AirTunes with AE 6.1.1 and Mac OS 10.6.2

I am in China and was unable to make my Airport Express base station work with my PPOE account until a Beijing Apple Store tech explained that AX v6.3 is not compatible with local ADSL service and downgraded the AX firmware to v6.1.1. Now I have wireless internet access but Airtunes is not working. In iTunes I can see the remote speakers listed as an option in a pulldown list but cannot choose them.
Airtunes had worked when I was using AX 6.3 (wireless internet worked in the US but not in China). Airtunes is currently enabled in my Airport Utility settings. I've tried disabling and the re-enabling the setting but that did not work. I've also disabled and re-enabled the "Look for remote speakers connected with iTunes" option in iTunes>Preferences. There is a very strong wireless signal and I've unplugged and replugged my speakers into the AX several times.
I am using a 13" MacBook Pro, running OS 10.6.2, purchased last week in the US.
What can I do to make Airtunes work? Thank you for your help!

Yes, 6.0 is an update for 3.6.1. The 3.6.x versions were followed by 4.0 in March 2011, then 5.0 in June which was an update for 4.0, and 6.0 an update for 5.0 in August.
Mozilla moved Firefox to a fast release system this past spring, quicker releases with fewer changes per release. Instead of users having to wait for a new feature to be added in 10 to 14 months under the old release system, a new feature is added to a release like 12 weeks after the new feature is deemed to be complete and ready for release.

Similar Messages

Using Logic 7.2 on a Mac Pro with Protools 7.2.1 and Mac OS 10.4.7

I am researching purchasing a New Protools/Logic System
Seems the version of Protools to use with the new Mac Pros is 7.2.1, which only recently came out to work with the new "Mac Pros" Digidesign has stated thhat it works with and Mac OS 10.4.7
The latest version of Logic is 7.2 which has been out for a while....hmmm
Is anybody using Logic 7.2 on a New Mac Pro with Protools 7.2.1 and Mac OS 10.4.7, and does it work?

Logic Pro 7.2.2 is not compatible with DAE/TDM on a Mac Pro INTEL.
You will see only "CoreAudio" as available choice, when trying to engage your audio hardware.
We have to wait for any announcements in this regard, maybe at AES or DigiDays in San Francisco.
Best,
21th

Adobe updater is crashing with adobe photoshop elements 6 and mac os version 10.9.4 (on a brand new install) . How to overcome this ?

adobe updater is crashing with adobe photoshop elements 6 and mac os version 10.9.4 (on a brand new install) . How to overcome this ?

