AirTunes stopped working with iTunes 7

Let me preface this post by saying I didn't really know how to categorize this post (MacBook Pro problem? iTunes problem?)
So I was as excited as the next nerd about today's Apple announcements and of course I performed a System Update on both my Macs as soon as i got home from work so I could check out some of the new features in iTunes 7.
All things being equal (my network settings on my machines have not changed), AirTunes no longer works on my MacBook Pro. My 12" PowerBook still works just fine (man, that little machine is bulletproof....), but the MacBook Pro refuses to connect.
I've tried rebooting the MacBook Pro. I've tried restarting the AirPort Express. I've double and triple checked all network settings... what gives?
iTunes on the MacBook Pro detects the presence of my AirPort Express... it just won't allow me to select it as an audio output...
Any ideas? I realize that iTunes 7 has only been in the wild for a couple of hours now, so perhaps not a lot of folks out there are familiar with it yet.

IP6 did the trick. Who knew
Weird, huh? I think I found that in the iTunes for Mac discussion.
I don't know much about IPv6, but since the only computer I connect up to the work network already had IPv6 enabled, I'll just leave it enable on the network at home, too. I vaguely remember turning it off a long, long time ago for some reason (I think maybe troubleshooting what ended up being a cable company problem) and I apparently never had a reason to turn it back on...
charlie

Similar Messages

  • HT4557 my iphone stopped working with itunes  it wants me to enter a passcode in itunes but Itunes is not asking for one

    Remote is no longer working with itunes on one computer since updating to IOS 6

    i found the one that worked best for me was step 5 because right after the most recent itunes update, my 5s only came up on my pc. the instructions for step 5 are a bit tedious but it works great. http://support.apple.com/kb/TS1538

  • IPod Touch stopped working with iTunes with OS upgrade

    I have a problem with my iPod Touch connecting to iTunes. It is a new
    It has worked fine in the past, but stopped working once I upgraded from OS 10.4.x to OS 10.5.. I can still see/ sync my old 3rd generation iPod just fine.
    I am currently using iTunes 8.0.1. The iPod is charging fine with the cord provided. The iPod works fine, but I would like to load the Apps I purchased and update the podcasts I listen to.
    Any suggestions will be appreciated.

    I apologize for posting a bit early.  Found an Alpine manual online and i needed to set the AUX port to off.  They also recommended a reset of the Touch.  After doing these two things it is now working.  Maybe this will help someone else.

  • Why has EZ Vinyl/Tape converter stopped working with Itunes?  I have used for several years, but now recent 11.0.4 Itunes has a problem with "Script conflict", and EZ has a brain-****.  Conversion goes into Itunes Playlist-not song/artist/album listing li

    What has stopped Itunes from working with EZ Vinyl/tape converter????  I get a "Scripts conflict" error, and Itunes bugs out.
    I had two Geek squad people in to look at, and they can't get it to work like it had for three years.  Is 11.0.4 to BLAME!!!!

    I'd like to know who Marlene is....oh wait, it was a mixup.
    I suspect these posts will be deleted.
    It's every software company's answer to everything - upgrade to the latest version.
    And for good reason, the bugs they know about get fixed, while introducing new ones. Not on purpose, of course, it just happens.

  • TS1741 Remote and Home Sharing stopped working with iTunes 10.7

    I have been using Apple Remote to control my Win 7 library as I play it via HDMI through my A/V receiver. I used it on iPad 2, iPhone 4s and iPod Touch 3G, with no problems for several weeks. Just today, however, I cannot get the devices to appear on the iTunes device list, and cannot access the library remotely. I have tried all devices while connected to the same network [tried this with three different networks]. I have turned off firewalls and anti-virus. I have rebooted and reset routers many times. Reinstalled iTunes. Repaired Bonjour. Confirmed port forwarding in routers and in firewalls. Confirmed account names and passwords.
    Airplay works fine.
    I believe the problem is in an iTunes or Windows setting that might have changed during an automatic update, but I can't find it.  Any ideas? Similar experiences? I know a lot of ATV issues have come up with other users, but these don't seem similar to my issue.
    Thanks.

    Somehow, this seems to have been resolved. The only changes I made were:
    1)  I disabled the wireless adapter in my Media server, and enabled the wired LAN adapter. Both are on the same router [192.168.2.1] I have been using wireless for several weeks without any problem. Of all the changes I made today, this is most likely the one that resolved the problem, for now!
    2)  I disconnected my Windows Home Server from the Verizon router [192.168.1.1] and connected it to the Linksys router that I use for my Media server. All my devices connect through the Linksys router, and the WHS box was not involved in any way to this sharing function [it is usually asleep]. As stated previously, I have used the Remote functions for several weeks without any troubles. All shared devices must be on the same router, and they have been;
    3) I also turned on media sharing for the folder containing my master music files, but this is NOT the same folder containing my iTunes libraries or my iTunes media files. This is only an original folder with the largest versions of all my music files [many that iTunes is unable to read].
    I don't know why any of these actions should have recovered my ability to Remote with iTunes, but alas, it "seems" to be working for now.
    Summary... Try everything, even if it seems completely unrelated!!!

