AirTunes -  Unable to Play Music After Installing iTunes 7.1

I upgraded to iTunes 7.1 and all of a sudden I can no longer play music through my stereo speakers. iTunes gives an error "The Remote Speaker <speaker name> is not compatible with this version of iTunes". Airport Express is v6.2.
Has anyone encountered this error, and is there a fix?
PowerMac G5   Mac OS X (10.4.8)  

Ditto here.
Mac OS 10.4.9. iTunes 7.1.1 (5)
Airport Extreme Base Station "chained" to 2 Aiport Express Remotes. All connections are fine. Have internet on remote Macs. Airport Admin utility displays all three airport units, but I'm now unable to broadcast to the remote Express hooked up to my stereo in adjacent room. Have done this many times in the past without problem, but not in past couple months, so can't say if it broke with 7.1 or 7.1.1, but I get this message from iTunes:
The remote speaker "Living Room Speakers" is not compatible with this version of iTunes.
Prior to restarting iTunes (and being sure all Aiport station firmware was up-to-date, I was getting the message that no speakers were connected (double-checked all speaker and stereo connections), but now just the "not compatible" message.
G5 2.7 Dual Processor   Mac OS X (10.4.9)   2 GB RAM
G5 2.7 Dual Processor   Mac OS X (10.4.3)   2 GB RAM

Similar Messages

  • Problems playing mp3s after installing iTunes 7.1

    I installed iTunes 7.1 today. After that, I have problems playing mp3 songs on my iPod (80 GB). The AAC-files play well. The mp3 songs can also be played on iPod via iTunes when its connected to my computer, but when I disconnect from the computer, the mp3 songs starts, and play for about 2 second, and then jumps to the end of the song and stop.
    Very thankful for any help.

    that's typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    the following document may be of some assistance:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem

  • Unable to import cds after installing iTunes latest version 10.1.0.56

    I downloaded iTunes 10.1.56 after having problems with the 10.1.0.54 version. I can only download the first 1/2 of song 1 and nothing from the rest of any cd. Under "time" for each song, my library says "Not available". When I click on it to listen it gets skipped over until a previously imported song comes up. Same thing happened with the previous version as well.
    I ran diagnostics and here's the results. (It also says I'm not the Administrator but I am so that's confusing.)
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Dell Inc Dimension E521
    iTunes 10.1.0.56
    QuickTime 7.6.8
    FairPlay 1.10.14
    Apple Application Support 1.4.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.3.0.69
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 121XXXXXXXXXXAE3
    Current user is not an administrator.
    The current local date and time is 2010-12-03 17:13:02.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., Radeon X1300 Series (Microsoft Corporation - WDDM)
    ATI Technologies Inc., Radeon X1300 Series Sec. (Microsoft Corporation - WDDM)
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {812874D5-CBA7-4C6A-99E7-B10E8953437A}
    Description: Compact Wireless-G USB Adapter
    IP Address: 192.168.1.68
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.254
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.254
    Lease Obtained: Fri Dec 03 06:21:10 2010
    Lease Expires: Sat Dec 04 06:21:10 2010
    DNS Servers: 192.168.1.254
    Adapter Name: {2D8C2368-422A-4895-AC83-5B690A393C62}
    Description: Broadcom 440x 10/100 Integrated Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Last successful store access was 2010-11-29 19:11:34.
    ** CD/DVD Drive Tests **
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: HL-DT-ST DVD-ROM GDRH10N, Rev 0D04
    Audio CD in drive.
    Found 12 songs on CD, playing time 38:49 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 02:47:42
    Track 3, start time 05:19:53
    Track 4, start time 08:24:50
    Track 5, start time 11:13:39
    Track 6, start time 13:15:72
    Track 7, start time 16:53:66
    Track 8, start time 20:05:63
    Track 9, start time 23:08:11
    Track 10, start time 26:05:03
    Track 11, start time 29:25:22
    Track 12, start time 33:50:20
    Audio CD reading succeeded.
    Get drive speed succeeded.
    ** Device Connectivity Tests **
    iPodService 10.1.0.56 is currently running.
    iTunesHelper 10.1.0.56 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    AGERE OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod nano (3rd Generation) running firmware version 1.1.3
    Serial Number: 7M7XXXXXYXX
    ** Device Sync Tests **
    No iPod, iPhone, or iPad found.
    < Edited by Host >
    Message was edited by: Nubz N.

