Airtunes missing; no Music tab in Airport Admin Utility - Help!

Hi. Trried to play music via airtunes to AX connected to stereo, but no speaker selections in iTunes! Been working for the past year. Went to airport admin utility (4.2) for the AEBS and when configuring it showed the Music tab for about a second then it went away. I can't select Music re-setup airtunes! Where's the tab? Does the utility have a bug? What to do?
All latest s/w, etc. for AEBS, AX, Pmac, and PB. Tried the utility from both Macs, but same situation. Internet, AEBS, and AX all work fine, but no Music tab in the utility and no airtunes speaker selections in iTunes (6.0.5).
Thanks.

All latest s/w, etc. for AEBS, AX, Pmac, and PB.
Tried the utility from both Macs, but same
situation. Internet, AEBS, and AX all work fine,
but no Music tab in the utility and no airtunes
speaker selections in iTunes (6.0.5).
What firmware is your Airport Express running?
iFelix

Similar Messages

AirTunes not working, no Music tab in Airport Admin Utility

Suddenly today after a year and a half of use, I noticed that I had no remote speakers in iTunes. A trip to the Airport Admin Utility revealed no music tab. After resetting the AE (hard, and factory default), I get the same result, no Music tab in Admin Utility and no AirTunes remote speakers in iTunes. USB printer and WDS work fine. Anyone else experience this?
iBook G4 Mac OS X (10.3.9)

I have the latest version of Admin Utility (4.2) and the latest version of AE firmware (6.3). It has been working forever, I listen to streaming audio through AE every day. It is very odd that the music tab is missing from the admin utility when I try to configure the Airport Express. Like I said I tried every reset option and reloaded the firmware but I don't know what else to try. I would hate to give in to the fact that it's a hardware issue...

Missing music tab in airport admin utility...

Does anyone know how I can fix this? Can't enable airtunes but can still use my printer attached to my Airport express. I just use my airport for printing and airtunes so this is very anoying.
emac Mac OS X (10.4.9)

All latest s/w, etc. for AEBS, AX, Pmac, and PB.
Tried the utility from both Macs, but same
situation. Internet, AEBS, and AX all work fine,
but no Music tab in the utility and no airtunes
speaker selections in iTunes (6.0.5).
What firmware is your Airport Express running?
iFelix

APExp: Music Tab in AP Admin Disappears - No AirTunes

Network: Two APExpress. APEx 1-Setup for AirTunes, connected to stereo. APEx 2-Bridge-mode with attached USB printer. Stand. setup. Internet works fine, printing works fine.
Issue: No longer can access the Music tab on the APExpress. (Tab is present when opening the AP unit but is disabled/disappears after loading finishes.) Not able to select the base station from iTunes.
Attempted Resolution: 1) Rebooted base station. 2) Cycled power to base station. 3) Uploaded latest version of base station firmware (v6.2). 4) Confirmed behavior from second client machine (also PBG4). 5) Rebooted both computers and again checked Airport Admin with same (no music tab) result.
Curiously, I can see the Music tab on the second unit (bridge) where nothing is connected. However, on the main unit, the tab is no longer present.
Question: Is there something I'm missing short of calling AppleCare?
Thanks! Ben

Is there is a cabled or wireless network to which these two Airport Express devices are connected. Are they cabled to that network, or connected wirelessly?
Or, is Airport Express 1 your network's "base station", and if so is your cable/DSL modem also connected to it? If that is the case, how does Airport Express 2 (which is in "bridge mode") communicate with Airport Express 1.
The answers to those questions notwithstanding:
- do a factory reset of Airport Express 1 per:
http://docs.info.apple.com/article.html?artnum=108044
- have your Mac connect directly to the wireless network of Airport Express 1 (which after the reset will be called "Apple Network xxxxxx")
- then run the Airport Admin Utility. The Music tab should be shown

Music Tab Disappears from Airport Admin Utility

I have searched these forums and the internet for a long time for a solution to this problem only to find that this is a common problem for a lot of people. Basically, all of the sudden iTunes didn't list my wireless speakers as a possible output for my music. Thinking a setting had been changed or something I logged into the Airport Admin Utility only to find that the "Music" tab was completely removed. I restarted the AE multiple times, performed multiple firmware upgrades/downgrades, and reset the entire device to no avail.
{Post edited by Host.}
Anyways, if you have a solution, please post it here (I know there are other postings but none recent). {Post edited by Host}

Perhaps when you switch it to 5 GHz the signal loss is so great that your Mac Pro can no longer receive the signal.
5 GHz signals do not move through physical objects as well as 2.4 GHz signals.

