Aix server ( WebLogic 11)

Hi
Obiee Experts
how to config weblogic deployment in obiee link. could you please let me know
thnks
satya

hi
Kiran
thanks for qucick responce
i have install obiee 10.1.3.4 in Aix (Unix server). at the same way i installed weblogic also how to map with weblogic to our obiee link.
what is my query means i have install weblogic 11g in aix server (Unix) how to deployment, means how to config our obiee link through weblogic.
i am new software (Weblogic) instllation unix server . what are the steps pendig kindly let me know
i hope u understand my query
Advance Thanks
Satya

Similar Messages

Strange problem with AIX server and windows clients

I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If I start
another client the second client is horribly slow (2 sec vs 16 sec). Even if
I kill the first client the second client continues to be slow. If I have 2
clients open together, the first one continues giving 2 sec response while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent response from
the server. Irrespective of how many client I have on the NT machine, I keep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2K server,
and the clients "behave" normally i.e I get consistent repsponse time (it
may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
We even tried putting my laptop on the same network as the AIX server, but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]..
Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
get a better performance and the subsequent clients get worse performance?
>
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"vinay moharil" <[email protected]> wrote in message
news:[email protected]..
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If Istart
another client the second client is horribly slow (2 sec vs 16 sec).
Even
if
I kill the first client the second client continues to be slow. If I
have
2
clients open together, the first one continues giving 2 sec response
while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent responsefrom
the server. Irrespective of how many client I have on the NT machine, Ikeep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor
memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2Kserver,
and the clients "behave" normally i.e I get consistent repsponse time(it
may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
We even tried putting my laptop on the same network as the AIX server,
but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

How to access file from AIX server to windows

HI all,
My question is how to represent file folder name of that server
my file folder in AIX server and i want to access that file in window s machine.
* is this the right way to represent the data folder in physical schema declaration
file:///<aix server IP>/usr/oracledi/oracldi/data

No, it is not. Filename magic alone will not do the job.
AIX supports NFS (network file system) or you can use samba (implementation of the Microsoft SMB protocol to share resources in Un*x) .

How to access file from AIX server

Hi ,
I am facing a problem with Aix Machine .
I want to access the file from AIX server machine .I am in Windows machine.
Regards
Raghava

HI all,
My question is how to represent file folder name of that server
my file folder in AIX server and i want to access that file in window s machine.
* is this the right way to represent the data folder in physical schema declaration
file:///<aix server IP>/usr/oracledi/oracldi/data
Regards
Raghava
Message was edited by:
Raghava.java

AIX 5.2 : how to pass password value while creating a user on AIX server

Hi ,
Test connection is successful with AIX server , I can successfully create a user on AIX server, with defualt password.
I am not passing the any password value still some default value is being populated for the user...
In AIX while creating the user , use get force to set the password...
But while configuring the schema for AIX adapter ...if password attribute is given then it will give the error
as invalid attribute...while creating a user if password value pass...
how to set the password for the user..what attribute need to set for the password .
thanks ..

The default password might be the IdM account password of the user you are trying to provision. You don;t need to keep password in the resource schema. Just set password.password and password.confirmPassword and select AIX resource for password reset. Check the workflow-form-views document for more information on password view.

Moving Oracle 9i database from AIX server to Sun Solaris 9 server

I want to move my oracle 9i database residing on AIX server to Sun Solaris 9 server.
The database residing on AIX server has the following features :-
1. It is a production database.
2. Running in NOARCHIVE LOG Mode.
3. It was Live for few weeks, hence transactions are stored on it.
4. It has one schema,around 700 tables & 129 views.....etc
5. Huge downtime is affordable.
What is the safest way to do so ??
Yachendra

Hi Yachendra,
1. It is a production database.
2. Running in NOARCHIVE LOG Mode.By the way do you have any idea that PRODUCTION databases are always kept in ARCHIVE LOG Mode. It's is highly advice able.
3. It was Live for few weeks, hence transactions are stored on it.If you are really serious about your data and don't want to lose anything and wants to perform CROSS PLATFORM you must make sure that you have all your achive logs.
my oracle 9i database residing on AIX serverYou have already got the solution regarding that. Maran has told you for EXPORT/ IMPORT and Burleson has given you enough documents to consult.
Thanks
Shivank

