Aiwa manual model CX-NA767U
I understand that Sony supports Aiwa products. I acquired an old Aiwa stereo system, and I need the manual. The model is #CX-NA767U.
The Aiwa.com website is dead. Can you point me in the right direction for a manual?
Thanks in advance.
Solved!
Go to Solution.
Hi MissMissy!
Please check the link below.
https://docs.sony.com/release/CXNA767.pdf
Hope this helps!
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K
Similar Messages
-
Forecasting Models in Demand Planning.
Hi experts,
want to know in details and also to practice various forecasting models in Demand Planning, from beginning.
please suggest.
Regards
BhupendraHi Bhupendra,
There are various forecasting models to use in business like automatic model and manual model as a broad category.
In detailed, there are models like constant model, trend model, season models, trend seasonal etc.,
Forecasting models are very simple and mostly based on STATISTICAL TECHNIQUES. If you have sound knowledge in various statistical methodologies, it will be very easy to followup all the models.
Moreover, while selecting the best model for an organisation, one needs to study and identify the key performance indicators for improvement and accordingly the forecast model needs to be aligned.
The method to find this kind of model is the BEST FIT METHOD (it could be one or more or combo of it).
In demo systems or sandbox system, you can populate various data with various models and try to analyse the one which satisfies business requirements. You can also take the help of BUSINESS PLANNING ANALYSER to build the customised forecasting model which can be part of business side or from consulting side.
Regards
R. Senthil Mareeswaran. -
Forecast base planning (Seasonal Model)
Dear All,
We are trying to implement the forecast based planning with the manual model selection as SEASONAL , here i did the basic required settings like
Maintained the MRP type as VV (Forecast base planning), then forecast views are maintained for the material.
Hist. periods 12 Forecast periods 2 Periods per season 12
Historical value defined as
04.2009 0 1,000
03.2009 0 1,800
02.2009 0 1,200
01.2009 0 1,000
12.2008 0 800
11.2008 0 200
10.2008 0 100
09.2008 0 500
08.2008 0 2,500
07.2008 0 6,500
06.2008 0 3,500
05.2008 0 2,500
Control data
Initialization X Tracking limit 4.000
Model selection Selection procedure 1
Optimization level F Weighting group
Alpha factor 0.20 Beta factor
Gamma factor 0.40 Delta factor 0.30
Forecast value as below
Basic value 1800.000 Trend value
MAD Error total
Period Orig. HV Corr. HV Ex-post FV Orig. FV Corr. FV Season F C
M 05.2009 2500 2500 1.39
M 06.2009 3500 3500 1.94
Can any one explain how this basic value and seasonal index calculated
I know very well it has derived the values with some formulas, if i am correct it has used this formulas
http://help.sap.com/saphelp_erp60/helpdata/en/7d/c2821c454011d182b40000e829fbfe/frameset.htm
can any one explain in detail how it is calculating
Have any one come across this requirement, please let me know issue is vital.
Thanks in advance
Regards,
GaneshRead this, you will find the calcualtions. Enjoy.
[http://help.sap.com/saphelp_47x200/helpdata/en/51/a0d53437a05b2ee10000009b38f83b/frameset.htm] -
i have an older flip phone (CDM8945 DIG ) and somehow it is locked for outgoing calls? how can i unlock it? lost the original manuel. thanks,
LOCK
Locks your phone and prevents unauthorized use.
Phone can only be used after inputting the password.
1. To lock the phone, press and hold
2. To unlock the phone, press (phone button)
then input the password.
Lock feature will deactivate when the phone is
powered off. Upon next power up, you will need to
press
to lock phone again.
The default password is the last 4 digits of your
phone number
See this link for text with pictures of buttons included:
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html?page=16#manual
Here is a link to the whole manual (model 8940 but close enough)
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html -
i know its a audigy 4 something but is there a way i can tell exactly is it OEM, PRO, SE
on the card, just above a white socket (not describred in my manual)
model SB060
on the chip
E-MU
CA0300-IAF LF
creative tech 03 05
58a2kyw
thanks.http://dmzweb4.europe.creative.com/wwenglish/general/Products_List_Audio.htm
jutapa -
Can't Find my T61 Warranty on Lenovo Site
I just bought a new, sealed T61 and went to Lenovo's warranty link to try and find the warranty status. Neither the Auto Detect nor the manual model/serial number entry features work for my machine! Has anyone else experienced this? I'm new so I may have missed something.
Thanks and please help!
VinceHi Kirk,
Thank you for that link. I was already at that site, and what I can't figure out is when you click on Printer Driver, it folds out to get a bunch of info, but no download. Below that is a Scanner Driver which has a download button. Does that have the Printer Driver in it? Also I was on the phone with Epson Tech for quite some time yesterday and they had my trash my driver and when it didn't reappear on restarting they said I had to get the driver from Apple, but Apple has a number of Epson Drivers, but the specific one for NX420 -
Hi,
I've developed a webapp app + ejbs which I have successfully deployed on oc4j standalone as an ear. How do I deploy this on 10gAS? I have tried just copying my oc4j standalone deployment process, (ie modify <1OgAS_HOME>\<OC4J-HOME>\config\server.xml, <1OgAS_HOME>\<OC4J-HOME>\config\http-web-site.xml and dropping the ear into
<1OgAS_HOME>\<OC4J-HOME>\config\j2ee\home\applications
I can see the j2ee app in the 10gAS admin screen but I can't access webapp itself. How should I be doing this?Hi Mike --
To deploy to OracleAS (as opposed to OC4J standalone) you should really use the Enterprise Manager Console, or the command line interface, dcmctl.