    many thanks, Lucky.
    There doesn't look to be any newer versions of Dell firmware for your DVD-ROM GDRH10N. It might be worth heading to Windows update and checking to see if there's a firmware update for that in your optional hardware updates.
    Otherwise, head to the following page at Dell:
    [Drivers & Downloads for Dimension E521|http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1 &dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=DIMP4E521&hidos=WW1&hidlang=en&TabIndex=&scanSupported=False&scanConsent=False]
    (It might indeed be worth entering your Service tag there, just to reduce the number of different available downloads for you to check through.
    Check in particular to see if your BIOS and the video driver for your ATI X1300 is up to date.
    There seem to be a lot of firmware updates for hard drives being listed for the E521, so also check to see if there's one for your hard drive. If so, it's probably best to update that too, just in case.
    If you were behind on anything and you update, try reimporting another of the CDs that has been importing poorly. Do you get a better import this time?

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • HT2292 After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed

    After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed.  Attempting to open the iTunes folder location locks up the computer and requires a cold reboot to restore.

    Hello, LoudenFam. 
    Thank you for the question.  Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    I hope it doesn't effect how I down load my itunes to my ipod and iphone.
    No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

  • Lost music file association in win 7 after installing iTunes.

    After installing iTunes on my win7 PC my music did not show up in iTunes and now when I go to the music files in windows it shows all the folders empty. I performed windows search on my drive and with some effort can find the music. Please note these files are not in the my music folder, they are in a file in my documents. ( I have a reason for that ).

    Ps the above question is how to I put it all back?

  • After doing an OS update, now iTunes stops playing music after playing a few songs.

    After doing an OS update, now iTunes stops playing music after playing a few songs. Any thoughts about how to remedy this?

    Same Problem here. Also, when this happens, it loses whatever album art was playing before. I've tried reinstalling and it doesn't help. Any ideas how to fix this? It's really annoying!

  • After downloading iOs 6.1.2i was unable to play music aloud however im able to listen to it with my headphones in as well as my phone is still able to ring out loud what can i do to fix this? whats causing the problem?

    After downloading iOs 6.1.2 i was unable to play music aloud however im able to listen to it with my headphones in as well as my phone is still able to ring out loud what can i do to fix this? whats causing the problem?

    You need to continue with the Recovery...
    Once the Device is in Recovery Mode... it is too late to save anything...
    To minimise loss... After the successful Recovery... Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Songs are greyed out on iphone and itunes unable to play music

    I have loaded all my songs on to imatch.
    Now I am unable to play over half my itunes songs.
    On my iphone they are greyed out and don't have a cloud next to them
    On itunes the songs have a cloud next to them but i can't download the songs nothing happens when i pressed the button.
    Please some one help 
    Mac Version 10.8.4
    Itunes Version 11.0.4
    Thank you

    jhl1951,
    Is the Shuffle still configured to manually sync content to it?  You can check by making sure the proper configuration is made from under the Shuffle's Summary tab in iTunes while it's connected.
    B-rock

  • Apple TV stops playing music after 5 minutes requiring iTunes restart

    I am using a 2nd gen Apple TV, Apple Airport Extreme, and a PC.  Since the latest Apple TV update, whenever we play music from our iTunes library the music only plays a maximum of 5 minutes then stops.  To get it to play again I have to exit iTunes on my PC and start it up again.  There are no error messages to indicate what may have happened.  I have tried a bunch of different things including restarting everything multiple times, disabling the screen saver on the Apple TV and restarting my router.
    I have been using this particular Apple TV since release without issue and and have only experienced this since the last Apple TV update.  Help!
    Thanks

    I have the same problem and haven't found an answer or seen one. I don't have any problems downloading/streaming off the net but the iTunes timeout is driving me crazy. Did you ever find the problem?

  • "Holiday" Section in Radio Streaming Disappears after Installing iTunes 9

    Yup, as the topic suggests, after installing iTunes 9 on my Macbook 13' just recently, I realised that my favourite radio stream, 'Holiday' in iTunes has mysteriously disappeared. Is there anyone who has experienced a similar incident as I have? Does anyone know of any way for me to place this Holiday section back?
    Thanks in advance.

