AIX WLS6.1 UDB Core dumps
We are using WLS6.1 sp2 on AIX 4.3.3 connected to a UDB database vs7.2
fixpack3. We are getting core dumps. The dump file points to the jdbc driver
being the cause.
Has anyone faced this????
Thanks in advanced.
Navin
Hi.
What driver are you using?
You might have better luck posting this question on the JDBC newsgroup.
Regards,
Michael
navin garg wrote:
We are using WLS6.1 sp2 on AIX 4.3.3 connected to a UDB database vs7.2
fixpack3. We are getting core dumps. The dump file points to the jdbc driver
being the cause.
Has anyone faced this????
Thanks in advanced.
Navin--
Michael Young
Developer Relations Engineer
BEA Support
Similar Messages
-
MDM installation on AIX 5.3 core dumps
Hi all,
We installed MDM 5.5 SP4 on AIX 5.3 ML 5 (and the latest patches were applied last week-end).
The MDM Server, Import and Syndication daemons are started.
Database is Oracle 10.2 (corresponding Oracle client is used), installed on the same server.
MDM client software is in sync with the server level.
Since the installation, we get core dumps of the mds daemon (even when trying to perform the most basic operations). Consider it to be completely unusable for testing anything. You look at it, it breaks. Sorry, but that is how it is.
MDM Patches and hotfixes to the patches have been applied up to the latest level The problem is reported at SAP Support and they have core dumps, logfiles, trace files for studying. So far, the only feedback we got was to install MDM on its own server (it is a trial installation on a server where other applications are running - though I can hardly see that as a cause for core dumps).
My questions :
- are we unique in running MDM on this software paltform ?
- are others (if they exist experiencing the same problems on AIX 5.3 ?
To be honest : for the moment we are thinking about reinstalling on a Windows server.
Thanks in advance for any feedback,
Frank Van OverloopHello,
we have finally made some progress on this issue.
Basically, we suffered from a combination of :
- wrong usage of the product
- probably shaky exception handling in the AIX version
The cause was found by SAP MDM support after we reconstructed the problem while using a special debug-version of the mds executable. This produced a usable dump.
--- extract from the SAP reply -
The core dump shows a crash in recalculating the family tree after the
import. Family tree is being used only to create printed catalogs (which require the publisher and an additional license).
1) Do you have any value in the categories table?
2) Does the MDM server crash if you cancel the automatic family tree
recalculation in the import map, and answer "no" in the dialog box which asks to recalculate the family tree?
3) Do you intend to create a printed catalog?
If the answer to any of the questions is "no", then this asserts that
the recalculation of the family tree should not take place at all. In
this case the family table could/should be deleted. And this should not
reoccur.
end extract -
After we deleted this family table, the tests are running stable.
It's a pity that the program does not 'die' in a more elegant way or gives some understandable indication on what is going wrong.
It also looks like this exception is handled better on the Windows implementation. The same 'functional mistake' was made there and this produced no dumps at all. Could be a porting issue from one platform to another.
Regards,
Frank -
Hi
In AIX core dump file, we got this message
'SOFTWARE PROGRAM ABNORMALLY TERMINATED'CORE FILE NAME
/scclive/oracle/inst/apps/SCC_ebsprod/ora/10.1.2/forms/core
PROGRAM NAME
frmweb
We are getting these errors frequently when there was some network issue between our server and PDC. That why oracle application server is hanging and we had to bounce for resolving the issue. Can anybody help how to resolve permanently from AIX point of view?
Regards
AteeqHi
1)In which way the PDC is connected to your EBIZ system?
No we are using hostfile. 2)If point 1 is correct then u should solve the network issue as the forms sessions are hanging coz of network issue OR If point 1 is correct then you must update the EBIZ system hostfile with the fully qualified domain name and remove DNS server for the EBIZ system to solve this issue.
We do have fully qualified domanin name in hostfile.As well as using DNS server also.Regards
Ateeq -
JAVA CORE DUMP IN AIX MACHINES
Hi,
we got a java core dump in a AIX machine .
The excerpts of the core dump file is as below. Please can anyone suggest me what the core dump is all about and what i need to do to fix the problem :
NULL ------------------------------------------------------------------------
0SECTION XHPI subcomponent dump routine
NULL ==============================
1XHTIME Wed Sep 14 09:48:39 2005
1XHSIGRECV SIGILL received at 0xd2a36cfc in /iscp/node/lib/libmocj.a. Processing terminated.
1XHFULLVERSION J2RE 1.4.1 IBM AIX build ca1411ifx-20040810 (141SR3)
NULL
1XHCURRENTTHD Current Thread Details
NULL ----------------------
2XHCURRSYSTHD "Thread-16" sys_thread_t:0x36866028
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD2A2FC40 in changeTimeOut__FP8__clienti
3XHSTACKLINE at 0xD2A36CFC in ismc_getUsersOnsite__FRCQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc__TQ2_3std9allocatorXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc____RQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11c
3XHSTACKLINE at 0xD2A4D8D0 in Java_com_telcordia_iscp_moc_libj_cgp_RPC_getUsersOnsite
3XHSTACKLINE at 0xD2821CE8 in mmipInvoke_O_O
3XHSTACKLINE at 0xD27E9370 in mmipExecuteJava
3XHSTACKLINE at 0xD27E1FB4 in xeRunJavaVarArgMethod
3XHSTACKLINE at 0xD27E2260 in xeRunDynamicMethod
3XHSTACKLINE at 0xD27CFFFC in threadRT0
3XHSTACKLINE at 0xD293CD10 in xmExecuteThread
3XHSTACKLINE at 0xD2940BF4 in threadStart
3XHSTACKLINE at 0xD2A75408 in _start
3XHSTACKLINE at 0xD005277C in pthreadbody
NULL
1XHOPENV Operating Environment
NULL ---------------------
2XHHOSTNAME Host : cu11sv01_if0:10.104.148.79
2XHOSLEVEL OS Level : AIX 5.2.0.0
2XHCPUS Processors -
3XHCPUARCH Architecture : POWER_PC (impl: unknown, ver: unknown)
3XHNUMCPUS How Many : 2
/jni
4XESTACKTRACE at java.lang.Object.wait(Native Method)
4XESTACKTRACE at java.lang.Object.wait(Object.java:438)
4XESTACKTRACE at com.inprise.vbroker.orb.ORB.run(ORB.java:261)
4XESTACKTRACE at com.telcordia.iscp.moc.server.config.ismc_config_mgr.main(ismc_config_mgr.java:125)
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD005D814 in eventwait
3XHSTACKLINE at 0xD0069740 in condwait_local
3XHSTACKLINE at 0xD0069B98 in condwait
3XHSTACKLINE at 0xD006A6F8 in pthread_cond_wait
3XHSTACKLINE at 0xD2A7C8AC in condvarWait
3XHSTACKLINE at 0xD2A7B718 in sysMonitorWait
3XHSTACKLINE at 0xD286B1F8 in lkMonitorWait
3XHSTACKLINE at 0xD27E0234 in JVM_MonitorWait
3XHSTACKLINE at 0xD2832168 in sysInvokeNative
3XHSTACKLINE at 0xD281CE58 in mmipInvokeJniMethod
3XHSTACKLINE at 0xD27E9370 in mmipExecuteJava
3XHSTACKLINE at 0xD27E192C in xeRunJniMethod
3XHSTACKLINE at 0xD2819F58 in invokeJniMethod
3XHSTACKLINE at 0xD2813D4C in jni_CallStaticVoidMethod
NULL
NULL ----------------------------------------------------
2XMFULLTHDDUMP Full thread dump Classic VM (J2RE 1.4.1 IBM AIX build ca1411ifx-20040810 (141SR3), native threads):
3XMTHREADINFO "Thread-16" (TID:0x300E9E88, sys_thread_t:0x36866028, state:R, native ID:0xF37) prio=5
4XESTACKTRACE at com.telcordia.iscp.moc.libj.cgp.RPC.getUsersOnsite(Native Method)
4XESTACKTRACE at com.telcordia.iscp.moc.libj.cgp.RPC.getUsersFromSite(RPC.java:27)
4XESTACKTRACE at com.telcordia.iscp.moc.server.config.RPCThread.rpcGetUsers(RPCThread.java:111)
4XESTACKTRACE at com.telcordia.iscp.moc.server.config.RPCThread.run(RPCThread.java:60)
4XESTACKTRACE at java.lang.Thread.run(Thread.java:568)
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD2A2FC40 in changeTimeOut__FP8__clienti
3XHSTACKLINE at 0xD2A36CFC in ismc_getUsersOnsite__FRCQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc__TQ2_3std9allocatorXTQ2_3std12basic_stringXTcTQ2_3std11char_traitsXTc_TQ2_3std9allocatorXTc____RQ2_3std4listXTQ2_3std12basic_stringXTcTQ2_3std11c
3XHSTACKLINE at 0xD2A4D8D0 in Java_com_telcordia_iscp_moc_libj_cgp_RPC_getUsersOnsite
3XHSTACKLINE at 0xD2821CE8 in mmipInvoke_O_O
3XHSTACKLINE at 0xD27E9370 in mmipExecuteJava
3XHSTACKLINE at 0xD27E1FB4 in xeRunJavaVarArgMethod
3XHSTACKLINE at 0xD27E2260 in xeRunDynamicMethod
3XHSTACKLINE at 0xD27CFFFC in threadRT0
3XHSTACKLINE at 0xD293CD10 in xmExecuteThread
3XHSTACKLINE at 0xD2940BF4 in threadStart
3XHSTACKLINE at 0xD2A75408 in _start
3XHSTACKLINE at 0xD005277C in pthreadbody
NULL
ThanksTake a look at this IBM article to see if it helps:
http://www-128.ibm.com/developerworks/eserver/library/es-javaonaix_core.html -
How to turn off core dump for WebLogic 8.1 running on AIX 5.3
Hi there,
Is there a way we can turn off core dumping for WebLogic 8.1 running on AIX 5.3?
Thank you.
Regards,
SurenderHi Surender,
Please add the following Flag in the JAVA_OPTIONS of your servers StartScript like following :
JAVA_OPTIONS=${JAVA_OPTIONS} -Xdump:system:none
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com/2009/12/30/jvm-crash-and-native-outofmemory/ (WebLogic Wonders Are Here) -
Core dump with WLS6.1SP2 on HP in libjvm.sl
I'm getting the following core dump on HP/UX 11.0. Has anyone seen this before? I'm using the JVM that ships with Weblogic.
Unexpected Signal : 10 occurred at PC=0xc37feb60
Function name=compute_is_subtype_of__13instanceKlassFP12klassOopDesc
Library=/home/darcher/bea/jdk131/jre/bin/../lib/PA_RISC2.0/server/libjvm.sl
Current Java thread:
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x00034df8 nid=23 lwp_id=6933 runnable [0x07bf3000..0x07b75478]
at inetsoft.report.internal.Gop.compare(Gop.java:766)
at inetsoft.report.Common.compare(Common.java:610)
at inetsoft.report.filter.DefaultComparer.compare(DefaultComparer.java:36)
at inetsoft.report.filter.SortFilter.compare(SortFilter.java:164)
at inetsoft.report.filter.SortFilter.qsort(SortFilter.java:195)
at inetsoft.report.filter.SortFilter.qsort(SortFilter.java:214)
at inetsoft.report.filter.SortFilter.qsort(SortFilter.java:214)
Thanks,
DaveI'm getting the following core dump on HP/UX 11.0. Has anyone seen thisbefore? I'm using the JVM that ships with Weblogic.
Turn off the native IO first ... see if that makes a dif.
Then turn off hotspot (or JIT) and see if that makes a dif.