Maybe I typed it wrong ...it is unchecked.
This is the message I receive:
Process:         Adobe Updater
Path:            /Applications/Utilities/Adobe Utilities.localized/*/Adobe Updater.app/Contents/MacOS/Adobe Updater
Identifier:      "com.Adobe.ESD.AdobeUpdaterApplication"
Version:         Adobe Updater 5.1.0.1082 (5.1.0.1082)
Code Type:       X86 (Native)
Parent Process: launchd
Responsible:     Adobe Updater
User ID:         501
Date/Time:       2014-11-21 12:39:47.691 -0600
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 42CCAEE7-C520-BA70-4B27-711A184AB1A5
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
terminating with uncaught exception of type std::runtime_error: Unable to determine registration filepath!
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib        0x93982952 __pthread_kill + 10
1   libsystem_pthread.dylib       0x96f15167 pthread_kill + 101
2   libsystem_c.dylib             0x940f029c abort + 155
3   libc++abi.dylib               0x99fe06c9 abort_message + 169
4   libc++abi.dylib               0x9a00147d default_terminate_handler() + 264
5   libc++abi.dylib               0x99ffec30 std::__terminate(void (*)()) + 14
6   libc++abi.dylib               0x99ffe64b __cxa_throw + 116
7   "com.Adobe.ESD.AdobeUpdaterApplication"0x0004e4a3 0x1000 + 316579
8   "com.Adobe.ESD.AdobeUpdaterApplication"0x00056f19 0x1000 + 352025
9   "com.Adobe.ESD.AdobeUpdaterApplication"0x00024499 0x1000 + 144537
10 "com.Adobe.ESD.AdobeUpdaterApplication"0x000139c0 0x1000 + 76224
11 "com.Adobe.ESD.AdobeUpdaterApplication"0x00002912 0x1000 + 6418
12 "com.Adobe.ESD.AdobeUpdaterApplication"0x0000282d 0x1000 + 6189
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib        0x93983992 kevent64 + 10
1   libdispatch.dylib             0x96f1e899 dispatchmgr_invoke + 238
2   libdispatch.dylib             0x96f1e532 dispatchmgr_thread + 52
Thread 2:
0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
Thread 3:
0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
Thread 4:
0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xa10e2c0c ecx: 0xbffff0dc edx: 0x93982952
edi: 0xa13a31a8 esi: 0x00000006 ebp: 0xbffff0f8 esp: 0xbffff0dc
   ss: 0x00000023 efl: 0x00000206 eip: 0x93982952   cs: 0x0000000b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x99fe3e46
Logical CPU:     0
Error Code:      0x00080148
Trap Number:     132
Binary Images:
    0x1000 -   0x24cff7 +"com.Adobe.ESD.AdobeUpdaterApplication" (Adobe Updater 5.1.0.1082 - 5.1.0.1082) <3D59867C-5698-4D46-AD1F-C357C48B75AA> /Applications/Utilities/Adobe Utilities.localized/*/Adobe Updater.app/Contents/MacOS/Adobe Updater
0x3ce000 -   0x3d9fff com.apple.CommerceCore (1.0 - 42) <D28DD970-4B69-3848-9BCC-3C67323B3D9C> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/CommerceCor e.framework/Versions/A/CommerceCore
0x493f000 - 0x4964ff9 com.apple.framework.familycontrols (4.1 - 410) <A33A97EE-C735-38BA-9B49-5D78DAA3DEDA> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyControls
0x8fea6000 - 0x8fed8417 dyld (239.4) <0F2176BD-4239-3506-BA41-3B885269520E> /usr/lib/dyld
0x90008000 - 0x90023ff5 com.apple.openscripting (1.4 - 157) <5C161A52-8D2F-3D56-A988-05727BED7A59> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework /Versions/A/OpenScripting
0x90024000 - 0x90025fff liblangid.dylib (117) <F18F76C6-7E4B-34AD-AE81-C1C031BF2F7D> /usr/lib/liblangid.dylib
0x90026000 - 0x90109ff7 libcrypto.0.9.8.dylib (52) <D3AB1D26-30BA-36D3-956C-EC7D7185C396> /usr/lib/libcrypto.0.9.8.dylib
0x9010a000 - 0x90135ff7 libsystem_network.dylib (241.3) <71EBA489-386D-3608-ADE6-CB50EBD1AB1B> /usr/lib/system/libsystem_network.dylib
0x90136000 - 0x9052effb com.apple.CoreGraphics (1.600.0 - 599.35.4) <2B46D887-CAED-30F3-B009-1EBF0C71DC2E> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x9069c000 - 0x906a5fff com.apple.audio.SoundManager (4.1 - 4.1) <68B7CEB7-AF09-3E24-8548-6ABF065B5186> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/V ersions/A/CarbonSound
...and it goes on and on.
Joy (Awbrey) Schichtl
[email protected]

Problem with Xsan 2.1.1 and Mac Os server 10.5.6

Hi,
We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
- We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
- We have some problems, one of them is:
odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
- Another problem is with AFP service, suddenly the service stop, and the error is :
mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
-What of the meaning of (ipc/send) invalid port right??.
And the last error is:
-com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
Need Help please!.

