AirTunes not working over wireless from Windows 7

Setup:
Dell Inspiron 15 laptop (Windows 7 Home Premium)
Airport Express
Network:
ADSL router
+- Desktop PC (ethernet to router)
+- Airport Express (ethernet to router)
+- Dell laptop (wireless to Airport Express)
The Airport Express creates a wireless network (802.11n, 2.4GHz). The Dell laptop can't see the speakers. My Macbook Pro works fine. I've determined that the problem is that IPv6 isn't working over wireless. The Dell laptop can't see the Airport Express with the Airport Utility either.
When I plug the Dell laptop into the ethernet on the ADSL router, everything starts working fine. If you look at the interface information DHCPv6 is up.
Without the cable plugged in my wireless connection says:
IPv6 Connectivity: No network access
When a cable is plugged in:
IPv6 Connectivity: No internet access
(which is how it should be).
I am pulling my hair out here and have absolutely no idea why this won't work.
Firewall is completely disabled. The router also creates an 802.11g network but it's settings shouldn't matter (wireless isolation, which is turned off, and so on).
Any suggestions?

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Airplay not working over wireless, works over ethernet?

I posted this in multiple forums in which it applies to.
Just looking for troubleshooting suggestions from my wireless N MBPro, to my wired ATV2. Here is the rundown (all devices running latest updates):
1)used to work just fine with old router
2)airplay works in all directions, from wireless devises to the wired ATV2
3)updated to a much newer N router from cisco
4)now, airplay works over Ethernet from itunes to ATV2 (and iphone4s to ATV2), ATV2 plays music from my MBPro just fine
5) however airplay fails to work from itunes to ATV2 over wirelesss
6)all wireless connections are sound, it is not a bandwidth problem, it literally says "connecting to apple tv" and never stops or connects
7)itunes sees the ATV2 just fine over both Ethernet and wireless connections, i can select ATV2 as an output even when on wireless
8)it will even ask for the password once i select it
So, any suggestions? I just dont know where I am going wrong, somehow the wireless aspect is the broken link. As a side note, all wireless clients and wired clients are on the same subnet.
Thanks for any suggestions or help!

I had the same problem. Disable any IGMP, or IGMP proxy features on your router. As soon as I disabled IGMP proxy on my router everything came up has been working for a while. Lack of driver support on the wireless clients is likely the cause. oh well, at least its working now.

[T400] Cisco VPN client not working over wireless adapter (but works on cabled connection)

I have a very strange problem.
I need to connect to my work via the cisco vpn client (version 5.0.00.0340).
My previous laptop (T43 , windows XP) worked well through both wired / wireless connections. My desktop machine (vista) works via wired connection (it has no wireless connection).
On my new T400, the VPN client works via a wired connection but not via the wireless adapter.
On the wireless apapter, the vpn seems to connect OK, but when I try to access resources via the VPN there is little response.
I get this in the vpn log...
405 08:56:57.073 04/16/09 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xa4510009 (IPSecDrvCB:846)
I've tried disabling the firewall (in both the T400 and the router), removed access connections, and disabling tcp v6. I've rebooted everything too.
But, nothing seems to work. I suspect the problem is on the t400 somewhere, because the old laptop used to work OK via wireless.
I've seen some google links on cisco vpn not working via wireless but nothing seems to apply to my exact situation yet.
Anyone else had this problem or know of a fix? Thanks in advance.
Solved!
Go to Solution.

all good now, got it working.
The Deterministic network thing was not installed on the wireless adapter for some reason.
So, I installed the latest wireless driver, reinstalled the vpn and all is good now.

Itunes Sharing not working over wireless

I have three PC's both running the latest version of ITunes.
Desktop 1 is running Windows XP and connects directly into the Action Tec Router via a wired connection.
Laptop 1 is running Windows 7 and connects to the Action Tec router via a wireless connection.
Laptop 2 is running Windows Vista and connects to the Action Tec router via a wireless connection.
All PC's can connect on the Internet. The wireless connection uses WPA/PSK. Any firewalls are disabled.
Desktop 1 can see the Library of both Laptop 1 and Laptop 2. From Desktop 1, When I click the library of laptop 1 Itunes says "laptop1 library is not responding".
Laptop 1 and Laptop 2 do not see the library of either Desktop 1 or the other Laptop.
If I move Laptop 1 from a wireless connection to a wired connection, the sharing works fine.
Anyone know why the wireless is causing Itunes sharing to not work?
Thanks, Jim
Solved!
Go to Solution.

