovie '08.
    I tried a workaround to the issues by creating an open in iMovie HD, exporting to full quality QT and importing the movie of the open into iMovie '08. Unfortunately, the quality of the image suffered slightly - it looks soft. The same was true in the opposite direction - did the whole movie with stills, transitions, music and lower thirds in iMovie '08, exported to a full quality QT movie and imported it into iMovie HD. Of course, the open created in iMovie HD looks great, but the imported iMovie '08 movie looks soft.
    So, I guess what I'm asking is this: can I accomplish everything I want by using FCE - an open, titles, lower thirds (that span adjacent stills), transitions, music, effects, etc.?
    I know that most of this won't make sense, but I'm really trying to make a really great movie from the stills of my dog that just passed away. We had him for 11 years and I want to make this movie for a great keepsake that will last forever.

  • Please Help! My transitions are fading too much audio out!

    Hello all,
    I am still using the old iMovie 08. I am just making a simple video, but in certain trasitions btwn clips, the transition is cutting off too much of the audio at the end of the clip right b4 the transition begins. I have tried playing with the "set duration" function on the transition, but it is not working out properly, and doesnt chop exactly where you want it to b/c its trying to blend all the 3 pieces together so it looks like it averages them out, chopping out whatever amounts it wants from each of the 3 pieces. It basically makes it so you can't hear the last couple words from the speaker right as the transition is starting.
    -Is there anyway to edit the transition properties and either turn off audio fading right b4 the transition -OR- to at least adjust down the amount of audio it cuts into at the end of my clip prior to the transition?
    -Or is the only thing that u can edit on transitions is the "set duration"?    THANKS!!

    It's regrettable that you deleted files without having backed them up first. The first thing you need to do is back up what's left of your data. You can do that with Time Machine or by other means, but you need an external hard drive to hold the data.
    Whatever you did delete without backups is most likely gone forever. You could send your hard drive to a data-recovery firm, but the service will be very expensive and may not recover anything. The less you do with the computer before then, the better the chance of success.
    The iPhoto library is corrupted and you won't be able to open it. You may be able to extract what's left of the images, but first you have to back up.

  • How do I cut out imported objects and make background transparent?

    Illustrator CS3.
    I have embedded a jpeg picture which I need to cut out and make the background transparent. How do I do this? An opacity mask? How do I create a mask the same shape as the object I need to cut out? The object needs central pieces cut out too. Please help!

    Opacity mask of clipping path are the two ways to do this in Illustrator. Photoshop is the ideal program for this task.

  • AirTunes times out

    Currently using iTunes 7.0.2. AirPort Express 6.3.
    Previously, I had my AX set up as a remote base station using WDS to extend the wireless network from my Linksys router. I was also streaming audio from my Powerbook to the AX to my stereo.
    A few days ago, someone else's shared music popped up in iTunes, and I realized I needed to secure my network. So I enabled WEP.
    Once I did that, I was no longer able to operate the AX as a remote base station. It would flash amber, and would disappear from the network. I couldn't configure it with Airport Admin Utility or even ping it.
    So then I tried adding it to the network as a client. This seemed to work, in that the light was green and it appeared in the remote speakers list in iTunes. But when I select the remote speakers, I get a "Connecting to Living Room ..." window that appears for a couple of minutes, then disappears, and the remote speakers selection reverts to "Computer."
    I found this article, and tried disabling IP6 on my PowerBook to no avail:
    http://docs.info.apple.com/article.html?artnum=304371
    Any thoughts? It seems things are mostly set up correctly, because otherwise nothing would show up in the remote speakers menu. I'm at a loss as to why it can't connect to it.
    TiBook 400   Mac OS X (10.4.8)  

    Okay, I really solved it this time. There were two issues:
    1. I was using the wrong MAC address. The Linksys has more than one.
    2. Once I pointed the AX to the correct Linksys MAC address, I had to also enable WDS on the Linksys to point back to the AX.
    So now it works, except that AirTunes cuts out every few seconds, but that's another question:
    http://discussions.apple.com/thread.jspa?threadID=731506
    PowerMac G4 AGP/400, TiBook G4 400 Mac OS X (10.4.8) 1st Gen iPod; iPod Mini 4GB

  • Too much volume, phone cuts out??????

    When I use my phone to record video of me singing, and then play the video to listen, my phone cuts out the volume, like it is to much for the phone to handle. Does anyone know how to fix this?

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

Maybe you are looking for

  • Hi, How to change date pattern in project panel in order to sort media according to date YYYY-MM-DD and not MM/DD/YY ?

    Hi Question is in the title I have the list of media and when I add columns from "metadata panel to the project panel, all dates are MM/DD/YY format and sort is not relevant !! Where can I change this pattern to the right one ? Thanks Emmanuel

  • ISE Guest Self-Provisioning Portal

    Hi, I  get the Guest portal page and my credentails authenticate correctly and  the device is authenticated using MAB. Then I redirect to Self-Provisioning portal and get this message This device has not been registered You need to manually configure

  • Iphone 4 Sprint contacts folder.

    Today my personal contacts are not displayed in the Contacts folder. When I send a text or email the first letters search through the normal contacts list. Therefore, I have not lost the contact list but it is not displayed in the folder.

  • Still "Not Yet Shipped"

    Anyone else have a pre-ordered iPhone 4 from launch day that hasn't moved from "Not Yet Shipped"? Hasn't even moved to "Shipping Soon". Still shows deliver by June 24. Thoughts?

  • Is it a technical issue?

    Adobe recently I wanted to download the tutorial files for aftereffect cc from (https://helpx.adobe.com/creative-cloud/learn/start/aftereffects.html) but unfortunately the file which i got from the side (that have to be tutorial files) contained a mo