Then call HP (if it's the JIT) or BEA (if it's the native IO).
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"David W. Archer" <[email protected]> wrote in message
news:[email protected]..
> -
Application cause java core dump, how can i do?
Hi
In the case, we're using JDK 1.4 and Hibernate on Aix 64 bit, but seems we've got lots of java core even occupied full hard space and cause application crash
system info :
JavaVersion is J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM)
build caix64142ifx-20051115 (SR3 + 94164 + 97403 + 97482)
(note the 64 bit JVM).
-Xmx=1024 and -xms=512, free heap is 330,415,568 bytes, and allocated
is 1073,740,288 bytes.
some core dump :
WebContainer : 4
at java.io.ObjectInputStream.readString()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0() at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readArray()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readObject()
at java.util.HashMap.readObject()
at sun.reflect.GeneratedMethodAccessor399.invoke()
at sun.reflect.DelegatingMethodAccessorImpl.invoke()
at java.lang.reflect.Method.invoke()
at java.io.ObjectStreamClass.invokeReadObject()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.defaultReadFields()
at java.io.ObjectInputStream.readSerialData()
at java.io.ObjectInputStream.readOrdinaryObject()
at java.io.ObjectInputStream.readObject0()
at java.io.ObjectInputStream.readObject()
at com.ibm.ws.naming.util.Serialization$1.run()
at com.ibm.ws.security.util.AccessController.doPrivileged()
at com.ibm.ws.naming.util.Serialization.deserializeObject()
at com.ibm.ws.naming.util.Helpers
.processSerializedObjectForLookupExt()
at com.ibm.ws.naming.util.Helpers.processSerializedObjectForLookup()
at com.ibm.ws.naming.jndicos.CNContextImpl.processResolveResults()
at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup()
at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup()
at com.ibm.ws.naming.jndicos.CNContextImpl.lookupExt()
at com.ibm.ws.naming.jndicos.CNContextImpl.lookup()
at com.ibm.ws.naming.util.WsnInitCtx.lookup()
at javax.naming.InitialContext.lookup()
at com.ibm.wsspi.RegistryLoader.getPluginRegistry()
at com.ibm.wsspi.IPluginRegistryFactory.getPluginRegistry()
at ibmjsp.com2E_ibm_2E_ws_2E_console_2E_appmanagement
._collectionTableLayout._jspService()
at com.ibm.ws.jsp.runtime.HttpJspBase.service()
at javax.servlet.http.HttpServlet.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest()
at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper
.handleRequest()
at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper
.handleRequest()
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.include()
at org.apache.jasper.runtime.JspRuntimeLibrary.include()
at org.apache.jasper.runtime.PageContextImpl.include()
at org.apache.struts.tiles.TilesUtilImpl.doInclude()
at org.apache.struts.tiles.TilesUtil.doInclude()
at org.apache.struts.taglib.tiles.InsertTag.doInclude()
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag()
at org.apache.struts.taglib.tiles.InsertTag.doEndTag()
at ibmjsp.secure.layouts.vboxLayout._jspService()
at com.ibm.ws.jsp.runtime.HttpJspBase.service()
at javax.servlet.http.HttpServlet.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter()
... more stack lines not shown ===================================
"WebContainer: 2" shows much
the same stack trace, but extends to include
@com.ibm.ws.console.core.servlet.WSCUrlFilter.continueStoringTaskState()
at com.ibm.ws.console.core.servlet.WSCUrlFilter.doFilter()
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter()
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter()
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest()
Through IBM, we got those answer :
Looking at the javacore files, we're seeing OOM errors. However,
looking at a heapdump, we're not seeing total heap space exhaustion -
around half of the heap is occupied, and occupancy by the vartious
objects seems, to me at least, to be normal.
The threads
seem to be using the compound class loader to load the customer's
"Hibernate" code - and in the largest of the threads in the heapdump -
(it consumes 258,720,168 bytes), the class org/hibernate/impl/Session
Impl and its children - consume 129,540,864 bytes.
The other 128,785,680 is consumed by org/hibernate/proxy/CGLIBLazyInitia
lizer. There are some other classes that make up the small difference
if you added these numbers.
The class com/softleader/hibernate/util/HibernateUtil and its children
consume 74,932,848 bytes.
I could go on through the heapdump, but there are very large classes
in here, and it may be more advantageous to get a verbosegc turned on
to show the patterns of JVM Heap requirements.
I suppose that the customer is developing this app for a 32bit
architecture market, since they are keeping their JVM Heap within the
32 bit limits. If this is the case, then Xmx=1280 and Xms=384 seems a
more reasonable JVM setting. If they are not, and they want to try
Xmx above 1280, then we have not yet had much experience with 64 bit
but I'd expect that the larger heapsize would benefit the application.
Either way, we need verbosegc turned on to monitor the heap requests.
That mean, i have to turn up JVM Heap size? or what can i do for it?
Thanks a lot.I'd hook up a profiler to your app and monitor it to see what's happening and what objects aren't playing nice.
-
Core dump when starting extract, no error messages
Hello,
This is a basic one way replication, Data Pump and Replicat start but Extract stops at once.
In ggserr.log there's only a message: EXTRACT EORATE02 starting, nothing else. In ggsci it can be seen that it's stopped.
CHECKPARAMS didn't give the message "Parameters processed successfully", neither did it give error messages
when starting the extract.
There are no old Oracle processes which could prevent Extract from starting.
There's EORATE02.pce in dirpcs, although EORATE02 is not running. If I delete it and try to start the extract,
the extract will immediately stop.
A core file has been created in GG_HOME when trying to start the extract. I haven't been able to find out how to read it.
Source and target are on Aix 6100-06. The source database is Oracle 10.1.0.5, target database is Oracle 11.2.0.3.
The installation files are V32435-01.zip for db 10.1.0.5 (ggs_AIX_ppc_ora10.1_64bit.tar), V32437-01.zip
for db 11.2.0.3 (ggs_AIX_ppc_ora11g_64bit.tar). This is GoldenGate 11.2.1.0.1.
The db:s are on Asm.
There's only 1 table in source, 1 in target, they are identical and empty.
There's enough space in the OS.
If I run the extract in OS (extract paramfile dirprm/eorate02.prm), it ends like this without more information:
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********
Abort(coredump)
This happens in both ways of extract described below.
(1)
EXTRACT EORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
EXTTRAIL ./dirdat/data02/te
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
TABLE USER.myobjects2;
(2)
EXTRACT EORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
EXTTRAIL ./dirdat/data02/te
tranlogoptions COMPLETEARCHIVEDLOGONLY ALTARCHIVELOGDEST /backup/arch_log/abcd/ABCD/archivelog
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
TABLE USER.myobjects2;
Here's more information on this setup and commands which have been used:
add extract EORATE02 tranlog begin now, threads 1
add exttrail ./dirdat/data02/te, extract EORATE02, megabytes 5
EXTRACT EPMPTE02
PASSTHRU
RMTHOST HOSTNAME, MGRPORT 13447
RMTTRAIL /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
TABLE USER.myobjects2;
ADD EXTRACT EPMPTE02 EXTTRAILSOURCE ./dirdat/data02/te
ADD RMTTRAIL /u01/app/oracle/gg11210/for_db11/dirdat/data02/tr EXTRACT EPMPTE02, MEGABYTES 5
Target
REPLICAT RORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
HANDLECOLLISIONS
ASSUMETARGETDEFS
DISCARDFILE ./dirrpt/RORATE02.DSC, PURGE
MAP USER.MYOBJECTS2, TARGET USER.MYOBJECTS2;
add replicat RORATE02, exttrail /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
add checkpointtable ggs_owner.ggschkpt
Grants
Source:
grant connect, resource to ggs_owner;
grant select any dictionary, select any table to ggs_owner;
grant create table, alter any table to ggs_owner;
grant flashback any table to ggs_owner;
grant execute on dbms_flashback to ggs_owner;
grant execute on utl_file to ggs_owner;
grant create session, alter session to ggs_owner;
Target:
grant create session, alter session, resource, connect, select any dictionary to ggs_owner;
grant select any table, insert any table, update any table, delete any table to ggs_owner;
grant create table, alter any table, lock any table to ggs_owner;
Source
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
ggsci add trandata USER.myobjects2
mgr.prm
--GoldenGate Manager parameter file
PORT 13346
Target
GLOBALS
CHECKPOINTTABLE ggs_owner.ggschkpt
mgr.prm
--GoldenGate Manager parameter file
PORT 13447
Thanks for reading this far. Possible comments will be much appreciated!
Best regards
Edited by: user11323660 on 14.6.2012 6:39
Edited by: user11323660 on 14.6.2012 6:41Hello,
Could you wrap your process definitions in proper code brackets so its easier to understand.
Also I'm not sure what your problem is other then you are receiving core dumps. I'm happy to help.
Two small comment though regarding your ASM config
1 . Dont not use ggs_owner as the asm user
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********2. Create a TNSNAMES entry for your ASM instance and tehn use the following:
TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD *****Also here is an example of an extract process that I've setup on RAC database with ASM
EXTRACT EWFMMTLP
EXTTRAIL ./dirdat/ew
USERID GGATE@MY_DB, PASSWORD ggatehcc
DDLOPTIONS ADDTRANDATA RETRYOP RETRYDELAY 20 MAXRETRIES 5 REPORT
TRANLOGOPTIONS EXCLUDEUSER ggate
TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD ****
TRANLOGOPTIONS ALTARCHIVELOGDEST /u02/oracle/fast_recovery_area/MY_DB/archivelog
TRANLOGOPTIONS PURGEORPHANEDTRANSACTIONS
STATOPTIONS RESETREPORTSTATS
REPORT AT 00:01
REPORTROLLOVER AT 00:01
REPORTCOUNT EVERY 60 SECONDS, RATELet me know if that helps
Jan S. -
Core dump on solaris 8/7 making JNI call.
Hi,
I am running solaris 8 and solaris 7 with Java 1.3.1. I have required solaris patches installed on the machine for java 1.3.1.
From a C program I am making some JNI calls and when I run the program it core dumps at the very first JNI call. C program that make JNI calls are in a .so file.
Same C code with Java 1.3.1 is running fine on window 2000, AIX 5.1, RedHat Advanced Server 2.1 and SuSE Enterprise Linux 7.
Any help will be greatly appriciated.
ThanksHiya,
Any resolution to this post , we have a native JNI call on a Websphere server running on Solaris 8 .. and same thing happening .. random core dump on the box ..
No warning , no explanation
Thanks so much for your help
(btw . running Sun jvm 1.4.2_13) -
Core Dump when installing SAP Integration Kit Fix Pack 3.1
When installing the SAP Integration Kit Fix Pack 3.1 we are getting the following error message..
boperl.sh[88]: 9961568 Memory Fault (Core Dump)
This install is being done on AIX after the SP3 was installed.
Any ideas?
Thanks,
DeeptiDO you install the SP3 full version of the integration Kit?
Regards,
Stratos -
Process core dumps when spawned by Runtime.exec()
I am using a Runtime.exec() command to spawn a local executable process on HP-UX. The local process (C++ executable) starts and is functional, though at a certain point during operation, the process creates a segmentation fault and core dumps. If the same process is spawned manully from a shell, this does not occur.
The process cores at the same point every time (a call to free+ in the system libC library). I have duplicated as much of my shell environment in the Runtime.exec() call as possible. Also, this issue does not occur on AIX or Linux (ports of my code to those platforms).
What is the fundimental difference between spawning a process from a shell V.S. the JVM spawning the process that could cause this difference in behavior?
java version "1.4.2.07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2.07-050121-15:53)
Java HotSpot(TM) Server VM (build 1.4.2 1.4.2.07-050121-17:30-PA_RISC2.0 PA2.0 (aCC_AP), mixed mode)We are currently having the same problem, it is killing us.