So this morning I was playing the Windows 7 laptop and decided to delete my windows wireless profile on the laptop called home and my existing home SSID on the Verizon router. I created a new SSID called boo with no security. I connected to that SSID and Itunes sharing worked between the desktop and laptop. I then added WPA2/PSK to the boo SSID and sharing still worked. Finally I went back to my original SSID called home and WPA2/PSK, recreated the home profile and Itunes sharing worked again.
I then went to the Windows Vista Laptop and without making any changes to it, Itunes sharing worked.
So in the end it seems deleting the current SSID configuration and rebuilding it on the verizon router cured the problem (for now).
Jim

AMD redeon HD 7400 graphic not working after upgrading from windows 7 to windows 8 Pro

Hello,
I have hp Pavilion G6 1117tx model. i have upgrade from windows 7 to windows 8 Pro. after upgrading i have observed that on righ click option i have not fine CCC and Configure switachable graphic option is missing. so please help me how i can solve proble relationg to AMD redeon hd 7400 grphic card and intel hd 3000 series grphic switchable option.
Please help........
Mounal Patel
This question was solved.
View Solution.

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Blutooth is not working after upgrading from Windows 8.1 to Windows 10

HI I am using HP 2000 Notebook PC with serial number 5CG3245C1C and product number D9H41PA#ACJ. Recently i updated from Windows 8.1 to Windows 10. Evertything is working fine with nice speed but only issue with bluetooth , i cant see bluetooth in my system. so can any one please help me with the issue.

On Sun, 1 Feb 2015 10:34:40 +0000, Field Commander A9 wrote:
In-place upgrading from Windows 8.1 to Windows 10 will cause all desktop internet browsers to be unable to open any non-local web pages. You'll have to use netsh to reset the winsock stack to fix this.
Not necessarily. I've upgraded several systems here, ranging from tablets
to laptops to virtual machines with a combination of IE, Chrome, and
FireFox and I've not experienced this on a single system. Also, your post
is the first time I've seen this issue reported in the forums.
Paul Adare - FIM CM MVP
The problem with the gene pool is that there is no lifeguard. -- BSD
fortune
Nah, the problem is that it doesn't have enough chlorine. -- Lionel in ASR
It also lacks an undertow for the weak ones. -- Joe Creighton in ASR

Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Migration Assistant not completing over wireless from PC

I have a new Macbook Air and am trying to complete the Migration Assistant from a Dell XPS PC (laptop). The process will begin just fine, but says it will take 9, then10, even up to 11 hrs., etc. then doesn't wind up working even after those time frames have passed.
I have a very fast internet connection, so I am not sure why this would be happening. Is there a way to use an ethernet cable instead of wifi? I tried connecting the two computers with an ethernet on a whim but my Mac didn't reconginze the PC, and vicea versa.
I'd like to avoid manually bringing over my PC files if at all possible.... Any suggestions will be much appreciated!!

Did you read through this knowledge base article on migration assistant for PC to Mac transfer? You can use a wired network in addition to wireless.

Powershell unzip with shell.application not working when launched from windows service

I have a deployment agent on a machine implemented as a windows service. Service is 32-bit and runs on windows server 2008R2 x64 SP1 with powershell V2. Powershell script requires elevation and to run under x64 because of dependency to powershell module
'IIS Administration'. To achieve this, the service starts a cmd file which in turn launches powershell x64 console:
C:\WINDOWS\sysnative\WindowsPowerShell\v1.0\powershell.exe "Start-Process C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell -ArgumentList '-ExecutionPolicy Bypass -NoLogo -NonInteractive -NoProfile -File C:\Temp\EndJobCmd\Install.ps1' -Verb RunAs"
This seems to work well. The problem I have is that the script has a sequence where it unpacks a zip file to a destination folder using shell.application, this works fine when triggered manually on the server or through the task scheduler, but when triggered
from the service it does not extract any files at all (cannot see any errors thrown by the script but it seems to continue to execute as it logs a successful message to the event log after finishing).
Unzip sequence looks like:
$shell = New-Object -com shell.application
$pkg = $shell.namespace($sourceFile)
$installDir = $shell.namespace($targetDir)
$installDir.Copyhere($pkg.items(), 20)
Any advice greatly appreciated. I have searched some and seen a few people with similar issue but have yet to find a solution.

If it's still actual, I managed to fix this with having CopyHere params equal 1564.
So in my case extract zip function looks like:
function Expand-ZIPFile{
param(
$file, $destination
$shell = new-object -com shell.application
$zip = $shell.NameSpace($file)
foreach($item in $zip.items())
$shell.Namespace($destination).copyhere($item,1564)
"$($item.path) extracted"
1564 description can be found here - http://msdn.microsoft.com/en-us/library/windows/desktop/bb787866(v=vs.85).aspx:
(4) Do not display a progress dialog box.
(8) Give the file being operated on a new name in a move, copy, or rename operation if a file with the target name already exists.
(16) Respond with "Yes to All" for any dialog box that is displayed.
(512) Do not confirm the creation of a new directory if the operation requires one to be created.
(1024) Do not display a user interface if an error occurs.

