AJA Xena SD card and FMLE audio problems

I have a system running Windows XP and a AJA Xena SD card. The video streams/looks great but I can't get the audio to work. The audio is distorted and running super slow -- like you've slowed down the audio track. Any one had success using this card? Any solutions on how to fix the audio issue?

Do you mean audio quality suffers when using mp3 at 44100 Hz?
Is your problem similar to one being discussed in this thread - http://forums.adobe.com/thread/204657?tstart=0

Similar Messages

HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

PP CC 2014 and P2 Audio Problem?!?

I'm having a rather frustrating problem with Premiere Pro Cc 2014 and P2 clips. If I have an extended clip (over 4 minutes) the audio will suddenly flatline at about that point. Usually during interviews. Here is the timeline:
I've tried importing through the media browser and sending from Prelude with the same problem each time. That same clips comes in fine with PP CC. I just downloaded the update to 2014 and still have the problem.
Ideas???

Hi Mark,
I currently have this same condition on a project I am working on. I have loads of information that may be helpful. Here is the rundown:
The clip in question runs 6:38;03
The audio (all four channels) drops out at 5:00;11
in Premiere Pro the waveform disappears as well at 5:00;11
in Prelude, the waveform disappears at the same timecode, however the audio still plays.
The clip was originally imported using Prelude in its original P2 format as well as transcoded to Apple ProRes 4:2:2. The original footage still resides on the P2 card. The clips were also copied over a network to backup storage which is now at another location. I do not know if the condition followed.
I have imported the P2 clip from my hard drive, the original P2 clip from the card and the ProRes clip from my hard drive using the media browser for all three.
Both P2 clips drop out at the same time
The Pro Res clip has all the audio.
There has been no restarts or project opening closings since discovering the problem. I can maintain the current condition if you would like to use my situation for troubleshooting. Please let me know ASAP so I can plan accordingly.
Peter

Installed New VGA Card and Lost Audio

(Please forgive my ignorance or stupidity when it comes to any computer knowledge. In 'Layman's Terms', I am what you would call an idiot when it comes to computers, sorry...)
I just installed MSI VGA Card 'MD512D3', 512MB, DDR3 onto my HP Pavillion a1710n desktop computer that is running Windows 7 and after the installation, the first thing that I noticed was the fact that all of my computer's audio had disappeared. I have been trying to trouble shoot the problem through various forums and I have tried pretty much every single solution that had been given to others with the same sort of problem. But then it occurred to me, why don't I uninstall the new VGA card and run the computer without it like I had been doing before. so I did the uninstallation and immediately, the audio drivers appeared in my Windows update and so now I have audio again on my computer. But my question is this, the audio that I was using prior(and here is one of the times that you will need to forgive my ignorance), I believe they were analog. The best way that I could describe them is that they had the connections to the computer that were color coordinated, i.e. "green" "pink" "blue", etc and I was primarily just using the "green" connection for basic stereo sound(nothing fancy). I just happened to look at the box for the new VGA card and it specifies that it has HDMI Output which, if I am not mistaken, is a digital output that requires a completely different connection. Can someone explain to me(in the most BASIC of terms), if this is, in fact, a digital output that requires a different set of speakers for audio or if I am able to use the 'analog' speakers that I currently have? Now, keep in mind that I would LOVE to just go out and purchase the most expensive and up to date audio products but I am limited by my income...thanks in advance for any information that you are able to provide me...Dan

The card supports Audio via HDMI. If you connect it via HDMI to a screen with speakers or speakers connected to the screen which is connected via HMDI the Nvidia HD audio is used. If Scrren has no speakers Nvidia HD audio can't be used. It should then use the soundcard or onboard sound of your board which the spreakers are connected to.

HP Pavilion dv9218tx Notebook PC and HDMI audio problem with Sony TV and Windows 7

Sound does not come through with the HDMI connection and, on investigation, there is no HDMI audio driver/option.
Noting that there seemed to be an issue with windows 7 and HDMI audio which is addressed by updating the BIOS and the connexant sound driver I have done so to no effect.
The Sony TV is recognised as a standard monitor in the devices for graphics but not for audio
Suggestions as to why HDMI does not appear - including as a disabled service - and what to do t get is available?

Hello everyone,
Thanks for posting on the HP Forums!
I will definitely assist you with lack of sound issues. Before anything else is done, please make sure you try every step in this thread: Troubleshooting Guide: Audio does not Work after a Certain Period of Time
If every step does not help, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
5. What steps have been attempted from my first post on this thread, and what were the results?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Either way, let me know what happens. Thanks!
Mario
I worked on behalf of HP.

