AJAB-Error AFAB-Not allowing repeat run

Dear Friends
User executed AFAB in 12-2008 and since period was still open, asset retirement was posted in period 12-2008. As a result of this, the asset net book value is open by the amount of depreciation which was posted for the period 12-2008. We tried all options such as- Recalculate depreciation from asset master data, activated asset again, opened period 12-2008 and trying to run AFAB -Repeat run for period 12- 2008 in test mode for such retired assets only and system does not show any asset values in AFAB and no error log is also created. What could be the reason for this? AJAB gives an error due to these retired asset as planned depreciation -dep which was posted for 12- 2008 is shown in AS03 also as planned depreciation to be reversed for such assets is not completely posted. Tried posting with AFAB in period 13 and planned posting run also, but nothing happens with AFAB. I have following questions
What could be reason for these assets not being depreciated by repeat run of AFAB.
What is the solution for resolving the error -Planned depreciation not completely posted- in AJAB
If AJAB is not run, can we still post depreciation for period 1- 2009
Thanks and regards

Hi Kylie and AP,
Many thanks for the quick response. I reversed the retirement document and it corrects the situation and now no error in AJAB. But if I still run AFAB in test mode for repeating the run, I don't get any values for the asset. This is because, depreciation was already posted in period 12, 2008 and now there is nothing to post for depreciation. I am not sure if we can do repeat run of AFAB in 12,2008 and retire the asset again in period 12, 2008.
Just to clarify the following part: Did you mean to do this in 2008? Pl. clarify how do I do the following? This is because AFAB is not going to post anything for repeat run in 2008 as I described below and if we repeat retirement in 2008, then the same error will appear in AJAB.
You'll need to reverse the retirements and then run the depreciation program in repeat mode.
You should be able to then retire the assets, and perform year-end close.
Thanks and regards.

Similar Messages

Entry-SQL syntax error: CASE not allowed

Hello All. When I use sap netweaver developer to develop webdynpro applications, I always meet that jdbc error.
when using inner join,left join, or using case when in the sql, it will pop up Entry-SQL syntax error.
But I have run the sql in Microsoft SQL Server studio successfully.
The SQL statement "UPDATE SAPNWDDB.Z_SERIAL SET LASTSERIAL = CASE WHEN ENDWITH IS NOT NULL THEN CASE WHEN LASTSERIAL + 1 > ENDWITH THEN ISNULL(STARTWITH, 0) ELSE LASTSERIAL + 1 END ELSE LASTSERIAL + 1 END WHERE SERIALNO = ?" contains the syntax error[s]: - 1:43 - Entry-SQL syntax error: CASE not allowed
- 1:78 - Entry-SQL syntax error: CASE not allowed
- 1:124 - SQL syntax error: the token "(" was not expected here
Can someone help me? Thank you.

Hi Arun Jaiswal ,
Thank you for your answer. But I have tried query in sql editor. Actually it can work. Other than "CASE" syntax, it seems not support inner join and left join in webdynpro either. I even can not query the db views.
That's imposible jdbc not support these simple syntex. I wonder there is any config control the sql compatibility level.
I have developped a java programm to test it. It is ok. No error. But the same case pop up error in java webdynpro application.I don't know why.
I am entry level webdynpro developper.
Hopefully you can help me.
Thank you.
Edited by: zegunlee330 on Sep 3, 2010 4:18 AM

Hey guys, when i try and log in to itunes, even though the details are correct it is showing up as an error and not allowing me access to my account.. could anyone help??

Hey guys, when i try and log in to itunes, even though the details are correct it is showing up as an error and not allowing me access to my account.. could anyone help?

what is the error?

Bug?: rxvt-unicode not allowed to run top, irssi and so on

Didn't know where to post this, please tell me if I'm on the wrong place.
With the latest RXVT-unicode-package (from comunity), I'm not allowed to run programs like top, screen and irssi in it. I've tried to install it on two diferent computers, with the same result:
[kristian@localhost ~]$ top
'rxvt-unicode': unknown terminal type.
[kristian@localhost ~]$ screen
Cannot find terminfo entry for 'rxvt-unicode'.
[kristian@localhost ~]$ irssi
setupterm() failed for TERM=rxvt-unicode: 0
Can't initialize screen handling, quitting.
You can still use the dummy mode with -d parameter
I've seen this happen with earlier binary pacages of "rxvt-unicode." I'm not quite sure how I fixed i back then. I might have built it myself with a PKGBUILD from this forum.
I can't find urxvt in "/usr/share/terminfo/". I think that's what causes these problems.
EDIT: Found a cvs-vesion on the aur that works. LINK

ozar wrote:http://bbs.archlinux.org/viewtopic.php?t=14317
It's the same bug. Witch means that we'll let this thread die. (I'll mention it in the thread you liked to, yust to be shure.)
Well, I think it's the same. But the file doesn't look blank...
Thanks

