Airtunes user with a minor problem: Ethernet

Hi everyone I am a mostly satisfied Airtunes user with a minor problem I hope someone can help me with.
The Airtunes/Airport Express is working perfectly with my stereo and my usb printer. But even after reading and tinkering I cannot make it connect via ethernet to my G3 iMac.
My setup is thus: A G5 Dual 2Ghz has the Airport Extreme card inside it and the aerial attached. That's in the studio. In the lounge is the stereo, Airport Express and the printer and iMac.
I have the Airport Admin Utility 4.2 and there are no updates available according to Software Update. I don't have any security activated and have turned internet sharing off for the base station. I have turned WDS on. The amber light has been flashing since I first plugged the Express in yesterday. I'm using OSX.3.9 and the Admin Utility still says I am on a WAN Network, even though I am trying to setup a LAN thing so I can access the printer and G5 from the imac through the ethernet cable.
Reading around I have discovered advice that says things like: 'yes, you can connect via ethernet to an existing network using WDS... 'and then stops there. It doesn't say how, or if it says 'the Express base station needs a static ip for the ethernet to see it', it never says how to assign the ip, what it should be, just assumes I must know what that means, rather than going through the necessary steps.
So could someone please help with this? To me this seems the absolute most basic setup anyone would use and should be in the manual, or at least on the Airport Support site. Why can't the imac (also using OSX.3.9) scan for available networks and see what is hanging off the other end of the ethernet cable?

I could be mistaken, but I believe it is not possible to do what you are trying to do. I don't think you can connect the Airport Express via WDS to an airport card installed in a Mac.
You were correct when you enabled WDS on the Airport Express in an effort to share the internet connection, but I think you are only half-way there. I think you need to add an Airport Extreme to your network to act as the WDS master for the Airport Express.
In this case, you would put the Airport Extreme next to the G5. You would plug the internet connection (from DSL or cable or whatever) into the Airport Extreme. You would then set it up as a WDS master and add the Airport Express to the new wireless network using the Airport Utility that comes with the Airport Extreme.
Lastly, you connect the G5 wirelessly to the new network and plug the iMac into the ethernet port on the Airport Express. The iMac will not know it is on a wireless network. It will just get an address through its ethernet connection and start working.

Similar Messages

  • New user with strange font problem

    I created a user account for my girlfriend...when she brought up the safari the google homepage had a strange grafiti font for all the text. (I say strange, but it's one of my many fonts in the collection) I opened up firefox and had the same problem...this morning I realized it was doing it in mail as well. Under my account (the admin and original account) there isn't an issue, but I've looked all over and can't find a setting to fix it for her account.
    It's driving me nuts. Any help would be greatly appreciated.
    15" Titanium Powerbook   Mac OS X (10.4.8)  

    ..."I say strange, but it's one of my many fonts in the collection"...
    Since it sounds like you know the name of the font, you could try to see if anything turns up with the command below, which searches through user preferences for a given string:<pre>defaults find "font name"</pre>A partial font name should be fine. Enter the command using "/Applications" > "Utilities" > "Terminal.app".
    Also, the caches (associated with a user by the 'uid') don't appear to be cleared when an account is deleted. So if a new user is created and gets assigned a previously used 'uid', they may inherit the old cache files. For starters, try clearing out any file or folder whose name contains the user's 'uid', such as the "/Library/Caches/com.apple.IntlDataCache.###" file or the "/Library/Caches/com.apple.ATS/###" folder belonging to the affected user. Then log out and back in. To determine the user's 'uid', try:<pre>id -u username</pre>

  • First time Mac User with a video problem

    Hi. First of all I am a brand new Mac user. I am having problems watching videos. It constantly plays for a second or two, possibly a minute and then stalls....I wait....it picks back up, plays for a second or two longer and repeats the process, so basically it is a very bad viewing experience all around doing this. I have all the software updates. I am a former pc user so trying to adjust to the Mac. I don't know where to begin on fixing this so if someone has any insight or could help it would be great.
    I have also noticed it is doing the same start-stop activity when trying to listen to a 30 second music clip in itunes....start, stop, start, stop. So you never get a continuos listen to those clips or watching any video. Very annoying and there has to be a way to fix this, just don't know how to do it on a mac. Need a little help.