We have upgraded to jdk 1.6u16 and still have the problem.
We think it is related to sparc platform we had been running for some time with same code on X86 server
Our solaris release is: Solaris 10 11/06 s10s_u3wos_10 SPARC
We can't get a reproducible small test case. It is getting us most often when the JVM running our
appserver uses the Runtime.getRuntime().exec(cmd);
We are jumping through hoops looking for workaround. We are trying to write a command server that can
have the command sent through a socket and have all the ouput sent back over the same socket.
That way the app server JVM is not the one doing the fork and exec. -
LINK 시에 CORE DUMP가 생길 경우(TMP 공간의 부족 현상)
제품 : PRECOMPILERS
작성날짜 : 1999-04-09
'Ld:Fatal error: Segmentation fault - core dump'와 같은
error가 relink작업이나 precompile을 수행중에 나타나는
경우가 있다.
이 경우에는 다음과 같은 조치를 해 주어야 한다.
* 작업을 수행하기 위해서 /tmp의 여유공간이 최소한
50Mb이상이 되도록 해주어야 한다.
* 만약 50Mb를 확보할수 없으면 oracle owner가 쓰기
권한이 있는 directory를 확보하여 TMPDIR환경변수로
만들어 준다.
아래에 예를 들겠다.
1. 먼저 df명력어로 file system의 여유 공간을 확인한다.
명령어는 각 기계별과 다음과 같다.
df (for SunOS, AIX,SGI, OSF, DGUX)
df -k (for Solaris, Unisys SVR4, ATT)
bdf (for HPUX)
df -v (for SCO)
Solaris를 예로 들자면.
$ df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t3d0s0 72215 24030 40965 37% /
/dev/dsk/c0t3d0s6 288391 167878 91683 65% /usr
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
/dev/dsk/c0t3d0s4 384847 126243 220124 36% /opt
/dev/dsk/c0t3d0s3 25533 20445 5088 81% /tmp
/tmp 는 고작 5mb 가 남아 있고 /opt 는 220 mb 가 남아
있는 것을 확인할수 있다.
2. directory를 생성하고 oracle이 쓸수 있도록 다음과 같이
조치한다.
$ mkdir /opt/oratmp
$ chown oracle /opt/oratmp
3. 이 directory tmp 공간으로 사용한다.
For Bourne or Korn shells:
$ TMPDIR=/opt/oratmp; export TMPDIR
For C Shell:
$ setenv TMPDIR /opt/oratmp
4. Relink작업이나 Link작업을 수행한다. -
Hotspot core dumping during JVM garbage collection ?
We have an application which calls a 3rd party supplied server API which has recently been upgraded to use Java 1.5
We are getting the following error reported by our client application. The application is also now running Java 1.5 but references many classes in jar files which would have quite old code in.
The supplier of the API has stated that the problem requires us to recompile all our jar files using v 1.5 ( including things like jconnect and jms ?!?!? ). This sounds like a bit of a cop-out to me, not to mention being impossible since we don't have the source for things like jconnect.
I suspect that there is a garbage collection problem at the bottom of all this, but I'm not sure how I can "prove" this, nor do I currently have any real clue as to how to fix any GC problem that may exist.
The application is supposed to wait for a message on a MQSeries queue and then transforms it via Xalan XSLT and sends it to a Server application. I've tried playing around with heap sizes etc but that just seems to make it worse. If I leave it at the settings that the previous version used then the client at least manages to process a couple of messages before core dumping. There doesn't seem to be a consistent trigger event to cause the core dump ( it's not a message arriving on a queue for example ) but it does seem to be fairly consistent timewise, i.e. after
Any ideas gratefully accepted.
Here's a logfile excerpt from my applications showing the Hotspot error message :
=====================================================================================
08-Jul-2008 10:01:05 Waiting for messages from COLT.BBFS
08-Jul-2008 10:02:05 Waiting for messages from COLT.BBFS
08-Jul-2008 10:03:05 Waiting for messages from COLT.BBFS
405.815: [GC [PSYoungGen: 17331K->9244K(37632K)] 111702K->103615K(192128K), 0.1615910 secs]
405.977: [Full GC#
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xfe141348, pid=2600, tid=8
# Java VM: Java HotSpot(TM) Server VM (1.5.0_03-b07 mixed mode)
# Problematic frame:
# V [libjvm.so+0x141348]
# An error report file with more information is saved as hs_err_pid2600.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
=====================================================================================
The logfile referred to in the error message contains the following.
=====================================================================================
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xfe141348, pid=2600, tid=8
# Java VM: Java HotSpot(TM) Server VM (1.5.0_03-b07 mixed mode)
# Problematic frame:
# V [libjvm.so+0x141348]
--------------- T H R E A D ---------------
Current thread (0x001484d8): VMThread [id=8]
siginfo:si_signo=10, si_errno=0, si_code=1, si_addr=0x0000080f
Registers:
O0=0x00487588 O1=0xfe7d6454 O2=0x000079b0 O3=0x00007800
O4=0x00008868 O5=0x00147d48 O6=0xf8781460 O7=0xfe0f7938
G1=0xe52aaae8 G2=0x00000003 G3=0x00000003 G4=0x001484d8
G5=0xf8781d98 G6=0x00000002 G7=0xf8781d98 Y=0x805683e2
PC=0xfe141348 nPC=0xfe14134c
Top of Stack: (sp=0xf8781460)
0xf8781460: fe786000 00c6ba20 fe10013c e54bab68
0xf8781470: 0000080f e54bab6c 0000080f 00000004
0xf8781480: 00487588 00000134 e54bab6c 00000004
0xf8781490: 00000001 00000000 f87814c0 fe17aef4
0xf87814a0: fe6485b4 fe7d899c 001484d8 0011da40
0xf87814b0: 00148988 00148c10 00148d7c f8781880
0xf87814c0: 007c3389 007c3c0e 00000f87 00008868
0xf87814d0: 00008800 00487588 fe141310 fe7d6454
Instructions: (pc=0xfe141348)
0xfe141338: ec 06 c0 1a 80 a5 a0 00 22 40 00 0a ba 07 60 01
0xfe141348: f2 05 a0 00 ae 0e 60 03 80 a5 e0 03 22 40 00 05
Stack: [0xf8702000,0xf8781d98), sp=0xf8781460, free space=509k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [libjvm.so+0x141348]
V [libjvm.so+0x17aefc]
V [libjvm.so+0x2d557c]
V [libjvm.so+0x300ef8]
V [libjvm.so+0x301e84]
V [libjvm.so+0x2ff950]
V [libjvm.so+0x29df30]
V [libjvm.so+0x362b44]
V [libjvm.so+0x6436f0]
VM_Operation (0xe03012b0): parallel gc system gc, mode: safepoint, requested by thread 0x0031bca0
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x00b2c028 JavaThread "Thread-4" [_thread_in_native, id=85]
0x007f5048 JavaThread "Thread-0" [_thread_blocked, id=84]
0x00c27cf0 JavaThread "Notification Delivery" [_thread_blocked, id=81]
0x0026fa08 JavaThread "RMI LeaseChecker" daemon [_thread_blocked, id=73]
0x00821048 JavaThread "RMI RenewClean-[162.11.2.32:44425]" daemon [_thread_blocked, id=70]
0x0031bca0 JavaThread "GC Daemon" daemon [_thread_blocked, id=67]
0x00cd5d28 JavaThread "RMI Reaper" [_thread_blocked, id=66]
0x003c9300 JavaThread "Timer-0" daemon [_thread_blocked, id=65]
0x00929fe0 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=64]
0x0089bf18 JavaThread "SeedGenerator Thread" daemon [_thread_blocked, id=42]
0x00c47248 JavaThread "Pool thread #7" daemon [_thread_blocked, id=38]
0x00c466a0 JavaThread "Pool thread #6" daemon [_thread_blocked, id=37]
0x00311850 JavaThread "Pool thread #5" daemon [_thread_blocked, id=36]
0x00287a40 JavaThread "Pool thread #4" daemon [_thread_blocked, id=35]
0x00286e98 JavaThread "Pool thread #3" daemon [_thread_blocked, id=34]
0x00c134b0 JavaThread "Pool thread #2" daemon [_thread_blocked, id=33]
0x00ad09e0 JavaThread "Pool thread #1" daemon [_thread_blocked, id=32]
0x00286cd8 JavaThread "PoolThreadManager" daemon [_thread_blocked, id=31]
0x00c129e0 JavaThread "Channel Reaper" daemon [_thread_blocked, id=30]
0x00c669e8 JavaThread "ORB Daemon Thread" daemon [_thread_blocked, id=29]
0x00b10170 JavaThread "Worker for ServerProtocol: (iiop) /0.0.0.0:20168" daemon [_thread_blocked, id=22]
0x008a17e0 JavaThread "Syn~ Client" daemon [_thread_blocked, id=21]
0x003dc378 JavaThread "PoolScavenger0" daemon [_thread_blocked, id=20]
0x0015a928 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=15]
0x00159880 JavaThread "CompilerThread1" daemon [_thread_blocked, id=14]
0x00158a18 JavaThread "CompilerThread0" daemon [_thread_blocked, id=13]
0x00157b98 JavaThread "AdapterThread" daemon [_thread_blocked, id=12]
0x00156dc8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11]
0x0014ccd8 JavaThread "Finalizer" daemon [_thread_blocked, id=10]
0x0014ad90 JavaThread "Reference Handler" daemon [_thread_blocked, id=9]
0x00038238 JavaThread "main" [_thread_in_native, id=1]
Other Threads:
=>0x001484d8 VMThread [id=8]
0x0015c3b0 WatcherThread [id=16]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00037728/0x00037758] Threads_lock - owner thread: 0x001484d8
[0x00033650/0x00037ba8] Heap_lock - owner thread: 0x0031bca0
Heap
PSYoungGen total 37632K, used 9244K [0xf2eb0000, 0xf7ba0000, 0xf8400000)
eden space 28352K, 0% used [0xf2eb0000,0xf2eb0000,0xf4a60000)
from space 9280K, 99% used [0xf4a60000,0xf5367080,0xf5370000)
to space 25216K, 0% used [0xf6300000,0xf6300000,0xf7ba0000)
PSOldGen total 154496K, used 94371K [0xe8400000, 0xf1ae0000, 0xf2eb0000)
object space 154496K, 61% used [0xe8400000,0xee028e78,0xf1ae0000)
PSPermGen total 35584K, used 18260K [0xe4400000, 0xe66c0000, 0xe8400000)
object space 35584K, 51% used [0xe4400000,0xe55d5158,0xe66c0000)
Dynamic libraries:
0x00010000 /dsdvlp/java/jvm/jdk1.5.0_03/bin/java
0xff350000 /usr/lib/libthread.so.1
0xff340000 /usr/lib/libdl.so.1
0xff200000 /usr/lib/libc.so.1
0xff390000 /usr/platform/SUNW,Sun-Fire-880/lib/libc_psr.so.1
0xfe000000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/server/libjvm.so
0xff1e0000 /usr/lib/libsocket.so.1
0xff2d0000 /usr/lib/libsched.so.1
0xff1b0000 /usr/lib/libCrun.so.1
0xff160000 /usr/lib/libm.so.1
0xff080000 /usr/lib/libnsl.so.1
0xff060000 /usr/lib/libmp.so.2
0xff030000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/native_threads/libhpi.so
0xfdfc0000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libverify.so
0xfdf80000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libjava.so
0xfdf50000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libzip.so
0xfb7e0000 /usr/lib/locale/en_GB.ISO8859-1/en_GB.ISO8859-1.so.2
0xe4190000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/libnet.so
0xe3bd0000 /dsdvlp/lib/5/libSolarisNatives.so
0xe3e90000 /dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/librmi.so
VM Arguments:
jvm_args: -Djava.ext.dirs=/dsdvlp/java/tmijar/firs7/lib/cli:/dsdvlp/java/tmijar/firs7/lib/cli/ext:/dsdvlp/java/tmijar/firs7/lib/cmn/OpenORB:/dsdvlp/java/tmijar/firs7/lib/cmn/OpenORB/ext:/dsdvlp/java/tmijar/firs7/lib/cmn:/dsdvlp/java/tmijar/firs7/lib/cmn/ext:/dsdvlp/java/tmijar/firs7/daemonlib -Duser.dir=/dsdvlp/java/tmijar/firs7 -Dopenorb.config=file:/dsdvlp/java/tmijar/firs7/configs/OpenORB/config/SynOpenORB.xml -Dopenorb.home=file:/dsdvlp/java/tmijar/firs7/configs/OpenORB -Dcom.coexis.syn.general.orbbinding=com.coexis.syn.general.orbbinding.openorb.OpenORBBinding_1_4 -Dsun.rmi.dgc.client.gcInterval=360000 -Dsun.rmi.dgc.server.gcInterval=360000000 -Xms32m -Xmx256m -Dcom.coexis.syn.clientcommandsconfiglocation=file://localhost//dsdvlp/java/tmijar/firs7/configs/clientcommands.xml -Dcom.coexis.syn.clientconfiglocation=file://localhost//dsdvlp/java/tmijar/firs7/configs/fsbbtd_client.xml -XX:+PrintGCTimeStamps -XX:+PrintGCDetails
java_command: com.coexis.syn.mqmessaging.daemon.RunDaemon -p /dsdvlp/bin/5/lndsfsd_fsbbtd.properties start
Environment Variables:
JAVA_HOME=/dsdvlp/java/jvm/jdk150
CLASSPATH=.:/dsdvlp/java/jar/jconnect520.jar:/dsdvlp/java/jar/vbjapp340.jar:/dsdvlp/java/jar/vbjorb340.jar:/dsdvlp/java/jar/javax_jndi120.jar
PATH=/usr/local/etc:/usr/lang:/usr/openwin/bin:/usr/ucb:/bin:/usr/etc:/usr/local/5/bin:/dsdvlp/bin/5:/dsdvlp/bin/4:/home/app/sybase/5/bin:/home/app/sybase/5/localscripts:/home/app/sybase/5/sqr:/home/app/lang:/home/app/lang/SC2.0.1:/usr/ccs/bin:/usr/local/opt/Acrobat3/bin:/dsdvlp/bin:.
