AIX and JavaMail Performance

Hello,
I was wondering if somebody ran into performance issues when using JavaMail on an AIX Server. We're running AIX 4.3.3 along with IBM Java 1.3.1.
I have run some tests and found that on the normal workstation (NT box) it had no problems sending the message in fact it took about a second to do that. But once I ported the code over to an AIX server box and ran the same code it took about 13 seconds in sending the same message.
Does anybody have a solution or explanation for this problem? Any help would be appreciated.
Thanks,
Ny

Since you are talking about multiple seconds, try turning on debug mode. Then send a mail and watch what comes up on the console. If there are big pauses, you will be able to see where they occur. Chances are it's a network configuration thing.

Similar Messages

  • ANN: ANN: XDK 10.1.0.2.0 for HP-UX64, AIX and LINUX Production Release

    XDK 10.1.0.2.0 production for HP-UX64, AIX and LINUX is ready to download on OTN:
    http://otn.oracle.com/tech/xml/xdk/software/production10g/index.html

    The error indicates that the password (or wallet) files oidpwdldap1 and oidpwdr<ORACLE_SID> do NOT exist under $ORACLE_HOME/ldap/admin or your $ORACLE_HOME and $PATH are set incorrectly (a bit unlikely).
    Assuming that the $ORACLE_HOME and $PATH are indeed set to correct values, if the 2 files mentioned above do not exist under $ORACLE_HOME/ldap/admin, then perform the below action plan:
    1. Set the ORACLE_HOME to INFRASTRUCTURE ORACLE_HOME
    2. set the PATH to $ORACLE_HOME/bin:$ORACLE_HOME/ldap/bin:$ORACLE_HOME/opmn/bin:$PATH
    3. Ensure that you are able to login to sqlplus as "ods" user.
    4. If you do NOT know the password of ods user, then reset the password.
    5. Run the below command and enter the ods password when prompted for it.
    oidpasswd create_wallet=true
    6. Voila! The Wallet files are created under $ORACLE_HOME/ldap/admin.
    HTH,
    Regards,
    Praveen
    Edited by: Praveen B K on Aug 28, 2009 3:20 AM

  • PC and Network Performance

    Hello:
    The City of Detroit is planning to upgrade to 11.03 or 11i. We are looking for network and PC performance minimums/maximums to support as a minimum 11i and any known future upgrades coming but not released. Is there a publication/white paper that would provide information, not only on the above, but would be the expected performance benchmarks for AP, AR, PO, GL, Projects & Grant HRMS, OTA, and FA? At the moment we are on 10.7 and interface with EMPAC. Users are spread over the City in numerous locations. We must assume that the user will have other non-Oracle apps open such as Office and GroupWise.
    Thanks,
    J
    Gerald R J Heuer
    313-224-2109
    Beeper: 313-275-6714
    F:313-224-9342
    [email protected]
    1232 Coleman A Young Municipal Center
    2 Woodward Ave
    Detroit MI 48226

    The information is available in Appsnet under the 'Technology' Tab and you would need to look at some of the White Papers - including one with the name 'Nothing but Net' and the Network Performance Presentation.
    null

  • My solution for: Slow Installs and poor performance

    So up until today, most of anyting on XP or even vista 64 ultimate was taking a very long time to install or copy from one part of the drive to another. Startup would grow longer and game performance was dying and only once ever did reinstalling the OS do anything. No matter what I did, nothing would fix the problem.
    I ran multiple utilities (disk utility, disk warrior, tech tool deluxe, etc) but none said that there was a hardware problem. But this issue I was having (and I know some of you do) was definitely related to the computer. From my experience, I determined that there was no way this mac was perfect.
    So I scheduled a service and repair at my apple store (under warranty). When it was done a few days later, sure enough, I was told that even though the utilities we users can use on our end to diagnose problems didn't find any problems, the hard drive did not pass apple's detailed inspection and was replaced.
    In conclusion, I say that if you are having this problem, run disk utility and if you have the extra protection plan, download the Tech Tool Deluxe that apple provides on the support site. Disk utility may find some permission and disk issues but if Tech Tool doesnt find anything even on the surface scan, take it in to the apple store to have a Genius look at it. If it's not under warranty, it's up to you whether or not you want to spend that money. Overall, my computer both on Leopard and XP now runs just as it should.
    Hope that helps.