    If you are using wireless, you might want to try plugging your computer directly into the cable or DSL modem and running the speedtest again. This will determine if it's a connection problem, or a problem with your wireless (possibly your router). I recently had a router go bad, and the only symptom was it was cutting the connection speeds in half, both wired and wirelessly. When I plugged straight into my cable modem I had full speed.
    What is really strange is the disparity between your upload and download numbers. Usually, the upload is 1/10 of the download, not 2x larger. I've only seen this at work where they throttle our download speeds to 6,000 kbps to keep us from downloading large files for free on the wireless, while the upload speed runs 20,000 kbps. At my home, for example, I have 4,000 kbps download, and 400 kbps upload.

  • New user with a small problem...I bet...

    I just started using flash, but I am getting a bit better. I
    purchased a template through monster and have slowly picked up on
    flash. Here is my problem and forgive if I use incorrect
    terminology or seem ignorant...
    I have a page on my site that has 4 buttons on each
    side...movie clip over a button...looks like a bar with a small
    arrow movie clip on the end. I am sure you know what I mean. When
    you roll the mouse pointer over the page it obviously is supposed
    go through its actions and alert user there is a link. If I put my
    code on the movie clip, you have to move the mouse over the arrow
    to show the link. If I put my code on the button layer, it causes
    all 8 of the buttons to have the same action/link and if I change
    one it changes all.
    website:
    http://www.accordproperties.net
    rentals page
    What am I doing wrong? I can't seem to figure it out.
    Text

    reduce the size of your #mainCotent to something like 580px and the white space is the top margin and top padding of the <h1>...simply zero it out in your css. Same issue with the last <p> in your #mainCotent...padding and margin is keeping the footer from coming up all the way. Also give your #mainContent some padding to push the text inward. Then you can also give the imgs some padding as well to space off the text. Going to take some fine tuning but this will at least get you started.

  • UK User with Cable Modem Problem

    Hi all
    I have just signed up with VirginMedia for TV and Broadband. Access to the internet is offered rebranded Ambit U10C018 Data Cable Modem. I have a Mac BookPro 2.33GHz and a Airport Extreme 802.11n base station (firmware v7.2.1) providing my wireless network.
    Wired access to the internet (i.e. connecting my MBP to the cable modem via an ethernet cable) is fine.
    The problem I have is when I surf the web wirelessly. Requested web pages are taking a long time (15-30 seconds to load); pages which load instantly via a wired connection. I have used the AirPort Utility to try various different settings but they have not made any difference. The VirginMedia engineer who came to my house has suggested that there is an incompatibility between the AEBS and the cable modem.
    The Ping and Traceroute output below look normal. NsLookup returns quickly, so I don't think there is a DNS problem.
    My question is whether anyone else has had any similar experiences? What advice can you give me here? Should I look at getting another wireless base station?
    many thanks
    Nigel
    <pre>
    Ping has started ...
    PING google.co.uk (66.249.93.104): 56 data bytes
    64 bytes from 66.249.93.104: icmp_seq=0 ttl=242 time=41.412 ms
    64 bytes from 66.249.93.104: icmp_seq=1 ttl=242 time=27.236 ms
    64 bytes from 66.249.93.104: icmp_seq=2 ttl=242 time=26.675 ms
    64 bytes from 66.249.93.104: icmp_seq=3 ttl=242 time=22.958 ms
    64 bytes from 66.249.93.104: icmp_seq=4 ttl=242 time=110.269 ms
    64 bytes from 66.249.93.104: icmp_seq=5 ttl=242 time=31.007 ms
    64 bytes from 66.249.93.104: icmp_seq=6 ttl=242 time=28.013 ms
    64 bytes from 66.249.93.104: icmp_seq=7 ttl=242 time=25.478 ms
    64 bytes from 66.249.93.104: icmp_seq=8 ttl=242 time=26.804 ms
    64 bytes from 66.249.93.104: icmp_seq=9 ttl=242 time=125.384 ms
    --- google.co.uk ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 22.958/46.524/125.384/36.118 ms
    </pre>
    <pre>
    Traceroute has started ...
    traceroute to www.bbc.net.uk (212.58.253.72), 64 hops max, 40 byte packets
    1 10.0.1.1 (10.0.1.1) 1.991 ms 0.570 ms 0.807 ms
    2 * 10.7.236.1 (10.7.236.1) 10.315 ms 8.286 ms
    3 herm-t2cam1-a-v107.inet.ntl.com (80.3.34.33) 18.271 ms 8.380 ms 29.011 ms
    4 hers-t3core-1a-ge-011-0.inet.ntl.com (195.182.176.241) 18.537 ms 10.507 ms 10.328 ms
    5 bre-bb-a-so-110-0.inet.ntl.com (213.105.175.37) 10.207 ms 12.809 ms 11.880 ms
    6 gfd-bb-b-so-120-0.inet.ntl.com (213.105.172.150) 10.421 ms 26.259 ms 12.814 ms
    7 redb-ic-1-as0-0.inet.ntl.com (62.253.185.78) 13.022 ms 13.719 ms 24.336 ms
    8 212.58.238.189 (212.58.238.189) 14.638 ms 24.925 ms 18.858 ms
    9 212.58.238.133 (212.58.238.133) 17.176 ms 22.429 ms 15.177 ms
    10 fe0-0.rt0-frontpost.prodgw.bbc.co.uk (212.58.239.222) 25.854 ms 15.577 ms 14.366 ms
    11 * * *
    12 * * *
    </pre>