My configuration:
- Master Directory:
Hardware Configuration:
Model: Xserve
Processor: 2x2,8 Ghz Quad-Core Intel Xeon
Memory 8 Gb
Disk: 70,04 Tb
Software:
Kernel Version: 9.6.0
System Version: Mac OS X Server 10.5.6
Xsan 2.1.1
Services: AFP, DNS, Open Directory RADIUS
Status: connected Users: 37
This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

Photoshop CS3 with Epson Stylus Photo 1400 and Mac Leopard

I have Adobe Photoshop CS3 and an Epson Stylus PHOTO 1400 printer and Mac OS X 10.5.4.
When I print a photo it comes out with excessive ink which smears very easily and has lines in it. It only does it in Photoshop. When I print from any other program it comes out fine. I've seen reviews online where people have printed from Macs and photoshop onto the printer and it worked. I've already contacted Epson, but they said to contact Adobe. Does anybody have any advice?

Forget Epson's useless tech support.
What you describe is typical of improper printer profile or usage of non-Epson paper, especially paper with gloss. Have you profiled the printer/paper and are you using Epson paper (or other paper and profiles specifically recommended here for Epson photo-quality printers) properly selected?
Like Ramón I am on 10.4.11, not 10.5.x, but I doubt if your described problem is due to the OS version.

Any help with a Time Capsule install and Mac Mini server screen share?

Installed a Time Capsule, now I can't access my mac mini server. I see the files/folders, but cannot screen share with the mini from my macbook pro. Any help? Error below when trying to use the "screen share" button in Finder. Macbook Pro and Mac Mini are using Mountain Lion 10.8.2.
Connection Failed Error: Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure your network connection is working properly.
Please help, I'm really stuck on this one!

Try removing the TC and see if the problem disappears.
Screen Sharing has a checkered histroy looking back through the posts..
https://discussions.apple.com/message/16026896#16026896
There are many discussions about failing after changes in Lion.. I haven't seen the equivalent ML yet.. the TC may not be root cause, just the initiator of the problem.
It could be the BTMM associated with the TC.
https://discussions.apple.com/thread/4160415?start=0&tstart=0

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

ICal won't sync with iCal from other computer and .Mac

I am trying to snyc my ical on my desktop with the ical on my laptop. I use my ical on my laptop most often so its data is most upto date, but I would like to have it so that no matter which one I look at its the same, and if I change something on one it will update on both.
I thought that is what would happen with .Mac and syncing. But when I try to sync my desktop it says that it won't sync the calander because of inconsist data, but it won't tell me what they are.
It says to confirm that your computer's data is valid, (its not, but how do I confirm or not?). Then it says to reset calendars on .Mac in the system preferences when I try to do that it gives me an icon of computer and .mac, and an arrow saying in what direction I'm assuming data will go. I choose .mac, to computer and it still comes up with the same problem.
So how do I fix? Once I fix will it merge data on both or will it always be thinking take the .mac data and replace it? It scares me when it says are you sure you want to do this and its changable if you do. I don't want to loose the data on my laptops calander.
Is there a way to clear my desktop ical, and then sync it and get my laptop's data and start from scratch? And then do mutual merges after that?
It says to check that my info on the computer is correct and then to reset it in .mac preferences. The data on the desktop isn't correct but even if I reset, it won't