LD_LIBRARY_PATH=/dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc/server:/dsdvlp/java/jvm/jdk1.5.0_03/jre/lib/sparc:/dsdvlp/java/jvm/jdk1.5.0_03/jre/../lib/sparc:/usr/lib:/usr/openwin/lib:/usr/local/5/lib:/dsdvlp/lib/5:/dstest/lib/5:/home/app/sybase/5/lib:/dstest/cats/sun4/lib:/tmitest/Opus/opus/lib
SHELL=/bin/csh
DISPLAY=CLI00184.mfil.local:1.0
OS=5
--------------- S Y S T E M ---------------
OS: Solaris 8 2/02 s28s_u7wos_08a SPARC
Copyright 2002 Sun Microsystems, Inc. All Rights Reserved.
Assembled 18 December 2001
uname:SunOS 5.8 Generic_117350-20 sun4u (T1 libthread)
rlimit: STACK 8192k, CORE 9216k, NOFILE 4096, AS infinity
load average:2.24 2.67 2.68
CPU:total 4 has_v8, has_v9, has_vis1, has_vis2, is_ultra3
Memory: 8k page, physical 8388608k(166384k free)
vm_info: Java HotSpot(TM) Server VM (1.5.0_03-b07) for solaris-sparc, built on Apr 13 2005 03:31:26 by unknown with unknown Workshop:0x550The very first suggestion I have is to move your VM to a more recent update of 1.5.0.
It looks like you are crashing with 5.0u3, and I'm pretty sure 5.0u16 is available. You
don't want to waste your time chasing a bug that's already been fixed. -
JOB RSGENYTT - System core dump
Hi SDN,
While trying to upgrade our 4.6B system to ERP, JOB_RSGENYTT phase stops with a core dump, this is what i've in ST22
Someone knows how i can analyse this :S
regards
Pedro Rodrigues
ABAP runtime errors SYSTEM_CORE_DUMPED
Occurred on 17.11.2007 at 19:53:23
Process terminated by signal 0.
What happened?
Error in the SAP Basis system
ABAP/4 processor detected an internal system error.
The current ABAP program "RSGENYTT " had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server appserver_DEV_00 on host appserver (wp 0)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 8628
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46B"
Application server....... "appserver"
Network address.......... "192.39.0.2"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Database server.......... "appserver"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Aug 16 2007 21:26:12"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2337"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... "SE38 "
Program............. "RSGENYTT "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "RSGENYTT " in
The main program was "RSGENYTT ".
The termination occurred in line 0
of the source code of program " " (when calling the editor 00).
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1260
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1....+....2....+....3....+....4
LV_COUNT 0
0000
0000
LV_INDEX 0
0000
0000
LT_DDYTT Table[initial]
0000FFFD
0000FFFF
LT_DDYTF Table[initial]
0000FFFD
0000FFFF
LT_PUTTB_SHD ############################ #######ï###
000000000000000000000000000020000000E000
00000000000000000000000040000A001000F400
... + 40 ####ð###ð###################$###xæ-?ð#/?
1000F000F000000000008000000020007E23F823
00000800040000000000C0002000430086DF02FF
... + 80 #?4?########################5###
93330000000000000000000000003000
8F4F0000000000000000000000005000
LS_PUTTB_SHD /BEV1/CADD03VTV
2445324444335552222222222222222222222222
F2561F3144036460000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 002 7
2222222222222222333222222222222222232222
0000000000000000002000000000000000070000
... + 120 VLE
22222544
000006C
LV_SHD_DDXTT DDXTT~
445557222222222222222222222222
44844E000000000000000000000000
GC_BASREL_UPDATED U
5
5
LS_PUTTB_SHD-TABNAME /BEV1/CADD03VTV
244532444433555222222222222222
F2561F314403646000000000000000
LS_DDYTT ######
2222222222222222222222222222222222000000
0000000000000000000000000000000000000000
... + 40 ##########
0000000000222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ##########
2222222222220000000000222222222222222222
0000000000000000000000000000000000000000
... + 120 ###### #########
22222222
0000000
SYST ############ï###########################
000000000000E000000000000000000000000000
000000001000F400000000000000000000000000
... + 40 ì#######################################
E000000000000000000000000000000000008000
C40000001000000010000000000000000000C000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000200000000000000000000000
... + 120 ########################################
00000000
0000000
SY-SUBRC 0
0000
0000
%_SSCR[] ############################`###########
0000000000000000000000000000600000000000
0000000000000000000000004000030000000000
... + 40 ################ÿÿÿÿ####################
1000000000000000FFFF00000000000000000000
0000000000001000FFFF41F07000430000000000
... + 80 ################################
00000000000000000000000000000000
00000000000000000000000000000000
10032c92 807d1400 cmp byte ptr ,0x0 ss:062ce90a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp ,ecx ds:070aeb72=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062ce90a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr ,0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr ,0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b4eb8 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b6470 018b4eb8 00000035 dbmssslib!dsql_db_init
031689c4 008f47dc 010035d0 00000035 00000001 018b6470 dbmssslib!DbSlVersion
031689f4 008f1120 00000001 00000000 3f2db20c 00000000 disp+work!
054fffb8 77e64829 03e7bf20 00000000 00000000 03e7bf20 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7bf20 00000000 00000000 kernel32!GetModuleHandleA
List of ABAP programs affected
Type Program Gen. date time LoadSize RollSize
Prg RSGENYTT 17.11.2007 18:56:44 112 3 840 loade
Prg SAPMSSY0 26.03.2001 12:10:18 1 6 512 loade
Prg RSDBRUNT 26.03.2001 12:09:07 19 22 376 loade
Prg RSDBSPBL 26.03.2001 11:21:26 24 6 512 loade
Prg SAPDB__S 01.06.1999 12:10:01 36 1 408 loade
Prg RSDBSPMC 01.06.1999 12:09:54 34 7 728 loade
Typ DDSHDESCR 03.09.1997 03:05:16 955 048 loade
Typ SPPARAMS 07.05.1997 13:10:38 956 024 loade
Prg SAPLSABE 01.06.1999 12:10:15 100 1 288 loade
Prg SAPLSECU 04.04.2001 18:30:22 28 6 608 loade
Prg SAPMSSY3 26.03.2001 10:57:11 269 5 368 loade
Typ ABDBG 25.05.1999 15:31:57 716 1 360 loade
Prg SAPMSSYD 22.03.2001 18:03:09 12 1 336 loade
Prg SAPFSPOR 19.10.1999 09:39:27 59 216 loade
Prg SAPLSCNT 01.06.1999 12:10:15 15 2 624 loade
Prg SAPLSVSM 22.03.2001 17:23:10 61 2 552 loade
Prg SAPLSGUI 26.03.2001 12:08:56 4 3 768 loade
Prg SAPLSTTM 22.03.2001 15:09:40 2 5 392 loade
Prg SAPLSBDC 22.03.2001 15:09:07 6 6 560 loade
Prg CL_DATAPROVIDER=============== 22.03.2001 16:53:29 62 4 128 loade
Typ OBJ_RECORD 14.02.1998 08:30:43 883 048 loade
Prg SAPLSTUP 26.03.2001 11:45:52 16 9 160 loade
Prg SAPLCNDP 26.03.2001 10:57:04 3 15 744 loade
Prg SAPSHDTV 26.03.2001 11:45:07 14 3 864 loade
Prg SAPFGUICNTL 26.03.2001 10:42:02 10 1 408 loade
Prg CL_GUI_CFW==================== 26.03.2001 11:21:21 11 13 192 loade
Prg SAPLOLEA 17.11.2007 13:23:33 5 7 656 loade
Prg SAPLSFES 26.03.2001 12:08:50 7 10 544 loade
Prg SAPLGRFC 22.03.2001 15:08:46 60 1 384 loade
Prg SAPLSTRF 17.11.2007 13:23:33 217 10 424 loade
Prg SAPLSTFI 26.03.2001 12:10:04 216 5 296 loade
Prg SAPLSUGI 17.11.2007 18:56:44 673 35 280 loade
Typ PUTTB_SHD 17.11.2007 11:26:20 682 120 loade
Prg SAPLSUGN 17.11.2007 18:56:44 691 5 296 loade
Typ DDFTX 05.11.1997 02:52:59 224 072 loade
Prg SAPLSDNT 17.11.2007 18:56:44 135 18 368 loade
Prg SAPLSDB1 17.11.2007 11:26:20 114 6 464 loade
Prg SDB1FMSS 04.04.2001 18:30:57 113 4 104 loade
Typ DDXTT 17.11.2007 18:56:44 235 048 loade
Prg RDTCMPTB 17.11.2007 18:56:44 414 10 376 loade
Prg SAPLSDB2 17.11.2007 18:56:44 225 39 216 loade
Prg SAPLSDB3 17.11.2007 18:56:44 271 9 136 loade
Prg SAPLSDD0 17.11.2007 13:23:33 133 5 200 loade
Prg RADIXTOL 01.06.1999 12:09:34 150 2 504 loade
Prg SDB2FDBS 17.11.2007 17:43:27 215 11 784 loade
Prg SAPLSDD2 01.06.1999 12:10:16 237 3 888 loade
Prg SDB2FMSS 17.11.2007 17:43:27 190 17 152 loade
Typ UVERS 16.07.1997 14:46:33 347 072 loade
Typ DD092526V 20.08.1998 11:15:55 781 048 loade
Typ X030L 05.11.1997 03:07:56 709 096 loade
Prg RADBTOUT 01.06.1999 12:09:34 124 10 448 loade
Prg SAPCNVE 01.06.1999 12:10:01 101 168 loade
Prg SAPLSDAD 17.11.2007 18:56:44 935 71 752 loade
List of internal tables
Header of PROG=RSGENYTTDATA=GT_PROT[]
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000000004000000500700000000000007000000
TABH+ 40(20) = 1E0000001E0000001E0000001E000000FFFFFFFF
TABH+ 60(20) = E3000000020000000403000018972D3F00000000
TABH+ 80(20) = 0000000000000000000000000000000000000000
TABH+100(12) = 000000000000000013000000
id = 19 (0x13000000)
fill = 7 (0x07000000)
lineAdmin = 30 (0x1E000000)
lineAlloc = 30 (0x1E000000)
tabi = 0x18972D3F
pghook = 0x00000000
index = 0x00000000
hshook = 0x00000000
btree = 0x00000000
reghook = 0x00000000
lopc = 0 (0x00000000)
occu = 30 (0x1E000000)
rank = 30 (0x1E000000)
loop = -1 (0xFFFFFFFF)
leng = 227 (0xE300)
fcnt = 0 (0x0000)
lock = 0
shrd = 0
access = 1 (stdAccess)
idxKind = 0 (noIndex)
unique = 2 (nonUnique)
cmpMode = 2 (cmpSingleMcmp)
pb_func = 0x00000000
pb_handle = 0x00000000
Directory of application tables (contents)
Program
Name.......... Contents.1........2........3....+....