    I wonder if my problem was solved which seems similar to yours. I have just brought a preused G3 , 400, running Panther. I want to use this as an backup to my DLS G4. It all seems oka and does everything it should do, but it seems unable to make a connection with any ISP. You can hear the modem dial out, but it fails to trigger a response from any ISP and the ISP numbers have been checked and rechecked, and I have checked permissions and done an erase and reinstall
    I have a feeling that this computer came from off a LAN and the modem has been in some way inhibited to prevent staff accessing the WWW. Has anybody come across this and is there anything I can do to get internet access.
    Any help much appreciated
    Vernon
    UK

  • I know that there has been a big problem with logic boards on the MacBook Pro - shouldn't there be a recall? When I searched online about this problem was surprised to see so many MacBook Pro users with the same problem.

    My computer was on one minute and off the next and will not restart. I took it to the apple store and
    They said it is the logic board. I have been researching it and see that many MacBook Pro users have
    Had the same issue. Doesn't seem fair to have to pay for something faulty on Apple's end. The computer
    Is less than 3 years old. I expected it to work for a lot longer than this. Is there anything I can do that won't
    Cost me? Also, how do I retrieve my files. I know they are on the hard drive but how do I get to them without
    Having apple do it and probably charge me?
    <Subject Edited by Host>

    Did you buy AppleCare?
    I guess not or you wouldn't be complaining.
    how do I retrieve my files. I know they are on the hard drive but how do I get to them without
    Having apple do it and probably charge me?
    Easy, open it up, remove the drive and use a SATA to USB adapter to another Mac (or Windows PC with MacDrive)
    My computer is dead, is my personal data lost?
    For iPhoto Library, that's really a folder (it looks like a package) it can be right clicked on by OS x and "show package contents" to get the Origianls out.
    However I don't know right off hand how that would appear on a Windows PC, perhaps as a iPhoto Library folder, perhaps not.
    But the files are on the drive, and Data Rescue (Windows) can always be used to grab them directly.
    iTunes Library can be transfered to a PC, as long as the account name is the same, it should work fine and maintain your playlists hopefully, but the music is easily accessible.

  • Leopord Users with intermittent access problems

    We have intermittent issues with network users on two separate servers not being able to login, or loading the wrong group permissions from the server. We have tried deleting /Library/Managed Preferences on the local machine to force reloading,and it sometimes fixes the issue but not always. We end up logging in/out and restarting a number of times until the right permissions load. Apple says upgrade to Snow Leopard, but that would mean new intel based servers and we have apps that have not been approved on snow leopard.
    Does anyone have any other ideas how to deal with this issue, ie, does anyone use the computer list in workgroup manager?