  • Home sharing/Airplay has stopped working with iTunes to Apple TV

    I have recently updated my Apple TV (3 days ago) and prior to that both Home sharing and Airplay worked fine between my Macbook and Apple TV. What do you suggest I do to fix the issue?

    Hello Burl3y,
    Thanks for using Apple Support Communities.
    It sounds like you're having issues with both Home Sharing and AirPlay between your MacBook Pro and AppleTV.  For troubleshooting the issue with Home Sharing, take a look at the following article:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    For the issue concerning AirPlay from iTunes take a look at this article:
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Take care,
    Alex H.

  • I can't subscribe to Match on Win 7 with iTunes 10.6.3.25. When Apple ID auth window comes up iTunes crashes with "iTunes stopped working" and iTunes closes.

    On Windows 7 with iTunes 10.6.3.25 I cannot subscribe to iTunes Match. In iTunes I click on iTunes Match in the left pane then click the "Subscribe for $25 a year" button. A window that looks like I am going to be asked to login using my Apple ID and password starts to come up but then an error occurs and I get a window that says "iTunes stopped working" then iTunes closes. What can I do ?

    I've also read somewhere about using Win Rar to extract files to do with apple mobile device support from the itunes installer file, would you recommend that to? I don't really fancy the idea of doing anything that involves my registry because knowing me I'll end up screwing my laptop up for good lol
    It's a little more involved than just doing a standalone AppleMobileDeviceSupport64.msi install, I'm afraid. The relevant drivers in AMDS are not digitally signed for 64-bit XP, so you have to force XP to accept a driver install that it would try its damnedest to not do. There's no driver issues for other 64-bit componentry in the installer package (I think the GEAR drivers install on XP 64-bit systems), but I believe there's still a bit of fancy footwork involved in getting them installed too ... although it's been a long time since I've looked at an instruction set, and I might not be recalling those things correctly. (So if you're not comfortable with system modifications, it might be best to steer clear of the Orca-based techniques ...)

  • Itunes stops working with vista

    Has anyone had problems with itunes stopping working with windows vista? I have tried all the upgrades but itunes still stops working when playing songs and videos.

    Tizzy79,
    Your computer is blue screening. This is frequently caused by problems with driver conflicts or a computer virus. Make sure you've scanned your computer for viruses and spyware.
    If that doesn't help, let's capture a minidump of the crash and send it to the Apple engineers to analyze.
    To set up your machine to capture a minidump, right click on "My Computer", select "Properties". In the dialog that comes up, select "Advanced System Settings" on the left. In the dialog that comes up, select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
    You need to send that file to our buddy Roy, [email protected] Make sure that you include:
    (1) the mini dump file.
    (2) the link to this thread.
    (3) a one line description of your problem, i.e. "iTunes Blue Screens Vista".
    (4) the username that you're using here in the discussion boards.
    Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

  • HT203175 While trying to use my iTunes library it will suddenly stop working with the erro message Runtime error R6025 pure virtual function call.  HELP!!!

    While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call.
    Help???

    Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
    We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
    However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
    STRANGE! Let me know if this works for you to!

  • Airtunes Streaming Stopped Working w/ iTunes 10.1.1.4

    I use an Airport Extreme and two Airport Express devices to stream music throughout my house. The firmware on all three is up to date. With the release of iTunes 10.0, I could no longer stream music to my two remote Airport Express units. I received an "Unknown Error (-15000)" message. iTunes 10.1 fixed the problem and everything worked great. I just installed iTunes 10.1.1.4, and now I'm back to "Unknown Error (-15000)". All of the above applies to both Windows 7 and Mac OSX Leopard machines. Any idea how to work around the bug? Is a fix planned? Does anyone know how I can roll my installation back to 10.1? I don't have the original files. Thanks for your help!

    Did you ever figure this out or confirm that the version number is broken now?
    I had a party and told everyone to make sure to bring their iPhones with Apple Remote installed... nobody could see my iTunes DJ... very disappointing and frustrating... I know it was setup properly.  And everyone had the latest version of Apple Remote installed.
    It seems to work with iTunes 9.2.1 on OS 10.4.11 but not with iTunes 10.2.2 on OS 10.5.8.
    Yes, I know this is the Windows iTunes forum but this seems to be an issue with iTunes 10 for both Win and Mac.