Airport express not listed in Airport admin utility, no music

I had my stereo connected to my airport express to stream music from my imac.
Its been working great for a year. About 2 days ago I did some updates and now
the light is blinking orange and no music.
I have tried to reset the AE with a paperclip but its still not showing in the Airport Admin Utility NOR the Airport Setup Assistant.
Not sure where to go from here....
thanks Laura Drew

When I open the Airport Admin Utility, even when the AX is connected via ethernet, it is still not listed there. I hit rescan and it never surfaces. If I hit OTHER I get a screen that says 10.0.0.1 (if I remember correctly) then I put in the pw public.
10.0.0.1 would be the correct default LAN IP address for the AirPort Base Stations.
The screen says its rebooting the AX. The light turns green for apx. 2 seconds then turns back to blinking orange.
If I unplug it from the ethernet, I am able to see it under the airport icon.
And this would be normal when the AX is not connected to a network. I have assumed that your are using a Cable/DSL modem for your Internet connectivity and that you had not replaced the Ethernet cable between the modem and the AX just yet. So a blinking amber (orange) status light would be correct.
I choose it, plug the AX into the stereo but the light never turns green, and itunes says it can't find the AX.
Connecting the AX to a stereo would not change the status light. Again, remember a green status light indicates a valid network connection.
Maybe I will need to do it thru my router?? could my airport card have gone bad? but it seems I can connect to other networks (my neighbors)??
You can certainly set up the AX while it's connected to a router. I agree with you that it shouldn't be a problem with your AirPort Card.
So now I have to admit, I'm a bit baffled about your current network configuration. My confusion is, whether or not, you are using an Internet router, in addition to the AX.
Would you please confirm for me which of the following two network configurations, 1 or 2, that you currently desire...
1) DSL/Cable modem > (Ethernet cable) > [WAN port] Internet router [LAN port] > (Ethernet cable) > [Ethernet port] AX [Audio port] > (audio cable) > stereo, or
2) DSL/Cable modem > (Ethernet cable) > [Ethernet port] AX [Audio port] > (audio cable) > stereo
...or something else?
In other words, are you using the AX for both your Internet connectivity/iTunes streaming or another router for the Internet and just using the AX for streaming iTunes?

Airport Admin Utility can no longer access Airport Extreme, what now?

I have an Airport Extreme that worked fine for a long time with a specific IP. They sold out and the new company came in and installed new equipment. The settings had to change on the Airport. After that, I lost my ability to print through the Airport USB port.
I tried to resolve the problem the other day. My Airport Admin Utility saw the Airport, but I couldn't access it. When I clicked configure, a window came up saying "Reading configuration from base station", then a Password login window came up. I enter my password, it says "Reading configuration from base station", then it says "An error occurred while trying to access the base station. Make sure your network connection is valid and try again.". It does the same thing whether I enter the right or wrong password.
It started working unexpectedly for a little while. I experimented with some settings. Now I can't access it again. The Airport Admin Utility sees the Airport as 10.0.0.0, my laptop's IP says 169.xx.whatever. I thought the Airport was supposed to distribute IP addressed. It did for awhile after I set it that way, but then it went back to 169.xx.whatever.
I'm lost. I don't know how I will ever access the Airport again. Or get my printing capability back.
Help!!!

Ok. I'm going to try a reset on a day where I have some time to mess with it. There are some things I need clarified for me about settings. Please correct me as needed.
In the internet tab:
-Connect using Ethernet is selected.
-Configure Manually was selected before as it is now.
-IP address: do I use their IP or 10.0.0.0 or 10.0.1.1 or what?
-Subnet mask: It used to be 255.255.255.0 now it's 255.255.0.0.
-Router address: What do I put here, use their IP or 10.0.0.0 or 10.0.1.1 or what?
-DNS servers: I will enter their DNS servers.
-Domain name: blank
-WAN Ethernet Port is selected Automatic.
Under Network Tab:
-Distribute IP adresses is checked.
-Share a single IP address (using DHCP & NAT)used to be checked, now Share a rnage of IP addresses (using only DHCP) is checked.
-DHCP Lease: 4 hours. What is best here?
Do I really need to worry about anything else? If the password is reset how to I access from default settings?
Thanks, after this I should have a better understanding of network settings and the AEBS.
J-

My Airport Base Station does not appear in the Airport Admin Utility

I cannot see my airport extreme base station in the Airport Admin Utility nor in Airport Setup Assistant via Airport. It worked yesterday but when I was trying to set up a network something must have changed but I don't know what it is. (The setup didn't work so I am only using one base station right now.) The only way I can configure/reconfigure the base station is by physically connecting via an ethernet cable. Then no problem. I have two computers and neither can access the base station with Airport Admin Utility via Airport. I have installed the latest Airport Update but nothing has changed. What happened?

