Airtunes multiple speaker output after iTunes7 upgrade

Prior to upgrading to iTunes 7 I was able to successfully play music from my PC and select multiple speaker. I could listen to the music at the PC itself and at the remote location I specified. After the upgrade this no longer works. I can only choose 1 location to play the music. If I choose both locations the music play for about 5 second and then stops. The progress bar in iTunes continues to move as if the song is playing but no audio is heard at either location.
I'm running Windows XP Pro, iTunes 7, Airport Express firmware 6.3.
Anyone else having similar issues. I've read about the IPv6 issue with MAC's but that doesn't apply to Windows users.
Windows XP Pro

I solved my own problem. After uninstalling iTunes 7 I still had the same issue. I then reinstalled 7, upgraded DirectX and my audio drivers. All issues fixed... Hooray....

Similar Messages

AirTunes (Multiple Speaker Mode)

AirTunes (Multiple Speaker Mode) does not show up.
AE firmware has been updated to 6.3
using Itunes 7.02
Mac osx 10.4.8
I just updated everything to what you see above, I have gone into system preferences, my firewall is off, and udp traffic blocking is unchecked.
I cannot see Multiple speaker mode, but it does list my computer and an external set of speakers, which I can connect to individually but cannot connect to both at the same time.
Any help would be appreciated.
mini mac Mac OS X (10.4.8) Itunes 7.02, firmware update 6.3 for AE

While running iTunes, the small button in the bottom right corner where you choose your output. Click on this and there is an option to connect to multiple speakers. I just updated all the same things as yourselves yestarday and that is how i found it to work.
Pinkster

Speaker issue after Mavericks Upgrade

I recently upgraded to Mavericks on my Mac Pro (mid 2010 ver.)
Now when I try to listen to Pandora, iTunes, or anything that pushes sound thru the O/S, the sound "jumps" between my Bose 5 companion computer speakers (USB) and the internal Mac Pro speakers.
Additionally, when I go to Preferences-----Sound, you can literally see the O/S jumping back and forth to these two rows "Built In Internal Speakers" and "Bose USB Audio USB". More specifically, you will hear the music thru the Bose speakers and then about every 20 seconds (sometimes it goes for over a minutes) it will "beeeeeeep" and then jump to the Mac Pro internal speakers.
I tried deleting the two .plist files as previous mentioned in past threads with no luck. Before I upgraded to Mavericks I never had ANY sound/speaker issues what so ever.
Any suggestions? Thank you

Update Saturday Jan 4, 2014
Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