Copying, pasting and editing audio problem?

hi, i have some audio tracks that i originally recorded in pro tools le
(no plugin delay compensation if using uad's or other 3rd party plugs dont even go there by the way)
and have exported them to logic 8 and changed the arrangment for a song.
The problem is when i cut and paste sections of an audio track to a different part of the song, if i trim, cut, mute or pull it back it changes the part of the audio that i originally pasted it from?
how do i stop this from happening?
can anyone help
thanks

Once you've copied/pasted the new region to where you want it, select the new region and press:
OptionCmdF
You will then be prompted to give a new filename for the audio file. This generates a new file, which can be edited separately from the original.

EPIC and disturbing audio problem in FCE

I'm editing footage I shot in DV standard on my Canon HV30 in Final Cut Express. I originally imported with iMovie HD and then dragged the files over to final cut later. I rendered all the audio, but when I went back to play it, the audio was strangely looped over itself and repeating. It's hard to explain, and even harder to understand because the audio is of a crowd at a sporting event and therefore not predictable. After listening for a few seconds, and inexplicably loud tone started blaring. It sounded like it was about 300 Hz (by ear, not any real method of measurement). I checked out the audio waveform and nothing looks out of the ordinary, and I can play audio from other programs without any problem. My question is, what the heck is wrong with final cut? An explanation can't really do this justice; I practically had a heart attack, the tone was so loud and unexpected. Does anyone have any idea what this could be from?
Thanks.

The underlying issue is that iMovie and FCE capture DV video differently. You can import an iMovie DV clip into FCE but it will always require rendering of the audio in FCE ... but even then the results are not always predictable.
iMovie captures DV video as *QuickTime DVstream,* essentially as-is from the tape; this means that +the audio & video are interleaved,+ which actually makes editing the audio difficult. (on a miniDV tape, the recording is made up of 10 slanted tracks per NTSC frame, each track containing video, audio & control data for its portion of the frame ... giving you some idea of the complexity of the interleaving).
FCE captures DV video as *QuickTime DV-NTSC (.mov)*, (in North America) putting the audio & video into +separate, parallel, linked tracks+ in the QuickTime file; as a result the audio does not require rendering and it is much easier to edit.
Rendering the audio of a .dv clip in FCE only creates an audio render file that is associated with the original clip; it does not convert the clip to QuickTime DV-NTSC (.mov).
MPEG Streamclip is the utility you should use if you want to convert files from QuickTime DV (.dv) to QuickTime DV-NTSC (.mov).

Editing in Multicam and having audio problems....

HI there,
I am a new PCPX user and learning quickly. Loving it! I have been editing 3 different shows in Multi Cam editing and haven't had any problems as of yet with
audio. On the third one now, and I've selected my main track and also selected "enable video switching only". Only the audio is switching. I've matched the audio,
which is helping but it's still noticeable to me and driving me insane....
Like I said, new to this, so not entirely familiar with ins & outs of FCPX yet! Thanks!

It seems to work fine when I add transitions....I have no idea, since I didnt change anything. The other segment on the same timeline still plays the other audio. It's driving me nuts! Active Angle & Audio shows what its supposed to. Chalk it up to a fluke or glitch in the program? Not the first one i've had either, the other day it wouldn't render. Shut it down and restarted to work fine. Is this normal for a newly purchased program???

FMLE Audio Problem

I'm running FMLE 3.0 and when I stream things from my computer onto Livestream, I keep getting two repeating patterns:
1. Is the audio plays, but then stops, and then loops over and over and over again.
2. Each loop gets repeatedly bigger and begins to build up the static that I cannot stand.
Any help with this?

It seems as if a feed back loop has been created at your system. This generally happens when you subscibe to your published stream on the same computer from which you are publishing. It happens because, the audio coming out of your speakers from the subscribed content becomes the input of your microphone, and hence an infinite loop, which finally ends being a static(as you are seeing). Try switiching of your speakers while you are streaming, or connect headphones to listen to the subscribed content to prevent such kind of feedback loop from happening.
Hope this helps.

I am trying to register on windows azure using credit card and getting some problem.

Hi,
I'm trying to register on the Windows azure and everything works fine until I get into the Payment Information (Step #3) screen. I’m trying to pay with my Master Card but I receive the following
error message:
We can't authorize the payment method. Please make sure the information is correct, or use another payment method. If you continue to get this message, please contact your financial institution.