ASA5550 port channel configuration ERROR: nameif not allowed on empty etherchannel interface

Hi All,
I am having problem when configure port channel on asa5550
IOS ver asa914-k8.bin also in ver 9.02   and 8.47.
Please let me know how can I solve this problem.
UK-LON-FW(config)# int port-channel 3
UK-LON-FW(config-if)# vlan 245
                       ^
ERROR: % Invalid input detected at '^' marker.
UK-LON-FW(config-if)# nameif secure
ERROR: nameif not allowed on empty etherchannel interface.
UK-LON-FW(config-if)#
here is my interfaces configuration:
interface GigabitEthernet0/0
description fw1:G0/0 to uk-lon-gw1:e1/8 fw2:G0/0 to uk-lon-gw2:e1/9 outside zone
channel-group 1 mode on
no nameif
no security-level
no ip address
interface GigabitEthernet0/1
description fw1:G0/1 to uk-lon-gw2:e1/8 fw2:G0/1 to uk-lon-gw1:e1/9 outside zone
channel-group 1 mode on
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
description fw1:G0/2 to uk-lon-sw1a:1 fw2:G0/2 to uk-lon-sw1a:2 dmz
channel-group 2 mode on
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
description fw1:G0/3 to uk-lon-sw1b: fw2:G0/3 to uk-lon-sw1b:2 dmz
channel-group 2 mode on
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 0
ip address 10.10.51.18 255.255.254.0
interface GigabitEthernet1/0
description fw1:G1/0 to uk-lon-sw1a:3 fw2:G1/0 to uk-lon-sw1a:4 secure zone
no nameif
no security-level
no ip address
interface GigabitEthernet1/1
description fw1:G1/1 to uk-lon-sw1b:3 fw2:G1/1 to uk-lon-sw1b:4 secure zone
no nameif
no security-level
no ip address
interface GigabitEthernet1/2
description LAN Failover Interface
no nameif
no security-level
no ip address
interface GigabitEthernet1/3
description STATE Failover Interface
no nameif
no security-level
no ip address
interface Port-channel1
description outside zone
no nameif
no security-level
no ip address
interface Port-channel1.5
description outside zone Bundle FW:G0/0-G0/1 connect to GW1:e1/8-GW2:e1/8
vlan 5
nameif outside
security-level 0
ip address 216.239.105.5 255.255.255.128 standby 216.239.105.6
interface Port-channel2
description dmz Bunlde uk-lon-fw:G0/2-3 to sw1a:1-2 sw1b:1-2
no nameif
no security-level
no ip address
interface Port-channel2.105
description dmz
vlan 105
nameif dmz
security-level 50
ip address 216.239.105.193 255.255.255.192 standby 216.239.105.194
interface Port-channel3
description secure zone Bunlde uk-lon-fw:G1/0-1 to sw1a:3-3 sw1b:3-4
no nameif
security-level 100
ip address 10.254.105.1 255.255.255.0 standby 10.254.105.2
UK-LON-FW(config-if)#

Hi Marvin,
Thank you for your answer. I did everything but it did not work. Turn out it is a bug ver 8.45 will let you created the sub logical interface but actually it did not work right. Verson 9.x doesn't let you create more than 2 port channel (limitation of ASA5550 hardware).
https://tools.cisco.com/bugsearch/bug/CSCtq62715/?reffering_site=dumpcr
Also, you can see the 8.4 release notes were you can see that it is not supported:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/release/notes/asarn84.html#pgfId-522232
Interface Features
EtherChannel support (ASA 5510 and higher)
You can configure up to 48 802.3ad EtherChannels of eight active interfaces each.
Note You cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM in slot 1 on the ASA 5550, as part of an EtherChannel.
We introduced the following commands: channel-group , lacp port-priority , interface port-channel , lacp max-bundle , port-channel min-bundle , port-channel load-balance , lacp system-priority , clear lacp counters , show lacp , show port-channel .