    Welcome to the Apple Discussion forums.
    Setting the options using the Print & Fax dialog box seems to be saving the installed options for a test printer I just installed using the lpadmin command. You could also try using the web interface at _http://127.0.0.1:631/printers_. Just click on the printer and then choose set default options from the pop up menu.
    Matt

  • Ubuntu user with a DWM problem

    First off, please hear me out!
    I've tried posting this on the UbuntuForums, but get little response and very few Ubuntu users use DWM, I figured a lot more people would be able to help me here.
    Basically, DWM pays no attention to my .xinitrc file, which is linked to my .Xsessions file. This same .xinitrc works fine on Debian and Arch (afaik). I'm just wondering if it's a user error or distro or dwm, or whatever.
    Anyway, here is my .xinitrc. Any help is appreciated.
    #!/usr/bin/env bash
    sh ~/.fehbg &
    #feh --bg-scale /home/fin/pictures/bg/02408_burningautumn_1280x800.jpg &
    #nitrogen --restore &
    #while true; do
    # xsetroot -name "$( date +"%F %R" )"
    # sleep 1s # Update time every minute
    #done &
    #mpd /home/fin/.mpd/mpd.conf
    #gnome-settings-daemon &
    #nm-applet &
    #gnome-power-manager &
    #exec `awesome --config ~/.config/awesome/rc.lua`
    exec dwm
    I've commented out things to try to narrow the problem down. It doesn't even save my wallpaper.

    I am assuming if you have Ubuntu then you will be using the GDM login manager. If that is so, then all you have to do is choose the dwm "Session" from the Session drop-down box on the GDM login screen.

  • New User with a format problem

    Hello All!
    I am wondering if anyone could help me with an issue.  It seems my formatting has gone astray and pushes my main content past my sidebar on my website.  The site is www.innergazeyoga.com.  It appears fine in dreamweaver and even in firefox but not in IE.  I have trying to resolve the issue by reducing the width of the sidebar as well with no luck.  It also appears that other formatting has either disappeared or a late night delete moved the text away from the second photo.  Any suggestions on fixing the huge space under the header and get the content box back up there?  Thanks

    reduce the size of your #mainCotent to something like 580px and the white space is the top margin and top padding of the <h1>...simply zero it out in your css. Same issue with the last <p> in your #mainCotent...padding and margin is keeping the footer from coming up all the way. Also give your #mainContent some padding to push the text inward. Then you can also give the imgs some padding as well to space off the text. Going to take some fine tuning but this will at least get you started.

  • PDF addresses not longer load and display PDF in Firefox and solutions suggest to other users with problem DON'T WORK (work fine in Chrome and Safari)

    This is an ongoing problem with other users. When putting a PDF in address window of Firefox and clicking go to address FIREFOX WILL NOT LOAD AND DISPLAY THE PDF. This problem has come up in questions from other users on your site. NONE OF THE SUGGESTED SOLUTIONS WORK! (trying either the Firefox PDF viewer or the Acrobat viewer as default viewer)
    I am using Firefox 23.0.1 (as some of the other users with the same problem). This was not a problem in the past with Firefox. Safari and Chrome continue load and display PDFs just fine from their addresses. This is a big problem as I now have to inform people who want to view my PDFs NOT TO USE FIREFOX BUT TO USE SAFARI OR CHROME.

    It appears that a link to a PDF on an internet page will not download in Firefox either!
    I went to this page:
    http://www.nasa.gov/connect/ebooks/earth_art_detail.html#.UjYEzrwsU08
    and tried to download the PDF link at the bottom of the page (Download: PDF 11.3 MB) It didn't work! Nothing happens. Tried it in Safari and it worked flawlessly.
    I have a PDF file of my work in the public_html folder on my URL. I give the address generated by that file to people who want to view my work---this works perfectly in Safari and Chrome. As to your other question, can't bookmark it if I can't get to it in Firefox.