Multiple Kernel Panics after Mavericks Upgrade

I've been getting kernel panics (shut downs and restarts suddenly) weekly (haven't resolved this yet).
I upgraded my Macbook Pro mid 2010 15inch Snow leopard to OS X Mavericks
Ever since I upgraded to Mavericks OS X, I've been getting kernel panics every 5 minutes.
It's frustrating, stressful and affecting my studies!
Please help me.
I'm in the middle of my exam period so I can't go out and pay a visit to the Genius bar.
Can anyone help me or suggest what the underlying problem is?
I also want to know why I've been getting frequent kernel panics prior to upgrading to Mavericks as well.
Here's the panic log, if it helps!
Thanks!
Anonymous UUID:       2914BECF-664D-8795-38FF-B387F367E37D
Tue Nov 5 21:31:28 2013
panic(cpu 2 caller 0xffffff7f9f553fac): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80bc562000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 2), Frame : Return Address
0xffffff809985b140 : 0xffffff801d222f69
0xffffff809985b1c0 : 0xffffff7f9f553fac
0xffffff809985b290 : 0xffffff7f9dc1c53d
0xffffff809985b350 : 0xffffff7f9dce8d9e
0xffffff809985b390 : 0xffffff7f9dce8dfc
0xffffff809985b400 : 0xffffff7f9df6d5be
0xffffff809985b530 : 0xffffff7f9dd0cd41
0xffffff809985b550 : 0xffffff7f9dc2308d
0xffffff809985b600 : 0xffffff7f9dc20bae
0xffffff809985b800 : 0xffffff7f9dc21af6
0xffffff809985b8e0 : 0xffffff7f9eb89ba2
0xffffff809985b920 : 0xffffff7f9eb9955f
0xffffff809985b940 : 0xffffff7f9ebc751b
0xffffff809985b980 : 0xffffff7f9ebc757b
0xffffff809985b9c0 : 0xffffff7f9eb9eff5
0xffffff809985ba10 : 0xffffff7f9eb6ad3e
0xffffff809985baa0 : 0xffffff7f9eb66cc7
0xffffff809985bad0 : 0xffffff7f9eb64816
0xffffff809985bb00 : 0xffffff801d6cb873
0xffffff809985bb90 : 0xffffff801d6cd76f
0xffffff809985bbf0 : 0xffffff801d6cb28f
0xffffff809985bd40 : 0xffffff801d2b6008
0xffffff809985be50 : 0xffffff801d226bb1
0xffffff809985be80 : 0xffffff801d2139b5
0xffffff809985bef0 : 0xffffff801d21e003
0xffffff809985bf70 : 0xffffff801d2c921d
0xffffff809985bfb0 : 0xffffff801d2f3e26
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f9f546000->0xffffff7f9f558fff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f9f53e000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9db24000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f9d8ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f9db78000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f9f541000
         com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f9dbcb000->0xffffff7f9de3afff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f9d8ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f9dbbb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f9db78000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f9de45000->0xffffff7f9e0f1fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f9dbcb000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f9d8ba000
         com.apple.GeForceTesla(8.1.8)[67BAF872-A238-3787-AB74-22297A51FE8F]@0xffffff7f9 eb49000->0xffffff7f9ec13fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f9d8ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f9dbbb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f9db78000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f9dbcb000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x000000001d000000
Kernel text base: 0xffffff801d200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 401243875971
last loaded kext at 264412692555: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9f656000, size 65536)
last unloaded kext at 325306283484: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9f656000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.14.11
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.GeForceTesla          8.1.8
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.driver.AppleIntelHDGraphics          8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.8
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBCardReader          3.3.5
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.kext.triggers          1.0
com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.iokit.IOSurface          91
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.AppleSMC          3.1.6d1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode; http://support.apple.com/kb/HT1455
Safe Mode - About http://support.apple.com/kb/HT1564
Repair disk permissions:
Boot in recover mode (Boot - Command-R)
Run Disk Utility
Select your system drive (Macintosh HD).
Click on Repair Disk Permissions.
While you are there repair the disk as well:
Click on Repair Disk.
Restart.
If all else fails:
If Mavericks was installed on a system with an unhealthy filesystem it can crash often.
Backup your data and reinstall Mavericks.
From Kappy:
Re-download and reinstall Mavericks.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Mavericks: Select Reinstall Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How can multiple speaker outputs be created with varying volume levels and retain keyboard master volume control? Multi-output and aggregate both cannot adjust sub-devices and lose keyboard volume control capabilities on my Mac. What's the solution?

Is it my Mac? Is there software I need? An app perhaps? This seems way too complicated to set up spkrs. I'm attempting to use 2 hdmi and 1 headphone outputs w/ control and varying levels (ie hdmi's quieter than desk spkrs) thanks for suggestions! -Tim

Hi Tim,
Not sure since I'm deaf,but if possible I'd think...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Multiple Speaker Output Control using Java!

Hi,
I am trying to connect around 4 speakers in 4 different rooms of the house. I would to create a Java program to play music through only 1 of the four at any one time or even better play different music in different speakers. How would i go about connecting these speakers to a PC and how would i control using Java what gets played in which speakers. I know this might be a little outside the scope of this forum but i dont know where else to go...ANY help will be REALLY appreciated.
thanks guys!