Directory of data areas (administration information)
Program
No.. Name.......... Lgth Ofsg Type Next Gen date Gen time
SYST
L not assigned 751 0 IN
M /%_LISTTABLE 750 1 CO 0
T global stack 749 1 2 GL
RSGENYTT
A global data 0 3 DA
L constant dat 1 4 LI .0 .0472
L constant dat 2 5 LI .0 .0367
L not assigned 3 6 IN
L SYST 4 7 TA 00
L SY 5 8 TA
L RSJOBINFO 6 9 TA
M /%_SYS%% 7 0 CO
M field symbol 8 1 FS
M /%_SSCR 9 2 CO 0
L VARI 10 3 TA
L PUTTB_SHD 11 4 TA
L DDYTT 12 5 TA
L DDYTF 13 6 TA
M field symbol 14 7 FS
M field symbol 15 8 FS
M field symbol 16 9 FS
SAPMSSY0
A global data 0 0 DA
L constant dat 1 1 LI .0 .077E
L constant dat 2 2 LI .0 .06B8
L not assigned 3 3 IN
L SYST 4 4 TA
L SY 5 5 TA
L RSJOBINFO 6 6 TA
M /%_SYS%% 7 7 CO
M field symbol 8 8 FS
M /%_LISTTABLE 9 9 CO
M /%_SYS000 10 0 CO
L TFDIR 11 1 TA
M field symbol 12 2 FS
M field symbol 13 3 FS
L TRDIR 14 4 TA
L ABMSG 15 5 TA
M field symbol 16 6 FS
L text pool 17 7 TP
RSDBRUNT
A global data 0 8 DA
L constant dat 1 9 LI .0 .1B8A
L constant dat 2 0 LI .0 .1780
L not assigned 3 1 IN
L SYST 4 2 TA
L SY 5 3 TA
L RSJOBINFO 6 4 TA
M /%_SYS%% 7 5 CO
M field symbol 8 6 FS
M /%_SSCR 9 7 CO
L VARI 10 8 TA
L TRDIR 11 9 TA
L TUVID 12 0 TA
L RSVUVINT 13 1 TA
L VARID 14 2 TA
L DFIES 15 3 TA
L SSCRTEXTS 16 4 TA
L SSCRFIELDS 17 5 TA
M /%_DYN_SEL 18 6 CO
M /%_FIELD_SEL 19 7 CO
M /%_RUNT_XX_% 20 8 CO
M field symbol 21 9 FS
M field symbol 22 0 FS
M field symbol 23 1 FS
M field symbol 24 2 FS
M field symbol 25 3 FS
L text pool 26 4 TP
RSDBSPBL
A global data 0 5 DA
L constant dat 1 6 LI .0 .09CE
L constant dat 2 7 LI .0 .0908
L not assigned 3 8 IN
L SYST 4 9 TA
L SY 5 0 TA
L RSJOBINFO 6 1 TA
M /%_SYS%% 7 2 CO
M field symbol 8 3 FS
M /%_RUNT_XX_% 9 4 CO
L text pool 10 5 TP
SAPDB__S
A global data 0 6 DA
L constant dat 1 7 LI .0 .020D
L constant dat 2 8 LI .0 .01B0
L not assigned 3 9 IN
L SYST 4 0 TA
L SY 5 1 TA
L RSJOBINFO 6 2 TA
M /%_SYS%% 7 3 CO
M field symbol 8 4 FS
M /%_SSCR 9 5 CO
L VARI 10 6 TA
L text pool 11 7 TP
A global data 12 8 DA 0
RSDBSPMC
A global data 0 9 DA
L constant dat 1 0 LI .0 .0BD7
L constant dat 2 1 LI .0 .0AE8
L not assigned 3 2 IN
L SYST 4 3 TA
L SY 5 4 TA
L RSJOBINFO 6 5 TA
M /%_SYS%% 7 6 CO
M field symbol 8 7 FS
M /%_SSCR 9 8 CO
M /%_RUNT_XX_% 10 9 CO
1 L DD23L 11 0 TA
1 L DD23T 12 1 TA
1 L RSMDY 13 2 TA
1 M field symbol 14 3 FS
1 L text pool 15 4 TP
SAPLSABE
1 A global data 0 5 DA
1 L constant dat 1 6 LI .0 .014A
1 L constant dat 2 7 LI .0 .0101
1 L not assigned 3 8 IN
1 L SYST 4 9 TA
1 L SY 5 0 TA
1 L RSJOBINFO 6 1 TA
1 M /%_SYS%% 7 2 CO
1 M field symbol 8 3 FS
1 L TRDIR 9 4 TA
1 M field symbol 10 5 FS
1 L text pool 11 6 TP
SAPLSECU
1 A global data 0 7 DA
1 L constant dat 1 8 LI .0 .0918
1 L constant dat 2 9 LI .0 .070B
1 L not assigned 3 0 IN
1 L SYST 4 1 TA
1 L SY 5 2 TA
1 L RSJOBINFO 6 3 TA
1 M /%_SYS%% 7 4 CO
1 M field symbol 8 5 FS
1 L TSL1D 9 6 TA
1 L TPFYPROPTY 10 7 TA
1 M field symbol 11 8 FS
1 L text pool 12 9 TP
RSGENYTT
1 L ABDBG 127 0 TA
SAPMSSY3
1 A global data 0 1 DA
1 L constant dat 1 2 LI .0 .0A38
1 L constant dat 2 3 LI .0 .09BF
1 L not assigned 3 4 IN
1 L SYST 4 5 TA
1 L SY 5 6 TA
1 L RSJOBINFO 6 7 TA
1 M /%_SYS%% 7 8 CO
1 M field symbol 8 9 FS
1 M /%_LISTTABLE 9 0 CO
1 M /%_SYS000 10 1 CO
1 L ABDBG 11 2 TA
1 M field symbol 12 3 FS
1 Y 13 4 LA 0
1 Y 14 5 LA 0
1 Y 15 6 LA 0
1 Y 16 7 LA 0
1 Y 17 8 LA 0
1 Y 18 9 LA 0Hi lucio,
thanks for your quick answer, update of DW didn't work, here you are dev_w22 trace
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:30:29 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 5400
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 5400) [dpxxdisp.c 976]
I MtxInit: -2 0 0
I
I Mon Nov 19 18:30:31 2007
I *** ERROR => New Process with the same PID
ERROR_INVALID_ADDRESS: Attempt to access invalid address. [semnt.c 1513]
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T22
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 183031
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86F10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Mon Nov 19 18:40:15 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
C The IRow interface is supported by this OLEDB provider
M
M Mon Nov 19 18:40:18 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=5400)
When : 11/19/2007 18:40:18.134
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 151c
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b54 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afef2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f90 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 5f4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7be00 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be98 disp+work!<nosymbols>
054fffb8 77e64829 03e7be98 00000000 00000000 03e7be98 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be98 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 139
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 18:40:18 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 183031
B Disconnected from connection 0
B statistics db_con_commit (com_total=5, com_forced=1, com_tx=1)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 5400) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:40:34 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 432
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 432) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 184034
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 158)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 158
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 159)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 159
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M REL APPC ca_blk 72
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQPfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThSysUsrCheck(1,1): check system user T22/U23/M0
M ThSysUsrCheck: clear T22
M DpITmSlotClear: clear slot 22
M DpListRemove: elem 22 not in tmadm_free_list
M DpListInsert: elem 22 already in tmadm_inuse_list
M rdisp/wp_auto_restart = 0
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M TskhLoop: switch back to normal tracel level 1
B
B Mon Nov 19 20:15:39 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=432)
When : 11/19/2007 20:15:39.822
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 10c8
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b44 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afee2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 10c4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7bdf0 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be88 disp+work!<nosymbols>
054fffb8 77e64829 03e7be88 00000000 00000000 03e7be88 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be88 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 1131
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 20:15:39 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 184034
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_forced=2, com_tx=2)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 432) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 20:15:54 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 4492
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 4492) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 201554
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 1165)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 1165
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 1166)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 1166
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M -
Hi
when i run the following Pro*c file in Unix Environment im getting the SEGMENTATION FAULT(CORE DUMP) error. I used DBX to debug the code. I couldnt find out the proper reason for this error form the dbx output.
This is the output i got from DBX.
*signal SEGV (no mapping at the fault address) in _doprnt at 0xfb98736c*
*0xfb98736c: _doprnt+0x2798: stb %o0, [%o1]*
I did the showmemuse and show leaks, the output for this commands :
(dbx) showmemuse
Checking for memory use...
Blocks in use report (blocks in use: 575 total size: 328086 bytes)
Total % of Num of Avg Allocation call stack
Size All Blocks Size
======= ==== ====== ====== =======================================
134876 41% 30 4495 kpummapg < kghgex
18098 5% 1 18098 lxldlbb < lxlinit < kpummpin < kpupin < sqgctx < sqgrct < sqlcmex < sqlcxt
16552 5% 4 4138 kogmapg < kghgex
16516 5% 4 4129 kogmapg < kogmasg
12288 3% 6 2048 nlhtnsl < nlhthnew
10350 3% 5 2070 calloc < nsbGetBFS
9688 2% 1 9688 kouogini < kouoini < kpuinit0 < kpuinit < sqgctx < sqgrct < sqlcmex < sqlcxt
8200 2% 1 8200 findbuf < doprnt < _fprintf < main
8120 2% 4 2030 sqlrlc < sqlcopydfn
8080 2% 1 8080 kpuinit0 < kpuinit < sqgctx < sqgrct < sqlcmex < sqlcxt < main
7168 2% 1 7168 calloc < nsgbliuc < nsgblini < niotns < nigcall < osncon < kpuadef < upiini
7168 2% 3 2389 lxldlod < lxdlobj
5976 1% 4 1494 sqlrlc < sqlcopydfn
4640 1% 1 4640 sqlrlc < sqldrl < sqlexp < sqlcmex < sqlcxt < get_pub_dates < main
4640 1% 1 4640 sqlrlc < sqlbrl < sqlexp < sqlcmex < sqlcxt < get_pub_dates < main
4128 1% 1 4128 calloc < nsgbliuc < nsgblini < niotns < nigcall < osncon < kpuadef < upiini
4024 1% 1 4024 sqlrlc < sqlbrl < sqlexp < sqlcmex < sqlcxt < get_pub_dates < main
3408 1% 1 3408 sqlrlc < sqldrl < sqlexp < sqlcmex < sqlcxt < get_pub_dates < main
2452 <1% 8 306 calloc < nsmal
2156 <1% 7 308 calloc < nlemfins
(dbx) showleaks
Checking for memory leaks...