    did not work for me

  • Safari hangs and poor performance in MBPR (Mid 2012)

    Safari hangs and poor performance in MBPR (Mid 2012)? OS X 10.10.2 is up to date

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Back up all data before making any changes.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
    If your browser is Safari, then from the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If the Downloads button (with the icon of a downward-pointing arrow) is showing in the toolbar, click it and then click Clear in the box that appears. The download history will be removed. Any change?
    If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
              Stop plug-ins to save power
    Any change?
    Quit and relaunch the browser. Any change?
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
    If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
    If Parental Controls is active for any user, please turn it off and test. Any change?
    If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
    Follow the instructions in this support article. Any change?
    Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • HR infotype log in PCL4 and overall performance

    Hi there,
    There has been a few threads about PCL4 performance with regards to reading, but I have a slightly different question:
    We are working on an export program for HR masterdata and are considering using logging in PCL4 to be able to export only changed fields in the infotypes. To achieve this we need to add quite alot of extra fields and infotypes to the configuration in the IMG.
    Does anyone have any experience about how additional fields and infotypes affect runtime and database performance of the system? How optimized is the system with regards to writing to this cluster?
    It will obviously cause more data to be logged, and the database will grow slightly faster, but does it decrease responsiveness of PA30/40 for the end users? Is it possible to archive old data from this cluster? I'm guessing that it won't be a big problem, but any feedback is greatly appreciated.
    Best regards,
    Lars G. Gudbrandsen

    Hi Lars,
    Probably you would get a better response in the HCM section as opposed to ABAP.
    Maybe you can use change pointers, and badis rather, to acheive what you want but I am not 100% sure the requirement.
    Additional fields and infotypes don't impact the system negatively in my opinion. It wouldn't affect PA30, unless the specific infotype is selected and then provided if it has been correctly created in PM01 it should be fine, also depending how many fields you are talking about of course. PA40 would only be impacted for those transacitons for which the infotype is included.
    As for archiving, I am not sure, but once again i think HCM forum is your best bet.

  • Installation on AIX and Db2 9

    Hi,
    I am due to start an upgrade project for 4.7 on AIX and DB2, the originating release of DB2 is 8.2.
    But to save myself time I want to use the export of the SAP system to install it on a DB2 version 9 system, using SAPInst.
    I know this is a valid operation on a Windows Oracle platform, but was wondering if there any limitations on the DB2 side of things.
    TIA
    Chris

    That does not accomplish anything of what I wanted.
    To reduce the complexity of the upgrade, I want to use the import process to facilitate a database upgrade.
    What you are proposing is a system copy, and means I will have to do a database upgrade later.
    If my idea is not workable then fine, I will do it that way but you have not addressed any of the requirements I have stated in my post.
    Thanks
    Chris

  • HA Installation of ERP EHP4 on AIX and DB2

    Dear All,
    I have to do a HA installation of ERP EHP4 system on AIX and DB2. I have followed the standard inst.guide from SAP but I want more information. Can anyone help me in understanding how to go about installing HA in detail. I would be very grateful if anyone can provide me a guide/document of what and how they have done. Can you pls explain me the steps.
    I also have few questions
    1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
    2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
    3. Mainly, as a BASIS consultant what is our role in HA configuration?  What file systems should be defined and nfs mounted?
    Request you to take time and answer. Thanks in Advance.
    Lastly, i hope this is the right forum. If not , please let me know.