    Is this the station you seek?
    http://www.live365.com/stations/winterscapes
    Remember, all the stations shown in iTunes' Radio section are just feeds from other streaming audio sites. Apple does not host or create any of these feeds and the offered stations change frequently - especially as part of an iTunes upgrade. Many of the iTunes offerings are actually Live365 stations.
    If you get the station to start in iTunes from that link, that creates a 'Music' entry in your iTunes library that you can reuse. It will eventually stop working and you'll need to revisit the Live365 site to get a 'fresh' version of the station.
    If the link opens and plays through a web based player window you'll have to edit your playback preferences through the Live365.com site to use an external MP3 player which will then redirect it iTunes. Definitely more of a hassle, but it will work.

  • After installing iTunes 10, external drive error

    The library which the previous iTunes 9 was connected to is on my external WD 2TB drive. After installing iTunes 10, I played around with the interface for a few minutes, and then I shut my computer off.
    This morning, I turned on my computer and my external drive loaded up. But when it opened iTunes and started reading, the external started to be read, and it ejected automatically... and error window popped up warning me that it wasn't ejected properly.
    From then on, this kept on occurring. The drive loads up but after a few minutes it gets ejected again. I don't know what happened.
    I checked with Disk Utilities, and there was zero problems.
    Could someone help me with this problem? I have changed to different firewire cables from very short, to long etc but still the same issues. I don't want to keep doing this as it might corrupt all my data...many years of of collected photos, music, movies etc...as well as a major part of my work files.
    This is so sad, and I just wished I bought a second drive to clone the one I have. Lesson learnt.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

    My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

    A 2nd gen shuffle is about six year old at this point.  The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge.  The initial green light shows a good charge.  The red light means the battery is drained.
    Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle.  The Restore button is on the shuffle's Settings screen in iTunes.  This will erase the shuffle, re-install its software, and set it to default settings.
    Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds.  Then, turn it back ON.  This resets the shuffle.  Does it play again?  If it does, let it play until it no longer plays again.  Repeat turning it OFF and ON until it no longer plays.  Then, connect it to power and charge it to full.  See if that makes any difference.
    If that does not help, the solution is to replace the battery.  If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
    If you are good at such things, this web site has repair guides
    http://www.ifixit.com/Device/iPod_Shuffle

  • IPhone is no more visibile in My Computer after installing iTunes 8

    Hi all, after installing iTunes 8, iPhone isn't visible anymore in my Computer section in Windows. Previously, when I connected it, it was recognized as a photocamera and, from my Computer, i could access to it to see the photos that are stored on the iPhone.
    Now, instead, iPhone isn't displayed anymore: except for this, it works correctly; iTunes 8 recognizes it and synchronizes it.
    Notice: after the iTunes upgrade, when I've connected the iPhone for the first time, Windows says that he has found a new hardware and installed a new driver for an Apple Mobile Device USB.
    Has someone else experienced my problem? Thanks in advance!

    im having the exact opposite problem....my 3g is recognized inmy computer as a camera..but isnt recognized in itunes?
    i have no pics downloaded from emails (as i researched this before)
    the other night had same problem, had to restore phone, and re-install itunes..then no problem...but tonite trying to add new music and same thing again.
    disabled iphone under imaging devices, and its only listed under usb controllers...computer recognizes it every time
    there has to be a better way than restoring/reinstalling everytime?..has to be some little catch?
    HELP!
    FYI, i phone not being used as phone, being used as ipod, and only using wifi..has no sim installed.

Maybe you are looking for

  • TEXT_IO with Read

    HI, I have a Text file, in that each column separated by "TAB". I have to read each column and display it into Oracle forms(Forms6i). Using TEXT_IO package, how can i do this ? Thanks in advance.

  • NERO Burning ROM & disk images

    hi, I have successfully downloaded the images, unzipped them and appended the .iso extension to the extracted files. Firstly, Nero burning rom 5.0.2 is what I am using. Is this the correct version ? Secondly, the .iso extension is not associated with

  • BP opening

    hi all,         i add balance of creditors and debtors through (system initialization-opening balance-BP opening balance).         I use +ve amount for debit and -ve amount for credit but problem is when i check JE for same it shows me +ve amount in

  • Sharpening: Aperture vs. DPP

    Hi all, I've been using Aperture for about 2.5 years, and I like it.  I was going through some old photos, which I had processed with Canon's DPP software, and they were strikingly sharper and crisper than my current Aperture work.  Has anyone else h

  • Wrong Reader Version - Acrobat 10.1.1 is actually 10.1.0

    I just downloaded the distribution version of Acrobat Reader 10.1.1 (AdbeRdr1011_en_US.exe) from http://get.adobe.com/reader/enterprise/ In preparation for deploying it my organisation, I have extracted the EXE with 7zip and done a test install on my