AirTunes using Airport Express - Low sounds level in speakers

Recently, I started having a problem with the sound level coming from the speakers connected to my Airport Express. The setup worked fine until a few weeks ago.
Actions I have tried:
(1) a hard reset of the Airport Express - no improvement
(2) connecting speakers directly to laptop - sounds level was great
Software I'm using:
- iTunes v7.1.1.5
- Airport Express Firmware v6.2
Thank you in advance for any help.
IBM Laptop ThinkPad Windows XP Pro

I suggest that you upgrade your AirPort Express Base Station's (AX) firmware to version 6.3.

Similar Messages

Airport express low sound volume

I've had an airport express for a few months now and have been happily using it with my external stereo system to stream music. However, recently the volume coming from the airport express has basically disappeared - there is almost no signal at all. I have to turn up the volume on my amplifier all the way to hear any sound, and at that level the sound is covered with static and is gross.
I've seen another post about a similar situation with an existing airport user, and it looks like I have a similar problem. Note that I did not change anything with the configuration between the amp and the airport express, i have the "disable itunes volume with remote speakers" option on. I've tried the airport with multiple other amplifiers and nothing works. I'm convinced that the airport is malfunctioning, perhaps its internal preamp is blown?
Does anyone have any experience with this?

Thank you Totem ; )
But unfortunately, I don't think we are talking about the same thing... Effectively, I've noticed a loss between iTunes 6.0.1 and iTunes 6.0.4 when I downgrade, but my problem, our problem here, is that the sound hasn't a 33% loss but really a 80/90% !!! I've got to push up the volume so much that if I plug my ipod with the same cable at the same place, my ears bleed (quite ; ) )...
Of course,
- I've checked the "disable itunes volume with remote speakers" and my ipod is at its maximum...
- I've tried airfoil (with RealPlayer and VLC) and this is the same, a very low/weak sound...
- I've downgrade the Airport Express firmware to 6.1.1
I've got a party at home tomorrow... :_(
Do I have to consider the airport express as broken ?
PowerBook 17" 1 Ghz Mac OS X (10.4.5)

Airport Express - Movie sound on external speakers

Is is it possible to hear itune's movie/radio via the external speakers that are hooked on the airport express. Music works fine.
Thanks.

I found this info given by rogue amoeba confirming my problem:
http://rogueamoeba.com/support/knowledgebase/?showArticle=AirfoilVideoPlayer
I think my issue cannot be solved, I just wanted that my whole computer sound environment can be played via airport express. I will still need a cable to hear the sound of youtube, etc.
Very unsatisfying, I bought the Airport express because i thought it gives me a "one device solution". Marketing ********.
Still, thanks for your help!

How to use Airport Express as a sound output device

Guys,
Is there a way that I can use Airport Express as a sound output device? So, I can play all the sound on my HIFI.
thanks in advance

In order to listen to the non-iTunes audio streams through your Airport Express you will need to use the third party software Airfoil.
http://www.rogueamoeba.com/airfoil/
iFelix

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

Using Airport Express / Airtunes to play audio from Safari / OSX?

Just bought my first Airport Express. Can I use Airport Express / Airtunes to play out audio from Safari / OSX (or other applications) to my home stereo?

Hi Fenneberg:
Welcome to Apple Discussions and congrats on your AE purchase!
You'll need a 3rd application to stream music to your AE from other applications like Safari. It's called Airfoil and it can be found at: http://www.rogueamoeba.com/airfoil/
I hope this helps!

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

Best Practices for Using Airport Express to Stream iTunes via Ethernet

So I've been reading various posts about using Airport Express to stream iTunes and I've been reading various posts about using the Ethernet port on the Express. However, not sure I've yet found an inclusive listing of settings for both. Wondering if anyone out there has such a thing?
I have an (older) Aiport Express (802.11g, no 'n') running the latest Firmware (6.3, I believe). I have it lashed into my switch via a Cat 6 cable and the 3.5 stereo mini running out to RCA jacks into my RussSound (home audio system) amp. I'd like to make the Express ONLY a iTunes streaming device getting its network link over Ethernet (AirTunes). So, what does everyone suggest for best settings for turning on the Ethernet, turning off the WiFi and running AirTunes?
Thanks much in advance!
cheers
cp root

Airport > Wireless > Wireless mode "off"
Internet > Internet connection > Connect using "Ethernet", Configure IPv4 "via DHCP"
Music > Enable Airtunes
Enable Airtunes over Ethernet (if this choice appears).
When I first did this, the remote speakers didn't appear in iTunes. I poked around to see what I missed and couldn't find anything wrong, but the next time I ran iTunes the remote speakers appeared.
If you run into a firewall problem, make sure your OS X firewall is configured to "set access for specific services and applications": http://docs.info.apple.com/article.html?path=Mac/10.5/en/18503.html
Firmware 6.3 is correct for your Express.

Low sound levels in Photo Booth and Imovie

I am a new Mac user and I am trying to record a short video to email using the built-in Isight camera. I have tried to use Photo Booth and Imovie and both of them produce videos with very, very low sound levels. You can barely hear it even when turned up to the max. I have checked the Sound preferences, and it is set to the built-in microphone, about mid-level. I've tried cranking it up to the max and with and without Use ambient noise reduction checked. It has no effect. How do I get a decent sound level? It is unusable at this point. I've updated my Software and repaired permissions, and still no luck. Any help would be greatly appreciated. Thanks.
daomun

Thanks for the response. I checked my midi audio settings and they are at the suggested rate. I called up an Apple support tech, and after trying a few things he basically said the internal mics are junk and go buy an external one. In the mean time, I've cranked up the sound levels to max, so I can hear it a little, but there is a ton of background hiss. I've done a web search and several people have reported this problem. so I think it might be something besides junk mics. Why do they install them if they are completely unusable? Thanks again. I'll try trashing the sound pref's too.
daomun

Using Airport Express as internet connection for one Mac and one PC

Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

No, not if the AirPort Express "joins" the wireless network.
No, I do not want to join a network.
It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.