    Hi,
    >
    > 1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
    >
    I think you did not get basic of HA installation. Its neither central nor distributed installation. You need to install CI and Dialog Instance locally on 2 nodes. DB and ASCS instance on the disk that will move across 2 nodes.
    > 2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
    >
    OS team will do file system config so that file system having ASCS and DB should move across 2 nodes. And rest of the file system should be local.
    After installation making cluster movement automatic both OS and SAP Basis guy have to work together.
    > 3. Mainly, as a BASIS consultant what is our role in HA configuration?  What file systems should be defined and nfs mounted?
    >
    I would say primary role in HA installation is of Basis guy. Because he is the person who will decide what approach will you take to install HA either active-active or active-passive. Its you on whom requirement OS guy will work.
    Thanks
    Sunny

  • FTP Adapter, B2b and SOA performance Test

    Hi All,
    We have a requirement to processes Large XML files ranging from 1 MB to 200 MB. Our Flow is FTP Adapter picks the XML's Repeatable Nodes. BPEL Transforms and Loops thru each XML node and calls B2B Adapter in Each Loop. We are doing Advanced EDI batching to aggregate all the nodes in one XML to one EDI. Files upto 7 MB are working fine with FTP fileraise property= 1 and polling frequency=300s. Files with 14MB are failing with JTA transaction Time Out (Time Out Set=500s) and Server running in PROD mode. We are using SOA Suite 11.1.1.7 and HIPAA 834 Transactions. Is there a Payload size Limitation For FTP Adapter or SOA Suite? Do we need to Follow a different approach to achieve our functionality? Do we need to set any Performance parameters? Please share your thoughts.
    Thanks In Advance!!!

    Pl do not post duplicates - FTP Adapter, B2b and SOA performance Test

  • Using JSF and JavaMail to send Automated Email

    Hi All,
    Can any one please suggest I can use JSF and JavaMail to send automated email messages i.e after a person has successfully completed a form , a message is sent to his/her email address confirming that he has succesfully registered or completed a form. I have succesfull implemeted the use of javamail for sending email meassages in a JSF web application but cant seem to figure out how i can achieve automated sending of emails in JSF. Please any ideas, tutorials or source code would be very much appreciated.
    Thanks.

    I don't understand your problem:
    You have already been able to send e-mails from a JSF webapplication, but you are not capable of sending e-mails from a JSF webapplication?!
    Automated sending of e-mails will be exactly the same as non-automated.

  • Differences between AIX and Windows for SAP

    Dear All,
    I have a problem regarding SAP Software.We want to change our company software .First we order SAP On Windows with Oracle10g But Now We want SAP on AIX with Oracle10g.
    SAP delivered us software on Windows platform.
    Please Suggest me for this as what are the differences between the above two platforms and what are the differences between the above 2 platforms.
    Regards,
    Pankaj Kalsayan

    hi Pankaj,
    well, this is a very general question. perhaps you could specify a little more.
    in general i would see no difference regarding the end user sitting in front of his pc using sapgui.
    as far as i know all server side sap software is available for aix and windows (and many more).
    for administration on the other hand there is of course lots of difference. AIX is a UNIX operating system running on special hardware with power processors. it offers quit extensive virtualisation abilities using so called LPARs and supports real big number of CPUs and large RAM. Windows is a completly differnet operating system running mostly on x86/amd64 hardware.
    therefore you should also consider what know-how is available in your system administration.
    not shure if that is partly answering your question ...
    btw. if you are going forward with AIX you should perhaps consider switching oracle with db2. so you have a consistent IBM based landscape. also to me, sap and db2 seem to "like" each other more than sap and oracle
    regards,
    martin

  • How to update this query and avoid performance issue?

    Hi, guys:
    I wonder how to update the following query to make it weekend day aware. My boss want the query to consider business days only. Below is just a portion of the query:
    select count(distinct cmv.invoicekey ) total ,'3' as type, 'VALID CALL DATE' as Category
    FROM cbwp_mv2 cmv
    where cmv.colresponse=1
    And Trunc(cmv.Invdate)  Between (Trunc(Sysdate)-1)-39 And (Trunc(Sysdate)-1)-37
    And Trunc(cmv.Whendate) Between cmv.Invdate+37 And cmv.Invdate+39the CBWP_MV2 is a materialized view to tune query. This query is written for a data warehouse application, the CBWP_MV2 will be updated every day evening. My boss wants the condition in the query to consider only business days, for example, if (Trunc(Sysdate)-1)-39 falls in weekend, I need to move the range begins from next coming business day, if (Trunc(Sysdate)-1)-37 falls in weekend, I need to move the range ends from next coming business day. but I should always keep the range within 3 business days. If there is overlap on weekend, always push to later business days.
    Question: how to implement it and avoid performance issue? I am afraid that if I use a function, it greatly reduce the performance. This view already contains more than 100K rows.
    thank you in advance!
    Sam
    Edited by: lxiscas on Dec 18, 2012 7:55 AM
    Edited by: lxiscas on Dec 18, 2012 7:56 AM