Checked this ?
http://windows.microsoft.com/en-AU/windows/no-sound-help#no-sound=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

After adding Apple TV, my itunes multiple speaker icon (airplay?) blocks speaker output on my pc. Local speaker output will not highlight. Any ideas?

After installing Apple TV on another TV, my Itunes on my PC will not output to speakers. Apple TV added multiple speaker icon but it will not highlight "local computer". I can check box but volume bar won't open and no sound comes through although speaker mixer shows signal. Any ideas?

This same thing is happening to me on only my 2011 Macbook Pro. My other macs and iOS devices can all stream audio to my airplay devices (airport express and atv2) just fine.
On my Macbook Pro trying to play to 1 external speaker
Click the airplay button in iTunes (airplay logo lights blue)
Select ATV2 or Airport Express
Airplay logo goes back to gray
No audio is played out of airplay
On my Macbook Pro trying to play to multiple external speakers
Click the airplay button in iTunes
Select "Multiple speakers..."
Check the box next to ATV2 or Airport express
Check box "depresses" like I've clicked it, but the box is never checked
No audio is played out of airplay
Like I said, all of these things work perfectly on all of my other apple devices. It's just this one Macbook Pro that it's failing on. It seemed like it just started failing a month or so ago. It's driving me bonkers!

No output to HDMI (but ok to VGA...) after CPU upgrade

Hi there,
I have a very strange problem... hope you can help!
I wanted to upgrade my Mac Mini to use it as an HTPC, so I passed from 1.83Ghz CoreDuo/512Mb to 2.00Ghz Core2Duo/2Gb.
The CPU and RAM upgrade process went OK, so I tried to connect the Mini to my HDTV (TOSHIBA 37A3030D) via a DVI->HDMI cable, but the screen was blank.
I thought I had somehow damaged the digital video out of the Mini during the upgrade, so I tried to plug a 17" monitor with a VGA-VGA cable and a DVI-VGA adapter: no problem there.
Then I thought about a cable issue, but the very same cable works perfectly when I try it with my MacBook Pro, and in the same TV.
So I played a little with SwitchResX and finally resolved: after few tries and some reboots everything worked.
But then I noticed that CPU temperature was a little too high, so I decided to re-open my Mini and put a better thermal compound.
All went well, or so it seemed: in fact since this last intervention the CPU temperature went ok but I couldn't get HDMI output from my Mini any more!!
Output to VGA still works, tried with the monitor I mentioned before and with my TV's VGA input ... too bad I can't reach 1080i via VGA!.
I tried almost everything:
- Playing around with SwitchResX, with no luck this time...
- Resetting PRAM and NVRAM with various methods (the little button on the motherboard, CMD-OPT-P-RE during the boot, etc... )
- Resetting SMC
- Resetting firmware (keeping the power button pressed when turning on the machine 'till it beeps)
- Reinstalling Leopard
...no results.
The weird thing is that if I VNC to the mini I notice that the TV is correctly recognized (screenshot: http://www.matteo.ge.it/vnc_mini.jpg), and EDID data seems ok (link: http://www.matteo.ge.it/TOSHIBA-TV_macmini.txt)
Do you guys have any idea?
Thank you so much, I'm getting desperate

I tried to connect the mini to the TV just after the upgrade. After some tweaking with SwitchResX it worked. The problems began when i decided to re-open the mini to put some better termal compound over the CPU.
I agree with you, I have probably screwed up something during this operation, but I really can't say what!!! I tried both TechToolPro and the hardware tests from Tiger DVD, and all of the tests were ok...
I phoned to the Apple tech support here in italy, but they proposed me to change the entire logic board, which would cost me almost the price of a brand new machine!!
The ultimate test I want to do is to hook up my Mini to a DVI monitor with a DVI-D cable.
If it doesn't work, It is almost certain that I have damaged digital video out (even if I would like to know how I could did that!!)

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

Ipad2 crashes multiple times a day after ios7 upgrade.