Actual leaks report (actual leaks: 1 total size: 30 bytes)
Total Num of Leaked Allocation call stack
Size Blocks Block
Address
====== ====== ========== =======================================
30 1 0x9c9c8 getOutFileName < main
Possible leaks report (possible leaks: 0 total size: 0 bytes)
i know its because of Pad pointer and something related to Pointer or array overflow. But i couldnt find out where exactly happening....
Following is my Code, please help me to find out the error and what i need to change in my code:
#ifndef ORA_PROC
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <ctype.h>
#include <math.h>
#else
typedef struct FILE FILE;
#endif
/*** Added by TCS Begins ***/
char getOutFileName(char );
char getEnvVar(char );
void prepare_declare_oracle_cursors();
void get_calendar_dates();
void get_issues();
void get_master_cusip_no();
void get_run_date_finish();
void get_payments();
int get_pub_dates();
void get_rights();
void get_s_h_meetings();
void get_special_codes();
void get_agents();
void get_currency();
void get_payment_codes();
void get_issue_codes();
void get_standard_footnotes();
void get_index_codes();
void get_exchanges();
void get_tax_codes();
void get_tenders();
int check_if_holiday(int );
void sql_error(int , int , char *);
void login_error();
void no_pub_dates();
void no_cal_dates();
void no_finish_date();
void save_payment_footnote(char , char [3],int , char );
void save_issue_footnote(char );
int print_footnotes();
int print_foreign_tax();
int get_partial_run_time();
void save_rght_footnotes();
int print_supplimental();
int convert_tender_price(char *);
void pad_s_h_meetings();
int strip_out_codes(char *);
char *getSqlLogonString();
/**** TCS ADD Ends ****/
EXEC SQL INCLUDE sqlca;
EXEC SQL INCLUDE ddr_create_all_tapes.h;
#define TRUE 1
#define ORA_NOT_FOUND ( sqlca.sqlcode == 1403 )
/* The Definitions of SUCCESS and FAILURE were switched to test the
idea that SUCCESS should be Zero and FAILURE should be Non-Zero
#define SUCCESS 1
#define FAILURE 0
#define SUCCESS 0
#define FAILURE -1
#define SYSOK 0
#define SYSERR 1
#define DEBUGGING 0
#define DEBUG_LEVEL 0
/* #define DEBUGGING 1
#define DEBUG_LEVEL 2
int first_cal_date;
int footnote_count;
int foreign_count;
int last_cal_date;
int total_records;
int which_tape = 0;
char cusip_table_name[30];
char field_type_code;
char final_cusip_number[10];
/**** char footnote_text[300][300];
char foreign_text[60][100]; **** Commented by TCS as per the change request ****/
/*** Added by TCS as per the change request ***/
char footnote_text[200][300];
char foreign_text[200][300];
/*** TCS Add Ends ***/
char freq_type_code;
char init_cusip_number[10];
char rec_type_code;
char payment_where_clause[600];
char rights_where_clause[600];
char tenders_where_clause[600];
char s_h_meet_where_clause[600];
char last_run_time[18];
char supp_info_buffer[321];
int call_flag;
int tenders_flag;
int rights_flag;
int s_h_meet_flag;
int rght_foot_pos;
double hold_double;
int hold_int;
char hold_char[100];
int i=0;
FILE *fp;
FILE pfp; / this is used for a report file to correspond to
the partial tape file */
int main(int argc, char argv[]) / Modified by TCS */
char ddr_tape_name[100];
char ddr_partial_rpt[100];
char copyright_notice[100];
long file_position;
char *logname;
/* READ IN PARAMETERS AND SET UP VARIABLES */
memset (oracle_uid.arr, 0, sizeof(oracle_uid.arr));
memset (oracle_pwd.arr, 0, sizeof(oracle_pwd.arr));
strcpy (oracle_uid.arr, argv[1]);
oracle_uid.len = strlen(oracle_uid.arr);
strcpy (oracle_pwd.arr, argv[2]);
oracle_pwd.len = strlen(oracle_pwd.arr);
printf("Calling getSqlLogonString");
logname = getSqlLogonString();
which_tape = atoi(argv[1]);
memset (last_run_time, 0, sizeof(last_run_time));
if ( ( DEBUGGING ) && ( DEBUG_LEVEL > 1 ) )
printf ("Oracle username: %s\n", oracle_uid.arr);
printf ("Oracle password: %s\n", oracle_pwd.arr);
printf ("Oracle username/password@database: %s\n", logname); /** Added by TCS **/
printf ("Which Tape: %d\n", which_tape);
hold_double = 0.0;
hold_int = 0;
memset (hold_char, ' ', sizeof(hold_char));
EXEC SQL WHENEVER SQLERROR DO login_error();
/* EXEC SQL CONNECT :oracle_uid IDENTIFIED BY :oracle_pwd; */
EXEC SQL CONNECT :logname ;
printf ("Connected to ORACLE... \n");
EXEC SQL WHENEVER SQLERROR continue;
get_pub_dates();
memset (ddr_tape_name, 0, sizeof(ddr_tape_name));
memset (ddr_partial_rpt, 0, sizeof(ddr_partial_rpt));
memset (cusip_table_name, 0, sizeof(cusip_table_name));
memset (payment_where_clause, 0, sizeof(payment_where_clause));
memset (rights_where_clause, 0, sizeof(rights_where_clause));
memset (tenders_where_clause, 0, sizeof(tenders_where_clause));
memset (s_h_meet_where_clause, 0, sizeof(s_h_meet_where_clause));
/* SET UP VARIABLES BASED ON THE DIFFERENT FREQUENCY OF TAPE */
switch (which_tape)
case 0:
get_partial_run_time();
/*sprintf (ddr_tape_name,
"idb_tape$out:ddr_partial%1d.asc", p_count); ** Comented by TCS **/
sprintf (ddr_tape_name,"%s%1d.%s",getOutFileName("DDR_PARTIAL"),p_count,getEnvVar("DDR_PARTIAL_EXT_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_PARTIAL_TAPE_TABLE");
/*sprintf (ddr_partial_rpt,
"idb_tape$out:ddr_partial%1d.rpt", p_count); ** Commented by TCS **/
sprintf (ddr_partial_rpt,"%s%1d.%s",getOutFileName("DDR_PARTIAL"),p_count,getEnvVar("DDR_PARTIAL_EXT_RPT")); /* Added by TCS */
get_calendar_dates();
freq_type_code = '0';
sprintf (payment_where_clause,
"AND PYMT_PUB_DATE IS NULL \
AND ((PYMT_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND PYMT_ADD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (PYMT_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND PYMT_UPD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_from.arr, p_to.arr, p_from.arr, p_to.arr);
sprintf (rights_where_clause,
"AND RGHT_PUB_DATE IS NULL \
AND ((RGHT_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND RGHT_ADD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (RGHT_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND RGHT_UPD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_from.arr, p_to.arr, p_from.arr, p_to.arr);
sprintf (tenders_where_clause,
"AND TNDR_PUB_DATE IS NULL \
AND ((TNDR_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND TNDR_ADD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (TNDR_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND TNDR_UPD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_from.arr, p_to.arr, p_from.arr, p_to.arr);
sprintf (s_h_meet_where_clause,
"AND SMTG_PUB_DATE IS NULL \
AND ((SMTG_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND SMTG_ADD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (SMTG_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI') \
AND SMTG_UPD_DATE_TIME < TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_from.arr, p_to.arr, p_from.arr, p_to.arr);
break;
case 3:
/* PARTIAL 5 */
get_partial_run_time();
p_count = 5;
/**sprintf (ddr_tape_name,
"idb_tape$out:ddr_partial%1d.asc", p_count); ** Comented by TCS **/
sprintf (ddr_tape_name,"%s%1d.%s",getOutFileName("DDR_PARTIAL"),p_count,getEnvVar("DDR_PARTIAL_EXT_ASC")); /* Added by TCS */
/* for testing only I am using seperate TABLE */
/**strcpy (cusip_table_name,
"IDB.DDR_PARTIAL5_TAPE_TABLE"); ** Commented by TCS **/
strcpy (cusip_table_name,
"IDB.DDR_PARTIAL_TAPE_TABLE");
/*sprintf (ddr_partial_rpt,
"idb_tape$out:ddr_partial%1d.rpt", p_count); ** Commented by TCS **/
sprintf (ddr_tape_name,"%s%1d.%s",getOutFileName("DDR_PARTIAL"),p_count,getEnvVar("DDR_PARTIAL_EXT_RPT")); /* Added by TCS */
get_calendar_dates();
freq_type_code = '3';
sprintf (payment_where_clause,
"AND ( (PYMT_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (PYMT_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_to.arr, p_to.arr);
sprintf (rights_where_clause,
"AND ((RGHT_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (RGHT_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_to.arr, p_to.arr);
sprintf (tenders_where_clause,
"AND ((TNDR_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (TNDR_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_to.arr, p_to.arr);
sprintf (s_h_meet_where_clause,
"AND ((SMTG_ADD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')) \
OR (SMTG_UPD_DATE_TIME >= TO_DATE('%15.15s', 'DD-MON-RR HH24:MI')))",
p_to.arr, p_to.arr);
break;
case 1:
/**strcpy (ddr_tape_name,
"idb_tape$out:ddr_daily_tape.asc"); ** Commented by TCS **/
sprintf (ddr_tape_name,"%s",getOutFileName("DDR_DAILY_TAPE_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_DAILY_TAPE_TABLE");
get_calendar_dates();
freq_type_code = '1';
sprintf (payment_where_clause, "AND (PYMT_PUB_DATE \
= TO_DATE('%s','DD-MON-RR') OR PYMT_PUB_DATE IS NULL)", pub_to_date.arr);
sprintf (rights_where_clause, "AND (RGHT_PUB_DATE \