Hi,
It is a common issue for registration. It is really hard to find where is wrong. What I can suggest you is first double check the credit card information which is valid and correct. Check your LiveID with correct and enough data to meet any related
information during registration. Of course, make sure the country of the credit card is available in the list of Windows Azure. Also as the message says you can consult the financial institution for the payment method. You can try these channels for help:
https://support.microsoft.com/oas/default.aspx?gprid=17024&st=1&wfxredirect=1&sd=gn
http://support.microsoft.com/gp/customer-service-phone-numbers
Thanks,
QinDian Tang
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

IOS6.1 and streaming audio problems

I have an iPhone 4, and a Peugeot 308. I have been happily streaming music from my phone through the Bluetooth without any issues other than the occasional mystery loss of pairing.
Since updating to iOS 6.1 last week, I can continue to use the Bluetooth for calls, but audio streaming refuses to connect. I have tried forgetting the device and pairing it again, with no success. A friend's iPhone that has not been updated to iOS 6.1 is working just fine. My own was working fine until last week on iOS 6.0.1.
Any thoughts? Go back to 6.0.1? How?

I'm sorry you've run into this audio bug. Please see this FAQ for instructions on reverting to a previous version of Flash Player.
How do I revert to a previous version of Flash Player?

Sunpci3 card and XP video problems

I recently installed three pci3 boards into three sparc 150 machines. After install of the software and install of XP professional I encountered a problem. When XP loads, the desktop background (grassy hills) appears, but you can't see anything else. Everything is there because if you know where to click you can do so and see the hourglass appear and the screen do something, BUT the only thing that will ever be visible in the pci3 window itself will be the background. Basically I can't see anything but the background. If I start XP in safe mode OR if I start it in VGA mode, I can see and do everything. In safe mode, it looks normal, it's just slow. In VGA mode, the screen actually looks funny (like VGA), but I can't control the mouse at that point. I even installed more RAM in the system to bring me to 1Gig thinking that would work, but no such luck.
Does anyone have any ideas or suggestions? I am at a loss and don't want to have to purchase $2500 in KVM switches. Thanks in advance.

Yes same here.
The stutters are dreadful and sound keeps going of and on.
This is a Smart phone, But so far my K700 which is over 2 years old is smarter.
I just dont understand why, Nokia if you are reading this then please fix in your next firmware, Real Player is either Rubbish or the phone some how cant transfer the data / details over fast enough.
On some occasions opening up a video can take the phone over a 1min which i then think the phone has crashed.
Its like my computer when running more than 1 programme at a time, They start to stutter.

Saving movie and score- audio problem

hi
I am saving movie and score, but after I have finished doing this and then watch back the saved movie in Quicktime, the audio is sounding very muted, the bass it too heavy and the balance of the tracks is not how they play back or sound when i listen to them in Logic.
Would anyone know why this might be and how to solve it?
thanks

Hey Hangtime, give you permission to kick me in the head! I feel stupid now knowing that it is a silly user error. Here I was trying to figure out if its in the 'Details' frame.
In otherwords, 'Detail's is set to '>' and not pointing downwards.
Funny thing is, you would think there would be a scroll bar to move up and down to reveal the Movie Preview frame if the 'Details' pane is expanded in the Track Info window.
In any case... Thanks HT!

Credit Card and Billing Address Problem

Hi!
My Credit Card is from the US, but i live in Canada. When entering my Credit Card info for getting the Adobe Cloud, it automatically has a fix "Canada" as billing address. It wont let me change it, what should i do? The Credit Card adresse is fixed to the one in the US and cant be changed.
Thanks for helping!
xxx

Hello Serhanmuftahi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918?viewlocale=nl_nl&locale=nl_nl
If your account information doesn't match your credit card, you may get a message stating "The credit card was declined."
Best of luck,
Mario

Mac Pro Locked Up and Now One Video Card and Audio Not Working

Last night, my Mac Pro totally locked up to the point I had to power it off to get it to do anything. When restarted, one of my video cards and my audio are no longer working. I have dual monitors so tried switching the connections to see if it was the monitor and that was not the problem.
I tried doing a formal shutdown after the restart and this also did not clear up my problem.
Everything was working fine prior to the lockup. Any suggestions would be much appreciated.

If you've added RAM and are using the nVidia 9400m video driver, you may be using incompatible RAM
http://www.nvidia.com/docs/IO/60555/MemoryCompatibility_List_DA-04576-001v01.pdf
My wife's MB is locking up when watching videos; hulu, iTunes, VLC. The above is the only answer I've found.
BOL

AJA Xena SD card and FMLE audio problems

Similar Messages

Maybe you are looking for