Ipad2 crashes multiple times a day after ios7 upgrade. This does not seem to be an app specific problem and has happened with Safari, other browsers, games, books, etc. The screen freezes and then the app closes to the reveal the desktop. I use the ipad exclusively in landscape. I have purged memory several times and tried re installation. I never had a problem with the device prior to the upgrade. Any suggestions or solutions? Many thanks.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Multiple Problems after Leopard upgrade HELP! Video display and FW problem

I don't know if this is related.. but I've been battling multiple problems ever since I upgraded my G5 to Leopard a week ago. Everything was perfect under Tiger.
Well, I think I've got everything solved except two last things.
1. My 750GH Maxtor Firewire drive... when I plug it in... does not show in the desktop and it causes both my internal drive and two other Firewire enclosures to disappear from the desktop. I can see all of them mounted in the disk utility, but if this one drive is plugged in.. all icons disappear from the desktop. If I unplug or unmount the 750GB drive.. everything comes back.
I've reformatted this drive, etc. This does not happen on my MacBookPro. The drive mounts fine on that. I've tried different cables, I've tried USB (it's a triple interface Maxtor) and nothing seems to work. I would assume there's something wrong with the drive and not my desktop... but the drive works fine on the MacBookPro.
PLEASE!! Any clues would help...
The other problem that only occurred directly after upgrading to Leopard... is that my graphics now get corrupted and garbled. I've got two video cards running two LCD monitors. The card giving me problems is the ATI Radeon 9800 Pro (256MB). What happens is.. first all the window shadows and top menu bar start getting checkerboard patterns.. then the whole screen starts getting variants of different colors and checkerboard patterns. After awhile and refreshing the screen a few times... the problem goes away for a bit. Then comes back.
Again, this card and my entire system and drives were working fine under Tiger. Now, I don't know if I have a bad card? Is there something wrong with Leopard on my G5 2Ghz DP? Did my Maxtor 750GB triple interface drive just go bad with the upgrade?
I don't know where else to look, I'm guessing the "geniuses" at the Apple store won't help me since this machine is out of warranty. Any help would be HUGELY appreciated. I've been battling all these problems ever since I started the Leopard upgrade 4 days ago and have not got much sleep.

The drives not or disappearing on the desktop could point to the need to do a pram reset.
I believe you hold down the apple-option-p-r keys at startup and listen for a couple of chimes.

Multiple Cals after Lion Upgrade

Hi,
I recently upgraded to Lion and after the upgrade I notice on my Mac that iCal displays many duplicate entries (all my Mac's look the same)
There is actually about 300 cals in this list.... If I check on my iPhone, iPad or MobileMe (portal) there is only one copy so it appears to be an iCal issue
I have tried deleting using an Automator Workflow (which suceeds but they keep coming back)
Anyone else seeing this or know a fix ???
TIA
Rich

Rich,
I tried that but the checkbox keeps getting reset
Perhaps my reply was not clearly stated.
Have you deselected "Birthdays" on your iPad, iPhone, and MobileMe?
iPhone/iPad Calendar>Calendars>Other>Birthdays (deselect)
MobileMe Web App>Calendar>Preferences...>Show Birthdays calendar (deselect)
If you have done that and the problem continues, quit iCal, go to Finder>(Option+Click)Go>Library>Calendars, and remove any/all files with "Cache" in the file name.

Xperia M2 dual external speaker output got low after using one month, what should i do??

I experienced that my cellphone's external speaker output got low..

My phone here xperia m2, my brother have xperia SP that is older than mine. But when I compared the sound output my phone and his, the result was disappointing. My phone have the exact output as his when it was new. Somehow now my sound output is smaller than his. How can I fix this? Or can it be fixed? Please I need help

I got speaker problem on iPad 2 once after I upgraded to iOS 7.3. Any idea? Please help

I got speaker problem once I upgraded my iPad into iOS 7.0.3. Any idea? Please help.

Go into the settings and reset all settings. See if that helps.

Airtunes multiple speaker output after iTunes7 upgrade

Similar Messages

Maybe you are looking for