  • Connect to a cube with Integrated WIndows Sercurity for Windows user with computer outside the domain

    Hello,I am trying to connect to an MSSAS cube with a windows user ( and i need this user to be the end user that connect to the cube) from outside the domain.It will be .Net application.I use msmdpump.dll before but the thing is it impersonate the connection
    so the user that connect to the Cube is not the real client user with is a problem for me because i like to manage the security throw roles.
    SSRS is able to do what i am trying to achieve ( it ask you your domain user and password) then connect to the cube with these credential which is great,but i do that ?
    With ADOMD.Net how do you provide windows user/password in the connection string ?
    I tryed to only active windows security access with IIS and MSSAS but it's not working with a computer outside the domain even if in excel i provide a windows user/password.
    Vincent

    With ADOMD.Net how do you provide windows user/password in the connection string ?
    Hello Vincent,
    See MSDN Connection String Properties (Analysis Services) for all available properties; addtitional: AdomdConnection.ConnectionString
    Property  =>
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Minor problem - I have 4 folders in the dock, but when I press on the icons for two of them, there is no choice of "display as folder" or "options". Can somebody tell me why not? Thanks!

    I have four folders in the dock. Two are fine. The other two of them will not allow me to press on the stack's icons to view the commands "Display as Folder" or "Options". Can somebody help me out with this minor problem?
    Thanks!

    Are you right - clicking (control-clicking) them? The following should appear if you do that, and allow you to change the folder's appearance in the Dock:

  • Two eMacs with two different problems..Any help greatly appreciated.

    Hi i am new to the mac world and have recently aquired two eMacs, one with a minor problem - no sound from speakers other than at start up and no sound even through headphone jack, the other has a slightly more complicated problem, when you first turn it on it will not boot at all goes to a grey screen and there it sits, so i force quit and re-boot this time i get an apple and apples progress bar i call it looks like vertical lines in a circle and then there it sits, on the third time it finally boots in to OS X 10.3.2 i believe is the OS and i was told when i recieved this one that it will crash after sometime of stayin on. So any help or if this issue has been addressed please point me in the right direction.
    Thanks

    Hi jahnel,
    First machine - not much clue I'm afraid... Am assuming you know to turn the sound up What I'd suggest is doing what I'm about to suggest for the second machine...
    Second machine - Do you have the original eMac startup CD/DVDs? On them there is a program called Hardware Test, that performs a check of the computer's hardware. If you can run it, it can at least hopefully rule out any hardware issues that may be causing your problems.
    Next idea, is to boot from the/a system instal disc, and perform a fresh instal of the Mac OS. Further, I'd first suggest re-initialising the hard drive, to give you a clean slate.
    If the computer will not boot from the instal CD/DVD, what you can do is start the eMac in Firewire mode (Hold down the Command and "T" keys during startup), and connect the computer via firewire to another Mac. It will mount the eMac's hard drive onto the other computer, so that you can then use the other computer's optical drive to perform a System instal (In this case, you could actually use the "First machine" to perform the instal on the "Second Machine").

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

    Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

    You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

Maybe you are looking for

  • How can I export ALL photos to a new external HD if I have Aperture "Managing" my library (hundreds of projects,1.6TB of photos)?

    I Originally setup Aperture years ago to "Manage" my huge amount of photos to save space and be more convenient. I have bought a new external HD and want to export my entire original files from all the different projects and sub projects from the one

  • Apple Studion Display LCD 15" dying?

    My Apple Studio Display (LCD 15", purchased 2000) visual display is intermittently shutting off. Audio remains functional, and I can still type while the display is absent and when it comes back what I typed (ie, on a word doc) is there. The screen s

  • IMP Version incompatibility between 10.2.0.4 and 10.1.0.5.0?

    Dear all, I am trying to run to do an import from oracle 10.2.0.4 to 10.1.0.5.0 So on the source server, I did an exp of the db And on the destination server, I am doing an IMP I am having the below error: IMP-00008: unrecognized statement in the exp

  • Reg: sap abap

    Hi Guys, Could you pls. slove this question. My question is if i give a sales order no, i have get the item no and material no. from that program. thanks in advance

  • Verifying Data Integrity Outlook 2010

    Hi, We are using Microsoft SBS2011 including Exchange 2010 one of users could not start his Outlook 2010. the screen  shows "Verifying Data Integrity" which takes hours. I check his .ost file at his computer, which is about 50GB. Does Outlook 2010 ha