Airwatch MDM integration with sccm 2012

I want to integrate Airwatch MDM with SCCM 2012 SP1. I am not able to find out any documentation for the same. Can anybody help me with the said.
Thanks and Regards Deepak

There is an integration between AirWatch and ConfigMgr 2012. I've never used it so I can't comment on it.
https://tool.microsoftsca.com/Partner/?id=737
Watch the video here
http://airwatch.wistia.com/medias/7463a8aae8
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

  • Remote WSUS integration with SCCM 2012

    Hi,
    We are currently having WSUS already in place for Patching , but not used at all its just installed.
    can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
    or I decommission it and install a new WSUS on same server as SCCM server.
    what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
    Thanks in Advance

    When you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
    A couple of notes here though:
    - You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
    Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
    - Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • MDT 2013 Integration with SCCM 2012 R2

    Hi all,
    Can we export the Drivers from MDT & import in into SCCM after the integration of MDT with SCCM.
    We were having MDT 2012 update 1 in our environment & not we have integrated MDT 2013 with SCCM so can we export the drivers from MDT 2012 Deployment share & import it in SCCM 2012 R2.
    Thanks,
    Pranay.

    Not really importing and exporting. Just re-use the content of the drivers and import them in ConfigMgr.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Integration with SCCM 2012?

    Does anyone have any experience in integrating SCCM 2012 with VSM? Any documents or learnings from an asset management standpoint so that the CMDB can be populated?
    Thanks in advance.

    Hi Chris,
    Only the VMware documentation I'm afraid, which isn't at all comprehensive but is enough to get going I think.
    I don't know how familiar you are with integration and the federated cmdb so forgive me if you have all this already, but check out the downloads section (https://my.vmware.com/group/vmware/details?downloadGroup=SM_919_DOC&productId=171&rPId=5685) and look for:
    VMware Service Manager connector for Microsoft SCCM Technical Notes  (VSM_90_Connector_for_SMS_SCCM_TN_v1.0.3.pdf)
    Connector Installation Guide  (vsm-91-connector-guide.pdf)
    Integration Platform Configuration Guide (vsm-91-integration-platform-config-guide.pdf)
    Check those out and if you have any questions, do shout and I'll do my best to help if I can!

  • Is there Java API available for third-party integrations with SCCM 2012? I went through the "Developer's Survival Guide", and it seems that SCCM 2012 SDKs only support C# and PowerShell

    Hi All,<o:p></o:p>
    My team and I are developing a software using java that works closely with IT management software such as SCCM. Our software will be highly dependent on data stored in SCCM. Basically
    our software will talk to SCCM to get information about a system managed by SCCM. To be able to do that, our software needs to use a java API that talks to SCCM. Is there a java API for SCCM 2012 that we can use? If there is not, what is the work around to
    this issue (integrate a java project with SCCM SDKs)? Any help is appreciated! Thanks!<o:p></o:p>

    Hi,
    As you mentioned, it seems that there is no available Java API for SCCM .
    Just curious, what's information you want to get from SCCM.
    Based on my experience, you could query the SCCM site database to get almost all the information.
    Otherwise, your question seems to be related to SCCM 2012. You may also choose to post there to get more effictive help.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Remedy CMDB Integration with SCCM 2012