WebUtil and Jacob Setting for AIX Server

Dear All
I am using forms 10G.
I have done the setting for webUtil and Jacob in my pc for browse button to be and it is working fine .
But can any one please tell me the steps for implement these things in AIX server .I mean how to configure this to utility Webutil and Jacob in AIX server .
Kindly anyone tell me what needs to be done in server for webutil ?
Edited by: LuKKa on Sep 22, 2010 12:01 PM

the steps are same as in other supported systems.
Since my blog is failed to help you then i will recommend you to do some more reading ...
Read the docs http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html

How to identify the physical IP address of AIX server on RAC Oracle 10g

Hi All,
Could you please help someone to identify the physical IP address of IBM AIX on RAC db. I have access to the database and I don't know whether the hostname mentioned in the tnsnames.ora file is virtual or physical ip adress . Is there any command to identify the physical IP address of AIX server. My objective is to gain acccess to those servers. I am a bit confused by looking at the virtual IP, private IP and Public IP addresses in the documentation and I am relatively new to this area. Also note that I am a junior developer who is trying to learn some new stuff.
Please throw some lights on this.

I am assuming you have access to the servers indicated in the tnsnames.ora file. After logging into those servers, take a look at /etc/hosts files, which lists the IP addresses and its associated host names. See if that helps. Another option is if you don't have access to the servers, "nslookup <ip_address_from_tns.ora>" should list the server name associated with the given IP Address. If your SAs have followed the general naming conventions - you should see -vip at the end.
HTH
thanks
Chandra

File datastore creation problem from window installed ODI in AIX server

HI all,
My question is how to represent file folder name of that server
my file folder in AIX server and i want to access that file in window s machine.
* is this the right way to represent the data folder in physical schema declaration
file:///<aix server IP>/usr/oracledi/oracldi/data

HI Julien,
It's really working ..........
Thanx a lot
For other people it will be helpfull info
Only change that I have made for that task are
1. I have created an new agent for that AIX machine
2. I have updated the ODIPARAM.bat
3. I have changed record separator as UNIX while creating data store for that file
4. While executing particular interface ,I have used the agent which is local to AIX machine ..................
Steps for execution:
At the time of designing you must have local copy of that file so that you can perform your mapping once it's executing well wid your local or no agent .
then come to the Topology manager change the location for that folder in physical schema declaration of that file server of AIX machine.
Now execute the same wid ur AIX agent u have created earlier..............
while U have changed the data store location from local directory to other AIX directory don't try to reverse the same otherwise u'll get "Execution query failed "or file not found kinda error as because odi system system searching local systems file.................
Julien can u provide me ur mail Id so that I can contact U for further assistance ofcourse
if u want................
regards
palash

To run and work on AIX server installed ODI

Hi all,
As I was working on ODI till the date in window o/s of my desktop.
But now I have to work on AIX server I need to know
* Is there any difference to work on ODI while I am using AIX
plz provide me necessary information..
* Will working methodology of Desiner and Topology manager be same in AIX
* is it console based or I'll have the same UI I've not worked on AIX before
*Any other info, if you tech people have regarding basic differences between
Window installed ODI and AIX installed ODI then plz provide me.
thanx and regards
Palash Chatterjee

Hello,
There should be no difference in behavior.
- All Graphical UIs are in Java and work the same on AIX.
- The installer works also on AIX.
- The only differences will be that instead of having .bat script files, you'll have .sh (unix shell) files to start the components, and that you cannot use windows services.
Just give it a try, and you'll see.
Regards,
-FX