You should be able to use the second Airport Extreme
Base Station as a wireless print server. What I
suggest you do is:
1. run the Airport Admin Utility and clean up
settings on your existing Base Station:
- under the Airport tab, make sure you have not
selected to "create a closed network"
- under the Access Control tab, clear out all
settings
- under the WDS tab, clear out all settings
- under the Network tab, make sure the box is checked
to "Distribute IP addresses" and "Share a single IP
address using DHCP and NAT".
- update settings to the Base Station if you changed
anything.
2. do a hard reset of your second base station per:
http://docs.info.apple.com/article.html?artnum=107451
3. for now, put both base stations and the Mac in the
same room. Run the Airport Setup Assistant, and use
its guidance to configure the second base station as
a new base station that "extends" the wireless
network of your main base station.
That should do it.
Thanks very much. The printer works great from both computers via my second airport base station. And I can see both my base stations in the Airport Admin Utility.

Airport Admin Utility, iTunes, Airfoil can't see AE base station

I know this is not a new topic, but I can't find an answer in any of the other threads. With other users the problem seemed to "magically" go away. I have not been so lucky yet.
Airport Admin Utility can't see my AE base station but I can find it using "other" and typing in the IP address. I was able to update the firmware to 6.3 (again using "other" and typing in the IP address since the fw updater couldn't see it either). I can see it (with it's name displayed) with my router software. However, it does not show up in iTunes or Airfoil either.
The base station is connected via ethernet to my home network. I tried rebooting the computer, restarting the base station, I also tried a hard reset on the base. I do not have "distribute ip address" checked. I do have "enable Airtunes" checked. The firmware on my Linksys router is up-to-date and not a hack. I'm running OS X v10.4.5 on a Dual 1.42 GHz PowerMac G4.
Thanks in advance.
Dual 1.42 GHz PPC G4, 1.42GHz Mac Mini Mac OS X (10.4.5)

okay, I connected the AE base directly to the PowerMac with the ethernet cable and it showed up in everything (Airport Admin Utility and iTunes). So I guess my problem is with the router. What do I do now? This router is only a couple of months old.
When you suggested I disable DHCP, did you mean in the AE settings or on my router? As I mentioned initially, I do not have "distribute ip addresses" set up on the AE base. After reconnecting the AE base to the router, I tried disabling DHCP on the router and that didn't fix the problem.

Can't change channels on Airport Admin Utility

When I go into the Airport Admin Utility and go to configure my Airport Express Base Station which I play my iTunes through my home stereo, it initially will show the channel setting for about a half a second and then it shifts to a different screen that shows:
Base Station
Name:
Contact:
Location:
(Change password...) (Base Station Options...)
AirPort Network
Wireless Mode:
Wireless Network:
Wireless Security: 128 bit WIP
(Security Options...)
(Wireless Options...)
I can't figure out how to get back to that screen that initially flashed up to change the channel settings.
I'm having dropping issues playing music through my home stereo and a number of posts recommend changing the channel or the multicast rate and I can't get back to this screen!
Can someone help me figure out how to get back to this setting screen?
iMac Mac OS X (10.4.8)
iMac Mac OS X (10.4.8)

Change the value in the "Wireless Mode" window to "Create a Wireless Network (Home Router)" to get the channel option back. If this doesn't work, you may need to do a "factory default" reset to get it back to it's "out-of-the-box" condition where this would be the default mode.