I'm having massive problems with syncing via .mac with two local Macs - nothing I have tried has worked as yet and it's currently under investigation with a .mac specialist.
I did used to get the 'inconsistent data' warning but that has somehow disappeared - now I don't get any warnings and .mac says both Macs are synced but I get nothing updated to iCal from either direction...
So I don't as yet have an answer but just to let you know that if you get in touch with Apple they will support you with finding an answer.
In the meantime have a look at these links for more self-help:
http://arstechnica.com/journals/apple.ars/2008/02/25/how-to-truly-reset-your-mac -sync-data
Note that iSync also plays a large part, not just .mac and iCal - you need to 'reset sync data' in iSync/preferences.
Plus some of the help stuff that Apple sent me:
You may need to reset sync data again on .Mac and on all of the computers with which you are syncing.
First, it's important to back up any data that you wish to keep. For more information, please see:
How to back up and restore your important Mac OS X 10.4 files (applies to 10.5 too)
http://www.info.apple.com/kbnum/n301239
Mac OS X 10.5: When to use Time Machine or .Mac Backup to back up data
http://www.info.apple.com/kbnum/n307050
Before proceeding, you may find it helpful to print this email and the above articles so that you can consult them during this process.
Next, using a computer that has Mac OS X v10.5 or later, unregister the other computers, including any Mac OS X v10.4 computers you may be using. (To find out which version of Mac OS X is installed, choose About This Mac from the Apple menu.)
Here's how to unregister the other computers from the computer that has Mac OS X v10.5 or later:
1) Open System Preferences and click .Mac.
2) Click Sync, then click the Advanced button.
3) Click once on one of the computers in the list and click Unregister. Follow the onscreen instructions to unregister the computer. Repeat this step until all registered computers are removed from the list.
4) When the last computer has been unregistered, you will be asked "Would you like to delete unused sync info from .Mac?" Select the boxes next to each of the data types listed and click Delete.
5) Restart the computer.
After unregistering the other computers, sync your data from the computer that has the most up-to-date information.
To add a computer with Mac OS X v10.5 or later to the .Mac sync list:
1) Open that computer's System Preferences and click .Mac.
2) Click the Sync tab.
3) Select "Synchronize with .Mac."
4) Select the data types you wish to sync. Click Sync Now.
5) If you are asked, "What would you like to do for this first sync?", select "Merge" and click Sync. You may have to do this for each data type that you are syncing.
After you have performed the initial sync, you should try syncing again. If you do not receive any errors, you can add additional computers to the .Mac sync list by following these steps on each of the computers:
1) Open that computer's System Preferences and click .Mac.
2) Click the Sync tab.
3) Select "Synchronize with .Mac."
4) Select the data types you wish to sync. Click Sync Now.
5) If you are asked, "What would you like to do for this first sync?", select "Replace data on this computer" and click Sync. You may have to do this for each data type that you are syncing. This will replace the data on the computer with the data that has been synced to .Mac.
I recommend that you add the computers one at a time, confirming each time that syncing is working correctly. To confirm that syncing is working, make a change in one of the data types you are syncing, then perform a sync from the first computer. When that syncing is finished, perform a sync on the second. If syncing is successful, add a third computer, and so on.
Good luck!
Message was edited by: AnngryofMayfair

Photosmart D110a Wireless Troubleshooting with D-Link DIR-655 and Mac OSX 10.8

Good evening all,
Apologizes if this has already been posted. I've googled this issue a couple of times, but I still haven't found a solution for this problem.
I have the Photosmart D110a and I'm running Mac OSX Mountain Lion, and my router is a D-Link DIR-655 and my security is WPA-Personal and the router is running in 802.11gn mode. My ISP is Optimum Online.
The issue that I've been having is that the printer works wireless when everything has been recently booted up. As does the scanner. However, if it hasnt been used for a while, the printer shows up in the OSX Print & Scan settings page as idle, but when I try to print, the dialog just says "looking for printer" and never finds it, and just says "The printer is not connected" under the item in the OSX Print Queue. Because of this, I have to restart the computer or restart the printer for them to find each other again.
I've seen other solutions on here, such as giving the printer a static IP address, and this hasn't worked either. The printer is still accessible with the static IP address, which means it's still got a connection to my network, but for some reason the OS isn't recognizing it or something.
It's obvious that the printer works when everything is freshly rebooted, but I still haven't been able to figure out this issue once it's been idle for a while.
Any help would be greatly appreciated!!
Errold

Hi,
Try following my post below, I believe it might be relevant as the router drops the Bonjour connection:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/losing-connection-to-airprint-a-few-min...
I would also suggest updating your router's firmware and check if that may help:
http://www.dlink.com/us/en/support/product/dir-655-wireless-n-gigabit-router
For any help with this proccess I would highly recommend contacting Dlink support.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Is anyone having difficulties with the new yahoo mail and mac 10.8.5?