EM lets you deploy directly from a browser.
dcmctl lets you deploy from the command line.
If you do want to perform this manual model of deployment (modifying the config files) then you'll need to make some modifications to your process.
1. modify server.xml as normal.
2. modify default-web-site.xml instead of http-web-site.xml.
3. edit the Apache/Apache/conf/mod_oc4j.conf file to expose the oc4j mount point(s) for your web modules in the app
4. run the dcmctl updateconfig command to force the repository pick up the config changes you made.
Since you need to use dcmctl anyway to update the repository, then you may as well use it to do the deployment of the application and have it take care of all of these steps for you
dcmctl deployApplication -file theEAR.ear -a myapp -co homecheers
-steve- -
Hi sony
I want to know how to enable ISO 6400 for xperia z1? because you guys advertised iso 6400 sensitivity last year. when I checked my manual model i can see only iso 3200. what happened to 6400 option? so ISO 6400 mean a fake advertised from sony or what?Hi,
You can't select ISO 6400 manually. The maximum ISO value you can select manually is 3200. ISO 6400 is activated automatically if conditions are very dark. You can verify the ISO value used in a photo by viewing its Exif data on a computer. When viewing the photo, open the properties of the photo and check the ISO Speed.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
I need the manual for Aiwa model no. CX-N5200U
does anyone has the manual for Aiwa stereo receiver karioke model no. CX-5200U ?
Hi josecapist5711,
As of April 1, 2009 Sony is no longer providing support for Aiwa products.
Thanks.
>Joffrey -
Manual for AIWA FD-N939YU AIWA A-3099922
looking for a manual for AIWA A-3099922 - its a deck sysem with CD, Tape,Receiver and Equalizer - used for dubbing radio shows - other indicating features is : PMN5B14
I just found the real model number - AIWA FD-N939YU for the table top unit; my problem is that I can not set the tuner channels; the ldc screen on the tuner is so faint that I can not see it other then when it is in the dark. There doesn't seem to be buttons for me to push to set the tuner on the deck nor on the remote. How do I set the tuner - I know I had done it before _ does this deck have a battery that needs to be replaced?Hello 44Edward
Welcome to the Sony Community.
The community here is for Sony Consumer electronics and Sony VAIO tech support. We do not provide support for Aiwa products. I suggest that you contact Aiwa support for assistance with the issue with your Aiwa stereo system.
Thank you for your post. -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
Where can i find a user manual for a camcorder model A1MARKII OR A1 MARK2
I have looked all over the canon site and " canot" find a user manual for this legacy model A1 MARK IITHANKS
Is this what the camcorder looks like? Regardless, still looking for a manual.
-
How do i find a user manual for i Pad Model A1219
where do i find a user manual for an iPad model A1219?
http://manuals.info.apple.com/MANUALS/1000/MA1632/en_US/ipad_ios5_user_guide.pdf
-
I need a manual for model SNPRC-0703-01 #CB022A-64003
Hewlett-Packard Model SNPRC-0703-01 #CB022A-64003 I need a manual for this. Thanks
Hi @ma1221,
Welcome to the HP Forums!
I understand that you need a manual for your HP Officejet Pro 8500 All-in-One Printer - A909a. I am happy to help!
Please visit this website, HP Officejet Pro 8500 All-in-One Printer - A909a User guides, and then you can download your user guide.
Hope this is what you are looking for, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
ALE-manual configuration of the customer distribution model
DEAR EXPERTS
how do i manually configure the customer distribution modelhi ,
to maintain or configure the customer distribution model (CDM)
go to tcode BD64.
give the sender address -
you have to mention the logical system name of the sender system. if u r sending one version to other then you have to specify the sender system address,
give the receiver address--- same as above but mention the details of receiver system.
meaintain the message type--- depends upon the type of applicaiton using like MATMAS or ........
do the same procedure again in the reverse way to transer the information from one system to other system and vice versa.
next step is to generate partner profiles.
BD82 is the tcode for it
next distribute CDM.
thats it.
If u find it useful mark the points
Regards,
GNK.
Maybe you are looking for
-
Remove video flv with actionScript
Concerning flv handling : how can I remove the video object called on the Stage by the following script? : var connection_nc:NetConnection = new NetConnection(); connection_nc.connect(null); var stream_ns:NetStream = new NetStream(connection_nc); my_
-
Oracle 9i DB / Oracle 9i Developer Suite / Windows XP
My questions: Is it possible to install the Oracle 9i Database and the Oracle 9i Developer Suite on one machine (Windows XP)? Which I have to install first? Or is it equal?
-
Suddenly unable to post comments on iWeb blog - image verification error
People suddenly can't post comments to my blog page (web.me.com/stannerory). I've tried this myself, and posting continuously fails at the image verification process, one receives an error message that says the letters entered don't match the image,
-
Can I use a USB 2.0 external HDD as a bootable clone?
Hi all - That's the question really, apologies if it's been asked numerous time before, I couldn't find a straight answer when I searched. I currently have 2 Firewire externals. One is for Time Machine, the other is a bootable clone. However the boot
-
Time Machine Restore from eSATA drive - Help!!
Hello, I have an eSATA drive that I have used for my Time Machine backup. It worked great for partial restores of files etc. But my boot HD went down so now I have to do a complete restore. When I put in the Leopard DVD it does not recognize my eSATA