    You are already using a function, since you're using TRUNC on invdate and whendate.
    If you have indexes on those columns, then they will not be used because of the TRUNC.
    Consider omitting the TRUNC or testing with Function Based Indexes.
    Regarding business days:
    If you search this forum, you'll find lots of examples.
    Here's another 'golden oldie': http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:185012348071
    Regarding performance:
    Steps to take are explained from the links you find here: {message:id=9360003}
    Read them, they are more than worth it for now and future questions.

  • How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

    how to check the usage of ram and cpu  Performance for the particular application like sqlserver ,ms word
    ranki

    Hi,
    You can use Performance Monitor and add the required counters.
    Check the below Technet article on Performance Monitor.
    http://technet.microsoft.com/en-us/library/cc749249.aspx
    Below are the steps to monitor the process in Performance Monitor.
    - Go to the Performance Monitor. 
    - Right-click on the graph and select "Add Counters".
    - In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
    - In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
    Regards,
    Jack
    www.jijitechnologies.com

  • Design Patterns, OO Design, and J2ME performance

    Hello- I am a J2ME newbie. I am a design patterny/OO kind of guy using J2SE. I'm trying to create a facade for the business logic on a project I'm working on which will work on both J2ME and J2SE. I have come up with an acceptable design, but I am afraid that the bytecode may end up being way too large for J2ME. For example, I used the command pattern for some functionality, which results in many small Command classes, which is nice for extensibility and functional encapsulation, but creates extra bytecode. Another example is I like to throw specific business exceptions, however, those also require a separate class for each exception. Another example is I like to use TypeSafe enumerations, again, new, unnecessary classes.
    I am aware of some workarounds (create a generic business exception, just put info into the message, don't use the command pattern, use bytes for non-typesafe constants), but I find myself resisting due to my hardcore OO/best practices tendencies. I guess J2ME is a whole different programming paradigm. How are you guys dealing with these issues? The most important issues with J2ME programming are small footprint and high performance, right? I guess I could write more procedural-ish code, but I am interested in any compromises that the OO guys here have come up with. Also, what size is an acceptable library/sdk in J2ME?
    thanks,
    Abraham

    I'm not an OO guy, but I can definitely say that you'll will have to find some comprmises in your designs (the generic business exeption is a very good example).
    Since you are making business apps, you do get some leeway on two issues:
    * As opposed to games, where every cycle counts, for a business app maintainability and scalability are you usually more important than performance, so OO techniques will often be a better choice than a slightly faster implementation.
    * You probably have more control over the devices you will be targetting. The most common limitation for MIDlet size these days is 64KB, so a library that more than 20-30KB probably won't be any good on these phones. But if you know your apps will be run on higher end phones you can make it a lot bigger, since they can often have MIDlets that are up to several MB in size.
    shmoove

  • Numa Organ and Digital Performer

    I just got a Studiologic Numa Organ, and I am very pleased with it.
    My Sequencer is Digital Performer 8,1 on Snow Leopard
    My Audio to Midi Setup sees the Numa ONLY if I connect it directly through the USB port to The Mac
    Audio to Midi Setup will also see my MOTU 128 Express interface also when connected through the USB port however I am unable to connect the Keyboard to the Interface as everything is grayout
    If I connect the Numa directly to the USB interface it doesn't appear in Audio to Midi Setup and Digital Performer doesnt Remap the Instruments
    The Numa is set as "Local on / MIDI on"
    While rcording I can see the various notes in the DP track, nowever when I play back the Numa doesn't make any sounds
    Any suggetions?
    PS
    The MOTU USSSB interface is upgraded to the lateset version

    If you're using Apple Loops, they will conform to the project tempo/key.
    If you have a vocal track you wish to autotune, use Logic's "Pitch Correction" tool. Make sure to place it in the first available insert in your channel strip.
    Cheers.

Maybe you are looking for