I am using an older intel based imac desktop...it is updated to 10.8.5 I use Safari to browse. I use Yahoo for my email. I know...don't say it. Please. LOL
Anyway, it seems that Yahoo has changed their email system (again) and I am having all types of difficulties. For starters it keeps asking to I want to expand or collapse all. The icon or whatever it is called these days stays right there on my inbox and blocks me from getting to the email that is beneath it. When I try to forward and delete the sender's name, it deletes the entire email. Is anyone else having these difficulties?
Thank you
Paul

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Mac Pro with Second HD for Win and Mac

Hello Everyone,
I just purchased a new Mac Pro 3.2 Ghz. I have two 500 GB HDs. One is partitioned for Mac OS X and Windows Vista 64. The second HD I want to use as storage for both Mac OS X and Windows and be able to share files. Everyone I talked to says I should format to FAT 32, but there are file size limitations with that format. Is there any way to get the second HD to NTFS format and so that Mac OS X and Windows can read and write to it. Also it would be great if there is a way to unlock my Windows partition on the Mac side so I can write to it. Also are there any good solutions for backing up files using an external RAID with large file formats such as a 1TB or more. If there is anyone who has a similar set up I would welcome any suggestions.
Thanks,
jh3d

I bought Paragon-Software NTFS 6.5 driver to write to NTFS from OS X.
http://www.paragon-software.com/
You can use the convert command in Vista, or just delete the FAT partition and create NTFS.
RAID is a common, popular topic and mbean has lots and lots of great replies, or check out AMUG reviews and also Rob_Art's Barefeats.
http://www.amug.org/amug-web/html/amug/reviews/reviews.html
(down right now)
http://www.barefeats.com/
I use DataBackup PC from Prosoft Engineering in Vista (makers of Data Rescue II) along with Vista Ultimate's backup PC and files feature to FW and Sonnet Tempo E4P.
http://www.prosoftengineering.com/index.php
http://www.sonnettech.com/product/temposatae4p.html
http://www.tomshardware.com/reviews/hitachi-western-digital-terabyte,2017-13.htm l
http://eshop.macsales.com/item/Western%20Digital/WD1001FALS/
Cheap, fast, little 640GB drive:
http://www.barefeats.com/harper14.html
http://eshop.macsales.com/item/Western%20Digital/WD6400AAKS/

HT204291 I can connect to the apple TV but I am not getting display only sound with my IMAC mid 2011 and MAC Air 2012 both with Mountain Lion OS

I just upgraded to Mountain Lion after purchasing Apple TV yesterday from Best Buy.
I have signed in on the same wi-fi network (comcast 30mbps)
I was able to see photos from my wifes Iphone but not my IMac or Mac Air
Both computers connect but I am only getting audio.
I updated software on Apple TV
I shut everything down and reset my router. My Mac Air 13" 2012 was able to see the desk top but not anything that I was doing and then it disconnected.
I also tested the internet speed on the Apple TV but it just told me it was finished. (no results)

WEP as a security measure is laughable nowadays. Even a kindergarten kid with a netbook can crack the password in a few minutes. Try using WPA2 if available on the device. And the Macs will be quite happy connecting with that protocol.