    We are facing an issue with duplicate entries of Hostname after remedy is integrated with SCCM2012.We have created custom view in SQL database which mapped to remedy database.Below is the query used for the integration.Can I get any help on this?
    SELECT DISTINCT
                          dbo.v_GS_COMPUTER_SYSTEM.Name0, CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('3', '4', '6', '7', '15')
                          THEN 'Desktop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('8', '9', '10', '21') THEN 'Laptop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
    IN ('1')
                          THEN 'VDI' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('2', '17', '23') THEN 'Server' END AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
                          dbo.v_GS_COMPUTER_SYSTEM.Manufacturer0, dbo.v_GS_COMPUTER_SYSTEM.Model0, dbo.v_GS_OPERATING_SYSTEM.Caption0,
                          dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
                          dbo.v_R_System.User_Name0 AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPAddress0,
                          dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0, dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
                          dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00 AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
                          dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW, dbo.v_R_System.Last_Logon_Timestamp0, dbo.v_GS_COMPUTER_SYSTEM.Domain0
    FROM         dbo.v_GS_PC_BIOS INNER JOIN
                          dbo.v_GS_COMPUTER_SYSTEM ON dbo.v_GS_PC_BIOS.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
                          dbo.v_GS_NETWORK_ADAPTER_CONFIGUR ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.ResourceID INNER JOIN
                          dbo.v_GS_OPERATING_SYSTEM ON dbo.v_GS_OPERATING_SYSTEM.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
                          dbo.v_R_System ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_R_System.ResourceID LEFT OUTER JOIN
                          dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP ON
                          dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID INNER JOIN
                          dbo.v_GS_SYSTEM_ENCLOSURE ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID INNER JOIN
                          dbo.v_GS_X86_PC_MEMORY on  (dbo.v_gs_x86_pc_memory.ResourceID = .v_GS_COMPUTER_SYSTEM.ResourceID) inner JOIN
                          dbo.Processor_DATA ON dbo.Processor_DATA.MachineID = dbo.v_R_System.ResourceID INNER JOIN
                          dbo.CH_ClientSummary ON dbo.CH_ClientSummary.MachineID = dbo.v_R_System.ResourceID
    WHERE     (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPEnabled0 = 1) AND (NOT (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0 IS NULL)) AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0 >=512)
    Thanks,
    Shijil

    Thank you Nash for your help.
    I tried with dbo.v_R_System_Valid  as suggested, still the same result.Is there any way to filter duplicate computer name in this query?
    Below is the query.
    SELECT
    DISTINCT
    dbo.v_R_System_Valid.Netbios_Name0,
    CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
    IN ('3',
    '4',
    '6', '7',
    '15')
    THEN 'Desktop'
    WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
    IN ('8',
    '9',
    '10', '21')
    THEN 'Laptop'
    WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
    IN ('1')
    THEN 'VDI'
    WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
    IN ('2',
    '17',
    '23') THEN
    'Server' END
    AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
    dbo.v_GS_OPERATING_SYSTEM.Caption0,
    dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
    dbo.v_R_System.User_Name0
    AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPAddress0,
    dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0,
    dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
    dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00
    AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
    dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW,
    dbo.v_R_System.Last_Logon_Timestamp0
    from 
    dbo.v_GS_PC_BIOS
    inner JOIN
    dbo.v_R_System_Valid
    ON dbo.v_GS_PC_BIOS.ResourceID
    = dbo.v_R_System_Valid.ResourceID
    INNER JOIN
    dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION
    ON dbo.v_R_System_Valid.ResourceID
    = dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.ResourceID
    INNER JOIN
    dbo.v_GS_OPERATING_SYSTEM
    ON dbo.v_GS_OPERATING_SYSTEM.ResourceID
    = dbo.v_R_System_Valid.ResourceID
    INNER JOIN
    dbo.v_R_System ON dbo.v_R_System_Valid.ResourceID
    = dbo.v_R_System.ResourceID
    LEFT outer
    JOIN
    dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP
    ON
    dbo.v_R_System_Valid.ResourceID
    = dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID
    INNER JOIN
    dbo.v_GS_SYSTEM_ENCLOSURE
    ON dbo.v_R_System_Valid.ResourceID
    = dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID
    INNER JOIN
    dbo.v_GS_X86_PC_MEMORY
    on  (dbo.v_gs_x86_pc_memory.ResourceID
    = .v_R_System_Valid.ResourceID)
    inner JOIN
    dbo.Processor_DATA
    ON dbo.Processor_DATA.MachineID
    = dbo.v_R_System.ResourceID
    inner JOIN
    dbo.CH_ClientSummary
    ON dbo.CH_ClientSummary.MachineID
    = dbo.v_R_System.ResourceID
    WHERE    
    (dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPEnabled0
    = 1)
    AND (NOT
    (dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0
    IS NULL))
    AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0
    >=512)
    Thanks,
    Shijil