Error Indexing not allowed when marking indexing for document HR_DOC

Hello all,
We are able to solve the first problem. Now we have the following error
"Error Indexing not allowed when marking indexing for document HR_DOC"
Has anyone idea on how to solve it?
Thanks a lot.
Best regards,

....and thanks a lot for your feedback in resolving this issue!

6131 - Radio error message 'not allowed'?

I've been using the radio feature without a problem since I got the phone (June) and since today all I get is an error message "not allowed". I have no clue what is going on as it was working perfectly fine last Friday?
I checked software updates and I have the most current already. All other functions are fine.
Help!

Same thing has just happened to me. Did you find a solution? I would be very grateful for advice as I am a not very technical grandmother

Org.xml.sax error content not allowed in prolog

Hi,
I am running Jetty 6.x on SUSE and there is a webapp called pyjasper i am trying to run on it. the context maps fine and it displays the content however, when i use the applet in the webapp to create a report (.jasper) it gives me a org.xml.sax Parse exception: content not allowed in prolog.
A little part of the error is pasted below:
generating report /tmp/pyJasper/compiled-reports/6390c37d0ea810c7fae3e647c2f86817.jasper
Parse Fatal Error at line 1 column 1: Content is not allowed in prolog.
org.xml.sax.SAXParseException: Content is not allowed in prolog.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:1039)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
at org.apache.commons.digester.Digester.parse(Digester.java:1647)
at net.sf.jasperreports.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:239)
at net.sf.jasperreports.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:226)
at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:214)
at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:168)
at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:152)
at net.sf.jasperreports.engine.JasperCompileManager.compileReportToFile(JasperCompileManager.java:115)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
2010-03-04 09:15:59.073::WARN: /pyJasper/jasper.py
at net.sf.jasperreports.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:243)
at net.sf.jasperreports.engine.xml.JRXmlLoader.loadXML(JRXmlLoader.java:226)
at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:214)
at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:168)
at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:152)
at net.sf.jasperreports.engine.JasperCompileManager.compileReportToFile(JasperCompileManager.java:115)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
I am guessing this is some sort of an error in xml parsing. I found couple of solutions on sun java forums but none of them worked for me. Right now I am trying to figure out whether this is being caused by the applet or the java itself.
Apparently other people who use this applet do not have a problem and they have the exact same files as me. So I am not sure what exactly is causing tihs problem. Bit of a noob.
Any help would be greatly appreciated.
THANK YOU VERY MUCH!!!! :)

Hi thanks you very much for the reply.
In my message I forgot to mention that I edited my prologs to "<?xml version = "1.0" encoding = "UTF-8"?>" and the jetty.xml that has the server configuration has:
<?xml version = "1.0" encoding = "UTF-8"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
I apologize for the clarity of my message. I meant to say that I was wondering whether the problem is with the xm files that java has, or the xml files that are in the pyjasper package that I downloaded?
I also checked for byte order mark using hex editor to see if those six characters were in front of my xml files. None of the files in the pyjasper package had the BOM so that solution did not work.
Is there something wrong with the above xml prolog?
I have been reading tons of different posts and stuf trying to figure this out for the past month but juts cannot seem to get it to work.
Thanks.

Error: "Duplicates not Allowed"

Hi,
So today I restarted my computer and skype opened automatically like it normally does. Everything was fine but then when I clicked tools to change the settings, it said "Duplicates not allowed." I restarted skype multiple times to no avail. I also tried clearing the settings by deleting the DbTemp folder and so on. Help would be very much appreciated.
Thanks

This is a known issue with the latest Skype 7.1 version on a computer where there are 2 identical video or audio capture devices installed.
http://community.skype.com/t5/Windows-desktop-client/Error-quot-Duplicates-not-allowed-quot/m-p/3858...
Please, run the DirectX diagnostics tool (do not press the Run 64-bit DxDiag button).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Skype 7.1: Error "Duplicates not allowed"