  • IPhone 4 stop working with ios 6.1

    iPhone 4 stopped working with ios 6.1, visited apple first time, restored phone and worked, less than 24 hours later stopped working again, back to the store, I told iPhone is out of warranty and they'll replace for $150. iPhone worked fine with previous version, no problem at all. Asked to restore to the previous software version, told can't be done. Why should I pay for a damage caused by a software update. Tec claims that ios 6.1 will not work with my phone because it discovered some hardware malfunction, possible the home button. They can't repair. suggested to go to a third party. I'm a satisfied Apple product user for many years. What happened? Any welp out there?

    Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
    Anyways after about 18h of search and stress I came across this link:
    http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
    That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
    Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
    When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
    Well hope that will work for you like it did for me

  • Sync iCloud-enabled iPhone no longer works with iTunes

    Both my wife's and my iPhone 4 and iPhone 4S stopped syncing with iTunes soon after the switch to iCLoud and iOS 5.0.1.
    Both phones are setup to backup into iCLoud and to sync via WiFi to the inhouse iTunes.
    At some point iTunes decided that both devices are no longer linked with our Computer (iMac 27 OSX 10.7.2) and insists whenever it 'sees' the iPhones on WiFi or the local cable that either devive has to be initialized or restored from the latest local backup (which is outdated due to the iCloud backups).
    No way to syn music, videos, movies to any of the devices ever since.
    Anybody else having the same issues with iTunes 'forgetting' previously paired iPhones?

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • 2 songs that worked with Genius and have playlists Stop working with Genius- Reset Genius?

    Is there a way to reset Genius to work with Songs it has stopped working with. Why would genius stop woking with songs?  Would it be because I fixed the media library with Tune Up and the song Genere was changed?
    I Changed it back and even deleted the 'Genius pref' from the iTunes folder. I hesitate  to turn Genius off/on as I lose all the playlists I have gathered, but if I have to to restore function I would. If I was sure it would help?
    One of the songs is 'Lovesick' by Lindstrom & Christabel. A popular purchased tune, Another, ''Four ton Mantis' by Amon Tobin is not purchased. Both are 'Electronica' Genre Both worked for many months with Genius with no issue. I even tried re-purchasing the song for $1.00 from iTunes... No dice. Genius says of both songs that not enough similar music appears to be available to refresh my Genius Playlists that Genius already made.
    Anyone have a clue how to fix this???

    Is there a way to reset Genius to work with Songs it has stopped working with. Why would genius stop woking with songs?  Would it be because I fixed the media library with Tune Up and the song Genere was changed?
    I Changed it back and even deleted the 'Genius pref' from the iTunes folder. I hesitate  to turn Genius off/on as I lose all the playlists I have gathered, but if I have to to restore function I would. If I was sure it would help?
    One of the songs is 'Lovesick' by Lindstrom & Christabel. A popular purchased tune, Another, ''Four ton Mantis' by Amon Tobin is not purchased. Both are 'Electronica' Genre Both worked for many months with Genius with no issue. I even tried re-purchasing the song for $1.00 from iTunes... No dice. Genius says of both songs that not enough similar music appears to be available to refresh my Genius Playlists that Genius already made.
    Anyone have a clue how to fix this???

  • Airfoil stopped working with Pandora

    I'd had great luck with Airfoil v2.0.8 streaming Pandora. It has stopped working with external sources such as Pandora. It still works with iTunes. Is it possibly due to compatibility with Firefox 3.0.3 or OS X 10.5.5? Any help is greatly appreciated. Thanks.

    Sorry, I wasn't trying to say you shouldn't post here, but you may have better luck with Rogue Amoeba's support. I am currently using AirFoil with OS X 10.5.5 without issues, but have not used Pandora radio as a source. Instead I've been using Slacker successfully with AirFoil.

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • App update descriptions no longer showing in iTunes 12.0.1

    Greetings, Since updating to Yosemite and iTunes 12.0.1.26, the app update descriptions do not show. Any app screen would look like this: Main file info is readable, but no text about the update. Others having the same issue?

  • Error while hitting OTM WSDL

    Error Details- [email protected] : Could not invoke 'process'; nested exception is:      java.net.UnknownHostException: otm-connor-otm-55-wl.us.oracle.com: otm-connor-otm-55-wl.us.oracle.com Hi Guys, I am getting the above error when i am invoking th

  • RV_CONDITION_COPY FUNCTION MODULE

    Hi, My requirement is to update the price for the condition record no in konp table by using rv_condition_copy function module. In this program i am trying to change the price of this condition record number but it is not affecting to the database. p

  • String substitution question

    Hello there, I have some SQL statements, such as: CREATE Table1 ( column1 INTEGER NOT NULL, column2 VARCHAR(20), column3 VARCHAR(30) ) INSERT INTO Table1 (column1, column2, column3) VALUES (?, ?, ?)where I want to put the names of the columns in squa

  • I am trying to download Firefox on my PC but it won't connect & keeps kicking me off

    no other details