= TO_DATE('%s','DD-MON-RR') OR RGHT_PUB_DATE IS NULL)", pub_to_date.arr);
sprintf (tenders_where_clause, "AND (TNDR_PUB_DATE \
= TO_DATE('%s','DD-MON-RR') OR TNDR_PUB_DATE IS NULL)", pub_to_date.arr);
sprintf (s_h_meet_where_clause, "AND (SMTG_PUB_DATE \
= TO_DATE('%s','DD-MON-RR') OR SMTG_PUB_DATE IS NULL)", pub_to_date.arr);
break;
case 5:
/*strcpy (ddr_tape_name,
"idb_tape$out:ddr_weekly_tape.asc"); ** Commented by TCS **/
sprintf (ddr_tape_name, "%s",getOutFileName("DDR_WEEKLY_TAPE_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_WEEKLY_TAPE_TABLE");
get_calendar_dates();
freq_type_code = '2';
sprintf (payment_where_clause, "AND (PYMT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR PYMT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (rights_where_clause, "AND (RGHT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR RGHT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (tenders_where_clause, "AND (TNDR_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR TNDR_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
/* ram - 6/28/95 - reverted back to original criteria: */
/* include on weekly tape based on pub-date, regardless of */
/* whether in calendar or not */
sprintf (s_h_meet_where_clause, "AND (SMTG_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR SMTG_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
break;
case 12:
/* ram - 7/13/95 */
/* changed monthly "6" to "12" */
/*strcpy (ddr_tape_name,
"idb_tape$out:ddr_monthly_tape.asc"); ** Commented by TCS **/
sprintf (ddr_tape_name, "%s", getOutFileName("DDR_MONTHLY_TAPE_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_MONTHLY_TAPE_TABLE");
freq_type_code = '3';
sprintf (payment_where_clause, "AND (PYMT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR PYMT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (rights_where_clause, "AND (RGHT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR RGHT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (tenders_where_clause, "AND (TNDR_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR TNDR_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
break;
case 8:
/*strcpy (ddr_tape_name,
"idb_tape$out:ddr_quarterly_tape.asc");** Commented by TCS **/
sprintf (ddr_tape_name,"%s",getOutFileName("DDR_QUARTERLY_TAPE_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_QUARTERLY_TAPE_TABLE");
freq_type_code = '3';
sprintf (payment_where_clause, "AND (PYMT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR PYMT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (rights_where_clause, "AND (RGHT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR RGHT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (tenders_where_clause, "AND (A.TNDR_TENDER_DATE \
= TO_DATE('%s','DD-MON-RR'))", pub_to_date.arr); break;
case 9:
/*strcpy (ddr_tape_name,
"idb_tape$out:ddr_annual_tape.asc"); ** Comented by TCS **/
sprintf (ddr_tape_name,"%s", getOutFileName("DDR_ANNUAL_TAPE_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_ANNUAL_TAPE_TABLE");
freq_type_code = '4';
sprintf (payment_where_clause, "AND (PYMT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') \
OR PYMT_PUB_DATE = TO_DATE('29-OCT-1929','DD-MON-YYYY'))",
pub_from_date.arr, pub_to_date.arr);
sprintf (rights_where_clause, "AND (RGHT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR RGHT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (tenders_where_clause, "AND (A.TNDR_TENDER_DATE \
= TO_DATE('%s','DD-MON-RR'))", pub_to_date.arr); break;
case 15:
/*strcpy (ddr_tape_name,
"idb_tape$out:ddr_general_tape.asc"); ** Commented by TCS **/
sprintf (ddr_tape_name,"%s", getOutFileName("DDR_GENERAL_TAPE_ASC")); /* Added by TCS */
strcpy (cusip_table_name,
"IDB.DDR_GENERAL_TAPE_TABLE");
freq_type_code = '3';
sprintf (payment_where_clause, "AND (PYMT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR PYMT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (rights_where_clause, "AND (RGHT_PUB_DATE \
BETWEEN to_date('%s','DD-MON-RR') AND to_date('%s','DD-MON-RR') OR RGHT_PUB_DATE IS NULL)",
pub_from_date.arr, pub_to_date.arr);
sprintf (tenders_where_clause, "AND (A.TNDR_TENDER_DATE \
= TO_DATE('%s','DD-MON-RR'))", pub_to_date.arr); break;
default:
exit (printf ("Invalid tape option: %d\n", which_tape)); /*** %s changed by TCS to %d ***/
break;
if ((fp = fopen(ddr_tape_name, "w+")) == NULL)
exit (printf ("Unable to open asc <%s> file for write access\n",
ddr_tape_name));
/* GR. Partial 5
if (which_tape == 0 || which_tape == 3 )
if ((pfp = fopen(ddr_partial_rpt, "w+")) == NULL)
exit (printf ("Unable to open asc <%s> file \
for write access\n", ddr_partial_rpt));
/* WRITE THE HEADER RECORD ON THE TAPE */
memset (copyright_notice, 0, sizeof(copyright_notice));
sprintf (copyright_notice, "COPYRIGHT (c) %.4s STANDARD & POOR'S \
CORPORATION. ALL RIGHTS RESERVED", year.arr);
fprintf (fp, "%-80.80sDIVIDEND%8d%17.17s ",
copyright_notice, control_date, run_date_start.arr);
file_position = ftell(fp);
fprintf (fp, "\n");
total_records = 0;
/* GET THE SPECIAL CATEGORY RECORDS */
get_special_codes();
/* SELECT FROM THE DRIVER TABLE TO GET ALL THE OTHER RECORDS */
get_master_cusip_no();
printf("After get_master_cusip_no()");
get_run_date_finish();
printf("After get_run_date_finish()");
if ( DEBUGGING )
printf ("initial cusip = %s\n", init_cusip_number);
printf ("final cusip = %s\n", final_cusip_number);
printf ("record type is %c\n", rec_type_code);
/* WRITE THE TRAILER RECORD */
fprintf (fp, "%8d%-17.17s%07d%-9.9s1%-9.9s%c\n", control_date,
run_date_finish.arr, total_records, init_cusip_number , final_cusip_number,
rec_type_code);
/* re-wind and add to the header record ... */
rewind(fp);
fseek(fp, file_position - 33, 0);
fprintf (fp, "%07d%-9.9s1%-9.9s%c", total_records, init_cusip_number,
final_cusip_number, rec_type_code);
fclose(fp);
/* GR Partial 5
if (which_tape == 0 || which_tape == 3 )
fclose(pfp);
printf ("\nDONE: %07d%-9.9s1%-9.9s%c\n", total_records, init_cusip_number,
final_cusip_number, rec_type_code);
return (0); /*** Added by TCS ***/
void prepare_declare_oracle_cursors() /* Modified by TCS */
/* We'll us dynamic sql to get the appropriate where clause but use */
/* a bind variable for the master cusip number. So we prepare and */
/* declare get_issues, get_payments, get_tenders, get rights, and */
/* get_s_h_meetings cursors only once, outside the driving loop. */
EXEC SQL BEGIN DECLARE SECTION;
/**** TCS Comment begins as per the change request ****
VARCHAR sql_stmt1[1500];*/ /* issues */
/*VARCHAR sql_stmt2[3000]; *//* payments */
/*VARCHAR sql_stmt3[500]; *//* tenders */
/*VARCHAR sql_stmt4[500]; *//* rights */
/*VARCHAR sql_stmt5[500]; *//* s_h_meetings */
/**** TCS Add begins as per the change request ****/
VARCHAR sql_stmt1[2000]; /* issues */
VARCHAR sql_stmt2[4000]; /* payments */
VARCHAR sql_stmt3[1000]; /* tenders */
VARCHAR sql_stmt4[1000]; /* rights */
VARCHAR sql_stmt5[1000]; /* s_h_meetings */
/**** TCS Add ends ****/
EXEC SQL END DECLARE SECTION;
/* prepare and declare the get_issues cursor */
memset (sql_stmt1.arr, 0, sizeof(sql_stmt1.arr));
sprintf (sql_stmt1.arr, "SELECT \
A.ISSU_PAR_VALUE, \
DECODE (A.ISSU_MARKET_SYMBOL||A.ISSU_NASDAQ,'OTCY','NASD', A.ISSU_MARKET_SYMBOL), \
A.ISSU_C_RATE, A.ISSU_C_FREQ, A.ISSU_C_NEW_AMOUNT, A.ISSU_C_NEW_Q1, \
A.ISSU_C_NEW_Q2, A.ISSU_C_NEW_Q3, A.ISSU_C_OLD_AMOUNT, A.ISSU_C_OLD_Q1, \
A.ISSU_C_OLD_Q2, A.ISSU_C_OLD_Q3, A.ISSU_CURRENCY, \
A.ISSU_UPD_HIS, A.ISSU_COMMENT, A.TAX_EXEMPT_FLAG,\
B.SEC_TYPE_CODE, B.ACQ_BY_IND, B.ACQ_ISSUER_NO, \
rtrim(substr(B.ACQ_ISSUER_DESCR,1,30)), \
B.INDEX_CODE, B.TRFR_AGT_CODE, B.NY_AGT_CODE, B.TICKER_SYMBOL, \
B.TICKER_SYMBOL2, \
rtrim(substr(C.ISSR_DDR_ISSUER_DESCR,1,60)), \
rtrim(substr(E.ISSUE_DESCR,1,30)), \
rtrim(substr(D.ISSUER_DESCR1,1,30)), \
F.TRFR_DAYS \
FROM IDB.DDR_ISSUES A, IDB.DDR_ISSUES_2 B, IDB.DDR_ISSUERS C, \
BLIS.CUSIP_ISSUERS D, BLIS.CUSIP_ISSUES E, IDB.DDR_TRANSFER F \
WHERE A.ISSU_CUSIP_NO = :master_cusip_no \
AND A.ISSU_CUSIP_NO = B.ISSU_CUSIP_NO(+) \
AND SUBSTR(A.ISSU_CUSIP_NO, 1, 6) = C.ISSR_ISSUER_NO(+) \
AND SUBSTR(A.ISSU_CUSIP_NO, 1, 6) = D.ISSUER_NO \
AND A.ISSU_CUSIP_NO = E.CUSIP_NO \
AND A.ISSU_TRANSFER_CODE = F.TRFR_TR_CD(+) ");
sql_stmt1.len = strlen(sql_stmt1.arr);
EXEC SQL PREPARE ISSUES FROM :sql_stmt1;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in preparing ISSUES");
EXEC SQL DECLARE ISSUES_C CURSOR FOR ISSUES;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring ISSUES");
/* now the get_payments cursor */
memset (sql_stmt2.arr, 0, sizeof(sql_stmt2.arr));
sprintf (sql_stmt2.arr, "SELECT \
a.PYMT_RP_DIV, \
a.PYMT_RP_DEC, \
a.PYMT_RP_EXD, \
a.PYMT_RP_REC, \
a.PYMT_RP_PAY, \
a.PYMT_RP_DUE, \
a.PYMT_RP_TAX, \
a.PYMT_RP_ANN, \
a.PYMT_PRP_DIV, \
a.PYMT_PRP_DEC, \
a.PYMT_PRP_EXD, \
a.PYMT_PRP_REC, \
a.PYMT_PRP_PAY, \