Same issue with Skype throwing a duplicates not allowed error when trying to access options from the tools drop down menu. Not able to configure webcam options. I've done all the preliminary actions of recreating the Skype folder in %appdata% and deleting the dbtemp folder. I've run the dxdiag process and attached the results in a zip file. Webcam drivers are up to date. Please let me know next steps.
Win7 Home Premium
x64
Logitech Pro 9000 Webcam
Skype 7.1
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏9 KB

Hi All,
Unfortunately, you can't blame the Hauppauge WinTV Tv Tuner Cards in their entirely at all.
I am running the latest version of Skype for Windows 7,1,0.105, And I have No problems running Skype on this computer at all.
I don't have Skype loading on this computer when the computer is booting up. When I want to use Skype on this computer, I simply launch the computer when I want to.
No where does it say that you need to launch Skype when the computer starts up.
You can keep the latest version of Skype on the computer, just don't load it, when the computer is booting up. It will work just fine.
Attachments:
2015-02-27 - Skype No Problems.jpg ‏419 KB

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error 404--Not Found - while running report in 11g

Dear All ,
I have my oracle application in 10g R1. Now we are migarting that to 11g .
There is a temporary directory where we are generating report output (PDF)
we are using an alias name web_reps for this folder .
Given the AliasMatch in forms.conf and in registry given the alias name for FORMS_MAPPING .
It was working with 10g . Tried the same in 11g so that report is generating in the folder (PDF)
but while openeing the file using web.showdocument () using the alias name it is giving the below error .
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If any body know this issue pls help .
Thanks
Jyo

Are you using apache in front of your weblogics, or just plain weblogic? Also please post the full version of your 11g installation (11.1.1.x or 11.1.2.x). If you are using no apache and the 11.1.1.x version for development (without apache) the forms servlet and the reports servlet are deployed on different weblogic instances running on a different port; meaning forms is available under e.g.
http://ias:9001/forms/frmservlet
whereas reports is available under
http://ias:9002/reports/rwservlet
but when running reports via web.show_document it assumes both are running on the same port. Also make sure your weblogic instances are up and running. So either you use apache for production (in 11.1.1.x or 11.1.2.x) or you go for 11.1.2 in development where the forms and the reports servlets are deployed on the very same port. As far as I am concerned I'd go for 11.1.2 as the production environment is nothing different from 11.1.1 and the development environment is a hell of a lot easier to install.
cheers

Error 404 -- NOT FOUND when running a form in form 11g

Hi All,
I got this problem when I run the forms using internet explorer.
I work on Forms 11g which uses weblogic 10.3 for web deployment of the forms.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can any one tell me where it went wrong.
Thanks

Let's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).

Getting the error column not allowed here in jdbc

i have got an error
when using jdbc.
i have inserted the data from taking java textfields.
The error is:column not allowed here.
how to rectify this?
iam eagerly waiting for ur reply.

Hi,
This is the forum for the SQL Developer Data Modeler product.
I suggest you try asking your question on the SQL and PL/SQL Forum: PL/SQL
David

Local lookup home error (Error: getEJBLocalObject not allowed)

While getting a lookup for a localobject, getting error as below:
using OC4J 9.0.3 container. Example is for 1-M bidirectional relationship
Entity A <--------> Entity B (e.g. Project and Employee)
Here is the code written within EntityB:
localEntityAHome = (LocalEntityAHome) ServiceLookupHelper.getFactory().lookUpLocal(EntityAEjbJndiName,LocalEntityAHome.class);
LocalEntityA localEntityA = null;
localEntityA=localEntityAHome.findByPrimaryKey(new Long(100));
setEntityAEjb_cust_id(localEntityA);
Error:
The Exception is .... com.evermind.server.rmi.OrionRemoteException: Transaction was rolled back: Error in ejbCreate: java.lang.IllegalStateException: getEJBLocalObject not allowed or not successful [1]; nested exception is: java.lang.IllegalStateException: getEJBLocalObject not allowed or not successful [1] com.evermind.server.rmi.OrionRemoteException: Transaction was rolled back: Error in ejbCreate: java.lang.IllegalStateException: getEJBLocalObject not allowed or not successful [1]
Any idea about the cause of the problem?
Thanks in advance,

I think I've got the same problem,
Did you manage to fix it ?

AJAB-Error AFAB-Not allowing repeat run

Similar Messages

Maybe you are looking for