AirTunes, remote app, and Windows 7

Does anyone know if the airport audio output works with windows 7? It is working with old xp machines but it won't show up in iTunes on my windows 7 computer. I had to turn off windows firewall to get the remot app to work but now I can't send audio to the airport anyway. Please help! And telling me to buy a Mac won't help. I wish I could afford one. Believe me. Thanks.

Try here:
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV

Similar Messages

The Remote App and Windows 8.1

Since... ( I believe) I updated my windows to 8.1 my app remote on my iphone, touch and ipad has not be able to control
or even sometimes find my itunes library.. it will show up for a bit then totally stop working.. both my apple Tvs are good but
my remote app just cant find and or stay connected to my library .. ????? any one have the same issues or help??

hey apple.... you are seriously a bunch of *********!!!!!!!!!!!!!!!!! i made the mistake of spending over 8000 on your products and now.. i have one major problem where half your devices.... apple tvs and my remote wont work... but no one nor you can fix it.....

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Remote App and Desktop Login Does NOT work

Hello there,
I have an easy one for you all. I am running Windows Server 2012 R2 Datacenter off a server at a university. This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data. As
of now, I only have been able to do RDP from home with it. Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether. Let
me break down my questions:
1. Though the security certificate is installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers. How do I get the others to trust it?
2. Number 1 except this occurs in the Remote Desktop and App window as well.
3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add right? I guess I cannot play with 'User Accounts' in control panel anymore.
Any help would be appreciated. Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears. I just want to keep things as simple as possible.
Regards,
Ben

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Apple Remote App and iTunes

Hi
I've got the latest software on iTunes and my Remote App for iPhone and iPad. I've noticed from tint to time that when selecting the source in the Remote App (I.e. whether to play music / films etc from iTunes or my AppleTV I notice the icon for iTunes DJ appears (icon is several CDs stacked on each other). This only appears very occasionally and I have no idea what triggers its appearance. I would have though it should appear there all the time.
Anybody have any clues as to what is happening and why?
Thanks

Hi,
I have had and fixed a similar issue;
Setup;
Linksys ADSL router/model (4 port wired and wireless)
LAN Network = 192.168.0.x
Mac Mini wired into the router (on same LAN)
Airport Express wireless (driving my stereo speakers and acting as a wireless client on the same LAN)
Apple iPhone 3GS wireless with Apple Remore app
iTunes 9.blah (last 9.x version before 10 havent upg yet, iTunes all configured to use airtunes, remote speakers and remote app etc)
Now It will all work fine and dandy at first then if i stop itunes (and the remote app disconnects) after a while (5 to 10 mins) the mac goes to sleep to save power.
The mac doesnt wake up again to accept the connection from the remote app.
So I found an apple support article (cant find it now) that suggested that I set the "wake on lan" feature, this wakes the mac and itunes if the mac has slept. Its in the system preferences / energy saver (its something like "wake on lan" or "wake on network")
This fixes it for me.
Cheers

Unable to see Remote App and Desktop Connection in Group Policy Management Editor

I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?

> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Remote App and iTunes not syncing

I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

Ipod remote app and apple tv sync vs. stream problem

Have been using ATV 1st gen streaming from a shared itunes library for some time.
Now I want to use the ipod remote app and can make it work only if I sync content to the ATV. If I stream content to the ATV, the remote app says there is no content.
However, I can see (on my tv) and play the sync'd content using the white plastic remote.
*Does this mean the remote app works only with synced (not streamed) content on ATV 1st gen?*
(all itunes and ATV software is the latest)
Thank you.

Connect your Remote App to your PC/Mac
Select Song
Select Play
Tap Full Screen icon(Album ARtwork)
Select "AirPlay" button
Selcect your ATV as the only Speaker
This way you can stream content to your ATV
This works with ATV II Aswell
I have both and could not stream FROM ATVII to my MAC/ATV I
But using MAC/PC as source and ATV as speaker makes it work fine with unsynced content

Iphone remote app and itunes

All seemed to be going well until - the updates.
Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
<edited by host>

Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

IOS Remote App and ATV2

I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
"Remote can't connect to your iTunes library. Check your network settings and try again.
I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
I Apple TV can access my iTunes libraries fine as well.

Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme. The wifi network works fine and all is well. The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again" I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas? Thanks MacBook Air, iOS 5.1.1

How to distribute my windows phone 8 app and windows store app without publishing in the store

How to distribute my windows phone 8 app and windows store app without publishing in the store
any business license or enterprise license needed..
I am a windows developer talking behalf of my company i.e wipro
I have a question about the enterprise license and we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
How to release the app?
what are licenses etc needed?

Hi,
for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program.
An unlimited number of devices can be enabled for sideloading using this key.
thanks
diramoh

Looking for 3rd Party to overview Time Usage on Apps and Windows in 10.6

Hey there,
I'd like to get an overview about the time I'm working on my Mac, like which Apps and Windows I use the most. Thinking of an App that can show a week, month, year History.
any tips welcome.
Jazz

Look for them at CNet Downloads or MacUpdate.

Remote app and an ethernet network

I'll try to keep this simple.
Everything was working fine with 10.5.8, no longer with Snow Leopard.
I have an ethernet network connected to DSL.
Apple TV is hooked up via ethernet.
MacPro is hooked up via ethernet.
Airport Express is hooked up to ethernet and has a wireless WEP network for airtunes, etc.
Before the Snow Leopard I could:
1. Connect to my AppleTV with the Remote App with my iphone when connected to the Airport.
2. Connect to the iTunes Library on my MacPro with my iphone with the Remote App.
Now, unless I unplug the ethernet cable on the AppleTV I cannot connect with the Remote App. Also, cannot connect to the iTunes Library at all (the MacPro doesn't have Airport, but it never had.
Any ideas? Thanks!

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

AirTunes, remote app, and Windows 7

Similar Messages

Maybe you are looking for