Using Airport Express to extend an existing wired/wireless Dlink network

Our network uses a Dlink router which must be located in the basement. Our home office Apple computers are wired, and the wireless Apple laptop is almost always used in the living room, directly above the Dlink, so no signal strength problems there. However, the wireless signal does not reach as far as the home office. It's only 20-25 feet away on the main floor, but for some reason, probably structural, the wireless signal doesn't penetrate.
Now I need to extend wireless access capability to the home office, so that I can use the iPod Touch in the office. I've read through a number of posts, and haven't found one that exactly matches this issue.
The information about joining an existing network has this sentence in it:
"Or you can use AirPort Express or AirPort Extreme to extend the range of an existing AirPort Extreme or AirPort Express network by creating a Wireless Distribution System (WDS)."
The existing network I have isn't an AX network. And it's both wired and wireless. And one of the detailed posts explained why a WDS was not the best way to go. Plus I'm confused by references to "base stations" which seem to refer to something that looks like a Time Capsule, not to an AX.
If AX will do what I want it to, I'm envisioning plugging it (all by its lonesome) in to a wall outlet in the hallway outside the home office. That's based both on what I want and what the salesperson said AX could do when I explained what was wanted.
The Dlink network has been working beautifully for months, and I don't want to do anything to screw it up! That includes even opening up the AX utility software until I know exactly what to do.
Can I do the setup (once it's explained!) on the wired computer? If I have to connect the AX to the network as part of the setup, can I use the 5-port switch that extends the wired connection the extra two feet to the computer (and also provides the wired network connection for the main printer)? Or should I take the laptop downstairs and connect the AX directly to the Dlink router?
Thanks,
Marg

+If I connected the AX by cable to my 5-port switch (which in turn is connected directly to the Dlink), would that constitute "an ethernet connection to the D-Link"? If so, then it should be possible to use it as described in your 6th paragraph, to "expand ... (our) main wireless network" -- is that right?+
Yes, this will work great.
+I'd never heard of ethernet powerline adapters, which sound very cool but are not wireless per se - you need a cable to connect the computer with at the far end, and it's wireless capability that I'm trying to create in the home office.+
Rather than hooking a computer up at one end, you could hook up the AirPort Express at one one and setup wireless that way. You won't need the adapters in this case since you have access to the switch. You may have need sometime in the future to get an ethernet signal to another part of the house, so keep this option in mind.
Here is how to setup the AirPort Express. You will use AirPort Utility, which should already be on your Mac Pro. Its located Hard Drive > Applications > Utilities.
Temporarily, connect the AirPort Express (AX) directly to your computer with a short ethernet cable to set it up. When you have the configuration done, you can disconnect the cable and move the AX to the location where it's needed.
Open AirPort Utility and click Manual Setup
Click the Base Station tab below the row of icons to enter a name and device password for the device and choose your time zone, etc.
Then click the AirPort icon in the row of icons at the top of the setup page.
Click the Wireless tab below the icons
Wireless Mode....Create a wireless netork
Wireless Network Name....Exact same name as your D-Link wireless network name
Radio Mode....802.11n (802.11b/g compatible)
Channel...Automatic (see note* at bottom)
Wireless Security...exact same setting as D-Link network
Wireless Password....exact same setting as D-Link network
Click the Internet icon in the row of icons
At the bottom of the page, make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)". This setting allows the AX to work in tandem with the D-Link.
Update to save settings.
*Automatic will usually work well for this. Ideally, you want the D-Link and AX to be on channels that are least 5 channels apart. Automatic will usually choose an open channel, but you may need to manually set the channels on both routers for this step.
Your setup should work fine. Please post back on your progress or questions.

Can't use Airport Express after upgrading to Leopard

I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
I am open to suggestions to try a few things to get it working, so any help is appreciated.
Message was edited by: a j

From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

Using Airport Express with Internet Sharing in Leopard

Howdy all,
I have Internet Sharing enabled on my MacBook Pro running Leopard 10.5.4. I use a Sprint Sierra Wireless Aircard 597E modem to connect to the Internet.
I'm trying to get my Airport Express & Time Machine to recognize my MacBook Pro, or the other way around. Basically, I want to be able to access the Airport Express to wirelessly play music through a pair of speakers and be able to access the Time Machine for backups & accessing files.
With Internet Sharing enabled, my iPhone can access the web, so I believe I have the sharing set up correctly. However, I can't see the Time Machine and my Airport Express just keeps blinking amber.
Does anyone know what I might need to do to resolve this issue?
Any help is so very very much appreciated!

Thanks Kappy,
I'm not sure you're exactly following me on this one, though. Here's what I've discovered on my own for anyone else facing the same situation I am:
1. You /cannot/ use Airport Express while using Leopard's Internet Sharing.
2. If you want to create a local network, in this situation, you'll need to use Time Capsule to establish the initial local network, then join the Airport Express into that network. At that point you can use Time Machine with Time Capsule, access it as a hard drive and use AirTunes with the Airport Express.
But you cannot use the Sprint AirCard (and I assume any other similar setup) and your Mac with Internet Sharing to build the local network and then join the other devices to it. Unfortunately.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to set up time capsule with existing network that uses airport express/extreme

I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

I suggest to use your airport express to extend your wireless network that is created by your new time capsule

AirTunes using Airport Express - Low sounds level in speakers

Similar Messages

Maybe you are looking for