Printing tools on Aix server with Forte/Oracle

I asked for it some weeks ago, but i had not enough answers... may be
you were on vacations !!!
I'm looking for a good software for manage print jobs on Aix server with
Oracle rdbms.
Something we cant use to make reports, bills, etc.. and callable with ou
without Forte.
If possible, reports template could be made on NT client (graphical
tools) but the jobs will run on the Aix (to avoid running on a NT client
and take all the network resources...).
What do you use on your site ?
Thanks.
Cordialement.
Patrice Bourdon
Alliance Sante France
Tel : (33) 02.54.60.26.27
Fax : (33) 02.54.60.25.00
e-M@il : [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I asked for it some weeks ago, but i had not enough answers... may be
you were on vacations !!!
I'm looking for a good software for manage print jobs on Aix server with
Oracle rdbms.
Something we cant use to make reports, bills, etc.. and callable with ou
without Forte.
If possible, reports template could be made on NT client (graphical
tools) but the jobs will run on the Aix (to avoid running on a NT client
and take all the network resources...).
What do you use on your site ?
Thanks.
Cordialement.
Patrice Bourdon
Alliance Sante France
Tel : (33) 02.54.60.26.27
Fax : (33) 02.54.60.25.00
e-M@il : [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Designer on AIX server: how to

Hi all,
I've BusinessObjects Enterprise XI 3.1 on AIX Server: how can I launch and use Designer and the other "non-web" BusinessObjects tools (e.g.Import Wizard)?
At the moment I use Designer or Import Wizard installed on a WIN Server and then I export Universes or reports to the AIX server, but soon this WIN server will be dismissed .... HELP
Thanks a lot!

Hi
the BO client tools are only available for windows. YOu can install them separately on a windows workstation.
Regards,
Stratos

Download from ArchiveLink and store in AIX server

Hi,
Is there a way to download file from SAP ArchiveLink and store it in AIX server.
In my case, i would like to download photo for HR module which displayed in PA20/PA30.
Currently i use function module 'ARCHIVOBJECT_GET_CLIENT' with the following parameters
CALL FUNCTION 'ARCHIVOBJECT_GET_CLIENT'
EXPORTING
    archiv_doc_id = connections-arc_doc-id "value of doc ID, I know how to get this
    archiv_id        = connections-archiv_id     "archiving ID, I also know how to get this
    path              = '/usr/sap/FSQ/pic/0012345.jpg'          "I want to store in this AIX folder
    doc_type       = 'JPG'
If I test path = 'C:/photo/0012345.jpg' everything works perferctly, but if I change to '/usr/sap/FSQ/pic/0012345.jpg' and I check on AIX folder, there is nothing there.
I have given full permission for sapusr ID and ReadWrite permission for this folder.
Is there any other FM for my requirement or any advice?
Thanks.
Best regards,
Bernard

hi
use SCMS_HTTP_GET_FILE
Regards
sameer.

An internal error occurred during: "starting server -weblogic server 8.1".

I am using bea workshop studio 3.2, I am always getting an error like the following:
an internal error occurred during: "starting server -weblogic server 8.1".
anybody have an idea why this happen? The funny thing is that I can only start IBM websphere server, but not any of the BEA server (neither 9 nor 8.1). The moment I clicked green "start server" button, immediately I got a pop up window that says "an internal error occurred during: starting server -weblogic server 8.1".
I used to work with IBM websphere, now I changed my job to work with BEA. Based on my experience, WebSphere is way better and easier to use. BEA sucks!
But I have to use BEA and I have been fighting with this problem for 3 days and I am desparate now, please help!!!!
Thank you very much in advance for the help!
Jingzhi

Yes, I did create a webapplication before I started the server. The more scary thing is that: I somehow managed to start the server once, I do not know how I did it. But now I cannot start it again no matter what. I compared the two settings: I swear that they are idential, but one is starting, the other is still having the same problem. Could you please give me some more hints? I followed exactly the same steps in the articles you referred.
Thanks,
Jingzhi

How to get or what tcode to use for details statistics of AIX server in sap

Dear Sir,
How I get the details of AIX Server's Statistics in SAP. I mean by which tcode I can get it. Or in Server level what command should I use .
Thanks in advance,
Pranab

Thanks every one for their prompt reply.
I have got ans. by using the command : prtconf
Thanks once again everybody.
Thanks and Regards,
Pranab

Aix server ( WebLogic 11)

Similar Messages

Maybe you are looking for