a.PYMT_PRP_DUE, \
a.PYMT_PRP_TAX, \
a.PYMT_PRP_ANN, \
NVL(a.PYMT_SEQ_NO,0), \
TO_CHAR(a.PYMT_DECLARED, 'YYMMDD'), \
TO_CHAR(a.PYMT_EX_DATE, 'YYMMDD'), \
TO_CHAR(a.PYMT_STK_REC, 'YYMMDD'), \
TO_CHAR(a.PYMT_TRANSFER_DATE, 'YYMMDD'), \
TO_CHAR(a.PYMT_PAYABLE, 'YYMMDD'), \
a.PYMT_CODES, \
NVL(a.PYMT_CASH_DIVD,0.0), \
NVL(b.ORDINARY_INCOME,0.0), \
NVL(b.CAP_GAINS,0.0), \
NVL(b.SHORT_TM_CAP_GAINS,0.0), \
NVL(b.LONG_TM_CAP_GAINS,0.0), \
NVL(b.RETURN_OF_CAPITAL,0.0), \
b.STK_DIVD_IND, \
NVL(a.PYMT_STK_DIVD,0), \
b.FRAC_IN_CASH_STK_IND, \
NVL(b.FRAC_IN_CASH_PRICE,0.0), \
NVL(a.PYMT_SPLIT_NEW,0), \
NVL(a.PYMT_SPLIT_OLD,0), \
TO_CHAR(a.PYMT_DB_DATE, 'YYMMDD'), \
NVL(b.ARREARS_PAID,0.0), \
NVL(b.ARREARS_DUE,0.0), \
b.SPINOFF_IND, \
b.SPINOFF_ISSUE_NO, \
b.SPINOFF_ISSUER_DESCR, \
b.SPINOFF_ISSUE_DESCR, \
NVL(b.TAX_CODE,0), \
NVL(b.TAX_CODE_2,0), \
NVL(b.OLD_SEQ_NO,0), \
b.ORDINARY_INCOME_CODE, \
b.CAP_GAINS_CODE, \
b.SHORT_TM_CAP_GAINS_CODE, \
b.LONG_TM_CAP_GAINS_CODE, \
b.RETURN_OF_CAPITAL_CODE, \
TO_CHAR(b.CALL_DATE, 'YYMMDD'), \
NVL(b.CALL_PRICE,0.0), \
b.CALL_PRICE_CURRENCY, \
b.CALL_AGT_NO, \
b.ACCRUED_DIVD_IND, \
TO_CHAR(a.PYMT_DB_DATE, 'YYMMDD'), \
a.PYMT_DB_TEXT, \
a.PYMT_DVD_TEXT, \
a.PYMT_YEAR, \
TO_CHAR(a.PYMT_STK_REC, 'fmMon dd'), \
TO_CHAR(a.PYMT_DB_DATE, 'fmMon dd'), \
b.NY_CALL_AGT_NO, \
NVL(b.FOREIGN_TAX_RATE, 0.0), \
NVL(b.NET_RATE, 0.0), \
NVL(b.FEE, 0.0), \
NVL(b.COMMISSION, 0.0), \
a.PYMT_CASH_DIVD_FNS, \
a.PYMT_STK_DIVD_FNS, \
a.PYMT_DECLARED_FNS, \
a.PYMT_EX_DATE_FNS, \
a.PYMT_STK_REC_FNS, \
a.PYMT_PAYABLE_FNS, \
a.PYMT_SPLIT_FNS, \
NVL (TO_NUMBER (TO_CHAR(a.PYMT_PUB_DATE, 'YYYYMMDD')), 0), \
NVL (TO_NUMBER (TO_CHAR(a.PYMT_TRANSFER_DATE, 'YYYYMMDD')), 0), \
NVL (TO_NUMBER (TO_CHAR(a.PYMT_STK_REC, 'YYYYMMDD')), 0), \
NVL (TO_NUMBER (TO_CHAR(a.PYMT_DB_DATE, 'YYYYMMDD')), 0) \
FROM IDB.DDR_PAYMENTS A, IDB.DDR_PAYMENTS_2 B \
WHERE A.PYMT_CUSIP_NO = :master_cusip_no \
AND A.PYMT_CUSIP_NO = B.PYMT_CUSIP_NO (+) \
AND A.PYMT_SEQ_NO = B.PYMT_SEQ_NO (+) \
AND NVL(INSTR(A.PYMT_CODES,'CO'),0) NOT IN (1,3,5,7,9,11) ");
strcat (sql_stmt2.arr, payment_where_clause);
sql_stmt2.len = strlen(sql_stmt2.arr);
EXEC SQL PREPARE PAYMENTS FROM :sql_stmt2;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in preparing PAYMENTS");
EXEC SQL DECLARE PAYMENTS_C CURSOR FOR PAYMENTS;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring PAYMENTS");
/* now the get_tenders cursor */
memset (sql_stmt3.arr, 0, sizeof(sql_stmt3.arr));
/* FXL ADD SUBSTR to tndr_price_qual: substr(A.TNDR_PRICE_QUAL,1,14), 3/23/99,
to to_number 3/29/99 */
sprintf (sql_stmt3.arr, "SELECT \
B.TNDR_AGT_NO, \
B.NY_AGT_NO, \
TO_CHAR(A.TNDR_TENDER_DATE, 'YYMMDD'), \
A.TNDR_PRICE, \
to_number(A.TNDR_PRICE_QUAL), \
A.TNDR_TE_SIZE, \
TNDR_TE_TEXT_1 \
FROM IDB.DDR_TENDERS A, IDB.DDR_TENDERS_2 B \
WHERE TNDR_CUSIP_NO = :master_cusip_no \
AND TNDR_CUSIP_NO = TNDR_ISSUE_NO(+) \
AND A.TNDR_TENDER_DATE = B.TNDR_TENDER_DATE(+) ");
strcat (sql_stmt3.arr, tenders_where_clause);
sql_stmt3.len = strlen(sql_stmt3.arr);
EXEC SQL PREPARE TENDERS FROM :sql_stmt3;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in preparing TENDERS");
EXEC SQL DECLARE TENDERS_C CURSOR FOR TENDERS;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring TENDERS");
/* now the get_rights cursor */
memset (sql_stmt4.arr, 0, sizeof(sql_stmt4.arr));
/* ADD TO_CHAR(A.RGHT_DB_DATE, 'YYMMDD') */
sprintf (sql_stmt4.arr, "SELECT \
B.NO_RIGHTS_ISSUED, \
B.SHS_REQ_FOR_PURCH, \
B.RGHTS_REQUIRED, \
B.QTY_SHS_PURCHASED, \
B.TYPE_SHS_ELIGIBLE, \
B.NEW_SHS_CUSIP_NO, \
B.NEW_CO_ISSUER_DESCR, \
TO_CHAR(A.RGHT_RECORD, 'YYMMDD'), \
TO_CHAR(A.RGHT_EX_DATE, 'YYMMDD'), \
TO_CHAR(B.NYC_RECORD_DATE, 'YYMMDD'), \
TO_CHAR(A.RGHT_EXPIRE, 'YYMMDD'), \
TO_CHAR(A.RGHT_DB_DATE, 'YYMMDD'), \
A.RGHT_PRICE, \
NVL(A.RGHT_RECORD_FNS,' '), \
NVL(A.RGHT_EXPIRE_FNS,' '), \
NVL(A.RGHT_EX_DATE_FNS,' '), \
NVL(A.RGHT_PRICE_FNS,' '), \
NVL(A.RGHT_BASIS_FNS,' '), \
A.RGHT_FOOTNOTE, \
B.US_INELIGIBILITY_IND, \
B.RGHT_TRFR_IND \
FROM IDB.DDR_RIGHTS A, IDB.DDR_RIGHTS_2 B \
WHERE RGHT_CUSIP_NO = :master_cusip_no \
AND RGHT_CUSIP_NO = RGHT_ISSUE_NO(+) \
AND A.RGHT_RECORD = B.RGHT_RECORD_DATE(+) ");
strcat (sql_stmt4.arr, rights_where_clause);
sql_stmt4.len = strlen(sql_stmt4.arr);
EXEC SQL PREPARE RIGHTS FROM :sql_stmt4;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in preparing RIGHTS");
EXEC SQL DECLARE RIGHTS_C CURSOR FOR RIGHTS;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring RIGHTS");
/* ram - added logic on 7/18/95 */
/* for the standard footnotes cursor */
EXEC SQL DECLARE STANDARD_FOOTNOTES_C CURSOR
FOR
SELECT SFTN_S_F_TEXT, SFTN_S_F_TYPE
FROM IDB.DDR_STANDARD_FOOTNOTES
WHERE SFTN_S_F_TYPE = :standard_footnote_type;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring STANDARD_FOOTNOTES");
/* now the issue footnotes cursor */
EXEC SQL DECLARE ISSUE_FOOTNOTES_C CURSOR
FOR
SELECT FTNT_F_TEXT, FTNT_F_TYPE
FROM IDB.DDR_FOOTNOTES
WHERE FTNT_CUSIP_NO = :master_cusip_no
AND FTNT_SYMBOL = :footnote_symbol
AND FTNT_YEAR IS NULL;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring ISSUE_FOOTNOTES");
/* now the payment footnotes cursor */
EXEC SQL DECLARE PAYMENT_FOOTNOTES_C CURSOR
FOR
SELECT FTNT_F_TEXT, FTNT_F_TYPE
FROM IDB.DDR_FOOTNOTES
WHERE FTNT_CUSIP_NO = :master_cusip_no
AND FTNT_SYMBOL = :footnote_symbol
AND FTNT_YEAR = :footnote_year;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring PAYMENT_FOOTNOTES");
/* now the get_s_h_meetings cursor */
/* ONLY for certain tape types. */
/* GR PARTial 5
if (which_tape == 0 || which_tape == 3 || which_tape == 1 || which_tape == 5)
memset (sql_stmt5.arr, 0, sizeof(sql_stmt5.arr));
/* ram - 6/15/95 - changed ORigunal to smtg */
/* TO_CHAR(ORIGINAL_REC_DATE, 'YYMMDD'), \ */
sprintf (sql_stmt5.arr, "SELECT \
TO_CHAR(SMTG_MTG_DATE, 'YYMMDD'), \
TO_CHAR(SMTG_REC_DATE, 'YYMMDD'), \
SMTG_FOOTNOTE \
FROM IDB.DDR_S_H_MEETINGS \
WHERE SMTG_CUSIP_NO = :master_cusip_no ");
strcat (sql_stmt5.arr, s_h_meet_where_clause);
sql_stmt5.len = strlen(sql_stmt5.arr);
EXEC SQL PREPARE S_H_MEET FROM :sql_stmt5;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in preparing S_H_MEET");
EXEC SQL DECLARE S_H_MEET_C CURSOR FOR S_H_MEET;
if (sqlca.sqlcode)
sql_error (SYSERR, sqlca.sqlcode,
"Error in declaring S_H_MEET");
} /* end of if (which_tape == 0 || which_tape == 1 || which_tape == 5) */
/* replaced get_calendar_dates function with use of PLSQL - ram - 5/24/95 */
void get_calendar_dates() /* Modified by TCS */
/* put first and last calendar dates into global ints */
/* first_cal_date and last_cal_date (YYYYMMDD) using */
/* ddr package function get_business_days. */
/* The package object ddr is owned by idb, so I'll */
/* specify this, just in case accounts other than idb */
/* run this code. (EXECUTE priviledge is granted to */
/* "idb_user" role.) */
EXEC SQL BEGIN DECLARE SECTION;
int cal_start;
int cal_end;
int return_val;
EXEC SQL END DECLARE SECTION;
/* initialize destination globals */You actually need to run it with "check -access"; memuse and leaks won't help with the crash, which happens because of illegal memory access. Hopefully, "check -access" will help you to locate the bad guy, but that's not panacea either.
To be precise:
- start dbx
$ dbx <your app>
- issue
(dbx) check -access
(dbx) run
and wait for dbx to stop and report suspicious memory access.
Maybe you are looking for
-
HT3702 I got a bill for something that doesn't work, how do I dispute it?
Ok, so I ordered pinger's textfree without ads hoping it would speed it up, but it doesn't work. How do I dispute the charge? thanks!
-
Why can't a user see all files in a network share?
Windows Server 2008 R2 is sharing a folder. Advanced Sharing permissions give Everyone Full Control. NTFS Permissions give the OU "Operations" read/modify permissions. In the Operations OU, 1 user (let's call him John) cannot see all the files in thi
-
Problem in passing/returning objects over dynamic web service call
Hi Friends, I am beginner in java web service. Here is the problem I am facing when I pass/return user defined objects to remote web service method using dynamic we service call. The client can call the remote web service method in 2 ways. 1. By gene
-
Hi I'm new to iphone development, I'm working in at view based app for ipad in which I need to get information from a web service the problem is that I don't know how to consume the Web Service from the app .... Plzz help me with it Thanks in advance
-
Macbook Pro 1.83ghz Woes - continiously being fixed - never working :(
I have a Macbook Pro 1.83Ghz Intel Core Duo - with lots of problems. Back in November, it had problems with the Fans making a clunking / grinding noise and - the fans were replaced as well as the LogicBoard... This worked for up until a few weeks ago