Can't establish a network with Wireless-G Linksys router and Macs

I have a Wireless-G Linksys router and two Macs. My DSL cable is connected to the modem, the modem to the router w/Ethernet cable, and the router to a desktop Mac out of port 1. With this setup, I can usually -- not always -- connect to my wireless network with my PowerBook, but then the desktop Mac cannot connect to the internet. Either Mac connects to the internet when hooked up directly to the DSL modem. I have reset the modem. I have connected to the router's console and everything seems to be in order.The PowerBook can connect to the internet through the wireless router as described above, so there don't seem to be any Mac/PC incompatibility issues at work.My local gurus and my ISP are stumped. Any suggestions?

Then , Connect the MACINTOSH Computer to Port 1 or
Port 2 on the Router.Hope you are Online. Now,
Open a new Internet Browser Page, and in the address bar,
type http://192.168.1.1, press return, And when asked for
Username and Password,
Leave the Username blank and in the Password field,
type admin . This will help you access the Router's
Console. Now, Click the Tab " Wireless " at the top,
Rename the SSID from ' Linksys' to your preferred name.
Save the Settings.
Now, Click the Tab " Wireless " at the top,
Then Click the Sub Tab in the Blue Line ' Wireless Security '
just below the Wireless Tab,
Set the Security Mode to WEP, Default Key as Key 1,
Encryption Mode as ' 64 Bits10 Hex Digits ' ,
Leave the Passphrase blank, Type a 10 digit Key
[ can contain 0-9, A-F ] in WEP Key 1 Field alone,
Copy the Key on a piece of paper for your reference,
Save the Settings. Now, Make your Computer Wireless.
Restart it. Once the Computer has restarted,
Go to " System Preferences",
Click on the Icon , " Network " , Set the Location to " Automatic "
Set the Show Listing as " Airport "
Now, Under the Tab Airport, Set it to
By default Join a Specific Network.
Click the + Button to add a Network
As the Network name, type the same name of the Network
that you have typed on the Router's Console, by
delecting the name Linksys.
As the WEP Password , type a $ symbol followed by the
10 DIGIT Number that have had copied on a piece of Paper.
For Example, if your WEP Key is 0123456789,
you will type it on the MACINTOSH AS
$0123456789
Click Apply Now button Down below.
Now, Click the First Tab " TCP / IP,
Check the IP Address below Configure " Using DHCP " .
If it's in the range, 192.168.1.100
and the Router Id is 192.168.1.1 >>>>>>>>> COOL
Check whether you are Online wirelessly with the Computer
Revert back for assistance,
shriraj - the boss . . .

Firefox (17.0.1) no longer works with Adobe 10.1.4 and MAC OSX 10.7.5 Lion? Online disc. say Adobe 11.0 will not fix? Suggestions?

I can open pdf files in safari, however my office products work more effectively with Firefox. Currently the firefox browser shows a blank screen when I try to launch pdf file within my work program. So I would really like to be able to use firefox as the browser. Is there an update or fix that will work? Although I am currently on Adobe 10.1.4. after reading online discussions it suggests that 11.0 doesn't work either and so I hate to try another update. Everything was working fine with old Adobe version (which I don't know which one that would have been and not sure if and/how to get it back) until last Sunday when my husband decided to update my Adobe without my permission. Can anyone help?

You can disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
PDF files may also be found under another entry like Portable document.

Problems with Remote app on iphone and Mac connection

Hi,
I am using iTunes 10.4.1, and am trying to use the remote app on my iphone to control my itunes with it. I was able to connect previously, before I upgraded to Lion OS, before upgrading to the latest versions of iTunes and my iPhone as well. But now, the connection is just dead.
I tried to re-add my iTunes onto my iphone again, but I couldn't find this box to check in my iTunes under Preferences > Devices -
"Look for iPod touch, iPhone and iPad Remotes"
Someone please advice me?
Thanks.

Chenks wrote:
maybe for you, but isn't for me.
i have the remote app on my iphone4 and it's connected to 2 appletv's.
i don't experience any dropping of connection etc.
May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

AirTunes with AE 6.1.1 and Mac OS 10.6.2

Similar Messages

Maybe you are looking for