Airport admin utility

When I open airport admin utility, the window 'select base station' opens but I can''t see my base station or anything at all, it's just empty, like no one lives there.
I have 2 emac's, 1-G5 dual 2, 1 G4, 1- PS3 and a HP Photosmart 7140 all on a WEP network (13 digit password for the PS3).
It all works perfectly except my printer does not work on the wireless anymore. Thats why I'm trying to see whats in the 'airport admin utility'.
What gives? Thanks to anyone.
Mac OS X (10.4.8)
1-imac core duo 2.1, 1- G5 dual 2.0, 2 emacs, 1-G4/ 400 Mac OS X (10.4.8)

I am experiencing the exact same problem with the exact same AE base station. At one point today, even though my internet connection stayed up, this problem began. I first notice that iTunes had dropped my wirelss network airtunes speakers, then I proceeded to trouble shoot, and discovered I could not load the base station configuration settings in the Admin Utility, nor could the Utility find the Base Station via scan. Entering IP address returned an error message communicating with the base station. This communication error came up when I tried to update the firmware, with (-8) indicated.
Plugging the ethernet cable directly from my PowerBook to the base station returned an error reading the configuration. It appears that the base station has lost the ability to maintain an IP address, or possbly database corruption.
Any experience with this or ideas, anyone? I'm not beyond buying the new one to solve this problem, the base station in question is around 3 years old.

Airport Express not Appearing in iTunes/Airport Admin Utility

After upgrading to iTunes 7, Airtunes did not work, so I followed the tips on the forum discussions, on MacOSXHints.com (resetting the IPv6 preference) and so on.
However, now iTunes will not recognise the base station at all. I think this is connected to the fact that the base station will also not appear on the Airport Admin Utility list. BUT... I am able to access the Airport Express by entering its IP address and password via the "Other" button. This has allowed me to check the AEx configuration settings, reset the hardware, re-upload the firmware, and even re-configure the AEx from scratch.
I am able to use the Internet through the AEx, and the network appears in my airport menu bar list, so I can select it and other wireless networks in range... It seems that iTunes and Airport Admin Utility just cannot see it. I have tried every combination of 'soft reset', 'hard reset' of the Aex, trashing of various airport admin utility and itunes preferences, and restarting software and the whole computer but this problem still persists.
Any ideas?? iTunes 7 is great, but I want my Airtunes back!!
Thanks in advance - Danny
iMac G5 20-inch Mac OS X (10.4.7)

you may be suffering from wireless interference.
download iStumbler and note the channels other networks in the vicinity are broadcasting on, then change the channel your network is using as far away as possible from those.

Non LAN IP address showing up in LAN in Airport Admin Utility

Any help would be greatly appreciated! I have two Airport Expresses, with the second one (for AirTunes only) joined to the existing network of the first one. The strange thing is, the IP address in the Airport Admin Utility for the second one shows up as an ISP IP (ie 134.362.74.141) while the first (base) one shows as 10.0.01. To top it off, I've already factory reset the second one twice now, but I still get the same ISP IP addresses and I can't get its configuration profile to open via the Airport Admin Utility.

If you hold in the reset button while plugging the Express unit into a convenient electrical receptacle, the old profiles will also be eliminated while the factory reset is done.

Airport Express flashing amber, but shows normal in airport admin utility

I just replaced a Microsoft wireless router with an Airport Extreme base station. I've had 2 airport express stations on the old wireless network working fine with solid green lights - 1 streams airtunes and the other is a print server. I installed the extreme base station and now the 2 airport express stations appear as normal / working in the airport admin utility but have flashing amber lights. the print server actually works - I can print. The airtunes streams, but it cuts out every 5-10 seconds. Can't figure out how to get rid of the flashing amber and can't find the error since the airport admin shows them as green and working normal.
Any ideas??

Hi ...... I am having the same problem but am having difficulties finding out why.
How did you solve it ?
Many thanks in advance

Airport Express Base Station doesn't appear in AirPort Admin Utility list

Hi,
After applying the "Security Update 2007-003" I had the following problem and can't solve it:
Now I can't find anymore my Airport Express base station under the list of Base stations in Airport Admin Utility and am also having problems while printing wireless, if the printer goes to sleep mode he doesn't wake up automatically anymore to do the job, every time I have to close it and open it again.
I can't find a solution for this problem, please HELP!
Thanks,
Macuser

"it was downloaded by the software update"
No problem then. Apparently there WAS such an update, but I missed it and it's been deleted from the list of available downloads, as you can clearly see.
There is now a new "Security Update 2007-004" for Tiger, and I think it's safe to assume that this will help correct your problems.
If your problems still exist afterwards, you will want to reset the AirPort Express unit to factory settings and erase all current configuration profiles. Do that by holding in the reset button with a straightened paper clip while plugging the unit into a convenient electrical receptacle. Open the utility "AirPort Setup Assistant" and choose to "Set up a new AirPort Base Station" and proceed. After successful completion, unplug and relocate the AirPort Express to its usual location.

Airtunes missing; no Music tab in Airport Admin Utility - Help!

Similar Messages

Maybe you are looking for