  • MBAM 2.5 integrated with SCCM 2012 SP1 compliance issue

    Hi,
    I have installed MBAM 2.5 in a SCCM integrated topology. GPO for encryption on the OS drive only have been deployed and encryption completed using the MBAM client. When running the compliance report and evaluating using the SCCM client the compliance comes
    back as non-compliant. I have tried several tweaks to the GPO but had no luck getting it to report as compliant. Using the dashboard report to try and pin point why it is non-compliant shows as non-compliant but using the reasons in the top right corner all
    have 0 instances.
    Is there a log file on the local system that can tell me what aspect is causing the status?

    In the Event Viewer, there is MBAM node, you will find all MBAM client events there.
    Also, review your GPO and see what encryption types are allowed and which are required. Maybe one reason would be, that your GPO requires something, which your client hasn´t done yet, like PIN code.
    I´ve seen issues with not being compliant to policy before, and there was some explanations of this, if you google around. I´m also intrested to get knowing this, because I couldn´t solve this compliance issue.
    For customer reporting, I just did query in SCCM where I listed ecrypted status and drive letters, that was a "customized report method" to tell customer, are all their Computers encrypted or not.

  • Intel vPro AMT integration with SCCM 2012R2 - Issues with SCCM finding the "ConfigMgr AMT Web Server Certificate"

    Good evening all,
    I'm attempting to get Intel SCS integrated with SCCM 2012 R2 and I have both sides working, doing what they do best, however, I have issues when I try to mate the two. I started with a single server for the site and then tackled the Intel side with success,
    then I added another site server to run the Out of Band service point and Enrollment point. Up until this point I've had no issues with certificate templates, or issuance of those certs. 
    I have re-read the TechNet documents a few times regarding the PKI setup, some Intel documentation and three step by step articles and non of them seem to differ so I can't understand why I'm unable to choose my "ConfigMgr AMT Web Server Certificate"
    when configuring the Out of Band Management Component Properties page.  The "AMT web server certificate template:" dialog shows my CA FQDN and CA name, but the certificate template list is always blank.  I've tried this from both the remote
    and local ConfigMgr consoles.  The site servers have rights on the CA to manage and issue certs, is there something I'm missing that isn't in the documentation or buried somewhere that I missed?  Is there a Application policy that should be on the
    cert that isn't mentioned anywhere?
    Thanks in advance!
    Tesfaye

    Hi Joyce,
    Thanks for responding.  I pretty much have this error repeating in the log file and not much else:
    [28, PID:13388][05/21/2014 15:17:15] :System.DirectoryServices.DirectoryServicesCOMException\r\nThere is no such object on the server.
       at System.DirectoryServices.DirectoryEntry.Bind()
       at System.DirectoryServices.DirectoryEntry.get_AdsObject()
       at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
       at System.DirectoryServices.DirectorySearcher.FindAll()
       at Microsoft.ConfigurationManagement.AdminConsole.Common.ADUtils.EnumEnterpriseCACertificateTemplates(String domainEntryName, String certAuthorityFqdn, Boolean isServerAuthen)\r\n
    I will look into this, but another hint would be greatly appreciated!
    Thanks,
    Tesfaye

  • Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

    Hi. Sorry if the answer is obvious, but I need to ask...
    Will SCOM 2012 R2 coexist with SCCM 2012 SP1?
    We currently have SCOM 2007 R2 installed and we'd like to upgrade.
    We installed SCCM 2012 close to 2 years ago and upgraded to SP1 last summer.
    We had SCOM 2007 R2 integrated with SCVMM 2008 R2, but have upgraded to SCVMM 2012 SP1 recently - so there is nothing setup between SCOM and SCVMM.
    There is currently nothing setup between SCOM and SCCM.
    We're a single forest, single domain shop.  Ideally, we'd like or System Center products to "work together", thus the question about the 2012 SP1 and R2 mix.
    Thanks for any input.  I appreciate your time and expertize.  Joe.