Printers not working after upgrading from windows 8 to windows 8.1 pro 64 bit

did the upgrade from win 8 to win 8.1 pro 64bit.
Printers were working fine but now are not recongnised and the spooler is not starting.
I reset the spooler on numerous occasions to no avail and ive downloade the latest drivers for the printer but no luck.
Please assist asap.
I have a canon lbp 2900 and a hp officejet 6500

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

WLC 2504 Airplay not working over wireless

Currently we are trying to use Airplay within our network and we're having really wierd issues.
First, we have 2 subnets: 192.168.x.x and 10.x.x.x
We have our wired Apple TV's on 192.168.x.x. and our wireless Apple TV's on 10.x.x.x
We also have wired computers on both networks. But all of our wireless clients are on 10.x.x.x.
So:
-Wired computers (in both subnets) can get to the wired Apple TV's.
-Wireless computer cannot get to any Apple TV's.
-Nothing can get to the wireless Apple TV's.
What I've done from other forums:
-I've enabled Global Multicast and set a multicast adddress
-I've tried it with and without IGMP snooping
-Enabled multicast routing on the switches that the Access Points are connected to
-Using Bonjour Browser, I don't see any AirTunes devices when I'm connected Wirelessly
Any help would be greatly appreciated

I've done that, but nothing has changed. But looking at the profiles:
Profile Name                                   default-mdns-profile
Profile Id                                         1
Service Count                                  7
No. of Interfaces Attached                0
No. of Interface Groups Attached      0
No. of Wlans Attached                     1
I can't find where I can set in the WLAN where the profile is applied. We only have 1 interface connected to the controller (interface 1 which is the management interface). I'm assuming that it only needs to be applied to the WLAN, but I'm wondering if this is set to the right WLAN. Where can I find this?

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

Home Sharing not working between wireless PC's / devices and ethernet wired PC's on the same router.

Home Sharing is not working between wireless PC's / devices and ethernet wired PC's on the same router. I installed a new Verizon FIOS ActionTec MI424WR GigE wireless / ethernet router, replacing the original FIOS router. With the old router Home Sharing worked fine across and among all iOS and Windows wired and wireless devices. With the new router Home Sharing works between and among the Wired PC's but not between the wired PC's and the Wireless connected PC's or iOS devices. Home Sharing also works between and among the wireless connected PC's and iOS decices but not between them and the wired PC's.
Only the router was changed. No changes were made to any of the devices except all were updated with the latest version of iTunes 10.7.0.21 and the iSO devices were updated to iOS vrsion 6.01. Three PC's are wired and all are running Windows 7. There also is a Windows Home Server connected to the router by ethernet port. It does not run iTunes but does provide WebDAV services to my iOS devices. This works fine. Two PC's are wireless, one running Windows 7 and one running Windows 8. All of the PC's are connected to the same (new) router via it's ethernet ports and it's wireless access point. Two of the wired PC's are connected via a high-speed ethernet hup that is connected to the router (Home Sharing works fine between the two PC's on the hub and the PC on the router). All wired and wireless devices on the router are visible and members of the router's Home/Office virtual network.
All of the PC's are visible in the Windows network and all shared files are accessable from all PC's, both wired and wireless.
Obviously the router seems to be the issue, something between the ethernet and the wireless access point components. I checked the settings and found nothing that would prevent Home Sharing between the wired and wireless devices. There is no setting that isolates the wireless network. I have done the following:
Read the router user manual and checked all the settings
Rebooted the router and tested.
Turned off the router's firewall and tested.
Home Sharing is turned on all the devices and all use the same Apple ID.
Restarted iTunes and tested.
Verified iTunes is "Allowed" in each PC's firewall.
Again, I can Home Share between the two wireless PC's but not between either of the wireless PC's and any of the wired PC's. I can Home Share between my iPads and iPhones and either of the two wireless PC's but not with any of the wired PC's. I can Home Share between any of the wired PC's but not between any wired PC and a wireless PC or iOS device.
I hope someone may have had a similar problem and has a fix suggestion. I'm stumped! I have a;so contacked ActionTec and awaiting an answer.

Solution from ActionTec is:
Log into your router.
Click the Advanced icon
Cclick Yes
Click on the IGMP Proxy
Select Disable
Click Apply

Facebook App not working over 3G, but works over Wi-Fi.

I have a BlackBerry® Curve™ 3G 9330 Social Messaging Ready smartphone. My current software version is 6.0 Bundle 2333. My Facebook application worked perfectly fine when I got the phone a few months ago over the Verizon 3G network and Wi-Fi, but when I recently updated Facebook to version 2.0.0.58, it does not work over 3G anymore. But everytime I try to connect via 3G it says "We cannot reach the Facebook server at this time. Please try again later. (100)" It does however still work over Wi-Fi.
I have tried various attempts to fix it: uninstalling the App and re-installing it and also removing the battery and putting it back in (hard reset), but nothing has worked.
Is anyone else have this same issue? Is there a way to restore my Blackberry to its factory settings so that I can just use the older version of the Facebook App [that was previously installed]?
Thank you.

Hey metalhourse90,
I can see from your PIN that you currently don't have browsing services included in your data plan. I would advise contacting your wireless provider to have this enabled.
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

AirTunes not working over wireless from Windows 7

Similar Messages

Maybe you are looking for