    Hi,
    I concur with Alexey, a side note SCCM and SCOM do not use the same SQL Server.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Deploying CC Enterprise Applications With SCCM 2012

    Hi all,
    We are using CC Packager to package up individual applications (Photoshop, InDesign etc) and are having trouble deploying the applications once packaged. To deploy, we are using SCCM 2012 and are deploying to Windows 7 x64 clients. It appears that the install begins on the client, then hangs, never to finish.
    We are running the MSI with the REBOOT=ReallySuppress and MSIRESTARTMANAGERCONTROL=Disable commands, but with no luck.
    This has us really stumped. The applications seem to package fine, yet just won't install. If we manually run the installer, we can see it begin installing, then the progress bar goes backwards and the installation ends without displaying any sort of message.
    Also, as an FYI, we have followed this guide closely in our attempts: http://helpx.adobe.com/creative-cloud/packager/deploying-packages-sccm.html
    Has anyone experienced a similar problem? Any ideas?
    Thank you in advance.
    Ryan

    Windows 7 x64 Clients
    Deploying with SCCM 2012
    I have called Adobe before and was told that the application package needs to be on a local drive on the computer. The package cannot be installed if the package is sitting on the network. My installation for a adobe creative cloud  package fails to install when I try to install the application from the software center. At some moment the installation searches to ensure it is on a local disk. Not sure how this happends. If you place the installation package on a drive on your computer the package will install, although it will take time depending on how many applications you have packaged.
    Another problem that you might have is having users log out of the applications without admin previlages.
    I have yet to find a solution for these two problems, I could really use some help from someone who has sucessfully deployed a creative cloud package to a user.
    Thank you

  • Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

    Hi,
    Trying use "User-Driven Installation"  with
    SCCM 2012
    R2 CU4 and MDT
    2013 Update 1 for deploy Windows
    10.
    Created MDT Task Sequences with
    template "Client Task sequence"
    and Deployment Method "User-Driven Installation".
    When I try to deploy I have error like:
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Part smsts.log
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
    [ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the action: Error in the task sequence.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
    The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

    MDT Updates for Windows 10 Technical Preview Build 10041
    Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
    http://zalozny.com.ua

  • AMT 3.2.10 Clients with SCCM 2012 on Windows 2012

    Hey
    I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x upwards)
    is successful, so I can rule out all the usual suspects like the provisioning certificate from GoDaddy, our internal CA, DHCP options, etc. Provisioning with SCCM 2007 of both 3.2.x and 5.x AMT devices is also still successful. 
    The amtopmgr.log repeatedly shows the following entries:
    Provision target is indicated with SMS resource id. (MachineId = 16777325 WS45.mydomain.ch)
    Found valid basic machine property for machine id = 16777325.
    Warning: Currently we don't support mutual auth. Change to TLS server auth mode.
    The provision mode for device WS45.mydomain.ch is 1.
    The IP addresses of the host WS45.mydomain.ch are x.x.x.x.
    Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4.
    Attempting to establish connection with target device using SOAP.
    Create provisionHelper with (Hash: 74B7792EDBD64EBB01E2E3A0B27FAFA04C2D3BCB)
    Set credential on provisionHelper...
    Try to use provisioning account to connect target machine WS45.mydomain.ch...
    Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
    **** Error 0x37f2b370 returned by ApplyControlToken
    Fail to connect and get core version of machine WS45.mydomain.ch using provisioning account #0.
    Try to use default factory account to connect target machine WS45.mydomain.ch...
    Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
    **** Error 0x37f2b370 returned by ApplyControlToken
    Fail to connect and get core version of machine WS45.mydomain.ch using default factory account.
    Try to use provisioned account (random generated password) to connect target machine WS45.mydomain.ch...
    Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
    **** Error 0x37f2b370 returned by ApplyControlToken
    Fail to connect and get core version of machine WS45.mydomain.ch using provisioned account (random generated password).
    Error: Device internal error. This may be caused by: 1. blabla...
    Error: Can NOT establish connection with target device. (MachineId = 16777325)
    After some investigation with Wireshark, I've found out that SCCM tries connect with TLSv1 to the AMT device. The response from the device is immediately an SSL alert (internal error). Using OpenSSL, I could connect to the device if I explicitly told it
    to use SSLv3. This leads me to believe that the 3.2.x firmware cannot handle TLSv1 correctly and SCCM never tries to connect with SSLv3 after a failure.
    So the question is: How can I get SCCM 2012 to provision these devices?
    Regards,
    Ingo
    [1]
    http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigOOB

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens.

    Hi,
    I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens. The reason you dont need to repackage\test the application on an client OS...
    I don't agree and I have not Heard this Before, just that you use TS for some scenario.
    Or is it more likely that "Terminal Services(RDS)", take over the applikation administration?
    /SaiTech

    Surely this all depends on your environment. There's nothing wrong with creating RemoteApps to push to client devices. Maybe you have an environment where RDS is widely used. 
    Why not leverage both solutions and target App-V's at RDS servers and then create App-V based RemoteApps that users can run at home as part of a home working solution via RDWeb.
    Creating apps via RDS will be an admin overhead yes but then so is creating App-V packages in SCCM.
    I don't agree with the arguement re: 'you dont need to repackage\test the application on an client OS...' as
    App-V allows you to run on multple O/S types. 
    To be honest both technologies have their pros and cons. 
    Cheers
    Paul | sccmentor.wordpress.com

  • How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

    Hi,
    how to find using SCCM SQL query,  application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

    Thanks, is it not possible via any script also?
    Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • The problem with forecast reports in SCOM 2012 after integration with VMM 2012

    Hello.
    I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
    could not be shown”. I find only errors in SQL Server Reporting logs like this:
    library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
    processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
    запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
    the target of an invocation..
    Query (5, 58) Parser: The syntax for '6' is incorrect.
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
    AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
       at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
       --- End of inner exception stack trace ---;
    The Russian string “Не удалось
    выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
    I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
    SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
    SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
    I think the problem in regional settings. By my opinion there are two possible mistakes:
    SQL collation  for all SQL DB instances. May be need use “Latin1_General_CI_AS”
    as provided by
    http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
    Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

    Error: Subreport could not be shown
    Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
    Background
    There are two possible reasons for this error:
    1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
    2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
    Solution
    To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
    If the reporting server is pointing to a wrong location, the report displays an error similar to the following: 
    Error message
    An error has occurred during report processing.
    Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
    To verify the correct SQL Server computer and instance path
    In Report Manager, navigate to the report generating the error and click the Properties tab.
    Click Data Sources and under a Shared data source, note the path.
    Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
    If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
    Click SCDW.
    In the Connection type list, ensure that Microsoft SQL Server is selected.
    In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
    Note:
    A period (.) denotes the local computer.
    If the account has insufficient permissions, the report displays an error similar to the following: 
    Error message
    An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
    schema 'dbo'.
    To determine if you are experiencing the SQL Server permissions issue
    Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
    If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
    Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
    Click DashboardComputersTrend.
    If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
    To grant permissions to the SQL Server computer
    1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
    2. On the server with the System Center Reporting database, start SQL Server Management Studio.
    3. In the tree, expand Security, and then expand Logins. Do one of the following:
    If the user account is listed, right-click the account, click Properties, and then go to step 5.
    If the user account is not listed, right-click Logins and choose New Login.
    4. In the Login name box, enter the user account (domain\username).
    5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
    6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
    Thanks,
    Yog Li
    TechNet Community Support

Maybe you are looking for